Let me give some info on my situation:
The phone has unlocked boot loader
I got a replacement phone and wanted to odin back to stock to send back my original phone.
I used Odin to flash back to stock but the phone will not boot and I cannot get into recovery.
I am able to use Odin with success every time. I have followed instruction on how to return to stock and everything goes perfectly until I try to reboot or go into recovery. I just get the Samsung splash screen and it blinks every couple of seconds.
Any ideas?
so you pulled battery, reinsert, three finger combo(vol up/home/power) until you see recovery booting and it wont boot into recovery?
droidstyle said:
so you pulled battery, reinsert, three finger combo(vol up/home/power) until you see recovery booting and it wont boot into recovery?
Click to expand...
Click to collapse
correct, I am able to get into download mode but not into recovery and I have tried everything. I am not a noob but am totally lost here.
I can use Odin without any issue.
droidstyle said:
so you pulled battery, reinsert, three finger combo(vol up/home/power) until you see recovery booting and it wont boot into recovery?
Click to expand...
Click to collapse
I have been using your instructions to go back to stock using odin from any rom. Do I need to flash the PIT with any stock odin file?
I have successful used the route66, Revision3 and Imuts files. all flash in Odin gave me the "SUCCESS" but then I cannot boot into recovery or start the phone.
Could it be because I had an unlocked bootloader? Is there a way to reinstall just a bootloader and/or recovery.
mzimand said:
I have been using your instructions to go back to stock using odin from any rom. Do I need to flash the PIT with any stock odin file?
I have successful used the route66, Revision3 and Imuts files. all flash in Odin gave me the "SUCCESS" but then I cannot boot into recovery or start the phone.
Could it be because I had an unlocked bootloader? Is there a way to reinstall just a bootloader and/or recovery.
Click to expand...
Click to collapse
If you're returning it use the OTA jb image (full wipes and locks boot loader) and the pit file.
Sent from the dark on a Note 2
kintwofan said:
If you're returning it use the OTA jb image (full wipes and locks boot loader) and the pit file.
Sent from the dark on a Note 2
Click to expand...
Click to collapse
I just tried this and got the same results. I got the "PASS" in Odin after flashing the PIT and the stock JB Image. I am still stuck at a slow blinking Samsung screen.
I am open to any ideas
wizeguydesigns had the same problem...you didnt flash the jedi rom prior did u?
droidstyle said:
wizeguydesigns had the same problem...you didnt flash the jedi rom prior did u?
Click to expand...
Click to collapse
Yes, this was my problem exactly!! I know you weren't saying this, but it wasn't the Jedi ROM that did it just to clear that up. It was a ROM that I was beta testing that hasn't been released yet. I was on Jedi ROM prior to flashing the beta test ROM which I think is what you meant.
OP, did you happen to be testing a ROM and this happened? I won't name it but at least tell me that much.
Sent from my SCH-I605 using xda premium
WizeGuyDezignz said:
Yes, this was my problem exactly!! I know you weren't saying this, but it wasn't the Jedi ROM that did it just to clear that up. It was a ROM that I was beta testing that hasn't been released yet. I was on Jedi ROM prior to flashing the beta test ROM which I think is what you meant.
OP, did you happen to be testing a ROM and this happened? I won't name it but at least tell me that much.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
ahh thanks for clearing that up.
WizeGuyDezignz said:
Yes, this was my problem exactly!! I know you weren't saying this, but it wasn't the Jedi ROM that did it just to clear that up. It was a ROM that I was beta testing that hasn't been released yet. I was on Jedi ROM prior to flashing the beta test ROM which I think is what you meant.
OP, did you happen to be testing a ROM and this happened? I won't name it but at least tell me that much.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
Yes I was flashing a ROM. It was a sprint rom that i was trying to patch. It was whompasrus. Where you able to fix the issue?
Sent from my SCH-I605 using Tapatalk 2
mzimand said:
Yes I was flashing a ROM. It was a sprint rom that i was trying to patch. It was whompasrus. Where you able to fix the issue?
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Yep, that was the ROM that I was testing as well. I know you won't want to hear this, but I wasn't able to fix the issue.
Sent from my SCH-I605 using xda premium
WizeGuyDezignz said:
Yep, that was the ROM that I was testing as well. I know you won't want to hear this, but I wasn't able to fix the issue.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
I had a feeling that is was bricked as I have tried everything I could to fix it. It is not that big of a deal because the screen was shattered on it last week and I paid the insurance for a replacement and was sending it back anyways.
Related
Hello I bought a rooted note 2 and when I go to flash a new rom it always fails. Do I need to unroot go srock and re root?
Sent from my SCH-I605 using xda app-developers app
phatchef1 said:
Hello I bought a rooted note 2 and when I go to flash a new rom it always fails. Do I need to unroot go srock and re root?
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Rooting doesn't give you the ability to flash ROMs, you have to have the bootloader unlocked and have a custom recovery such as twrp or cwm.
Thought you needed it unlocked to have a rom on it to start with. It has the cleanrom se1.5 on it now
Sent from my SCH-I605 using xda app-developers app
phatchef1 said:
Thought you needed it unlocked to have a rom on it to start with. It has the cleanrom se1.5 on it now
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Ok, you didn't say that you only said it was rooted.
What steps are you taking to flash a new ROM?
You said it fails, what's the failure?
Have you tried going into recovery mode? Turn off your phone, press and hold volume up+home button+and power button till u reach the boot animation then release the buttons. You will either be in cwm or twrp. If you reached this step, then you can flash a rom that is built for your specific note 2 version. From the recovery menus you can follow the necessary steps to install. Let us know what you see.
Ps make sure you do a back up just incase
Sent from my SGH-I317 using xda premium
I can get into recovery mode just when I go to install new rom it fails
Sent from my SCH-I605 using xda app-developers app
What recovery are you running?
phatchef1 said:
I can get into recovery mode just when I go to install new rom it fails
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
What error message are you getting and what steps are you taking. Also what recovery are you using?
Sent from my SCH-I605 using Tapatalk 2
update your recovery...most likely your on the original twrp that came with adams first unlock method.
droidstyle said:
update your recovery...most likely your on the original twrp that came with adams first unlock method.
Click to expand...
Click to collapse
To do this get GooManager from the Play Store, and follow the directions in the description. I believe you press menu and then install a script.
phatchef1 said:
Hello I bought a rooted note 2 and when I go to flash a new rom it always fails. Do I need to unroot go srock and re root?
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
I'd clean the phone up and return it to stock. Start from there.
Also, are you using a custom recovery like twrp or cwm? also, is your BL unlocked?
More info is needed to assist you further, broseph.
droidstyle said:
update your recovery...most likely your on the original twrp that came with adams first unlock method.
Click to expand...
Click to collapse
This is most likely your problem.
BennyJr said:
This is most likely your problem.
Click to expand...
Click to collapse
I didn't update twrp until last week. Prior to that I flashed carbon, rootbox, liquid, beans, eclipse, jedi, and cleanrom.
ok im running clean rom 1.5 and for recovery i have twrp. how do i update the recovery?
geoff5093 said:
To do this get GooManager from the Play Store, and follow the directions in the description. I believe you press menu and then install a script.
Click to expand...
Click to collapse
I'll bump this for you
Sent from my SCH-I605 using Tapatalk 2
ok i updated the twrp. wiped the cache and factory reset and then went to flash a rom and it says FAILED e:sigature verification failed and the next lineerror flashing zip
what did i do wrong? i flashed roms on my old s3 that was rooted this phone just doesnt want to flash roms over
phatchef1 said:
ok i updated the twrp. wiped the cache and factory reset and then went to flash a rom and it says FAILED e:sigature verification failed and the next lineerror flashing zip
what did i do wrong? i flashed roms on my old s3 that was rooted this phone just doesnt want to flash roms over
Click to expand...
Click to collapse
Did you check the md5 and what ROM are you flashing?
Sent from my SCH-I605 using Tapatalk 2
how does a person check the md5 and i have tried the beans11 and jedi10 and both have errors and fail
There is an option in TWRP that makes it look for an MD5 match... but unless you have the MD5 accessible to TWRP it will fail and not install.
Make sure the option is not checked when you go to flash.
To manually check the MD5 yourself to verify your downloads... you need an app on your PC that has the ability. Google will point you right.
Then to check the MD5, you have the app analyze the file and compare it to the MD5 provided in the ROM thread.
thanks unchecked the md5 stuff and it works thanks
So i was going to flash a rom I made a back up, I hit fixed permissions. and now all I have is Samsung Galaxy S4 logo and is just stuck there. I can get into twrp and have tried wiping and starting from a clean slate and restoring the back up but still get the galaxy logo? any suggestions ?
**have just tried to use odin and fails also*** How do I get back to stock please? Anyone please help
bump
Imprezive13 said:
bump
Click to expand...
Click to collapse
Have you tried flashing a stock ROM from TWRP?
-------edit----------
I just remembered. This used to happen on the Note 2 at times. If you're booting and get the Samsung splash screen, try going to TWRP and doing a Factory Reset a couple times. No idea if it will work, but with the Note that would usually clear whatever block existed and allow the ROM to boot past the splash screen. Good luck.
eakeller said:
Have you tried flashing a stock ROM from TWRP?
Click to expand...
Click to collapse
what do you mean ? first time ever having a problem with this. are you talking about the SCH-I545_MDK_562219_Stock_Restore.tar file ?
Imprezive13 said:
what do you mean ? first time ever having a problem with this. are you talking about the SCH-I545_MDK_562219_Stock_Restore.tar file ?
Click to expand...
Click to collapse
If it exists, it would basically be that ROM stuck into a .zip file which could be flashed from TWRP. I'm not sure it exists, was just browsing the Dev thread for you to see if anyone posted it. There is a version here http://forum.xda-developers.com/showthread.php?t=2292707 , but I'm not familiar with Loki enough to say whether or not you have it.
eakeller said:
If it exists, it would basically be that ROM stuck into a .zip file which could be flashed from TWRP. I'm not sure it exists, was just browsing the Dev thread for you to see if anyone posted it. There is a version here http://forum.xda-developers.com/showthread.php?t=2292707 , but I'm not familiar with Loki enough to say whether or not you have it.
Click to expand...
Click to collapse
Well for right now im trying to just get the phone back to its working condition. trying to using odin, but fails every time. and not sure what i should do.
Imprezive13 said:
Well for right now im trying to just get the phone back to its working condition. trying to using odin, but fails every time. and not sure what i should do.
Click to expand...
Click to collapse
If Odin isn't working for you, a solution might be had via TWRP since you can still get into the recovery. If you flash your ROM or try your backup, does the install complete or does it crash? Have you wiped cache, dalvik, system, and data before the flash?
-edit-
Sorry, just saw your OP where you said you wiped and tried. If I were you my next step would be trying a different ROM just to see if you can get something booting.
eakeller said:
If Odin isn't working for you, a solution might be had via TWRP since you can still get into the recovery. If you flash your ROM or try your backup, does the install complete or does it crash? Have you wiped cache, dalvik, system, and data before the flash?
Click to expand...
Click to collapse
Trying again. First wiping wiped cache, dalvik, system, and data , then restoring back up. I've tried this multiple times before hopefully it works this time. But generally when i hit reboot system afterward it just hangs at the Samsung Galaxy IV boot screen and does nothing.
Imprezive13 said:
Trying again. First wiping wiped cache, dalvik, system, and data , then restoring back up. I've tried this multiple times before hopefully it works this time. But generally when i hit reboot system afterward it just hangs at the Samsung Galaxy IV boot screen and does nothing.
Click to expand...
Click to collapse
After your backup restores, try using TWRP to do a Factory Reset a couple times before rebooting. Also wipe cache/dalvik again before the boot.
Failed again stuck at Samsung Galaxy S4 boot screen
eakeller said:
After your backup restores, try using TWRP to do a Factory Reset a couple times before rebooting. Also wipe cache/dalvik again before the boot.
Click to expand...
Click to collapse
Stuck again
Imprezive13 said:
Stuck again
Click to expand...
Click to collapse
Sorry to hear that, man. I'm out of ideas and hopefully someone with more know-how can give the solution.
Sent from my SCH-I545 using Tapatalk 2
I would try downloading a ROM to your computer then copying it to a microsd, put the card in your phone and then try to flash the fresh ROM from TWRP. (After wiping everything again.)
Sent from my SCH-I545 using Tapatalk 2
slim6596 said:
I would try downloading a ROM to your computer then copying it to a microsd, put the card in your phone and then try to flash the fresh ROM from TWRP. (After wiping everything again.)
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
Ive been looking for the stock rom files no luck at the moment.
Maybe this one?
http://forum.xda-developers.com/showthread.php?t=2292707
Sent from my SCH-I545 using Tapatalk 2
slim6596 said:
Maybe this one?
http://forum.xda-developers.com/showthread.php?t=2292707
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
downloading now wish me luck
Good luck to you.
Sent from my SCH-I545 using Tapatalk 2
slim6596 said:
Good luck to you.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
got it working. on a deoxed rom. but is there a way to go completely back to stock using odin ?
http://forum.xda-developers.com/showthread.php?t=2289325
Sent from my SCH-I545 using Tapatalk 2
slim6596 said:
http://forum.xda-developers.com/showthread.php?t=2289325
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
Well went to restart the phone and now its stuck on a Samsung logo with a unlocked icon thats says custom underneath it and just sits there.
So I had originally had TWRP/Hyperdrive on my phone, and switched to CWM/Cyanogenmod. I noticed now that I seem to have two different recoveries on my phone, because if I hold up+home+power I can go to a different version of CWM Recovery than if I use the Rom Manager app to boot into recovery. How would I rectify this? Would it involve wiping the /boot partition? I don't know where/how recoveries are stored so I don't understand how I can have two.
Doing a fresh install of a ROM has not resolved this by the way. And actually currently, I can't hold the buttons and boot into recovery at all, it gets stuck on the Samsung logo. I can only get into recovery via Rom Manager or Reboot options if I'm in android.
Markstache said:
So I had originally had TWRP/Hyperdrive on my phone, and switched to CWM/Cyanogenmod. I noticed now that I seem to have two different recoveries on my phone, because if I hold up+home+power I can go to a different version of CWM Recovery than if I use the Rom Manager app to boot into recovery. How would I rectify this? Would it involve wiping the /boot partition? I don't know where/how recoveries are stored so I don't understand how I can have two.
Doing a fresh install of a ROM has not resolved this by the way. And actually currently, I can't hold the buttons and boot into recovery at all, it gets stuck on the Samsung logo. I can only get into recovery via Rom Manager or Reboot options if I'm in android.
Click to expand...
Click to collapse
I would just Odin back to stock MDK and start fresh and choose whichever recovery suits you. I had to do the same a while back myself
Sent from my SCH-I545 using Tapatalk
Mistertac said:
I would just Odin back to stock MDK and start fresh and choose whichever recovery suits you. I had to do the same a while back myself
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I've done that so many times.
Markstache said:
I've done that so many times.
Click to expand...
Click to collapse
My fault ...I see where you adressed that in the last part of your post. I'm no expert either on how recoveries are stored and executed.
I would think though that flashing stock mdk would fix this as it did for me. I used ROM manager to install cwm then I flashed Philz and haven't had a problem since. Hope someone else can help you.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
My fault ...I see where you adressed that in the last part of your post. I'm no expert either on how recoveries are stored and executed.
I would think though that flashing stock mdk would fix this as it did for me. I used ROM manager to install cwm then I flashed Philz and haven't had a problem since. Hope someone else can help you.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
The only way to fix is to Odin back to factory image and start over.
Sent from my SCH-I545 using xda app-developers app
cbmggm said:
The only way to fix is to Odin back to factory image and start over.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Yea that's what I said before too but the op said they've done that many times with no luck...
Sent from my SCH-I545 using Tapatalk
cbmggm said:
The only way to fix is to Odin back to factory image and start over.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
That's what I would have figured would fix it, because I'm pretty sure that's supposed to wipe /boot, but I found out I cannot flash kernels on my phone for some reason and when having to fix softbricks while experimenting with why it doesn't work and flashing different kernels, I had to do that whole process so many times I can go from softbrick back to where I'm at now in about 20 minutes.
Is your device in factory mode when using touchwiz roms?
jamesd1085 said:
Is your device in factory mode when using touchwiz roms?
Click to expand...
Click to collapse
I have no idea what you mean, and I'm not using anything touchwiz based anymore.
Markstache said:
I have no idea what you mean, and I'm not using anything touchwiz based anymore.
Click to expand...
Click to collapse
OK...well try something real quick for me...use a root manager and open your efs folder...are the files still there...if not your efs folder has been formatted to the incorrect format... That would explain funky recovery issues and not being able to flash kernels...that's the only things I can think of
jamesd1085 said:
OK...well try something real quick for me...use a root manager and open your efs folder...are the files still there...if not your efs folder has been formatted to the incorrect format... That would explain funky recovery issues and not being able to flash kernels...that's the only things I can think of
Click to expand...
Click to collapse
It sure is there and has files in it.
What is that folder? Should I delete the contents?
Markstache said:
It sure is there and has files in it.
What is that folder? Should I delete the contents?
Click to expand...
Click to collapse
Definitely don't delete your efs folder. Actually it's good practice to back it up
Sent from my SCH-I545 using Tapatalk
Markstache said:
It sure is there and has files in it.
What is that folder? Should I delete the contents?
Click to expand...
Click to collapse
No!!!!...you will lose your number and all data capability...just wanted to make sure everything was still mounting properly... I'm at a loss as to what else could be causing your issues
Markstache said:
I have no idea what you mean, and I'm not using anything touchwiz based anymore.
Click to expand...
Click to collapse
I'd find someone like Philz or a TWRP compiler to ask if u haven't already gone that route. I'm sure one of them will know. Hopefully [emoji41]
Sent from my SCH-I545 using Tapatalk
Something just occured to me. When flashing back to stock with odin I always use the nowipe image because it's all I can find. I think that technically means boot was never wiped. Would that explain my phenomena? Also where to find stock that will wipe?
Markstache said:
Something just occured to me. When flashing back to stock with odin I always use the nowipe image because it's all I can find. I think that technically means boot was never wiped. Would that explain my phenomena? Also where to find stock that will wipe?
Click to expand...
Click to collapse
I've always used this one
http://forum.xda-developers.com/showthread.php?t=2289325
I'm not 100% if its no wipe as it doesn't say. But it you haven't tried this one yet may be worth a shot
Sent from my SCH-I545 using Tapatalk
Mistertac said:
I've always used this one
http://forum.xda-developers.com/showthread.php?t=2289325
I'm not 100% if its no wipe as it doesn't say. But it you haven't tried this one yet may be worth a shot
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
^^^this should fix you up...but backup everything you can to external SD or computer...when it says full wipe its no joke
Mistertac said:
I've always used this one
http://forum.xda-developers.com/showthread.php?t=2289325
I'm not 100% if its no wipe as it doesn't say. But it you haven't tried this one yet may be worth a shot
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
So I flashed that one via Odin, followed the guide to root and everything step by step, and now that I'm back on stock kernel and want to install CWM Recovery, I downloaded Rom Manager and hit install recovery and it says everything worked but if I boot into recovery it's just the android stock recovery.
EDIT: Another thing I thought of. Could the fact that at one point I used this method to install CWM recovery on my phone have caused there to be two different recoveries running parallel?
http://galaxys4root.com/galaxy-s4-r...on-att-or-verizon-galaxy-s4-sgh-i337sch-i545/
UPDATE: Using this method I installed the latest version of CWM Recovery Touch but Rom Manager still thinks the normal version is installed, though now if I hit reboot to recovery from the app it actually takes me to the touch instead of a separate one. Is the app dumb or do I still have an issue? Also I cannot install kernels without tripping the count and having my phone tell me I need to go to a verizon store.
http://wiki.cyanogenmod.org/w/Install_CM_for_jfltevzw
Markstache said:
So I flashed that one via Odin, followed the guide to root and everything step by step, and now that I'm back on stock kernel and want to install CWM Recovery, I downloaded Rom Manager and hit install recovery and it says everything worked but if I boot into recovery it's just the android stock recovery.
EDIT: Another thing I thought of. Could the fact that at one point I used this method to install CWM recovery on my phone have caused there to be two different recoveries running parallel?
http://galaxys4root.com/galaxy-s4-r...on-att-or-verizon-galaxy-s4-sgh-i337sch-i545/
UPDATE: Using this method I installed the latest version of CWM Recovery Touch but Rom Manager still thinks the normal version is installed, though now if I hit reboot to recovery from the app it actually takes me to the touch instead of a separate one. Is the app dumb or do I still have an issue? Also I cannot install kernels without tripping the count and having my phone tell me I need to go to a verizon store.
http://wiki.cyanogenmod.org/w/Install_CM_for_jfltevzw
Click to expand...
Click to collapse
ROM manager may actually be the issue.
And as far as installing kennels I've never had an issue myself. The last link you posted is about flashing the md2 kernel in order to root the phone. Do you mean that?? Or installing say a KToonsez kernel after you're already rooted and have your custom recovery?
Sent from my SCH-I545 using Tapatalk
Mistertac said:
ROM manager may actually be the issue.
And as far as installing kennels I've never had an issue myself. The last link you posted is about flashing the md2 kernel in order to root the phone. Do you mean that?? Or installing say a KToonsez kernel after you're already rooted and have your custom recovery?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
As in installing a KT kernel after rooting and having a custom recovery and ROM on my phone. Right now I have three 3/22 nightly cyanogen up and running but as soon as I install kt it trips the Verizon security and on have to flash back to stock kernel to use my phone. Booting into Odin and canceling out to restart does not let me get past the yellow triangle
Have a verizon s4 that was originally on mdk. I rooted, and have been using hyperdrive for some time. After many sudden random reboots, I decided to change to another rom, Gdux. When I lost wifi, it was recommended to flash a new kernel to restore this functionality. As soon as I did this, I got some screen that said return your phone to verizon, something about unauthorized software.
Searched and searched the net and found that I could odin back to stock again. I followed all instructions,but now phone won't boot past verizon splash screen, and it gets hot. REALLY hot while sitting there on verizon splash screen. I can't get to recovery, only download mode after I pull battery. Going to "lose" phone for warranty replacement if I can't get it to work. Please help!!!
Flash an MDK stock odin tar in download. You'll be good as new and be able to do what you want again
aidankiller4 said:
Flash an MDK stock odin tar in download. You'll be good as new and be able to do what you want again
Click to expand...
Click to collapse
Ive tried for 2 days to find one in tar format. Only found one and it won't download on my computer. Know where to find file?
Try this http://www.androidfilehost.com/?fid=22979706399752783
Tried that and get stuck on Verizon screen
Sent from my SM-G730V using xda app-developers app
aidankiller4 said:
Try this http://www.androidfilehost.com/?fid=22979706399752783
Click to expand...
Click to collapse
The phone boots to verizon splash screen and sits there, gets almost too hot to hold, and still nothing. I pulled battery after 30 minutes. Should I try to flash this and then another kernel tar?
Yeah
Make sure you're checking the .tar files MD5 for accuracy. Make sure it's compatible with your radio/baseband version as well.
Sent from my SCH-I545 using xda app-developers app
RBarnett09 said:
Make sure you're checking the .tar files MD5 for accuracy. Make sure it's compatible with your radio/baseband version as well.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
I know that I originally started with MDK, there's no way to check anything now because it won't boot. I rooted the day I got the phone and haven't taken an OTA.
Still doesn't work, any other files I can try?
bjlandt said:
I know that I originally started with MDK, there's no way to check anything now because it won't boot. I rooted the day I got the phone and haven't taken an OTA.
Still doesn't work, any other files I can try?
Click to expand...
Click to collapse
If you haven't taken any OTA's or flashed any radios, then you don't need to worry about that part.
Flashing the .tar file SHOULD have the kernel included... or at least I'm thinking it would. It should.
But after It flashes in Odin, let it sit for a good 20 minutes after it says success. Just so you can be assured that it had the time to flash successfully.
Sent from my SCH-I545 using xda app-developers app
RBarnett09 said:
If you haven't taken any OTA's or flashed any radios, then you don't need to worry about that part.
Flashing the .tar file SHOULD have the kernel included... or at least I'm thinking it would. It should.
But after It flashes in Odin, let it sit for a good 20 minutes after it says success. Just so you can be assured that it had the time to flash successfully.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Is there a way to flash a twrp recovery through odin? I have several backups on my sd card, and I think there is one on there where I backed up everything when I first got it.
Yes.
Here's a link to some instructions and and a page that can send you to the TWRP Odin compatible file.
http://www.theandroidsoul.com/latest-twrp-recovery-for-verizon-galaxy-s4-android-4-4-compatible/
Sent from my SCH-I545 using xda app-developers app
RBarnett09 said:
Yes.
Here's a link to some instructions and and a page that can send you to the TWRP Odin compatible file.
http://www.theandroidsoul.com/latest-twrp-recovery-for-verizon-galaxy-s4-android-4-4-compatible/
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Thank you!!! Found a file that worked!!! Thanks for all the help!
bjlandt said:
Thank you!!! Found a file that worked!!! Thanks for all the help!
Click to expand...
Click to collapse
Yes sir. Glad I could help.
You're welcome.
Sent from my D2LTE (D2VZW) using XDA app-developers app
So I have been working on a friend of mines Verizon Note 2 (SCH-I605) and have run into an issue... I had rooted it successfully to root66 VZW stock sys, then attempted to unlock the bootloader according to the [email protected] galaxynote2root(dot)com/galaxy-note-2-tutorials/how-to-unlock-bootloader-on-verizon-galaxy-note-2-sch-i605.... without reviewing the multiplicity of comments below the article which should have caught my attention and let me know that many people were unsuccessful with that method.
So now i appear to be screwed because it will boot into ODIN but thats it. I cant even get into stock recovery. Upon boot the Galaxy Note 2 splash stays on indefinitely, as it does when i follow the instructions on this site to restore it from a failed unlock, or unroot...... ODIN 3 + sch-I605-16gb.pit + Root66-VZW-stock_sys, when it reboots following flash the splash screen stays on. I have checked the NAND erase All as suggested on this site, and it makes no difference.
When vol up/home/power is pressed it says something to the effect that 'you are a dumb*ss and have screwed up your firmware dipsh*t'....
So what now? Id hate to have to replace my buddies Note 2.... and I had absolutely 0 difficulties unlocking and rooting my HTC One, so this sucks....
Use this guide to flash back to the appropriate version.
http://forum.xda-developers.com/showthread.php?t=2024207
It's a great guide. Saved me last week after I flashed the wrong file in Odin.
Sent from my SCH-I605 using Tapatalk
michigan66 said:
Use this guide to flash back to the appropriate version.
http://forum.xda-developers.com/showthread.php?t=2024207
It's a great guide. Saved me last week after I flashed the wrong file in Odin.
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
yea i did that already to no avail.... used odin to flash the pit and root66... doesnt boot...
Moridin68 said:
yea i did that already to no avail.... used odin to flash the pit and root66... doesnt boot...
Click to expand...
Click to collapse
Have you tried using a different image? What version of stock was on it before you messed with it?
Edit: If the stock version wasn't MJ9 or above then don't flash those. There currently isn't and probably won't be a way to unlock the bootloader on MJ9 and above.
Sent from my SCH-I605 using XDA Premium 4 mobile app
BluGuy said:
Have you tried using a different image? What version of stock was on it before you messed with it?
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
well, thats a good question... it was already in a messed up state when i got ahold of it... i tried flashing root66 and it kept failing, i checked NAND ERASE ALL and flashed CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar
as per a suggestion i read on xda.. it too failed as well, but then when i flashed root66 again (also i think with NAND ERASE on) it booted up beautifully...
Moridin68 said:
well, thats a good question... it was already in a messed up state when i got ahold of it... i tried flashing root66 and it kept failing, i checked NAND ERASE ALL and flashed CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar
as per a suggestion i read on xda.. it too failed as well, but then when i flashed root66 again (also i think with NAND ERASE on) it booted up beautifully...
Click to expand...
Click to collapse
i have recently read on a site that offers a bootloader downgrade service that if it has a knox counter, then it was updated to a version with a 'permalocked' bootloader... and if this is referring to the counter on the ODIN screen that says KNOX WARRANTY VOID:0 then this one is such a device.....
Moridin68 said:
well, thats a good question... it was already in a messed up state when i got ahold of it... i tried flashing root66 and it kept failing, i checked NAND ERASE ALL and flashed CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar
as per a suggestion i read on xda.. it too failed as well, but then when i flashed root66 again (also i think with NAND ERASE on) it booted up beautifully...
Click to expand...
Click to collapse
When you enter download mode does it say anything about Knox?
Edit: I didn't see your last post. Since it had the updated firmware with Knox, you should be at least able to get the phone working again by flashing that version of the firmware in odin. If it was on Android 4.3 then you should be able to odin MJ9 and it will work again. If it was on 4.4.2 then using odin to flash the ND7 image should fix it.
Sent from my SCH-I605 using XDA Premium 4 mobile app
BluGuy said:
When you enter download mode does it say anything about Knox?
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
on the download screen there is a line that says KNOX WARRANTY VOID:0
BluGuy said:
When you enter download mode does it say anything about Knox?
Edit: I didn't see your last post. Since it had the updated firmware with Knox, you should be at least able to get the phone working again by flashing that version of the firmware in odin. If it was on Android 4.3 then you should be able to odin MJ9 and it will work again. If it was on 4.4.2 then using odin to flash the ND7 image should fix it.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
he hadnt had service on that phone for several months so i guess ill try the older one first. 4.4.2.
and do i flash the pit file with those as well?
this bs is so much more tedious than working with my HTC One.
Moridin68 said:
So I have been working on a friend of mines Verizon Note 2 (SCH-I605) and have run into an issue... I had rooted it successfully to root66 VZW stock sys, then attempted to unlock the bootloader according to the [email protected] galaxynote2root(dot)com/galaxy-note-2-tutorials/how-to-unlock-bootloader-on-verizon-galaxy-note-2-sch-i605.... without reviewing the multiplicity of comments below the article which should have caught my attention and let me know that many people were unsuccessful with that method.
So now i appear to be screwed because it will boot into ODIN but thats it. I cant even get into stock recovery. Upon boot the Galaxy Note 2 splash stays on indefinitely, as it does when i follow the instructions on this site to restore it from a failed unlock, or unroot...... ODIN 3 + sch-I605-16gb.pit + Root66-VZW-stock_sys, when it reboots following flash the splash screen stays on. I have checked the NAND erase All as suggested on this site, and it makes no difference.
When vol up/home/power is pressed it says something to the effect that 'you are a dumb*ss and have screwed up your firmware dipsh*t'....
So what now? Id hate to have to replace my buddies Note 2.... and I had absolutely 0 difficulties unlocking and rooting my HTC One, so this sucks....
Click to expand...
Click to collapse
Did ID:COM turn blue in Odin? . You might have a driver problem.
doctor-cool said:
Did ID:COM turn blue in Odin? . You might have a driver problem.
Click to expand...
Click to collapse
no driver problem... it recognizes the device.... it is blue
Moridin68 said:
he hadnt had service on that phone for several months so i guess ill try the older one first. 4.4.2.
and do i flash the pit file with those as well?
this bs is so much more tedious than working with my HTC One.
Click to expand...
Click to collapse
The older one would be 4.3 which is MJ9. And yes use the pit file with it.
And just in case, I know you probably don't need it, the instructions for flashing with odin are in the return to stock section of the first post in this thread: http://forum.xda-developers.com/showthread.php?t=2024207
Sent from my SCH-I605 using XDA Premium 4 mobile app
BluGuy said:
The older one would be 4.3 which is MJ9. And yes use the pit file with it.
And just in case, I know you probably don't need it, the instructions for flashing with odin are in the return to stock section of the first post in this thread: http://forum.xda-developers.com/showthread.php?t=2024207
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
right you are about 4.3 being older... i was looking through the stock roms in that very guide and saw 4.1.2 and thought that was the one you had mentioned... im downloading MJ9 now..... thanks... hope this works...
so let me ask you this, if i get it back to stock, and rooted again... even though i cant unlock the bootloader, can i get it network unlocked? this entire dilemma occurred because he wants to be able to throw a straight talk sim in this phone.
i had intended to try this www(dot)scottsroms(dot)com/showthread.php?2786-How-I-turned-my-Verizon-Note-2-into-a-World-capable-GSM-phone
once i fixed the disaster....
Moridin68 said:
right you are about 4.3 being older... i was looking through the stock roms in that very guide and saw 4.1.2 and thought that was the one you had mentioned... im downloading MJ9 now..... thanks... hope this works...
so let me ask you this, if i get it back to stock, and rooted again... even though i cant unlock the bootloader, can i get it network unlocked? this entire dilemma occurred because he wants to be able to throw a straight talk sim in this phone.
i had intended to try this www(dot)scottsroms(dot)com/showthread.php?2786-How-I-turned-my-Verizon-Note-2-into-a-World-capable-GSM-phone
once i fixed the disaster....
Click to expand...
Click to collapse
Once you get the phone working you can use Saferoot to root it, that is as long as it's working on MJ9. If the phone had been updated to ND7 which is Android 4.4.2 then there currently isn't a way to root it.
Remember even if you get root you won't be able to use a custom recovery to flash stuff.
Also the sch-i605 is already Sim unlocked from Verizon. You just have to be able to edit the apn settings.
Sent from my SCH-I605 using XDA Premium 4 mobile app
BluGuy said:
Once you get the phone working you can use Saferoot to root it, that is as long as it's working on MJ9. If the phone had been updated to ND7 which is Android 4.4.2 then there currently isn't a way to root it.
Remember even if you get root you won't be able to use a custom recovery to flash stuff.
Also the sch-i605 is already Sim unlocked from Verizon. You just have to be able to edit the apn settings.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok one last thing before i try this MJ9.... if it had been updated then how was i able to flash it to root66 prior to attempting to unlock the bootloader?
i really appreciate your time bro..thanks btw..
Moridin68 said:
ok one last thing before i try this MJ9.... if it had been updated then how was i able to flash it to root66 prior to attempting to unlock the bootloader?
i really appreciate your time bro..thanks btw..
Click to expand...
Click to collapse
Sorry it took so long to get back to you. I don't know a lot about root66 so I can't help you much there, but I do know that while in download mode if it says something about Knox warranty then the bootloader had been updated to a version with Knox which started with mj9 for the i605.
Sent from my SCH-I605 using XDA Premium 4 mobile app
BluGuy said:
Sorry it took so long to get back to you. I don't know a lot about root66 so I can't help you much there, but I do know that while in download mode if it says something about Knox warranty then the bootloader had been updated to a version with Knox which started with mj9 for the i605.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
cool then.. thanks...
BluGuy said:
Sorry it took so long to get back to you. I don't know a lot about root66 so I can't help you much there, but I do know that while in download mode if it says something about Knox warranty then the bootloader had been updated to a version with Knox which started with mj9 for the i605.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
booting up on MJ9... nicely done.
so ill check out saferoot as you said, and then edit the APN
Moridin68 said:
booting up on MJ9... nicely done.
so ill check out saferoot as you said, and then edit the APN
Click to expand...
Click to collapse
Glad it worked.
Sent from my SCH-I605 using XDA Premium 4 mobile app
BluGuy said:
Sorry it took so long to get back to you. I don't know a lot about root66 so I can't help you much there, but I do know that while in download mode if it says something about Knox warranty then the bootloader had been updated to a version with Knox which started with mj9 for the i605.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
so now i have stock recovery menu and download menu and it boots and then hangs at the white verizon screen... i have already done a factory reset, and it still hangs.