Hi Dear all,
I have a P-7500 rooted, SU installed, which is now in boot-loop. The reason is - I tried to install font installer and 2 new fonts. It asked whether SU grants access or not. I said yes, and then installation continued and came the display for rebooting. And it went to boot-loop. The samsung logo remains with periodic glow. It was upgraded to 4.0.4 before rooting. I didn't do the rooting, as I didn't know much about it. As I didn't have any record of firmware or ROM, not sure about what it was.
1. How to get the information of the environment before it went to boot-loop.
2. Any tutorial or previous posts to descrive the recovery process.
Please help me, :crying: you are welcome to ask anything to understand the issues involved.
Please help, Thank you.
Rafiq
rafiqmia said:
Hi Dear all,
I have a P-7500 rooted, SU installed, which is now in boot-loop. The reason is - I tried to install font installer and 2 new fonts. It asked whether SU grants access or not. I said yes, and then installation continued and came the display for rebooting. And it went to boot-loop. The samsung logo remains with periodic glow. It was upgraded to 4.0.4 before rooting. I didn't do the rooting, as I didn't know much about it. As I didn't have any record of firmware or ROM, not sure about what it was.
1. How to get the information of the environment before it went to boot-loop.
2. Any tutorial or previous posts to descrive the recovery process.
Please help me, :crying: you are welcome to ask anything to understand the issues involved.
Please help, Thank you.
Rafiq
Click to expand...
Click to collapse
a stock rom from samfirmware would fix it, flash it via odin v1.85, you find pinned video guides in the gtab section on how to do this
DefQoN_BE said:
a stock rom from samfirmware would fix it, flash it via odin v1.85, you find pinned video guides in the gtab section on how to do this
Click to expand...
Click to collapse
Thanks DefQoN_BE, it's done. First time though, it went fine. Thanks a lot.
rafiqmia said:
Thanks DefQoN_BE, it's done. First time though, it went fine. Thanks a lot.
Click to expand...
Click to collapse
no problem
Related
Hi All,
Hope you are well. I just flashed the CWM recovery to a locked tab using ODIN, and upon doing POWER + VOL(-) and getting into the recovery, for some reason the screen with all the menu to do wipes/install just seems to be scrolling all over the place.
When I re-flash the stock recovery back using ODIN, the screen is fine again. Tried both 4.0.0.4 and also the 3.2.0.1 versions, with not much luck.
Has anyone had a similar incident? Is there anything I can do? I wanted to try and flash my custom boot.img.
Thanks heaps in advance!!!.
Hi Folks,
Hope you are well - wasn't sure if anyone has come across this - but anyone seen the Recovery mode flickering / scrolling when flashed on a locked Galaxy Tab 10.1?
Thanks again!
I'm using CWM 4.0.0.4 on my locked P7510, works as intended.
http://forum.xda-developers.com/showthread.php?t=1171089
Thanks yqed,
For some reason when I have CWM 4.0.0.4, and when I reboot into the recovery mode - CWM shows up - but the screen keeps on flickering / scrolling / refreshing all over the place.
I'm wondering if there is something different in my Retail Galaxy Tab 10.1 WIFI vs. the others - I bought mine from Korea (retail). Appears that I have kernel version 2.6.36.3 instead of .4 and the build is EH14.
Thanks.
I to get some lag while using the cmw...
Sent from my Galaxy Tab!
+1
I have a Korean 32Gb wifi Galaxy Tab 10.1, and my CWM Recovery also starts having a seizure when I boot into it. It still seems to be working fine, but it is nearly impossible to use.
I would really like to know what causes this issue.
Thanks limenless,
Anyone seen this before? Anyone know if CWM 5 might potentially fix this - seens some thread with regards to this.
I was going to try and wipe the dalvik cache, and others, but seeing the screen is almost impossible to use in recovery mode, having a bit of difficulty there.
Any advice is much appreciated - if you need dumps and others, happy to provide - as long as I get some instructions...
Thanks.
frankus0512 said:
Thanks limenless,
Anyone seen this before? Anyone know if CWM 5 might potentially fix this - seens some thread with regards to this.
I was going to try and wipe the dalvik cache, and others, but seeing the screen is almost impossible to use in recovery mode, having a bit of difficulty there.
Any advice is much appreciated - if you need dumps and others, happy to provide - as long as I get some instructions...
Thanks.
Click to expand...
Click to collapse
Any luck bro? having same problem here..
Please help.. i realy want to root my tab 10.1
castiel19 said:
Any luck bro? having same problem here..
Please help.. i realy want to root my tab 10.1
Click to expand...
Click to collapse
Are you using the cwm5?
I'M just curious if so and you still get issues.
Sorry I can't really help.
If you can read this it was sent using my GT-P7510.
HOPING solution
frankus0512 said:
Hi All,
Hope you are well. I just flashed the CWM recovery to a locked tab using ODIN, and upon doing POWER + VOL(-) and getting into the recovery, for some reason the screen with all the menu to do wipes/install just seems to be scrolling all over the place.
When I re-flash the stock recovery back using ODIN, the screen is fine again. Tried both 4.0.0.4 and also the 3.2.0.1 versions, with not much luck.
Has anyone had a similar incident? Is there anything I can do? I wanted to try and flash my custom boot.img.
Thanks heaps in advance!!!.
Click to expand...
Click to collapse
Did you try CMW 5? Preshoot has a tutorial in the development section, its pretty simple just follow it and I think and hope that your issue would be solved!
Why dont you try taking a picture/screenshot of it, best would be using ddms.bat in the android development kit to take screenshot's , or just a picture would do great. Hard to guess what's going on, when someone mentioned seizure, I pictured Dr.House
Misledz said:
Why dont you try taking a picture/screenshot of it, best would be using ddms.bat in the android development kit to take screenshot's , or just a picture would do great. Hard to guess what's going on, when someone mentioned seizure, I pictured Dr.House
Click to expand...
Click to collapse
Thank you for showing interest to help me.. btw am also big fan of house
Let me explain my situation from the start..
i tried to flash recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 following the instruction from the tutorial.. but after i boot into recovery the screen flash.. I will attach you tube video later..
took whole night to fix it with no success, finally decided to re-flash stock rom from firmware P7510ZSKK1_P7510ZZHKK1_TGY.. boot into stock recovery and worked fine..
as i don't want to give up and want my tab 10.1 to be rooted tried again to flash CWM5027 from preshoot.. but same screen flicker happened..
Please help me fix the problem.. or do you know other way to root my tab??
---------- Post added at 12:49 PM ---------- Previous post was at 12:40 PM ----------
castiel19 said:
Thank you for showing interest to help me.. btw am also big fan of house
Let me explain my situation from the start..
i tried to flash recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 following the instruction from the tutorial.. but after i boot into recovery the screen flash.. I will attach you tube video later..
took whole night to fix it with no success, finally decided to re-flash stock rom from firmware P7510ZSKK1_P7510ZZHKK1_TGY.. boot into stock recovery and worked fine..
as i don't want to give up and want my tab 10.1 to be rooted tried again to flash CWM5027 from preshoot.. but same screen flicker happened..
Please help me fix the problem.. or do you know other way to root my tab??
Click to expand...
Click to collapse
how can i copy link of youtube here?? i want to show my screen flicker
Just link it here,
HTML:
[media=youtube] bracket [/media]
Where "bracket" is the ID of your video, those letters at the end. EG: FL7yD-0pqZg
Have you tried Overcome's CWM? I'm using that and it's perfectly fine. PS it's the ver 5 release.
PS; For being an epic House fan I shall see to it that you get it worked out
And to top that off, an offlink to the CWM of Overcome http://www.mediafire.com/?6c5tdmds927npdv
PS: Here's your video, Embedded anyways.
I'm on the same page. My screen flicker after entering CWM recovery mode. Very annoying.
In the development section for 10.1 I was just reading in a thread about a Korean ROM, Pershoot stated something about someones device not being compatible with his kernel. I don't know if either one has to do with the other but I think I read in the same thread of someone having "this problem"
Honestly don't know if anything between this thread and that thread are relevant to each other.
Just thought I'd mention it to see if it helps. sorry if it doesn't apply to anything here.
I somehow fixed it by flashing the tab with an non-HK 3.1 stock ROM using Odlin. then then cwm recovery works fine.
Not really a fix but
You could always just find a pre rooted rom to flash with odin, then once u have the pre rooted rom installed get rom manager and u will no longer have to worry about cwm. Plus u could then flash to whatever rom u need to using rom manager.
My method allows me to have a clear screen in CWM RECOVERY but after I flashed Galaxy Task 14 I get all blurred screen whenever my Tab is resumed from standby. I must set my screen to never turn off to prevent it flickering again.
May I ask which pre rooted ODLIN ROM do you guys recommend? If possible can you please provide the URL to it? I suspect the flickering problem has relation to the harmony between bootloader, kernel etc so I want to use the exact combination you guys are using.
Sent from my GT-I9100 using Tapatalk
Still not working
appreciate your help Misledz, 002001-Overcome_CWM_Recovery_v5.1.2.6 got same result.. my screen still flicker..
I think I will give up on CWM too complicated for me
Can you just give me tips on how to root my tab 10.1 without CWM (if that is possible)
sunnymui said:
My method allows me to have a clear screen in CWM RECOVERY but after I flashed Galaxy Task 14 I get all blurred screen whenever my Tab is resumed from standby. I must set my screen to never turn off to prevent it flickering again.
May I ask which pre rooted ODLIN ROM do you guys recommend? If possible can you please provide the URL to it? I suspect the flickering problem has relation to the harmony between bootloader, kernel etc so I want to use the exact combination you guys are using.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
What Stock Rom did you use? a, planning to download stock rom
P7510ZCLA1 ## 2012 February P7510OZHLA1 China Download
From samfirmware and flash... hope I can use CWM and instal ROM
for the past 3 hours I tried to search pre rooted ROM that can be flash using Odin with no avail
Hey everyone,
I have an Xperia U that originally came with GB. I flashed it to ICS a while ago using the official ICS rom that was posted on XDA, and then successfully rooted the device. Earlier today I downloaded an app to change some system fonts. The app asked me to reboot to apply the changes, and since then, my phone has been in a boot loop. It gets to the "XPERIA" screen that the screen flashes and it restarts.
How can I fix my phone? I don't care about the data or anything, I just want to get the phone up and running!
USB Debugging was OFF before this problem happened
Please help me! I'd appreciate it so much. You guys have helped me accomplish a lot with my phone, maybe you guys can help me save it.
EDIT: I've done some searching but I can't seem to find a guide on what to do, similar to the guides I followed for flashing to ICS and then rooting. Please somebody help me!
Sean89 said:
Hey everyone,
I have an Xperia U that originally came with GB. I flashed it to ICS a while ago using the official ICS rom that was posted on XDA, and then successfully rooted the device. Earlier today I downloaded an app to change some system fonts. The app asked me to reboot to apply the changes, and since then, my phone has been in a boot loop. It gets to the "XPERIA" screen that the screen flashes and it restarts.
How can I fix my phone? I don't care about the data or anything, I just want to get the phone up and running!
USB Debugging was OFF before this problem happened
Please help me! I'd appreciate it so much. You guys have helped me accomplish a lot with my phone, maybe you guys can help me save it.
EDIT: I've done some searching but I can't seem to find a guide on what to do, similar to the guides I followed for flashing to ICS and then rooting. Please somebody help me!
Click to expand...
Click to collapse
do you ha e cwm?
Regards,
G
Sean89 said:
Hey everyone,
I have an Xperia U that originally came with GB. I flashed it to ICS a while ago using the official ICS rom that was posted on XDA, and then successfully rooted the device. Earlier today I downloaded an app to change some system fonts. The app asked me to reboot to apply the changes, and since then, my phone has been in a boot loop. It gets to the "XPERIA" screen that the screen flashes and it restarts.
How can I fix my phone? I don't care about the data or anything, I just want to get the phone up and running!
USB Debugging was OFF before this problem happened
Please help me! I'd appreciate it so much. You guys have helped me accomplish a lot with my phone, maybe you guys can help me save it.
EDIT: I've done some searching but I can't seem to find a guide on what to do, similar to the guides I followed for flashing to ICS and then rooting. Please somebody help me!
Click to expand...
Click to collapse
If you don't care of your data, apps or anything, simply reflash it via flashtool
You can also use SUS
Repair using sus
If it doesnt work flash official ics ftf via flashtool
Sent from my ST25i using Tapatalk 2
Hey guys, basically, i'm new-ish to flashing, but i was able to do it following all instructions. Yesterday i installed an s5 theme from this site that caused my phone to have problems such as the wifi not working. I was reading that flashing a custom kernel might help, it didn't.
So i woke up, entered my TWRP custom recovery and stupidly factory wiped everything, now my phone wont get past the 'Samsung galaxy s III' screen, it just stays there. I have no idea what to do, i'm dumb enough not to make a recovery file before i started all this so i've ****ed up there.
If anyone can help me get my phone back i'll be extremely happy, i just want it working again! I have work in a few hours and really hope to fix it before then! Any help is appreciated.
Download a stock rom from sammobile.com and flash it the way you flashed TWRP.
adamldn said:
Hey guys, basically, i'm new-ish to flashing, but i was able to do it following all instructions. Yesterday i installed an s5 theme from this site that caused my phone to have problems such as the wifi not working. I was reading that flashing a custom kernel might help, it didn't.
So i woke up, entered my TWRP custom recovery and stupidly factory wiped everything, now my phone wont get past the 'Samsung galaxy s III' screen, it just stays there. I have no idea what to do, i'm dumb enough not to make a recovery file before i started all this so i've ****ed up there.
If anyone can help me get my phone back i'll be extremely happy, i just want it working again! I have work in a few hours and really hope to fix it before then! Any help is appreciated.
Click to expand...
Click to collapse
It sounds like you might need to flash a ROM before it will boot. Your contacts, texts etc are gone if you wiped /data though.
thefunnyone said:
Download a stock rom from sammobile.com and flash it the way you flashed TWRP.
Click to expand...
Click to collapse
Appreciate the help guys, i thought as much, i just downloaded 'http://forum.xda-developers.com/galaxy-s3/development-i9305/stock-rom-4-4-4-gt-i9305n-i9305nxxufni4-t2886807/page10' as i was typing this and am installing it now. Lets see what happens?
EDIT- IT WORKED! PHONES BACK!!!
adamldn said:
Appreciate the help guys, i thought as much, i just downloaded 'http://forum.xda-developers.com/galaxy-s3/development-i9305/stock-rom-4-4-4-gt-i9305n-i9305nxxufni4-t2886807/page10' as i was typing this and am installing it now. Lets see what happens?
Click to expand...
Click to collapse
Wait stop, what kind of s3 do you have?
ArkThompson said:
Wait stop, what kind of s3 do you have?
Click to expand...
Click to collapse
GT-I9305, LTE version.
adamldn said:
GT-I9305, LTE version.
Click to expand...
Click to collapse
Ah ok, it's good that it worked. I was just worried since you posted this on the i9300 forum and said you were flashing an i9305 ROM.
Hi, I am Asbaat and this is my first post in this forum. Actually I've heard a lot about this forum and also whenever I had any question about a mobile or a tablet, this site was the best. Ok, the story starts 2 years back when galaxy s3 was just launched and I got my garnet Red phone from France. It was awesome and like everybody knows, after some time, galaxy laggs, stucks, bla bla bla. Same happened with me. I heard that rooting it and installing some files helps speed it up just like jailbreaking an iOS device. I searched some sites and got Odin and a custom recovery (something like that) I followed the instructions carefully and the rooting process started. But the rooting didn't complete properly and the phone turned off and Odin crashed. Now I have supersu and clockwerk(something like that) installed on my mobile but root checker says that the phone is not rooted. They do not uninstall and super su when opened says that binary not installed. when I click ok, the app closes. I am completely helpless and I seek your help so can any technician help me about it. I want to either root it completely or either unroot it completely, Im stuck in the middle. Thanks, I just made my account on this forum so I don't know whether I posted it in the right section. This seemed fine to me. Thanks a lot!
Regards,
Asbaat
Asbaat1 said:
Hi, I am Asbaat and this is my first post in this forum. Actually I've heard a lot about this forum and also whenever I had any question about a mobile or a tablet, this site was the best. Ok, the story starts 2 years back when galaxy s3 was just launched and I got my garnet Red phone from France. It was awesome and like everybody knows, after some time, galaxy laggs, stucks, bla bla bla. Same happened with me. I heard that rooting it and installing some files helps speed it up just like jailbreaking an iOS device. I searched some sites and got Odin and a custom recovery (something like that) I followed the instructions carefully and the rooting process started. But the rooting didn't complete properly and the phone turned off and Odin crashed. Now I have supersu and clockwerk(something like that) installed on my mobile but root checker says that the phone is not rooted. They do not uninstall and super su when opened says that binary not installed. when I click ok, the app closes. I am completely helpless and I seek your help so can any technician help me about it. I want to either root it completely or either unroot it completely, Im stuck in the middle. Thanks, I just made my account on this forum so I don't know whether I posted it in the right section. This seemed fine to me. Thanks a lot!
Regards,
Asbaat
Click to expand...
Click to collapse
Flash the zip in recovery from here
http://download.chainfire.eu/636/SuperSU/UPDATE-SuperSU-v2.37.zip
Thanks but
Bro, I'm a complete noob at this, I know how to get it to recovery but i dont know how to do what you are wanting me to do. Give instructions please. Thanks!
Asbaat1 said:
Bro, I'm a complete noob at this, I know how to get it to recovery but i dont know how to do what you are wanting me to do. Give instructions please. Thanks!
Click to expand...
Click to collapse
Boot to recovery, go to install zip, navigate to where you downloaded to it. usually sdcard/download and choose it to install. go back to main menu and choose reboot to finish then try reloading super su.
Darke5tShad0w said:
Boot to recovery, go to install zip, navigate to where you downloaded to it. usually sdcard/download and choose it to install. go back to main menu and choose reboot to finish then try reloading super su.
Click to expand...
Click to collapse
Thanks I'll try
Omg thank you so much!
HEY BRO! THANK YOU SO MUCH. I OWE YOU A LOT!!!! MMMMUUUUAAAHHHHH!!!! :highfive::highfive::highfive: ok here's what I did as if other people have this problem, they might be able to solve it.
I flashed that super su update thingy you said. It made the supersu problem fine. It downloaded an update, then I uninstalled it and finished the root completely, (This made my device unrooted). Then I again rooted it by a website, used Odin and WOALA! IT WORKED! THANK YOU SO MUCH!!! MAN!!!!!!!
Hey guys! I am newbie of this forum just got heard from my friends to share u guys about my problem. Let me tell everything detailed. Last night i have installed Andvance tool pro from a site it required root access. Well my phone is rooted so i gave root access i tried to do some tweaks. First the app reuired a restore i did at the last i restored it but it doesnt happen anything. I was just getting Phone has stopped pop up so i restarted my phone. After i got to see the home has gone nothing is working all my system apps had deleted and only a few left. I can go to recovery option. Now tell me how do i get my system apps to install from recovery and whats the way to install. My phone is INew CXQ U1 version 2.0.0 Mt5672 os 4.4.2. I didnt keep backup so i am badly need of ur help guys. Please i am so much worried about this. I am using it as a useless phone now. Keyboard has gone launcher has gone. Huhu
Alaminkhan said:
Hey guys! I am newbie of this forum just got heard from my friends to share u guys about my problem. Let me tell everything detailed. Last night i have installed Andvance tool pro from a site it required root access. Well my phone is rooted so i gave root access i tried to do some tweaks. First the app reuired a restore i did at the last i restored it but it doesnt happen anything. I was just getting Phone has stopped pop up so i restarted my phone. After i got to see the home has gone nothing is working all my system apps had deleted and only a few left. I can go to recovery option. Now tell me how do i get my system apps to install from recovery and whats the way to install. My phone is INew CXQ U1 version 2.0.0 Mt5672 os 4.4.2. I didnt keep backup so i am badly need of ur help guys. Please i am so much worried about this. I am using it as a useless phone now. Keyboard has gone launcher has gone. Huhu
Click to expand...
Click to collapse
Seems like you need to install a new rom on your phone. Do you have a custom recovery? If yes, what recovery do you have?
I can give you a new rom and instructions on how to install it, but you will need CWM or TWRP for that.
Cheers,
Kuba P.
KiwiTheOne said:
Seems like you need to install a new rom on your phone. Do you have a custom recovery? If yes, what recovery do you have?
I can give you a new rom and instructions on how to install it, but you will need CWM or TWRP for that.
Cheers,
Kuba P.
Click to expand...
Click to collapse
Unfortunately, I didnt install any custom recovery into my phone. ?? Is there any way left to fix?
Alaminkhan said:
Unfortunately, I didnt install any custom recovery into my phone. ?? Is there any way left to fix?
Click to expand...
Click to collapse
If you don't have any custom recovery then you want to flash stock rom of your android.
Ashwinrg said:
If you don't have any custom recovery then you want to flash stock rom of your android.
Click to expand...
Click to collapse
No matter bro I will flash with stock rom. Please tell me process and files to use. I never ever flashed before so this will be the first time for me. I will go with your process step by step. I have pc also but it will be better by my phone only.
Alaminkhan said:
No matter bro I will flash with stock rom. Please tell me process and files to use. I never ever flashed before so this will be the first time for me. I will go with your process step by step. I have pc also but it will be better by my phone only.
Click to expand...
Click to collapse
You need to do some research before you make things worse. You will have to have a pc. Then it is a simple matter of flashing the device which will wipe it completely.
Alaminkhan said:
No matter bro I will flash with stock rom. Please tell me process and files to use. I never ever flashed before so this will be the first time for me. I will go with your process step by step. I have pc also but it will be better by my phone only.
Click to expand...
Click to collapse
Watch these YouTube video. You get flashing procedure in SP flash tool and download link of stock rom in video description.
You need SP flash tool to flash your android.
Download from here
Sorry for saying this , but you should be aware that Rooting a device has its own ups and down/
You should have researched more and must have had a custom recovery incase things go awry.
Now that things have gone bad , the only option you have is flash a rom for your device using SP Flash Tool.
Google for your phone model and download firmware and flash the rom
If you have any trouble finding a rom or flashing it , please feel to contact me.
-Edit:
https://drive.google.com/file/d/0B7IRNMn_vYgSLVVEdE5UQm5HTms/view?usp=drivesdk
Download the above file , extract it and follow https://www.youtube.com/watch?v=Y3bxYYX9Xk8
Make sure you have driver for your device installed properly.
Guys Thanks a lot. I have successfully flashed my phone with SP tools. It has been a great experience for me as I did it for the first time even I was really excited. I really knew it that u guys help will really work. Thanks once again and love u all. Now I wont dare to flash my phone with custom rom well I will install CMW first haha
lesson learned.