I get an error with the viper 1.0.3 rom. Sometimes when i open file explorer the program stops and quit the app. When i open it after that it works oke. I rooted my phone yesterday and put the viper rom + viper repacked kernel on my phone by doing the following steps.
- unlock bootloader and root the phone with the all in one toolkit
-make a twrp recovery with the all in one toolkit.
- make a backup in recovery mode
-install rom in recovery mode
-wipe cache partition in recovery mode
- boot phone and follow the setup wizard
-the phone rebooted a couple of times by itself.
-reboot phone in fastboot and flashed the viper repacked kernel with kernal flasher.
did i do something wrong and how can i fix it/ should i do it?
Was it because i did not Wipe Cache, Dalvik, Factory Reset?
Reflashed the rom again.
Before flashing i wiped the cache partion, wiped dalvik cache and factory reset (user data)
I still get the force close with file explorer
Somebody can help me out? (I can not post in to the viper custom rom topic)
Don´t know why you can´t post in the thread there. But you have to use the special Viper TWRP Recovery in the newest version. Look in the thread, there it´s written.
Neo XL said:
Don´t know why you can´t post in the thread there. But you have to use the special Viper TWRP Recovery in the newest version. Look in the thread, there it´s written.
Click to expand...
Click to collapse
Oké thanks. Does it really make much difference? Can I just flash the venom recovery with the venom kernel flasher? And after that flash the kernel again? I have now installed a lot of apps and installed nova launcher and created custom icons. Is it possible to save that and my settings of viper?
Related
I finally managed to root my TBOLT with easy root, the latest version he put out last night. I made it through step 3 which just said congrats you have rooted, or w.e then it says flash clock world and i get "error occurred while attempting to run privative commands" any help for this?
In rom manager you have to check delete cache, then install latest version of CWM.
http://forum.xda-developers.com/showthread.php?t=1002667
pmazz850 said:
In rom manager you have to check delete cache, then install latest version of CWM.
http://forum.xda-developers.com/showthread.php?t=1002667
Click to expand...
Click to collapse
Thanks!
I guess the way to Flash a ROM is to place a Custome ROM in the SD Card and Use ROM Manager to Reboot into Recovery and Flash with Clockwork Recovery?
Or Can I select Install ROM from SD Card option in ROM Manager.....?
oneders65 said:
Thanks!
I guess the way to Flash a ROM is to place a Custome ROM in the SD Card and Use ROM Manager to Reboot into Recovery and Flash with Clockwork Recovery?
Or Can I select Install ROM from SD Card option in ROM Manager.....?
Click to expand...
Click to collapse
you can do either. I prefer to just boot into recovery, so I can wipe data/factory twice, and wipe cache, and delvik cache twice. then flash a new rom.
the second way you mentioned is more automated, but I don't feel is a thorough.
I tried all the steps but sometimes it just takes a simple reboot.
I rooted my device using Gingerbreak.
I have 2.2.2 installed out of the box. I installed CWM. I installed busybox.
Busybox failed. I tried all the versions that it contains.
I checked root status, and RootCheckBasic says I'm rooted.
I installed Flash ClockworkMod Recovery. It will not reboot to CWM.
It only reboots to the standard Android recovery.
I'm trying to install Bumblebee ROM 2.4.
Here are some things I am having issues understanding with it...
Backup current apps and their data with Titanium Backup (available in the Market). Is this required? The phone is new. I have nothing to back up.
Do a nandroid backup in recovery before doing anything else below.
And the nandroid backup is done with CWM? Again CWM won't reboot, only the standard Android recovery boots.
Required if installing BB 2.x for the first time: Wipe. Wipe it all. Data, cache, system, dalvik-cache, sd-ext if you've got it (might need to look under Advanced or Mounts in recovery to do the last two, and while you're there format /system). I assume you wipe it all with CWM while in recovery?
If upgrading from BB 2.3, wipe cache (and only cache) in recovery.
Does not apply to me
If not upgrading from 2.3, install Wiper zip (see below), just to be extra sure that all is wiped. Don't reboot yet. Installing wiper.zip is done by sideloading using adb commands?
Install ROM zip (see below).
I assume this too is done by copying the zip to the external SD, then selecting update from SD card in recovery... right?
Please someone shed some light on this for me.
In standard Android recovery it says e3. I know on my Captivate I had to use Odin to install GB loaders to get it to work.
THANKS!
Flashwork mod recovery? Never heard of it.
Try downloading rom manager from the market and use that.
Everything else should be simple
tvall said:
Flashwork mod recovery? Never heard of it.
Try downloading rom manager from the market and use that.
Everything else should be simple
Click to expand...
Click to collapse
Flash ClockworkMod Recovery
It's in rom manager.
Which I installed from the market.
But I don't get the CWM recovery when I reboot into recovery mode.
I get the standard Android recovery
-you know... the one that just has "install update.zip"
bulltproof said:
Flash ClockworkMod Recovery
It's in rom manager.
Which I installed from the market.
But I don't get the CWM recovery when I reboot into recovery mode.
I get the standard Android recovery
-you know... the one that just has "install update.zip"
Click to expand...
Click to collapse
Oh, okay, um... are you using the reboot into recovery option in rom manager right after flashing?
After flashing what?
I reboot into recovery through rom manager and get:
Android system recovery <3e>
reboot system now
apply sdcard: update.zip
wipe data/factory reset
wipe cache partition
_________________________________________________________
Android System recovery...
Do not pull out the battery!!
After hitting flash clockworkmod recovery, immediately hit reboot recovery
After hitting anything in CWM it did nothing more than reboot into the standard android recovery.
This phone has 2.2.2 on it. Problem? Probably.
I followed instructions at androidcentral and got it to work.
Needed Xionia_CWMA_12518.6_VM
Installed BACKside-IHO-VM670-11222011
using Xionia_CWMA_12518.6_VM_Recovery-signed
Had a little problem today and needed to activate the phone. BUUUUT......
the rom didn't allow activation.
So I installed Bumblebee. No go.
Then I tried [rom] basic stock rom.
Neither of these will let my phone boot. It gets stuck at boot.
Nothing happens.
I can still boot into Xiona_CWMA. But no roms will work.
PLEASE HELP!!!!
Dude i m noob, and i m facing same problem,
I did root with super one click soc, and it is rooted and i am using root needed apps,
But when i m trying to clobk work recovery (i did flashing CWR from rom manager and aft that i select boot from cwr option from rom manager) it just factory reset i did this 3time all time just factory reset, then i again did but while rebooting i click home button so it gave me same option which came to above member said some e3............
And i try to select any option from it with menu button it was not applied, and no use so i removed battry and place again and start then device started dont know more what to do, help
Sent from my LG-P500 using Android-HQ App
Ok, so I CAN load different recoveries.
They work, or at least seem to.
I can flash roms, but nothing happens (bootloop) or the phone comes on and works with a black screen.
I can call my number and can hear the call, but can't see anything.
Bullet if u found solution pls tell me too
Sent from my LG-P500 using Android-HQ App
bulltproof said:
Ok, so I CAN load different recoveries.
They work, or at least seem to.
I can flash roms, but nothing happens (bootloop) or the phone comes on and works with a black screen.
I can call my number and can hear the call, but can't see anything.
Click to expand...
Click to collapse
I believe that may be due to the newer display in your phone (I'm new to this device so I dont know much yet). From the little bit of information I've gathered, devices manufactured recently have a different display that requires a kernel that supports it. In the iho roms this is included, on others you'll need to flash a kernel right after the rom.
For the stock rom I can upload what I use if you need it. Its basically the one posted here just with the boot.img swapped with one from a nandroid backup I made before switching roms
I think you're spot on with that idea.
I loaded CM7 variant, and it worked.
My question is, how do I get another ROM on it if it has the newer screen?
I loaded different kernels that were supposed to fix it, but no go.
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
umesh840 said:
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
Click to expand...
Click to collapse
Which rom did you try to flash and on which firmware were you on? Also what wipes did you do in CWM?
i tried pureness,windows droid and x-gamer with rage kernel.
and steps followed in cwm is as follows
1. wipe data
2. wipe cache partition
3. dalvic cache
then i installed the zip and rebooted
i also tried the above steps with wipe battery status too
umesh840 said:
i tried pureness,windows droid and x-gamer with rage kernel.
and steps followed in cwm is as follows
1. wipe data
2. wipe cache partition
3. dalvic cache
then i installed the zip and rebooted
i also tried the above steps with wipe battery status too
Click to expand...
Click to collapse
Did you wipe /system also? Its better to select "factory reset" in recovery.
Also try using a different kernel also.
umesh840 said:
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
Click to expand...
Click to collapse
you have unlocked your bootloader as well....right??
1. wipe data
2. wipe cache partition
3. dalvic cache
then i installed the zip and rebooted
---------- Post added at 01:58 PM ---------- Previous post was at 01:52 PM ----------
Did you wipe /system also? Its better to select "factory reset" in recovery.
Also try using a different kernel also.
2
umesh840 said:
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
Click to expand...
Click to collapse
2 suggestions
1. try another recovery if u prefer cwm install another version
2.format
/system
/data
/cache
see what happens then
i dont know any other recovery..
can u suggest a post in xda?
i tried another version of cwm too.
umesh840 said:
i dont know any other recovery..
can u suggest a post in xda?
i tried another version of cwm too.
Click to expand...
Click to collapse
I think Everything will work fine..
Just follow these steps...
In CWM Recovery
Go to Mounts & storage > Wipe cache , wipe data & wipe System
Then Go to Advanced > Wipe Dalvik-cache
and now install your Rom from Sd card
I hope this 'll work..:good:
Hi there!
I've recently flashed xpirt's unofficial port of MIUI v5. However, I'm not seeing any MIUI elements in my phone except 2 apps (which do not work). They are MiCloud and MiCredits. Other than those apps, my phone is pretty much a sensed based phone after flashing the phone.
Each time the phone boots up, a pop up will appear saying : Unfortunately, Xiaomi service framework has stopped. Same thing happens when i try to start the two related apps.
My order of flashing
Format /data
Format /cache
Format /system
Format /delvikcache
flash xpirt miui v5 #1
(at this point I repeated steps 1,2 & 4 after multiple failed attempts to get my miui working)
flash xpirt miui v5 #2
reboot
Did i flash it wrongly?
I have a working CWM recovery already.
Any help is appreciated!! My phone is in working condition even without the miui theme, but meh, wouldn't i just return to the stock rom?
Did a lot of work just to get my JB version on DX too! :crying:
Android 4.1.1
Hboot 1.25
fulmix.Kernel #2
Tried searching for any similar issues faced but seems like I'm the only one facing the issue.
Not even sure if it's supposed to be how it is... not enough screenshots around from other users to show what I should see upon starting up.
You have a wrong CWM recovery for JB hboot.
Use TWRP recovery for JB
Thanks!
ckpv5 said:
You have a wrong CWM recovery for JB hboot.
Use TWRP recovery for JB
Click to expand...
Click to collapse
Wow, that works for me! Thanks! :good::good:
I have the exact same problem
Hboot 1.25
unlocked with WinDroid HTC Desire X Toolkit v3.0
tried flashing the rom with the included TWRP and CWM.
phone boots, i get the error "xiaomi framework stopped" and the two mentioned apps.
flash order like aarontanws
do i need superuser before i flash the rom?
any other suggestions?
cheers
I'm not sure if the Windroid Tool checks your hboot and matches the right TWRP version. I for myself use TWRP 2.6.3.0 on JB hboot, works perfectly for me. You can also use PhilZ Touch if you want, but be sure to choose the JB version. Given that, flash the recoveries manually via fastboot, perform a full wipe, install the first package along with the second one.
TWRP 2.6.3.0 here.
I get an Error when I try wiping the dalvik cache.
flashed TWRP 2.5.0.0 via command line
no Error wiping dalvik + flashes MIUI successfully
fleischverpackung said:
TWRP 2.6.3.0 here.
I get an Error when I try wiping the dalvik cache.
flashed TWRP 2.5.0.0 via command line
no Error wiping dalvik + flashes MIUI successfully
Click to expand...
Click to collapse
Best tip I can give you, don't use a toolkit. Do everything manually
Hi, newbie here. I have trouble with wifi. My phone is Xperia P
I installed aospa rom, at the beginning everything was fine but few hours later I couldnt turn wifi on. I didint know what to do, so I just factory reset the phone. Same thing happened.
Then I installed Blur Line (CM 11) rom, same thing happened again.
On advanced setting it says Mac adress unavailable (idk if this is related with problem)
I searched google and xda for possible solutions.
solution 1 is installing sqlite editor and changing "wifi_display_on" value to 0
this didnt work because it was already 0
solution 2: settings/wi-fi/advanced/wi-fi region code
this didnt work too. I select Turkey (I live in Turkey) but whenever I exit settings and turn back none of the region is selected.
solution 3: copy WCNSS_qcom_wlan_factory_nv.bin file to somewhere
it is on motorola atrix hd thread, so idk if this can work for my phone too. I downloaded it but havent tried yet
Do you think it can work for my phone, or is there any "wifi fix file" for Xperia P
What sould I do now? Should I install another rom (slimkat, pacman, miui v5) or is there any solution for fixing wifi?
Thanks for replies.
Describe the steps you followed to install the ROM.
hliasant said:
Describe the steps you followed to install the ROM.
Click to expand...
Click to collapse
My phone was on stock rom, rooted and cwm installed.
First I unlock bootloader via flashtool, then I flash the boot.img via flashtool
I flash the rom and gapps with cwm (wipe cache, dalvik, factory reset) but then I flash the rom with twrp (wipe data, cache etc) again.
i dont know if I wipe some important data
formerly I installed some stock base roms via cwm, and I didnt wipe anything extra this time
I backuped TA partition before unlock bootloader. Is wifi work if I relock bootloader and flash stock rom & kernel
Fenomenon said:
My phone was on stock rom, rooted and cwm installed.
First I unlock bootloader via flashtool, then I flash the boot.img via flashtool
I flash the rom and gapps with cwm (wipe cache, dalvik, factory reset) but then I flash the rom with twrp (wipe data, cache etc) again.
i dont know if I wipe some important data
formerly I installed some stock base roms via cwm, and I didnt wipe anything extra this time
I backuped TA partition before unlock bootloader. Is wifi work if I relock bootloader and flash stock rom & kernel
Click to expand...
Click to collapse
Seems like some kernel modules are missing.
This is a sure method-procedure that I follow for flashing a new ROM on my and on my friends' XP.
1)flash stock JB firmware(ftf) using flashtool.
2)flash boot.img from the ROM you want to flash, using flashtool.
3)reboot in twrp using power button during boot up.
4)wipe data, cache, dalvik.
5)flash ROM + gapps and reboot.
hliasant said:
Seems like some kernel modules are missing.
This is a sure method-procedure that I follow for flashing a new ROM on my and on my friends' XP.
1)flash stock JB firmware(ftf) using flashtool.
2)flash boot.img from the ROM you want to flash, using flashtool.
3)reboot in twrp using power button during boot up.
4)wipe data, cache, dalvik.
5)flash ROM + gapps and reboot.
Click to expand...
Click to collapse
thanks for help :good:
I install slimkat 8.8 and wifi works fine atm :laugh: