I have Juopunutbear's S-OFF Hboot 1.50 and want to upgrade to Hboot 1.58 via official ICS OTA update. Do I need to relock my phone via Juopunutbear or can just update to 1.58 via OTA update and then use Juopunutbear to unlock Hboot 1.58?
vega312 said:
I have Juopunutbear's S-OFF Hboot 1.50 and want to upgrade to Hboot 1.58 via official ICS OTA update. Do I need to relock my phone via Juopunutbear or can just update to 1.58 via OTA update and then use Juopunutbear to unlock Hboot 1.58?
Click to expand...
Click to collapse
You don't need to relock to use the RUU or do the wire trick again afterwards since you will stay S-OFF after updating to ICS.
This post contains my recommendation for someone else in a similar situation, although he had the 1.4 bootloader installed. The same process should work for you using the download in the OP of that thread.
The reason to flash the JuopunutBear Sprint ICS (1.58.5858) bootloader is to allow you to run the fasboot commands like flash, erase and boot. If you don't care about that, just stay with the 1.58 bootloader that the RUU.exe installs.
ramjet73
I used HTCdev to unlock the bootloader, to root it, and i have installed TWRP 2.3.3 recovery. I have HBOOT 2.09 right now too. I am currently running MeanBean 3.0 right now as my ROM. I am currently S-ON and want to know the proper way to go about S-OFF so i can flash the 3.16 firmware and update my radios and pri. What would be the correct steps now to S-OFF so I can do this?
The system requirements, necessary packages, and instructions are listed on the unlimited io website
Just follow these instructions http://forum.xda-developers.com/showthread.php?t=1964309
Sent from my EVO using xda premium
Thank you!
This phone is currently on 3.16 and 3.02 MeanBean Hboot 1.19 S-Off I need to RUU to correct some NV issues would it brick it to RUU 3.15 or will I have to wait until a 3.16 RUU is released?
I do believe you risk the chance of bricking your phone if you attempt to ruu backwards.
#Root-Hack_Mod*Always=LTE
Thats exactly what I am trying to avoid. It seems like it was on a newer baseband before I did the Dirty Racun S-Off though and it set it to an older one. This phone has been flashed to pageplus and I wrote something to the radio or nv items it didn't like and it killed the internet connection. The only way I got it back was to Ruu and start over. I have tried the normal radio resets ect and none of that corrects the problems and since none of the resets of any type seem to effect the NV Items I guess I am just stuck with no Data until an RUU for 3.16 is released. I am used to dealing with moto's and using the last sbf has always worked fine even if going backwards, but this HTC is a little more confusing.
Best to wait for the 3.16 RUU to come around.
Sent from my EVO using xda premium
xbmoyx said:
Best to wait for the 3.16 RUU to come around.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Any word on that? looking to root the EVO LTE and I dont want to do it until I can make sure I can get it back to absolute bone stock in case I have to send it to HTC for warranty. Also is the 3.16 software root-able yet? Did a brief search and couldnt come up with anything. I just want to run stock rom but rooted if that helps.
quattroa430 said:
Any word on that? looking to root the EVO LTE and I dont want to do it until I can make sure I can get it back to absolute bone stock in case I have to send it to HTC for warranty. Also is the 3.16 software root-able yet? Did a brief search and couldnt come up with anything. I just want to run stock rom but rooted if that helps.
Click to expand...
Click to collapse
No and yes http://forum.xda-developers.com/showthread.php?t=2135670
Sent from my EVO using xda premium
xbmoyx said:
No and yes http://forum.xda-developers.com/showthread.php?t=2135670
Sent from my EVO using xda premium
Click to expand...
Click to collapse
DirtyRacun now fully supports 3.16 and will give you full S-OFF, you will have to RUU back to 3.15 in the process though.
dirtrider1 said:
DirtyRacun now fully supports 3.16 and will give you full S-OFF, you will have to RUU back to 3.15 in the process though.
Click to expand...
Click to collapse
I tried to RUU back to 3.15 so I can dirtyracun. It wouldn't work because I'm already 3.16. So I have to wait for 3.16 RUU to run dirtyracun?
DirtyRacun S-Off for 3.16, step 7 says to download the RUU for the current HBOOT and place in the folder,
but RUU for 3.16 isn't out yet (even though the HBOOT is still 2.09). If I am on 3.16 version of the software, can I use the other versions?
---------- Post added at 04:20 PM ---------- Previous post was at 04:18 PM ----------
Zekerbox said:
I tried to RUU back to 3.15 so I can dirtyracun. It wouldn't work because I'm already 3.16. So I have to wait for 3.16 RUU to run dirtyracun?
Click to expand...
Click to collapse
dirtrider1 said:
DirtyRacun now fully supports 3.16 and will give you full S-OFF, you will have to RUU back to 3.15 in the process though.
Click to expand...
Click to collapse
Are you referring to using the 3.15 RUU for step 7? Even if the current RUU is 3.16?
JManekia said:
DirtyRacun S-Off for 3.16, step 7 says to download the RUU for the current HBOOT and place in the folder,
but RUU for 3.16 isn't out yet (even though the HBOOT is still 2.09). If I am on 3.16 version of the software, can I use the other versions?
---------- Post added at 04:20 PM ---------- Previous post was at 04:18 PM ----------
Are you referring to using the 3.15 RUU for step 7? Even if the current RUU is 3.16?
Click to expand...
Click to collapse
Yes. I don't have the 3.16 RUU but I unlocked and installed meanbean s-on. to use DirtyRacun I need to be stock locked 3.15. But I can't install the 3.15 RUU from dirtyracun site. It errors out and I'm stuck unless I can get a 3.16 RUU. Unless there is a way to revert to 3.15 with S-ON, I tired several different ways but since I did the stock 3.16 update I can't seem to get any RUU to install. I hope that made sense.
Zekerbox said:
Yes. I don't have the 3.16 RUU but I unlocked and installed meanbean s-on. to use DirtyRacun I need to be stock locked 3.15. But I can't install the 3.15 RUU from dirtyracun site. It errors out and I'm stuck unless I can get a 3.16 RUU. Unless there is a way to revert to 3.15 with S-ON, I tired several different ways but since I did the stock 3.16 update I can't seem to get any RUU to install. I hope that made sense.
Click to expand...
Click to collapse
DirtyRacun supports 3.16 now
Sent from my PoS MoPho
Got it working thanks to dirtyracun! Woot.
S-off 3.16 with new firmware!
Thanks everyone who responded
:thumbup:
Sent from my EVO using Tapatalk 2
Did you have to downgrade to 3.15 software version since 3.16 RUU isn't available? And after downgrading, which TWRP version did you use for recovery?
learn from my hours of trial and error lol
JManekia said:
Did you have to downgrade to 3.15 software version since 3.16 RUU isn't available? And after downgrading, which TWRP version did you use for recovery?
Click to expand...
Click to collapse
I will give you the process that worked for me and spare you all of the trial and error
what problem I had was I s-on unlocked and installed 3.15 RUU and updated to 3.16 with the OTA. This left me in a pickle because s-on wouldn't allow me to revert to 3.15 so dirtyracun would work. Now that they updated dirtyracun it works! THANKS DEVS! you rock
I unlocked/s-on and installed twrp 2.4 (inportant if you want to update firmware)
Then I followed the instructions for installing babyracun on ulimited.io
I am running HBOOT 2.09 so I downloaded the appropriate RUU from unlimted.io (3.15 RUU)
then I relocked and flashed the RUU per unlimited.io instructions.
Then I follow the instructions for running dirtyracun
Basically the babyracun isntructions allow you to flash the 3.15 RUU and install DirtyRacun.
I then was able to flash the newest firmware and reinstall my favorite ROM Meanbean (props to MikeyXDA) and flash firmware with S-OFF
Hope this helps
I appreciate the post and you taking time to write out the process.
I am new to android and have never rooted before and I am looking to root. From everything I've read and researched, S-Off is the way to go. I have the newest version 3.16 and so I am doing my research from everyone's experience. I have read about the TWRP issues and all so I am just looking at the dirtyracun steps and making sure I have all the bases covered.
Thanks again for the writeup.
JManekia said:
I appreciate the post and you taking time to write out the process.
I am new to android and have never rooted before and I am looking to root. From everything I've read and researched, S-Off is the way to go. I have the newest version 3.16 and so I am doing my research from everyone's experience. I have read about the TWRP issues and all so I am just looking at the dirtyracun steps and making sure I have all the bases covered.
Thanks again for the writeup.
Click to expand...
Click to collapse
I've had android for years and never rooted till my evo LTE :silly: I can't believe I waited! S-off is the way to go. TWRP is awesome for flashing roms and playing around with your options. I personally use MeanBean and love it. I overclocked my phone and its snappy :laugh:
Have fun and unleash your droid!
My girlfriend accepted her OTA update to 3.16.651.3, its running Hboot 2.09, Radio 1.12.11.1210, i did an htcdev unlock, with TWRP 2.4.4.0 installed, my question is can i install meanbean 3.09 directly through the TWRP recovery or am i risking a brick?
yes you can install it just follow the instructions in the MeanBean thread for s-on install
gixelz said:
My girlfriend accepted her OTA update to 3.16.651.3, its running Hboot 2.09, Radio 1.12.11.1210, i did an htcdev unlock, with TWRP 2.4.4.0 installed, my question is can i install meanbean 3.09 directly through the TWRP recovery or am i risking a brick?
Click to expand...
Click to collapse
Actually did the exact same thing... installed MeanBean 3.09 with TWRP 2.4.4.0....(with a little help from Cruise350 Big thanks to him)...but followed the s-on instructions and it installed perfectly the first time.
big thanks guys, followed the instructions, and i got her up and running with meanbean, she doesn't utilize all of the features but is pleased none the less, thanks again
I installed the google edition ruu from here: http://forum.xda-developers.com/showthread.php?t=2358781&highlight=receive+ota
Before I flashed the ruu I had S-Off with the updated 1.44 (Jul 5.) HBOOT.
Since I am S-Off, could I flash the RUU from HTC's website (Latest with 1.55) then proceed to install any sense rom (Viperone for example)?
Or do I need to flash the older 1.44 HBOOT RUU? (If so, is there a link to that?)
Lastly was there a TP update that makes touch unresponsive on AOSP roms with the latest RUU?
Thank You,
GalaxyUser50
GalaxyUser50 said:
I installed the google edition ruu from here: http://forum.xda-developers.com/showthread.php?t=2358781&highlight=receive+ota
Before I flashed the ruu I had S-Off with the updated 1.44 (Jul 5.) HBOOT.
Since I am S-Off, could I flash the RUU from HTC's website (Latest with 1.55) then proceed to install any sense rom (Viperone for example)?
Or do I need to flash the older 1.44 HBOOT RUU? (If so, is there a link to that?)
Lastly was there a TP update that makes touch unresponsive on AOSP roms with the latest RUU?
Thank You,
GalaxyUser50
Click to expand...
Click to collapse
All the information you need can be found here
http://www.htc1guru.com