Hi, sorry for my bad English.It was transalte with the Google Translater.
My problem is that since I installed ViperX + 1.0.3 my Sim card is perhaps as 3 -4 times a day no longer recognized.
3 - 4 Times a day i must type my Pin an the for 2-4 hours it runs perfect.
Previously I had installed InsertCoin and had no problems.
Maybe someone has an idea what it could be?
Can i flash the boot.img from the InsertCoin rls for the ViperX+ ROM ?
Greetings
Basti
Try re-flashing the rom it sounds like a bad flash. I have been using the rom since day 1 and have had no issues with sim card at all. Also you could try another rom for a day and see how you get on. Another solution is to try re-flashing the kernel and see if that helps.
AW: ViperX+ 1.03 INT - No Sim Card found...
i have flash the elite 2 kernel again but the same problem.
anyone have the problem or any tips?
Sent from my HTC One X+ using xda app-developers app
I've already read about this issue in a german board; this can also be a hardware issue, because the users there report they got this problem also on other ROMs and reflashing ROM or kernel didn't change anything for them.
So you should try to flash a different ROM and look if you still have this problem. If yes, I suggest you to take your phone back and get a new one or send your phone to an authorised repair centre, because then this must be a hardware issue.
BTW: tripl3b are you german? your english sounds like this sorry
so maybe check out the thread @ the german board: http://www.android-hilfe.de/htc-one...karte-wird-ploetzlich-nicht-mehr-erkannt.html
but I don't know if they got a solution for your problem there...
Agreed, the best thing to do is to re-lock your bootloader. Then flash your stock rom. If you are still having problems at that stage it is more than likely hardware which they should fix for you under warranty even if you have unlocked your bootloader.
If you have a different sim card try that as well. It could be the contacts on your sim card are damaged etc.
@dubdroid_ yes iam german
i have check the thread from the german board, but they have no solution at the moment
Before i installed the ViperX+ Rom, i have installed the InsertCoin Rom and they run without any Problems.
U think i can use the boot.img from the InsertCoin ROM or ist this a Problem for the Viper rom ?
You should be able to as far as I know they are based on the same rom version.
ok, i try it.
thx for ur help
no success
when i flash the boot.img from the InsertCoin rom, i have no WLAN or Provider Signal
ok, now i have flash the stock kernel an it runs since 3 days without any problems.
anyone knows why i cant use the elite or elite 2 kernel ?
I might throw my own two cents into this thread. My wife and I both have this same phone and we experience this no-sim card problem ALL THE TIME.
Specs:
Phone1: ATT HTC OneX+
Elegancia ROM
Stock kernal
Rooted (obviously)
Phone2: ATT HTC ONeX+
Stock everything, factory new
I find that this might be an ATT problem and not an HTC problem. Here is my evidence.
I have noticed this problem only happens when I am in my home town area (Salt Lake, UT) where ATT is rolling out their LTE network. I live in an area that is mostly 4G, on occasion I get a very very weak LTE signal. I think the network is dropping these phones when the phone switches between 4G and LTE. If I go to an area of solid LTE coverage this problem does not happen at all. I am out of town in San Francisco each week and this problem never happens in that area, only in SLC. The quick fix is to cycle airplane mode and the phone comes back to life.
Any thoughts anybody?
Related
i successfully flashed the rom yesterday... first time with the gingerbread... was just using froyo, but i can't find a radio that will give me a network signal, all i could get was wifi? Need help
now i've downloaded a bunch of different radios... and when i add them to my root on the scard, and try to flash in bootloader.... or in cwr, it aborts and doesn't work. So i can't even see if any of these work. Thoughts please?
I ru no this pa really a question to be posted on the android development forum, not in the general area.
But as opposed to your question why not just give the new one a try. The 605.9 radio that came out mid December?
Sent from my HTC ThunderBolt using XDA App
well... somewhat embarassing... but i figured out what was wrong. I just bought a macbook pro, which automatically de-compresses files when downloaded (radios,roms etc) so to even try to put them on the phone, i had to compress again, before. Didn't work. I just tried downloading the 605.9 radio from my pc when i got home....and it flashed no problem. THE GB ROM LIVES!!! Thx for the response though.. there's a great amount of knowledge here... i'm a rookie but am taking in quite a bit from the pro's! Thx
i can't find a radio that will give me a network signal, all i could brush into 2.11.605.9 + PG05IMG.zip did not change Need help
I have a Samsung Nexus S (Not the 4g version) I just picked up and the radio seems to not be functioning. No matter which sim card I insert into this thing the radio still comes up with zero bars I've switched the roms around a few times and I'm currently downgrading to the PeterAlfonso's Bugless Beast with the custom kernel in hopes that maybe flashing these two things may have a positive effect on my issue but does anyone have any suggestions I cant seem to find this issue on google/the forums.
I've discovered that I need to try flashing a new radio so I've started a new thread including a request for new links to new radio's
The new forum post is:
http://forum.xda-developers.com/showthread.php?p=26445907#post26445907
and the radio links that are dead that work for the gt-i9020a are:
http://forum.xda-developers.com/showpost.php?p=12727000&postcount=82
Hi.
This morning I realized that I had no data connection in my SGS2. No E, no 3G, no H, no H+. Unable to connect to the internet. WiFi works seamlessly.
I was using SlimKat (http://forum.xda-developers.com/galaxy-s2/orig-development/rom-slimkat-i9100-t2552988) and no significant changes were made yesterday.
Inmediately I thought that I had no data available in my prepaid card. I checked with my provider (Lycamobile NL) and there were connections till 20:00 aprox, when I got home and hooked to the wifi. Nothing in the mornig. Data available in my account. I have tried the SIM in a different phone and works perfectly. I can make and receive phone calls, as send and receive SMS messages.
Thinking that it could be a problem with the rom I've installed PacMan (same result) and currently have installed last NeatROM. Same result.
I've also traveled to France, where I'm now: with a Lebara FR SIM that I've just toped-up I get the same annoying result: no data.
Data connections are enabled under Settings --> More... --> Mobile network settings, as it's also enabled the National data roaming. APNs are correctly configured and selected.
No software was installed neither settings changed neither in PacMan nor NeatROM.
A mistery.... any clue?
Clean install of stock to test in the first instance, then a clean install of the rom you were using. Could be the 'connectivity just goes away for no particular reason at all' thing I used to see on AOSP roms all the time when I ran them on my S2 (and was the reason I stopped using them).
You could also try flashing modems; starting with modems bundled with stock roms released by the carrier you're currently using.
It could still also quite easily be a carrier-side issue despite what you've said/checked. Everyone (on here) always thinks it's a phone-side issue when connectivity is poor/changes/non-existent, 80% of the time it's carrier-side.
Thanks four the advice MistahBungle. I'll try with stock.
On the other hand, the carrier issue is discarded:
- same SIM works in a different phone, in sake physical location.
- a different SIM, different carrier, different country, shoes the same behavior in the phone
Sends to me that that's a phone thing...
Enviado desde mi GT-I9100 mediante Tapatalk
Yep more than likely something phone-side with that extra info you've provided. Try those suggestions & see how you go.
In my case it was waterlogged mainboard issue. I don't think that's the case with you but still, even after trying all the above you still face the same then the antenna module would be worth checking.
Praying for your s2's soul and your pockets
Restoring Stock firmware (I9100XWMS3_I9100FOPLS6_FOP) didn't help. ((
Now I'm completely lost... (((
Try flashing some modems for your area/device.
otura said:
Restoring Stock firmware (I9100XWMS3_I9100FOPLS6_FOP) didn't help. ((
Now I'm completely lost... (((
Click to expand...
Click to collapse
That's because you didn't read my post. I did suggest two other things, which Banjara helpfully/unnecessarily repeated.
If you want this issue resolved, it's going to take some effort on your part.
Just installed PacMan stable release (milestone 1).
Apart from the same behavior with the data connection, the browser does not launch.
Installing Resurection Remix right now. Let's see.
Just installed Resurrection Remix and same behavior.
Trying to find AOSP KK modems now, if possible from Netherlands network providers, ideally from KPN.
I have a question:
If I have flashed a AOSP rom (i.e. Resurrection Remix) which is KitKat, can I flash a stock modem wich is Jelly Bean?
I'm asking so because you adviced me to flash modems bundled in stock roms (which for I9100 stop at 4.1.2) on a AOSP rom (which is 4.4.2 kitkat)
Thank you for your support.
otura said:
I have a question:
If I have flashed a AOSP rom (i.e. Resurrection Remix) which is KitKat, can I flash a stock modem wich is Jelly Bean?
I'm asking so because you adviced me to flash modems bundled in stock roms (which for I9100 stop at 4.1.2) on a AOSP rom (which is 4.4.2 kitkat)
Thank you for your support.
Click to expand...
Click to collapse
AFAIK,Modem is not dependent of the android version for u so u can flash the modem .
Yes u can downgrade from 4.4.2 to 4.1.2 (but perform all the necessary wipes before doing the downgrade)
it worked!!!
Flashing modem.bin from the stock 4.1.2 on the Resurection Remix worked )))
Thanks MistahBungle and the others for the support!!!
Let's see now if it works also with NeatROM!!
Thanks again!!!
FYI, NeatROM worked as well!!!
Enviado desde mi GT-I9100 mediante Tapatalk
Hi,
I have an issue with the radio of my phone. When I switch to 3G, I get a weak signal varying between one and a max of 3 bars. The phone gets heated up and the battery starts draining. Please find below the device and OS that I am using
Device: Samsung Galaxy S2
OS: CM M12
Base band: I9100DDLP8
Location: Bangalore, India
I have inserted my Sim in a different phone and have found that nothing is wrong with the connectivity in the area. I have no issues when I switch to 2G. I have tried flashing various modems and RILs but in vain. I have also tried using the Getril app to correct the issue but without much success.
Here is what I have tried and noticed
1) Flashed the modem DDLS9 and DDLPB. The 3G signal strength is good when I flashed these modems but I am unable to make or receive calls. I have flashed the RIL along with the modem.
2) On trying the modems XXLS6, XXLS8, XXLS9 and XXKH3, nothing has changed and I still got the weak 3G signal though am able to make and receive calls.
I have also tried flashing a stock rom (Jelly bean) but the issue was still there.
Any help is much appreciated. Thanks in advance
As you have tried all the radios for the location already, I am not going to suggest you to do that.
However, I am interested in knowing when did the phone start showing signs of weak 3g signal? Did it happen one day suddenly or did you make any changes to software/hardware which might have triggered it?
banjara said:
As you have tried all the radios for the location already, I am not going to suggest you to do that.
However, I am interested in knowing when did the phone start showing signs of weak 3g signal? Did it happen one day suddenly or did you make any changes to software/hardware which might have triggered it?
Click to expand...
Click to collapse
It started happening after I switched to Cyanogenmod 11 M1. I was under an impression that the issue is with the connectivity until I tried my sim card on a different phone.
I will suggest you to flash the stock ROM or some other ROM.
Sent from my SM-G900H
banjara said:
I will suggest you to flash the stock ROM or some other ROM.
Sent from my SM-G900H
Click to expand...
Click to collapse
Tried installing the stock rom but it didn't work.
Number one thing I also say about modems and rils, never use getril. Are you trying to flash jelly bean stock rom? If you haven't yet, try flashing it as it will also flash the stock modem too. If yes, try finding older versions of the compatible baseband firmware (or modem) and try flashing it. (Yes, you can flash older modems that originated from ics or jellybean).
First of all this is my first post. Hello to everyone. I have been searching/reading thru these forums. Great source of info.
Phone info:
Currently S-OFF, unlocked, lateset AT&T 4.4.2 firmware, viperone 6.2.1, twrp
I have a pretty good comprehension of how to install or revert pretty much anything that can be done to this phone and have done so with great success. What I don't understand is the relationship between the firmware base of an RUU and the build of any given ROM. How is it that a custom Rom based off let's say x.xx.401.x work with x.xx.502.x main version? The devs say to update to the most current available firmware. Does that mean I have to flash a firmware base that matches what the Rom base for optimal performance? Because I originally thought that was the case and when I did my phone developed syncing issues particularly with the stock mail and weather apps. They would only sync over WiFi. Everything else about the phone worked as normal. Believing there was a problem with the Rom I flashed a few different popular roms on here. Always returning to full AT&T stock first. I later fully converted to GPE and to my surprise everything worked as normal. So I then converted to stock developer edition by way of zip flash and RUU exe. (By the way, when I say stock I mean s-off & unlocked but otherwise factory.) Received all the ota's. Main version would show as x.xx.1540.x. supposedly this would make my phone a dev edition with AT&T as the provider. And yet the syncing problems returned. So once again I returned back to factory AT&T 4.4.2 and all returned to normal. I then decided to try and use a Rom based off 4.4.2 and not one from 4.4.3; expecting the syncing issues to return only this time they didn't. So now I am really confused.
My questions are:
If coming from 4.4.2 factory firmware, is it best to run a Rom from the same base or am I doing something wrong and I should be able to use a Rom from a newer base on an older firmware?
If the developer edition and GPE can be carried by AT&T then why was I having syncing issues with the developer edition and not GPE?
I thought by being s-off I should be able to flash any RUU from any carrier without problems, just that I would be limited to the network capabilities of the actual service provider.
Everything I know about this stuff I learned from this forum. But I think I missed something.
My AT&T M7 always works best on the stock software.
The only thing I could figure is that AT&T have refined the software and radio so well that all the other versions pale in comparison.
I noticed the Developers Edition always had a horrible Bluetooth and WiFi radio. Signal strength was always weak compared to the stock AT&T software.
To answer your questions
Flash any version Roms you want on the latest AT&T firmware. And you'll have the best your phone can be.
clsA said:
My AT&T M7 always works best on the stock software.
The only thing I could figure is that AT&T have refined the software and radio so well that all the other versions pale in comparison.
I noticed the Developers Edition always had a horrible Bluetooth and WiFi radio. Signal strength was always weak compared to the stock AT&T software.
To answer your questions
Flash any version Roms you want on the latest AT&T firmware. And you'll have the best your phone can be.
Click to expand...
Click to collapse
I get so mixed up with all the terms being used interchangeably. So to clarify, as long as I am using the latest firmware from AT&T (currently 5.12.502.2 kk4.4.2), I can flash any custom ROM base. Whether it is based on 4.4.2 or higher. Correct?
I still want to know why I experienced the sync problems while running the factory x.xx.1540.x dev edition but not with the GPE. I never tried the factory x.xx.401.x WWE firmware either. However, I just got an sim unlock code from AT&T earlier today. I'm gonna try that maybe tomorrow and see if it makes a difference altho I don't believe it should. And I'm not gonna switch to a different provider.
Honestly, I was happy with my phone before I got wrapped up in all of this. I just decided to tinker with the phone and the mod bug has bitten.
ANGRY_robert said:
I get so mixed up with all the terms being used interchangeably. So to clarify, as long as I am using the latest firmware from AT&T (currently 5.12.502.2 kk4.4.2), I can flash any custom ROM base. Whether it is based on 4.4.2 or higher. Correct?
I still want to know why I experienced the sync problems while running the factory x.xx.1540.x dev edition but not with the GPE. I never tried the factory x.xx.401.x WWE firmware either. However, I just got an sim unlock code from AT&T earlier today. I'm gonna try that maybe tomorrow and see if it makes a difference altho I don't believe it should. And I'm not gonna switch to a different provider.
Honestly, I was happy with my phone before I got wrapped up in all of this. I just decided to tinker with the phone and the mod bug has bitten.
Click to expand...
Click to collapse
I think I figured this out. I continued to flash different ROMs and firmwares with the same results as I posted in the OP. Then earlier tonight I decided to try to convert to developer edition again (x.xx.1540.x) and flashed an ruu.zip, went thru the setup process, and as before the same issues returned. Then I had an idea; lets try something I haven't done yet. I pulled the SD card and factory reset the phone. After I completed the basic setup process I inserted the SD card and let the phone do its thing. The phone now works as it should (same as it does with the AT&T xx.502.x firmware installed).
Just figured I would pass this along.
Cheers
I give up
I thought I had this figured out. Last night after to converting to dev edition with all updates, everything seemed normal. I flashed the latest viperone rom as it is the rom I want. Turn the phone on this morning and the sync problems are present once again. I have searched thru a tom of pages on this sight alone. I cant find an answer. So its back to stock at&t.
I solved the problem. Incorrect settings in 4636 menu.