Hello,
I’m new user owner of Atrix with unlocked bootloader and from yesterday after root of the phone I met following problems:
The phone can’t be recognized by PC and can’t be charged, after each restart the phone automatically going to Clockwork Mod recovery and this is repeated each time when I reboot or start the phone. Even after restoring my phone from restore point before root this issue was not solved.
The only way that I can use the phone is when after restart holding the volume down button and choosing “BP HW Diag & Boot AP” but in this case, I cannot charge my phone and connect to PC.
Did some body else meet this problem and how can be solved.
Thanks in advance for your help.
Related
Hi,
seeing there's so many flash and root Q's i'de love to bundle evryones problems and how you solved em in 1 thread.
can go from not reading/understanding the guides to just about anything really.
heres mine,
* running FlashTool_0.2.9.1-GBready_root_xRec and giving me a "drivers" error message
- went to the unzipped map of flashtool/drivers and installed em on my PC
* not detecting my phone after downgrading loader/kernel
- rebooting my PC worked
* in most guides after the rooting step it told me to reboot phone and reselect usb debugging and allowing non-market apps to be installed but its stuck on SE logo (even said this could take up to 5 min but it just wouldnt reboot)
- case of misunderstanding i suppose , what i was supposed to be doing and what worked after rooting is selecting the flash upgrade. take out battery. unplug phone. reconnect phone. hold back button. insert battery while still holding back button.
* not rebooting after flash upgrade (stuck at SE logo)
- forgot to unplug my phone before turning it back on (while still running flastool dont know if this matters or not)
think thats about all my problems i had while rooting/flashing the phone
hope this helps someone out there!
Hi Helpers,
I successfully rooted my phone for 2 days, I had backed up apps and the system data by Titanium Back stored in the SD. But when I restore that back-up data, my phone was brick, it reboots itself and hang on SONY logo, i used to stop the bootloop by press and hold the hard stop button in the backside of the phone, but it still reboots by itself, i also wait for the battery discharge its energy then recharge the phone, but it reboot again. Unfortunately, after finishing rooted, I had disable USB debug, so the flashtool can not connect/detect my phone to use flashmode to flash the firmware. (My phone still not unlock bootloader)
Please help me rescue my phone, many many thanks to the helper.
The FW : 12.0.A.0.2.245
I used this link to root my phone http://forum.xda-developers.com/showthread.php?t=2405933
My phone restarted one day and just wouldn't boot up. At first it was just stuck on the SAMSUNG logo, but after trying to boot into recovery, it now sits at the boot animation. When I try to boot into recovery, the CWM screen will come up, but no menu will show up, and then the phone will restart after a few minutes and go back to being stuck on the boot animation.
I can enter Download Mode, but USB Debugging must be disabled since ADB won't recognize the device and I can't send any commands (yes, drivers are installed).
First of all, is there any way I can recover the data on the phone? That is more important than getting the phone working, since I was just about ready to get a new phone anyway.
What can I do to get the phone working? Everything involving flashing a new kernel, or resetting the phone back to factory seem to require a working recovery or the ability to send commands through ADB, but I'm probably missing something, since there must something else that I can do.
Any help is greatly appreciated. Thanks.
**Not sure if this is related or not, but the reason why the phone restarted before this issue occurred is because the power button on the phone is a bit faulty. Over the past couple months I've been having issues with the power button; it seems overly sensitive so when I push it sometimes the screen will turn on and off and other times the phone will just restart as if I held the button down for too long. This is the main reason why I was ready to get a new phone.
Hi. So today, i was using my 1 year old phone when suddenly, the power/reboot screen appeared and my phone rebooted. It then started to loop every 2-3 seconds. I tried recovery mode but i coudn't hold the volume button long enough before it rebooted. I had USB debug and a bunch of other dev settings on allready and tried to use ABD but my PC didn't recognize my device. I then put the phone away for a while and turned it on. It worked. But then, it re-entered the loop and it worked again. It now is in a stable position, i recovered all my data. I suppose this may be a hardware problem but i don't know much. What do I do/how shall I fix it preferably without having to go to a repair center or something?
You can try to install stock rom but first adb must detect your phone. Make sure you install the adb/fastboot drivers and the USB drivers for your phone.
See this: https://www.mass-soft.com/download-huawei-nova-plus-official-usb-drivers/
Hello community,
I haven't posted here before, so I hope I'm not doing anything wrong.
I have a problem with my Neffos X1 and after browsing the internet for hours nothing helped so far, so I hope some of you can help me out.
My phone is stuck in a bootloop since yesterday evening. I haven't done any updates or new installations recently, so it just happened out of the blue. It loads till the Neffos logo and then restarts over and over again.
Since I can't take the battery out, I tried letting it run out of energy and then restart, but as soon as I connect it to a power source the bootloop will start again.
I read a lot about getting it in recovery mode or to try and flash it, but no matter what combination of buttons I try, nothing is happening. The phone basically doesn't react to anything and just keeps restarting. The only thing I noticed is, that when pushing both volume keys the screen will just stay black (no restarting), but after letting go the bootloop will start again.
I tried flashing it via SP Flash Tools, but the phone also doesn't react to it.
Lots of troubleshooting guides also require, that I have rooted my phone in the past, unfortunatly I haven't. I also read about unlocking the bootloader, but since my phone isn't reacting to any buttons and my laptop also doesn't seem to recognize my phone (probably because it doesn't boot proberly), that doesn't seem like a solution either.
To summarize: I'm stuck in a bootloop with no recovery mode, no rooting, no unlocking bootloader, probably can only use my laptop to do anything remotely.
So, is there anything you can think of, that might help me get out of the bootloop? Or ideas of what I may did wrong when trying the other solutions?
Thanks for any help in advance.
Same problem
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Shotzo said:
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Click to expand...
Click to collapse
Try this
Download phone's Stock Firmware onto your personal computer.
Install the USB MTK Drivers - NOT ANY OTHERS (skip if you have them already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your phone via USB to the computer>> holding volume + and volume – button of your phone at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug phone and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.