This morning I woke up and as I entered the XDA routine to look for a new ROM for my WT19a based firmware .58. I found this HYBROM v17
changed the kernel that is using the kernel itself kamarush very good I recommend to everyone and it is not stable and already spent battery is an ICS alpha. I decided to switch to GB because I was thinking of games as the OS is lighter so I can have more Hz observed for the Games. Ai gave me a Kernel not know where I'm just in Boot img. Do not know which kernel is said that he worked in the cell that is based on .62 firmware. I did everything right as in Tutorial #http://forum.xda-developers.com/showthread.php?t=1373435But I was stuck in the screen just did several times and always restarts the machine. Thank God and Backup ClockworkMod restaruar achieve my original kernel. Soon after the Advanced Backup to start the phone again. At first did not recognize most USB cable into fastboot mode or mode mass is nothing in debug mode only after a disconnected and connected the USB device works again. I wonder if applying a Kernel difirente ROM for your application. Aver can brick. Because I could not install: Confuso:
in boof rom the firmware using is .62 not 58.. the kernel using this to work is xkernel, rage and boofkernel ..
RAGE Kernel v2.8
delmarz said:
in boof rom the firmware using is .62 not 58.. the kernel using this to work is xkernel, rage and boofkernel ..
Click to expand...
Click to collapse
According to the RAGE was vendor Kernel v2.8. Because this Rage Kernel v2.8 would not have to run? Rage Kernel v2.8 ROM does not run on 58? Because before when I was using kernel kamarush MiniSanduwich and everything worked perfect. Someone tell me a kernel itself wrong in a ROM which defects that generates them.
Now I'm too afraid to apply a different kernel and not return it to flow. Because right after that my Kernel celularar stopped recognizing the USB device for a time that is normal.
Rage Kernel, X Kernel and kernels created by bbooff should work on all stock(including .42, .58, .62, .69 and many others) and stock-based ROMs.
GB kernels work only on GB, ICS kernels work only on ICS.
Kernel flasher
Someguyfromhell said:
Rage Kernel, X Kernel and kernels created by bbooff should work on all stock(including .42, .58, .62, .69 and many others) and stock-based ROMs.
GB kernels work only on GB, ICS kernels work only on ICS.
Click to expand...
Click to collapse
Kernel only works on GB and GB Kernel ICS ICS only works on this I know. That's why I had to Madar Kernel to use this ROM Hybrom which is based on GB. It was then that the problem had a second boy from the Facebook group I started | Kernel Rage is that it currently uses in cell http://forum.xda-developers.com/showthread.php?t=1398910 it all works perfect ROM and Kernel. In my not work as I did everything right in the tutorial and the Kernel flasher I used the flash code script to write the kernel. After I did the tutorial teaches you how. Get stuck in boot screen did all limpesas as taught and nothing. When I went to reflasher the kernel you were using ICS Kernel Before the computer stopped recognizing the phone Fastboot mode. By great luck my backup of the original ROM ClockworkMod was recovered successfully. Now I'm afraid to apply in Kernel flasher and it does not return to work.
I need to know what damage they can imreparaveis to come when a kernel applied to a ROM in a dispositovo that is not supported as in my case.
I'm a complete noob when it comes to tinker my x10. I recently installed DonutHD2.2 on it, it has baseband 2.1.71 and Kernel 2.6.29-000530g5f01537 [email protected] #1....
I've heard alot about doom kernel and the others, however I want to know what's the basic purpose of a custom kernel and which one is the best for my rom. Stable wifi connection is my highest priority xD.
Please help a newbie .
tak_juju said:
I'm a complete noob when it comes to tinker my x10. I recently installed DonutHD2.2 on it, it has baseband 2.1.71 and Kernel 2.6.29-000530g5f01537 [email protected] #1....
I've heard alot about doom kernel and the others, however I want to know what's the basic purpose of a custom kernel and which one is the best for my rom. Stable wifi connection is my highest priority xD.
Please help a newbie .
Click to expand...
Click to collapse
Hi,
kernel is the main system core of every LINUX or UNIX system, even on Android (its something like non.consistent linux...) which controlls the whole hardware available on system - e.g. display,processor, memory, wifi and bt and so on.
As you wrote, your system has stock kernel - standart delivered from SE.
You can use any kernels from XDA for X10i, there are not so much differences between them. The main thing is the CPU governors. Stock kernel doesnt have good CPU governor (called "ondemand"), so it drains battery all the time. Thats the one thing related to kernel. There are also some optimalizations and so on like undervolting, possibility to load external harware support drivers an a lot of other stuff.
But for begginner, you would probably appreciate only the CPU governors, because of battery life.
HeliumX10 said:
Hi,
kernel is the main system core of every LINUX or UNIX system, even on Android (its something like non.consistent linux...) which controlls the whole hardware available on system - e.g. display,processor, memory, wifi and bt and so on.
As you wrote, your system has stock kernel - standart delivered from SE.
You can use any kernels from XDA for X10i, there are not so much differences between them. The main thing is the CPU governors. Stock kernel doesnt have good CPU governor (called "ondemand"), so it drains battery all the time. Thats the one thing related to kernel. There are also some optimalizations and so on like undervolting, possibility to load external harware support drivers an a lot of other stuff.
But for begginner, you would probably appreciate only the CPU governors, because of battery life.
Click to expand...
Click to collapse
I hear doom kernel is good, but it has wifi problems, especially with the latest version. Which kernel would you recommend?
Try doomkernel or zKernel, but u must know that some kernels are for locked and some for unlocked bootloader. U have doom for both.
Sent from my xperia "z10i"
tak_juju said:
I hear doom kernel is good, but it has wifi problems, especially with the latest version. Which kernel would you recommend?
Click to expand...
Click to collapse
Yes, I am also running DoomKernel
I am using 2.6.29-modFXP-DooMKernel-v04b; could recommend it. And wifi works great (using it often, dont want 3G data plan).
As was told - depends if you are on locked or unlocked bootloader; but locked doesnt matter I have it also for to be completely save
HeliumX10 said:
Yes, I am also running DoomKernel
I am using 2.6.29-modFXP-DooMKernel-v04b; could recommend it. And wifi works great (using it often, dont want 3G data plan).
As was told - depends if you are on locked or unlocked bootloader; but locked doesnt matter I have it also for to be completely save
Click to expand...
Click to collapse
I don't know if I have locked or unlocked bootloader. ^.^
How do I check?
Also if I install any of these custom kernels, would I be able to restore the original SE kernel if needed?
U can check it with s1tool, find it on this thread (step for unlocking bootloader). And yes, u can return ur stock kernel, with flashtool. All info u can find on this thread:
http://forum.xda-developers.com/showthread.php?t=928343
Sent from my xperia "z10i"
tak_juju said:
I don't know if I have locked or unlocked bootloader. ^.^
How do I check?
Also if I install any of these custom kernels, would I be able to restore the original SE kernel if needed?
Click to expand...
Click to collapse
If you havent done bootloader unlock, you have locked bootloader Or test as described above
And yes, if you will install any custom kernel you are still able to load original kernel from SE. In case you will delete locked bootloader image; the stock kernel will load instead. This is on locked bootloader, dont know if this also on locked kernels.
No, DoomKernel doesn't have WiFi problems...I think you said it because once you have DoomKernel installed on your phone, you must flash and adittional file using Flashtool that is called Wifi Module, and everything will be fine again..
Just referring to this thread:
http://forum.xda-developers.com/showthread.php?t=1673050
Maybe there are no problems than, guess I'll install it and inform you guys if it works .
How do I backup my stock kernel?
tak_juju said:
Just referring to this thread:
http://forum.xda-developers.com/showthread.php?t=1673050
Maybe there are no problems than, guess I'll install it and inform you guys if it works .
How do I backup my stock kernel?
Click to expand...
Click to collapse
Personally I havent used Feralab ROMs, but on other ones I didnt have any problems.
You dont need to backup stock kernel, it cant be erased (only after bootloader unlock).
If you will find any problems, we or I will surely help you
Yap, on locked BL u can't erase stock kernel, u don't need to backup.
Sent from my "z10i"
Been on thgo's kernels for a very long time now, and it still is the best for me.
Sent from my Xperia X10 using XDA
Flashing Kernel
I am a total newbie and have rooted my x10 and unlocked its bootloader. But now I want to use custom roms but do not know how to flash a custom kernel. Can you guide to a thread which can show step by step guide on flashing custom kernel???
Any help would be greatly appreciated.
I am searching all the threads since last month without any success.
diehardluck said:
I am a total newbie and have rooted my x10 and unlocked its bootloader. But now I want to use custom roms but do not know how to flash a custom kernel. Can you guide to a thread which can show step by step guide on flashing custom kernel???
Any help would be greatly appreciated.
I am searching all the threads since last month without any success.
Click to expand...
Click to collapse
I guess that you can find a complete tutorial on FlashTools topic under the complete FlashTool guide.
Long story short:
1 Install Flashtool and put desired kernel file inside the firmware folder (which is located inside flashtool folder)
2 Connect phone with unknown sources and USB debugging checked on and check if its recognized
3 Click the flash button (the one with the little thunder), select the kernel file
4 Follow FlashTools instructions (it will show up after you select the files and hit ok)
5 ??????
6 Profit
Driver
wha is mali drivers
a2296455 said:
No, DoomKernel doesn't have WiFi problems...I think you said it because once you have DoomKernel installed on your phone, you must flash and adittional file using Flashtool that is called Wifi Module, and everything will be fine again..
Click to expand...
Click to collapse
That additional file called WIFI module or WIFI fix must be flashed via Xrecovery, because it's a zip file. With Flashtool you flash just FTF files (FlashTool File).
Doomkernel (V06) are good, Ferakernel also, ThJap th n5-1... This are kernels for Stock based Roms.
For non-Stock based Roms, like CM 7.2 AND CM9.1 based Roms, you must use kernels which are based on that Roms (FXP kernel, Amin kernel...)
That rom that you were flashed (Donut 2.2.9) is one of the best Stock based Rom. You can use Doomkernel v.06 with medium OC (Overclock) 1113 Mhz. First download Doomkernel on PC, and put that file in Flashtool/firmware folder. Than download WIFI module for that kernel and put on SD card of your phone(every kernel have specific wifi module). Flash kernel via Flashtool, when finished, reboot into Xrecovery ( when you power up your phone and blue led lights up, keep pressing Back button on your phone). Choose Install custom zip, than find your downloaded Wifi module and choose to install. After that, choose Reboot option in Xrecovery and enjoy...
Sent from my SO-01C using xda premium
i rooted my phone sk17i using the test point method.....worked wellll
flashed the krsh kernel v3.... worked well flashed real ics also worked welll
rebooted to cwm... and installed new wifi modules provided in thread of krsh kernel.... flashed it.... done....
now the problem is that my wifi turns on but it is not connecting to any network.... i removed my password on the wifi but it is still not connecting....
PLZ HELP....
p.s have flashed my x10i a million times so a little less NOOB
rohit25 said:
i rooted my phone sk17i using the test point method.....worked wellll
flashed the krsh kernel v3.... worked well flashed real ics also worked welll
rebooted to cwm... and installed new wifi modules provided in thread of krsh kernel.... flashed it.... done....
now the problem is that my wifi turns on but it is not connecting to any network.... i removed my password on the wifi but it is still not connecting....
PLZ HELP....
p.s have flashed my x10i a million times so a little less NOOB
Click to expand...
Click to collapse
flash any other kernel
usman_fareed said:
flash any other kernel
Click to expand...
Click to collapse
would mesa v1.5 work..... also would i have to flash the wifi modules for it.... it states otherwise but in many posts i have read that i have to
rohit25 said:
would mesa v1.5 work..... also would i have to flash the wifi modules for it.... it states otherwise but in many posts i have read that i have to
Click to expand...
Click to collapse
Mesa v1.5 kernel will works just fine...no need to flash wifi modules anymore...just remember to delete wlanfixed in system folder and reboot your phone TWICE to make wifi works....
Pusak Gaoq said:
Mesa v1.5 kernel will works just fine...no need to flash wifi modules anymore...just remember to delete wlanfixed in system folder and reboot your phone TWICE to make wifi works....
Click to expand...
Click to collapse
just one more question..... if i flash rage kernel do i have to flash the ics_wifi_modules.zip files first as said in the thread or after flashing the kernel
rohit25 said:
just one more question..... if i flash rage kernel do i have to flash the ics_wifi_modules.zip files first as said in the thread or after flashing the kernel
Click to expand...
Click to collapse
To make thing much easy for you to switch different kernel i suggest you flash Stock wifi modules first before you try other kernel...this can test you phone whether wifi works on stock modules or you have to flash wifi modules to make it works....
Sent From My iPusak Gaoq™
Install
rohit25 said:
i rooted my phone sk17i using the test point method.....worked wellll
flashed the krsh kernel v3.... worked well flashed real ics also worked welll
rebooted to cwm... and installed new wifi modules provided in thread of krsh kernel.... flashed it.... done....
now the problem is that my wifi turns on but it is not connecting to any network.... i removed my password on the wifi but it is still not connecting....
PLZ HELP....
p.s have flashed my x10i a million times so a little less NOOB
Click to expand...
Click to collapse
Currently, many kernel are many errors with the wifi but only to install the Wifi modules will serve you to perfection, or use the kernel as you recomiento table. I currently use the ICS Kernel KRsH Wifi modules and serves me perfectly.:good:
problem solved i would request the moderator to close this thread.... i had actually installed mac filter on my router so wasnt able to access as my phone wasnt added there is no problem with the wifi modules
I have just aquired a xperia x10, rooted and bootloader unlocked. But since I got it (generic rom 2.3.3) wifi doesnt seem to work. It just gives me an error. I tried different roms and kernels with no success. Tried to search for similar problems and mostly its advised to install a different kernell wich I already did.
I´ve heard that I could install diferent wifi modules, but I couldnt find where they are. So I really apreciate if anyone could help me out.
Right now Im using "Achotjan_X10i_6.0.B.0.743_Light-V1" ROM with default kernel version. Base Band 2.1.71.
Regards
Ok sounds like you have no wifi modules installed, here is doomlords v6 kernel http://forum.xda-developers.com/showthread.php?p=17370225 here you will find 3 different versions - stock kernel/medium ocerclocked/full overclock - I recommend flashing the medium ocerclocked version of the kernel also all the wifi modules are there aswell for these kernels just scroll down and find the download links all 3 have seperate links and all have there respected modules for wifi hope this helps hit thanks if it does
Sent from my Flying MM X10 using xda premium
dunc4n88 said:
Ok sounds like you have no wifi modules installed, here is doomlords v6 kernel http://forum.xda-developers.com/showthread.php?p=17370225 here you will find 3 different versions - stock kernel/medium ocerclocked/full overclock - I recommend flashing the medium ocerclocked version of the kernel also all the wifi modules are there aswell for these kernels just scroll down and find the download links all 3 have seperate links and all have there respected modules for wifi hope this helps hit thanks if it does
Sent from my Flying MM X10 using xda premium
Click to expand...
Click to collapse
I will try that thanks. By the way, I need to instal wifi modules via flashtool or just put the zip file ont he SD and install via xrecovery?
Regards
Edit1: I flashed the doomlords v6 kernel plus wifi modules for that kernel version and wifi still doesn´t work... Dunno what to do... :s
Can anybody help me please. I tried multiple times installing wifi modules with no success.
[email protected]@n said:
Can anybody help me please. I tried multiple times installing wifi modules with no success.
Click to expand...
Click to collapse
wifi modules are zip files and need to be installed via cwm not flashtool. which kernel do you have? there are 3 versions of doomKernels, please flash correct one.
mrd7rs said:
wifi modules are zip files and need to be installed via cwm not flashtool. which kernel do you have? there are 3 versions of doomKernels, please flash correct one.
Click to expand...
Click to collapse
Yes. I flashed via recovery menu. With xrecovery and cwm, neither worked. And I am sure that installed the correct version. Now im back to generic rom with original wifi modules, so I cant figure it out why the wifi modules dont work...
Help)
I have same problem, but wifi do not work even on stock 2.3.3 rom. wifi turning on and see connections but don't connect
http://forum.xda-developers.com/showpost.php?p=29323343&postcount=5
check signature, he is using your rom problably. maybe quickfixes "kernel+wfi" mention in signature worked.
I recently tried to install a new kernel, but it didn't work. The problem was that I had already installed the kernel modules for the new kernel but had flash the stock one. So now the Wifi did work but I had no connection to the cellular network nor could I send text messages or phone anybody.
My solution was just to get the stock modules and paste them into /system/lib/modules and delete the old ones. And well it did work but now my wifi doesn't work. All it says, after about an hour trying to switch on wifi, is: Error
I'm running the stock rom (jb, sense 4+) and the kernel (1.17.401.1)
These are my current modules:
https://www.dropbox.com/sh/73wpj9d7uy3fqvt/eKgvhcKmeF
Download Nik3r's stock kernel with embedded modules, elite kernel, or hx0re. All great with multiple purposes.
Hope to have helped.
Sent from my HTC One X+ using xda premium
try this kernel but make sure you hv unlocked bootloader and rooted... http://forum.xda-developers.com/showthread.php?t=2012320
rshahzad17 said:
try this kernel but make sure you hv unlocked bootloader and rooted... http://forum.xda-developers.com/showthread.php?t=2012320
Click to expand...
Click to collapse
Thanks
It worked
acreatorius said:
Thanks
It worked
Click to expand...
Click to collapse
welcome