Here is a custom kernel based on the latest GT-N7100 sources for the Note 2. I've taken a lot of stuff out, so if you like playing around with changing 500 things on the kernel before you start using your phone, look somewhere else. It pulls in Beoffla Sound and Simple IO Scheduler and removes as much debugging stuff as possible, non-default CPU and IO schedulers, and Ext2 Support (Ext4 handles Ext2/3). I've also gotten rid of recovery over-write on boot and enabled adb root by default.
There is no overclocking support, overclocking is useless unless you're pumping up your e-peen. There is no undervolting support as it hasn't been shown to do anything useful on multi-core systems from everything I've seen. There is no init.d support as 90% of the init.d scripts are useless. It will continue using stock boot animations as well, though I'm sure it wouldn't be to difficult to make stock android boot animations work. That may even be possible without any kernel changes anyway.
The only issue I've run into is that exFAT SDcards may not work with it. I've been trying to figure out why, but it is slow going when I don't have an exFAT card to test with. If anyone would like to help fix it, flash and get me full dmesg and logcats. If you don't know how to get those, but still want to help, see my SDK Guide for a general overview of what to do.
This kernel is built for TouchWiz ROMs, and should work on any available VZW ROM currently available. It works for VRALJB, VRALL4, and VRAMC3 from my own testing, let me know if you have issues on a TW ROM and I may be able to fix it. For a download, see below. I also am not posting in original development because IMO, that entire forum is useless and confusing.
[size=+2]Change log[/size]
0218
Initial Release
0304
XZ Compression
No worrying about exFAT (for now)
Attempt to get rid of hot boots or full reboots that some people experience.
0330
Drop Voodoo Sound, go to Boeffla Sound
Increased SD Card read ahead for better performance
Enabled Car Dock Charger support
0404
Actually enable the car dock charging support this time
Try and fix the lockups after long (>2 day) uptimes
0408
Insignificant Config Change
Build for many new models
0418
Color Control
0419
Make it so STweaks works, so you can use the new color controls
0519
Update sources and ramdisk
0726
exFAT support
[size=+2]Known Issues[/size]
My Bank Account Balance
XDA:DevDB Information
PeanutButta Jelly, a Kernel for the Verizon Samsung Galaxy Note II
Contributors
imnuts, Samsung
Kernel Special Features: Bare Bones, No Frills, Set it and Forget it
Version Information
Status: Stable
Stable Release Date: 2013-07-26
Created 2013-07-30
Last Updated 2013-07-30
[size=+2]FAQ[/size]
I get a "Status 7" error when trying to install, WTF?
Update your recovery. TWRP that is flashed via the unlock method does not process asserts properly (it was compiled for a different Note 2 model). This is meant to keep people from flashing this to the wrong device.
My exFAT SDcard isn't working
See the OP, I need info to get exFAT to work properly. Until then, format your SDCard to FAT32
Where are all the options?
You can't read, I already said there are none. This is flash and forget it.
This is the best thing since sliced bread, can I make it rain?
Click the DONATE TO ME button to the left, or click here, it's appreciated, but not expected. Clicking thanks on the posts also works.
This thing is worse than Tub Girl, how do I go back to what I had before?
Just reflash your old kernel. If you were on stock before, I've posted the stock kernels at the end of this post.
I'm having a problem, FIX IT NAO!!!1!
Send me both the output from dmesg and logcat as well as details of what you do when you see the problem. Otherwise, the source is linked to below, fix it yourself.
Can we get XYZ feature added?
Link to it, and I'll think about it.
[size=+2]Download[/size]
0726 Build
0519 Build
0419 Build
0408 Build
0404 Build
0330 Build
0304 Build
Original Release
[size=+1]Downloads for Other Carriers[/size]
AT&T Note 2 (SGH-I317)
International Note 2 (GT-N7100)
International Note 2 LTE (GT-N7105)
Sprint Note 2 (SPH-L900)
T-Mobile Note 2 (SGH-T889)
US Cellular Note 2 (SCH-R950)
[size=+2]Source[/size]
Github
[size=+2]Stock Kernels[/size]
VRALJB
VRALL4
VRAMC3
Re: [KERNEL][TW][2-18-13]PeanutButta Jelly
Dude no lie...I was thinking to myself last night that I wish this kernel was available for our phone. Your kernel for the GNex was the best thing to have been on my GNEX. Downloading then flashing immediately. Thanks imnuts
Sent from my SCH-I605 using Tapatalk 2
Re: [KERNEL][TW][2-18-13]PeanutButta Jelly
I'm on stock deodex vrll4 and flashing this right now. I trust your work. Finally someone who agrees that overclocking is useless.
Sent from my SCH-I605 using Tapatalk 2
Re: [KERNEL][TW][2-18-13]PeanutButta Jelly
Downloading now
Re: [KERNEL][TW][2-18-13]PeanutButta Jelly
Flashed fine. Charging to 100% then ill report back once I drain it. Feels nice and smooth though. Better then straight stock from what I see thus far
Sent from my SCH-I605 using Tapatalk 2
Re: [KERNEL][TW][2-18-13]PeanutButta Jelly
Yes! Peanut Butter jelly time. ... I've missed this since the charge days!
Sent from my SCH-I605 using Tapatalk 2
Creamy, not chunky. Aw yeah.
Like a boss.
imnuts said:
Here is a custom kernel based on the latest GT-N7100 sources for the Note 2. I've taken a lot of stuff out, so if you like playing around with changing 500 things on the kernel before you start using your phone, look somewhere else. It pulls in Voodoo Sound, Simple IO Scheduler, and Joe's Tiny RCU. I've also gotten rid of recovery over-write on boot and enabled adb root by default. It removes as much debugging stuff as possible, non-default CPU and IO schedulers, and Ext2 Support (Ext4 handles Ext2/3).
There is no overclocking support, overclocking is useless unless you're pumping up your e-peen. There is no undervolting support as it hasn't been shown to do anything useful on multi-core systems from everything I've seen. There is no init.d support as 90% of the init.d scripts are useless. It will continue using stock boot animations as well, though I'm sure it wouldn't be to difficult to make stock android boot animations work. That may even be possible without any kernel changes anyway.
The only issue I've run into is that exFAT SDcards may not work with it. I've been trying to figure out why, but it is slow going when I don't have an exFAT card to test with. If anyone would like to help fix it, flash and get me full dmesg and logcats. If you don't know how to get those, but still want to help, see my SDK Guide for a general overview of what to do.
This kernel is built for TouchWiz ROMs, and should work on any available VZW ROM currently available. It works for both VRALJB and VRALL4 from my own testing, let me know if you have issues on a TW ROM and I may be able to fix it. For a download, see below. I also am not posting in original development because IMO, that entire forum is useless and confusing.
Click to expand...
Click to collapse
looks pretty good would u mind if i modify the ramdisk and add init.d/bootanim support and have it as an option in my rom?
beanstown106 said:
looks pretty good would u mind if i modify the ramdisk and add init.d/bootanim support and have it as an option in my rom?
Click to expand...
Click to collapse
Go for it
After flashing I no longer have haptic feedback? I checked my settings and it's enabled yet nothing happens.
Re: [KERNEL][TW][2-18-13]PeanutButta Jelly
JetBlue said:
After flashing I no longer have haptic feedback? I checked my settings and it's enabled yet nothing happens.
Click to expand...
Click to collapse
Did you wipe cache abs dalvik cache and fix permission? My hepatic is working great oh and by I missed voodoo. ... my funk station sounds amazing
Sent from my SCH-I605 using Tapatalk 2
Hopefully this isn't a sore subject, but will this work fine on the Jedi ROM which is built on an international base?
WizeGuyDezignz said:
Hopefully this isn't a sore subject, but will this work fine on the Jedi ROM which is built on an international base?
Click to expand...
Click to collapse
I would think that it should work on any 4.1.x TW ROM, but I haven't tested it out. Do you know what kernel is used on that ROM?
Re: [KERNEL][TW][2-18-13]PeanutButta Jelly
imnuts said:
I would think that it should work on any 4.1.x TW ROM, but I haven't tested it out. Do you know what kernel is used on that ROM?
Click to expand...
Click to collapse
He uses his saber kernel which is built off the International as well
Sent from my SCH-I605 using Tapatalk 2
kintwofan said:
He uses his saber kernel which is built off the International as well
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Well, this is built off of the N7100 sources, so I would think it would work.
imnuts said:
Go for it
Click to expand...
Click to collapse
thanks bud
Re: [KERNEL][TW][2-18-13]PeanutButta Jelly
Why I keep getting failed when I try install this kernel with twrp? I downloaded the kernel twice, and still same error
Sent from my SCH-I605 using xda app-developers app
Re: [KERNEL][TW][2-18-13]PeanutButta Jelly
evolishesh said:
Why I keep getting failed when I try install this kernel with twrp? I downloaded the kernel twice, and still same error
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
I bet it says status 7. If You read the OP it says you need to update your recovery.
Sent from my SCH-I605 using Tapatalk 2
Re: [KERNEL][TW][2-18-13]PeanutButta Jelly
kintwofan said:
I bet it says status 7. If You read the OP it says you need to update your recovery.
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
In have the latest twrp. Well I think! Let me update. Thanks
Sent from my SCH-I605 using xda app-developers app
Related
UPDATED: added version 1.14 to this post (and pushed it to Play Store as well)
please let me know if it works good (doesn't reboot) when applying settings on stock rooted kernel.
Hi!
I'm trying to make my app TouchScreenTune to work on default kernel on ATT version of Galaxy Note. But since I don't have it myself (I have European Note), I obviously need some feedback from people with I717
This is for GingerBread kernel (however in the case on N7000 it works on ICS as well)
Could you please check if ToouchScreenTune test version attached to this post works with your rooted kernel? Especially I'm interested if it works with stock kernel. Just try to adjust SPen position to some extreme offset - you will immediately see it when pressing screen with SPen.
Thanks.
P.S. Description of the app from the Market after the break
----------
Market link: https://play.google.com/store/apps/details?id=com.vital.tst.n7000&hl=en
*Requires Root*
*Currently supports Samsung Galaxy Note (tested on N7000), Galaxy S2*
*THIS IS TRIAL VERSION!!! FULL VERSION REQUIRES REGISTRATION AND IS PAID*
NorthAmerican/AT&T Note users - see comment regarding kernel below!!!!
TouchScreenTune application allows you to fine-tune settings of phone's touchscreen and calibrate Pen cursor position for every screen orientation (portrait/landscape...). (S-pen calibration obviously works only for Note)
It allows to dramatically improve responsiveness and sensitivity of touchscreen.
If you are using screen protector on your phone, the application will allow to raise screen sensitivity, so there will be no responsiveness impact from using screen protector.
This application allows you to calibrate amount of touch movement, when actual reporting of scrolling starts. That allows more smooth feeling of the interaction with the touch screen.
Without this application you cannot precisely draw or click small items with Pen because it reports position incorrectly - few millimeters away from the actual touch point. But this application allows you to precisely calibrate position of Pen touch on the screen. (Galaxy Note only)
Some common problems:
When first starting there should be popup from SuperUser application with request to get Root access. Some people say that sometimes it doesn't appear. In that case try starting the SU program first, and then this application.
This application supports standard Samsung firmwares - with custom kernels it may not work (however I have successfully tested it with some custom kernels)
Custom kernels: app requires kernel with KALLSYMS, so ask developer of your kernel to include this in his config when building kernel: CONFIG_KALLSYMS=y, CONFIG_KALLSYMS_ALL=y
Known issues: if when first starting application it seems to be not responding, and dialog asking to force close app comes - choose wait. This should happen only on first run.
Hi- I read sonewhere TST does not work with the stock att kernel. You need to root and flash a kernel that supports it from the development section.
Sent from my SAMSUNG-SGH-I717 using xda premium
I have the paid version and run rooted with custom kernel and can't get it to work
Sent from my note running a jelly bean key lime pie hybrid OS
It does not appear to change anything. I set the x and y offsets to 300 each and the target did not change position relative to the pen placement.
bendotson said:
Hi- I read sonewhere TST does not work with the stock att kernel. You need to root and flash a kernel that supports it from the development section.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
That's why I'm posting this test version here - I want to make it work
I have compiled it to work with kernel sources that were published by Samsung.
lactardjosh said:
It does not appear to change anything. I set the x and y offsets to 300 each and the target did not change position relative to the pen placement.
Click to expand...
Click to collapse
That is with stock kernel? Are you rooted? Have you seen any error message when you changed values and hit Apply?
vitalij said:
That is with stock kernel? Are you rooted? Have you seen any error message when you changed values and hit Apply?
Click to expand...
Click to collapse
My apologies...I should have been more specific about my set up.
I'm using a custom ROM based off the leaked ICS 4.0.3 firmware. I'm rooted with SuperSU, but the kernel is stock since we don't have source for the ICS kernel yet.
I do get an error message
ERROR: Can't read SPEN settings? No ROOT Permissions? Unsupported firmware?
Click to expand...
Click to collapse
Is this for GB or ICS?
lactardjosh said:
My apologies...I should have been more specific about my set up.
I'm using a custom ROM based off the leaked ICS 4.0.3 firmware. I'm rooted with SuperSU, but the kernel is stock since we don't have source for the ICS kernel yet.
I do get an error message
Is this for GB or ICS?
Click to expand...
Click to collapse
This is compiled for GB, however in the case of N7000 it works on leaked version of ICS as well. However judging from your error - either ICS leak lacks Kallsyms support or driver is much changed compared to GB version.
I have also uploaded one more test version - which possibly may work better.
vitalij said:
This is compiled for GB, however in the case of N7000 it works on leaked version of ICS as well. However judging from your error - either ICS leak lacks Kallsyms support or driver is much changed compared to GB version.
I have also uploaded one more test version - which possibly may work better.
Click to expand...
Click to collapse
Parsing error when trying to install the new version.
Stock GB kernel does not have KALLSYMS. It was added for some custom kernels, though.
My guess is that ICS does not have this either.
lactardjosh said:
Parsing error when trying to install the new version.
Stock GB kernel does not have KALLSYMS. It was added for some custom kernels, though.
My guess is that ICS does not have this either.
Click to expand...
Click to collapse
Uploaded new version again - now it seems to be OK.
Regarding Kallsyms - stock actually should have it - at least according to kernel sources published by Samsung, and also some people reports. So it would be really nice if somebody with stock kernel could test it.
vitalij said:
Uploaded new version again - now it seems to be OK.
Regarding Kallsyms - stock actually should have it - at least according to kernel sources published by Samsung, and also some people reports. So it would be really nice if somebody with stock kernel could test it.
Click to expand...
Click to collapse
Same error with 1.13 on ICS
ERROR: Can't read SPEN settings? No ROOT Permissions? Unsupported firmware?
Click to expand...
Click to collapse
I bought the app from you off the market.
It did work on the holo kernel.
However, on Seraphim ICS build it doesn't.
I actually uninstalled the program.
The spen is off by 1 square in s-memo. Not too bad.
ICS is much better about the sensitivity and tracking
I had them set to 0 and 25 as recommended but like I said that was too much so I just uninstalled.
does not work on un-rooted, stock att ...
Good to see you hear, i loved using this on GB.
Running ICS from the collective, it loads up but won't apply any requested changes.
May have to wait till the kernel is released and KALLSYMS is added in.
Hi vitalij,
I am running a rooted but otherwise totally stock at&t galaxy note. I tested the application but couldn't notice a difference with the spen settings, even moving them to the extremes.
I tested the application in the marketplace as well. It would open and let me adjust the settings (again, didn't notice a difference) but when I applied the changes my device would reset. I upgraded to the full version and the same thing happened. When I redownloaded the test version the reboot fixed itself, but the settings still don't make a difference on the pen.
Hope this helps!
Sent from my SAMSUNG-SGH-I717 using xda premium
I tested your second version and is working...what i did Ok from what I'm seeing I uninstalled super su and installed superuser in market,,the newest update allowed a superuser prompt..which I allowed.(.I hit back and the setting don't stick,if I hit home they do when I ..and go back in the values stick))..and is super responsive holy sh!t...I can't even type its so fast..lmao..gotta work with these settings.,am running gb unofficial rom on da_gv2 overclock kernel,...dev you have something good going here ...good luck with progress this app will be incredible
Captured screenshot..wont allow me to post...with su command..damn..
Su
Thanks Wish! Backing out with the home button instead of the back button fixed the app for me. Awesome app vitalij!
Sent from my SAMSUNG-SGH-I717 using xda premium
Are you on GB or ics?
WANTED: Users to port SGS roms to the 4.0. You will need to know how to complete a full restore if something goes wrong, but that's it. I cannot go through the forums searching for good SGS roms, as I have several threads to manage, and a rom to work on. The steps are easy for you though, and if you port a rom I will add it in the OP.
First of all, I want to say that I take NO credit on any of these roms. All I did was port them over and add speed tweaks, or added ones that users have ported. If the rom creators or mods have any issue whatsoever with this thread, I will happily take it down, even though I think it would be a large contribution to the 4.0 community. I will continue to update this forum with info as I go along.
I, after a fortunate afternoon of boredom, have managed to successfully begin porting I9000 roms to our devices! Fortunately, they are similar enough that it boots without any modifications. I will put up here any ports that I make, and any that the users create. Note that these WILL NOT BE UPDATED! These are one-time ports, to be used and improved upon by the community. Anything that is broken now will stay broken, unless a user decides to fix/update it, then I will include it in the OP.
What *should* work in all ported roms:
wifi
GPS
home buttons
everything else
What will probably *not* work on ported roms:
Bluetooth
Camera
backlight on buttons
Ported roms:
~GamerzRom odexed V11-~
Link to original thread: http://forum.xda-developers.com/showthread.php?t=1656081
Added:
V6 supercharger, and build.prop tweaks from it.
init.d tweaks from my rom
ext4 filesystem
Advanced mount options
Auto zipalign and Database optimize
Removed apps that do not work on our Player (such as the Dialer)
Download:http://www.mediafire.com/download.php?ctuu2w295w2xlk6
~Saurom~
Original thread:http://forum.xda-developers.com/showthread.php?t=1388342
Ported download link:http://www.mediafire.com/download.php?csua40hkg1r3m86
~JellyBeanRom~
Original thread: http://forum.xda-developers.com/showthread.php?t=1260709&highlight=gb
Ported download link:http://www.mediafire.com/download.php?mgec81f3ifck221
~Ario Rom (ported by ChaosChris)~
Ported thread link : http://forum.xda-developers.com/showthread.php?p=29950015#post29950015
Original thread: http://forum.xda-developers.com/showthread.php?t=1536558
To use these Roms:
You MUST use a Gplayer kernel! GT-I9000 kernels will not boot!
A full wipe may be necessary with some roms if you encounter issues.
Converting (for porters)
Steps:
1. Download wanted rom (must be GB)
2.Move the zip to the internal sdcard
3.Reboot into recovery
4.Flash zip, then boot into download mode
5.Flash a SGP kernel
6. apply my mod pack to the rom, by either copying/pasting the system directory over the SGS rom's system directory, or by pushing it via adb, (eg. adb push /path/to/modpack /system).
7. Profit!
NOTE: after applying this, porters may want to remove non-working packages such as the dialer and mms, as they may cause issues with the end result if they are kept in. Do not delete phone.apk though!! This is required for the camera and some other things, and breaks stuff on certain roms. You have been warned.
NOTE: If you use this modpack, please give me credit, and link back to this thread so that more people can use it. Also, you should probably link back to the ported rom's thread as well, to avoid "ripping off" those devs.
Modpack:
Changelog
V1-
Preliminary release
Fixes wifi and GPS
Includes v6 supercharger and init.d tweaks
V2-
fixed vold.fstab so sdcard is mounted properly.
Download:
ModpackV1:
http://www.mediafire.com/download.php?diaq6im4i18ktf7
NOTE:Note that this is preliminary. It fixes everything listed, and attempts to fix some broken things. Your mileage may vary. This is not a cwm flashable zip! you much extract and adb push this over the existing system directory. This is mainly intended for porters, so users apply at your own risk. This will work, but is a very early release.
Modpack V2 (thanks to ChaosChris):
https://docs.google.com/open?id=0B9OVlH2Pl76DZk5Pa3lJVXlrYzA
Looking good! Does the gamerz port have the 388mb of ram, I thought that was kernal related?
Sent using Tapatalk
iJimaniac said:
Looking good! Does the gamerz port have the 388mb of ram, I thought that was kernal related?
Sent using Tapatalk
Click to expand...
Click to collapse
Yeah, it says that because it includes semaphore's kernel, which raises the max rom to 380, which we could do on our kernel's, but apparently that breaks a lot of stuff if you go much further then 350 (according to klin).
is the wifi fixed in your port or do we have to do your fix after flashing?
Just a word of advice, make sure you get permission from the devs! Also surely this will work with ICS roms right? Just swap out the SGS kernel with the SGP CM7 kernel and it should work (I think)
Sent by my Robot Butler
Supermaster34 said:
Just a word of advice, make sure you get permission from the devs! Also surely this will work with ICS roms right? Just swap out the SGS kernel with the SGP CM7 kernel and it should work (I think)
Sent by my Robot Butler
Click to expand...
Click to collapse
check over in the operation: ics for the 4.0 thread I believe they are already attemping to use the cm7 kernel to boot a cm9.
daniel644 said:
is the wifi fixed in your port or do we have to do your fix after flashing?
Click to expand...
Click to collapse
Yeah, it is fixed before you flash. Once I manage to iron out a few more bugs, I will probably release a "conversion pack" that fixes all the issues. I already have one that fixes wifi and gps, but bluetooth and camera have me stumped, and I do not want to replace the entire hw/lib folder, because some of these roms have lib optimizations, but I may have to.
Sent from my GT-I9000 using xda app-developers app
Supermaster34 said:
Just a word of advice, make sure you get permission from the devs! Also surely this will work with ICS roms right? Just swap out the SGS kernel with the SGP CM7 kernel and it should work (I think)
Sent by my Robot Butler
Click to expand...
Click to collapse
Since I am merely redistributing their work, not incorporaring it into anything I have made, or taking any credit for it, I don't asking permission is necessary. I may be completely off base, but I think that as long as you give devs 100% credit, and link to their original work, it is okay. It may not be the best option, but neither is asking EVERY dev if I can port their rom, or ask permission for user-ported roms.
Youay have an idea there, althouh I think that zaclimon has tried it, and he said it wouldn't boot. I have 2 efs backups, so I guess I can try, although even if the kernel boots, I bet I will have to do a LOT more work before it is usable. I also believe that he said the issues may have been rom based, so here it goes, and wish me luck.
Sent from my GT-I9000 using xda app-developers app
hanthesolo said:
Since I am merely redistributing their work, not incorporaring it into anything I have made, or taking any credit for it, I don't asking permission is necessary. I may be completely off base, but I think that as long as you give devs 100% credit, and link to their original work, it is okay. It may not be the best option, but neither is asking EVERY dev if I can port their rom, or ask permission for user-ported roms.
Youay have an idea there, althouh I think that daniel has tried it, abd he said it wouldn't boot. I have 2 efs backups, so I guess I can try, although even if the kernel boots, I bet I will have to do a LOT more work before it is usable.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I've already tried with a cm7 kernel and I got an error of looping (netd1.0 starting) that's why I'm trying to do something. Now I need to backport 3.0.8 usb gadget drivers.
zaclimon said:
I've already tried with a cm7 kernel and I got an error of looping (netd1.0 starting) that's why I'm trying to do something. Now I need to backport 3.0.8 usb gadget drivers.
Click to expand...
Click to collapse
Whoops, I meant you . I will try with a official cm9 build from the SGS forums, and see if that fares any better. Probably will not, but it doesn't hurt to try.
EDIT: well, nevermind about that. He seems to have pulled all of his download links, and I cannot get to the CM7 build. Oh well...
I am going to try anyway with the I9000 package since it seems to have EXT4 support, and I *think* that was what was bootlooping me earlier. This as all just my hopeful rationalization, of course . A lot farther out there, but maybe I can use a SGP5.0 kernel to get it booting. A LOT less likely, but hey, i'm experimenting .
EDIT: I cannot try ICS, since I need to reboot into recovery a second time, and I cannot do that, as I have the intl bootloader on my US device, and it would require it to be booting first.
hanthesolo said:
Whoops, I meant you . I will try with a official cm9 build from the SGS forums, and see if that fares any better. Probably will not, but it doesn't hurt to try.
EDIT: well, nevermind about that. He seems to have pulled all of his download links, and I cannot get to the CM7 build. Oh well...
I am going to try anyway with the I9000 package since it seems to have EXT4 support, and I *think* that was what was bootlooping me earlier. This as all just my hopeful rationalization, of course .
Click to expand...
Click to collapse
I think we should do like entrophy's because I get bored from mtd. Also just tried the gamerz rom port. As I see the camera works, don't know about bluetooth (it can turn on). Vibration works too. I was able to connect to wifi pretty fast and I have one word for this rom. FAST!!!!
Good job!!
zaclimon said:
I think we should do like entrophy's because I get bored from mtd. Also just tried the gamerz rom port. As I see the camera works, don't know about bluetooth (it can turn on). Vibration works too. I was able to connect to wifi pretty fast and I have one word for this rom. FAST!!!!
Good job!!
Click to expand...
Click to collapse
Well, thet camera shows a preview, but fails when a pic is taken, for some reason. Bluetooth does turn on, but is not seen by any other devices, and cannot scan for others either. I did do a little tweaking with Gamerz, so it will be even faster than it was already, which is pretty blazing! I have 2 more that I can put up (I have a preliminary package that I just adb push over the system files that works for now). I have also gotten the camera apk onto my rom, and it works really well! It doesn't take 5 MP pics, or record 720p video (which may be because I am using Terrasilent, which reduces the amount of Vram the system can have), but tap to autofocus and everything else works pretty well. I have a sneaking suspicion that the camera is soft limited, not hard-limited.
I also noted that the external sd card isn't working too (a problem with vold.fstab I'll correct it right now)
zaclimon said:
I also noted that the external sd card isn't working too (a problem with vold.fstab I'll correct it right now)
Click to expand...
Click to collapse
I don't use an externel sdcard, so thanks for pointing that out! I will include a fixed version in my mod pack.
hanthesolo said:
I don't use an externel sdcard, so thanks for pointing that out! I will include a fixed version in my mod pack.
Click to expand...
Click to collapse
Here's the vold.fstab if you need it
Okay, it seems that the zip hosed my partitions (converted them to yaffs2 and mtd), so I am going to perform a full restore, and just keep porting GB roms. As soon as you can get the usb gadget driver working, zaclimon, I guess I can keep working on it, but for now I will just keep to GB.
Two more roms up! I will probably not port any other unless I see an especially good one, but I will put up my mod pack tomorrow.
has anyone found out if the ported roms enable tv out or has someone found out if tv out support is in the i9000 kernal?
TV out has to have hardware, or your not going anywhere. I think the galaxy player lacks the hardware unfortunately. If it does have the hardware, it was very dumb of Samsung not to enable it.
Sent using Tapatalk
iJimaniac said:
TV out has to have hardware, or your not going anywhere. I think the galaxy player lacks the hardware unfortunately. If it does have the hardware, it was very dumb of Samsung not to enable it.
Sent using Tapatalk
Click to expand...
Click to collapse
what hardware does the galaxy s i9000 have that allows for tv out? I thought the galaxy s i9000 and the galaxy player 4.0 had the same gpu?
Hello N7105 owners,
DISCLAIMER:
By reading this post, downloading any of the links, or acting on it in anyway you accept full responsibility for the outcome. I strongly suggest you do not download this ROM but that's just my opinion.
What this is:
This is EE's (UK operator)(formally Orange & T-Mobile) stock ROM for the GT-N7105 or Galaxy Note 2 LTE International - N7105XXXALIJ
Stock Kernel
Rooted
Busybox
Fully deodexed
Zip aligned
Some bloatware removed. (Light version)
What you would need:
Custom recovery (CWM) <-- See other threads for the how-to I might post a link later.
What you would do:
Download .zip
While waiting... it's big (sorry) ... do a nandroid <-- Google it.
Put .zip onto external SD Card (internal would be fine too but I think if you full wiped it'd get deleted and your panties would twist)
Flash .zip
Wait... remember it's big (sorry)
Wipe Cache
Wipe Dalvik Cache
Reboot
Enjoy
What else you would want to do:
Flash a different Kernel - there's only one floating around for now.
Use a storage data swap - two options
Use performance scripts, see around there are lots and they'll work best with a different kernel with init.d support - there is a thread with an how-to for getting support with any kernel/ROM and I tried it but failed. I didn't try hard.
Wipe Data - this shouldn't be necessary as your phone will already be on a stock ROM.
What I would like you to do:
Make themes and I'll link them in post 2
Tell me what default apps you want back or what taken away.
Post links to other stock ROMs you'd like made more convenient (that's all this is btw because it's no different than rooting etc yourself after the fact).
Talk about N7105 development - we all want proper Dev support and built from source roms.
What I don't want you to do:
Expect anything from me.
Flash this thinking it's something special, or that I'm a dev, or think that this is counts as actual development.
Credits:
I'll update this - but in order of significance:
Torvalds
The GPL
Google
Samsung
dsixda
carl1961
Downloads:
0.0.0 - B=Downloads:145 | L=Downloads:20
[Bloated][~800MB] http://www.adrive.com/public/23eMz4/EmptyStock_000.zip This is what I'm running.
MD5: 7bdba61934be6e2ec9b21c2437080aaa
[Light][~600MB] http://www.adrive.com/public/wsYjTa/EmptyStock_000_Light.zip :: Untested - I'm running the bloated version and haven't checked that this one even boots I don't recommend flashing it although that's exactly what I'll do to test it just can't be arsed at the moment - mainly because I'm playing bezomied and I'm on level 24 with 17 shotguns in reverse... anyway the version I'm running will be uploaded in an hour or so.
MD5: 02706989addb4e4f1055114659153d17
Reserved
+1 for luck
EmptyArea said:
+1 for luck
Click to expand...
Click to collapse
:laugh:+1 for luck too.
EmptyArea said:
DISCLAIMER:
By reading this post, downloading any of the links, or acting on it in anyway you accept full responsibility for the outcome. I strongly suggest you do not download this ROM but that's just my opinion.
Click to expand...
Click to collapse
Who's going to defy the OP's advice and flash the ROM?
+1 for first de-bloated n7105 rom
I am going to flash this once I get my note 2.
I almost want to flash in spite of OP....lol
Have a great time anyway.
Shamazo said:
+1 for first de-bloated n7105 rom
I am going to flash this once I get my note 2.
Click to expand...
Click to collapse
Tbh until there's been some discussion about what should be in and what should be out the light version is not recommended. There's literally too many apps and too many Samsung goodies to know whats right to remove.
The once we agree on the best minimum apps for a base, I'll just use that for updates and the other apps can come in a range flashable packages.
For now the recommended way to debloat is just use titanium backup.
Sent from my GT-N7105 using xda app-developers app
Those few who have downloaded the Light version, how is it? Did it boot? I remove anything that needs putting back in? Is there anything still there you would consider bloat?
Is the bloated version deodexed, zip aligned etc?
Yes. The only difference is a number of system apps are removed in the light version.
Sent from my GT-N7105 using xda app-developers app
Great, trying it now. I want to see if the Multiwindow mod (http://forum.xda-developers.com/showthread.php?t=1953705) will work with this. If so it would be great to start having it cooked into later roms. Will feedback later.
Will cirtainly try it but my phone is acting up. It refuces to use 4g, it goes like a jojo between e/g/3g/h and thats when its connected. Most of the dsy its out of service so need to return it.
Sent from my GT-N7105 using xda premium
wrapper said:
Great, trying it now. I want to see if the Multiwindow mod (http://forum.xda-developers.com/showthread.php?t=1953705) will work with this. If so it would be great to start having it cooked into later roms. Will feedback later.
Click to expand...
Click to collapse
ROM is working fine, thanks for this. Multiwindow doesn't work, have informed the developer.
Multiwindow work fine in my Note.
Sent from my GT-N7105 using Tapatalk 2
He's talking about the multiview mod for any app which I'm disappointed to hear doesn't work but its because this is an old version.
But the newest EE version I have found.
I'll find the latest version and rebrand it.
Sent from my GT-N7105 using xda app-developers app
wrapper said:
ROM is working fine, thanks for this. Multiwindow doesn't work, have informed the developer.
Click to expand...
Click to collapse
Use this one n7501 http://forum.xda-developers.com/showthread.php?t=1954547 its works fine on my phone
deeznutz1977 said:
Use this one n7501 http://forum.xda-developers.com/showthread.php?t=1954547 its works fine on my phone
Click to expand...
Click to collapse
Has to be deodex / custom ROMs, right?
http://forum.xda-developers.com/showthread.php?t=1961314
Support 7105 rom
Should have ALJ4 uploaded tomorrow.
Edit:
Dang the re branding broke s note. Can't fix until tomorrow. Probably just need to push a different s note app (has someone optimised that awful app yet?)
It's uploading anyway if it doesn't fail I'll post link but flashing it without at least removing the s note app will result in infinite FCs. It's otherwise untested.
Sent from my GT-N7105 using xda app-developers app
Touchwiz 4.3
This is Stock WITHOUT any added Note3 features
Download Link
R.A.H.TW_4.3_11-27-13-1908.zip - 1.09 GB
First Boot can take a while be patient.
Known TWRP issue ( and possible CWM ) attempting to preform a restore of TW4.3 may cause bootloop
Bugs
WiFi bug (see wifi patch section)
Signal bar does not show accurate signal (if any)
Possible root lost on first boot (see Root section)
WIFI PATCH FIX
Here's how to get Wifi working. Do this after installing the ROM. Thanks to seanzscreams for the fix and stvn1337 for posting the info. What this fix does is adds the paramaters needed for Wifi to work on TouchWiz 4.3 based ROMs while still allowing us to flash to other ROMs outside of the TouchWiz 4.3 stuff. Be forwarded that these steps do need to be followed pretty much dot on especially when it comes to apply the patch. Deviating on that part might cause some major issues including bricking your device. I will not be held liable if that were to happen or will XDA. You've been pretty well warned. Don't worry this is a pretty easy patch to apply so don't worry too much about it. Smile, eat a Kit Kat, and just do what I tell you. In no time you'll have working Wifi on this ROM.
FILES
4.3param_tz.zip - 690.83 KB
INSTRUCTONS
1 - Download Odin3 and the WiFi Fix files.
2 - Extract Odin3 and the WiFi Fix files. For the WiFi fix you just need to extract 4.3param_tz.zip so the 4.3param_tz.tar file is ready for us with Odin3.
3 - Download and install Samsung drivers if you don't have them already.
4 - Turn off Note 2. After turned off press Volume Down + Home Button + Power to boot into the bootloader.
5 - Plug Note 2 into PC with Odin3 running.
6 - Once your PC has detected and installed drivers your Note 2 should show up in Odin3.
7 - Load the Wifi fix file (should be named 4.3param_tz.tar) into the PDA option in Odin3.
8 - Hit the Start button. It'll only take seconds for the file to do its magic then your Note 2 will reboot into recovery.
9 - Reboot out of recovery.
10 - ????
11 - Wifi should work now!
12 - ????????
13 - PROFIT!
Click to expand...
Click to collapse
Lost root?
Flash SuperSU from this thread
[2013.11.26] SuperSU v1.80 by Chainfire
Features And Mods
Wanam Xposed
Credit
wesamothman for the base and passing ideas back and forth
lacoursiere also for passing ideas back and forth
stvn1337 for finding the sec-ril from Spint Note2
Nice!!!!
Sent from my SCH-I605 using xda app-developers app
Sweet...if u need help let me know...I'm willing to do what I can to help even test...
Nice I'll keep an eye on this thread.
Why haven't people been working on 4.3? I wish I knew how to
Sent from my SCH-I605 using xda app-developers app
m0j09987 said:
Why haven't people been working on 4.3? I wish I knew how to
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
What does your comment mean?...
4.3 aosp is out...
4.3 TW JUST LEAKED WITHIN 24hrs ago...
And I guess im NOT working on 4.3??? Wtf man
No offense bro. U stated that your not working on it and its for Dev. That's all I'm saying . I mean if you got it then by all mean mad props to u and looking forward to using your work.
Sent from my SCH-I605 using xda app-developers app
m0j09987 said:
No offense bro. U stated that your not working on it and its for Dev. That's all I'm saying . I mean if you got it then by all mean mad props to u and looking forward to using your work.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Please tell me where I said im not working on it? You know cause the port was done all by itself...
I mean no disrespect but its comments like yours why less and less people release crap, why not just get it working for myself and thats it... why do other people need to use devs hard work and not give a hoot. Then make threads about where did all the TW devs go? I havent seen what I deem as enough updates or some other ungrateful soundsing posts
Gentleman please stay OT and inline. No disrespect allowed.
Thank you for your cooperation.
EFM
runandhide05 I just want to say thanks for all the hard work you have shared with us so far on bringing the Touchwiz 4.3 leak to our Verizon Note 2.
AngryManMLS said:
runandhide05 I just want to say thanks for all the hard work you have shared with us so far on bringing the Touchwiz 4.3 leak to our Verizon Note 2.
Click to expand...
Click to collapse
Thanks for the initial push, whether it becomes anything or not. You're helping to keep the note 2 alive.
Runandhide. I'm sorry about what I said. I didn't mean it the way you took it. I thank you for what u got to our phone.
Sent from my SCH-I605 using xda app-developers app
can't wait to try this. I'm tempted to flash and make a nan so when it's in alpha/beta stage i can just flash that over it lol
OP, thanks for making this available to DEVs. So sorry that some people just don't get it or appreciate it!
Nice!! Thanks for giving me/us hope on seeing a TW 4.3 ROM before Big Red gets around to releasing one :beer:
Sent from my SCH-I605 using xda app-developers app
@runandhide05
Thank you man. Really appreciate what you're doing.
Dave
This is good news. Thanks for sharing.
Sent from my SCH-I605 using Tapatalk 4
@runandhide05 I am in the same boat as you I have everything working except data/signal.. I have ported from n7100 before but the process seems to be different in this case..4.3. I am still trying to get it corrected with different methods. Can you tell me what you have done so far so we can compare? I started with stock base 4.3 N7100.. Added our csc files, build.prop edits for cdma and a couple lib files and our modem. When I boot it boots fine.. In mobile networks I have option to select cdma/lte but still no signal.. We our missing something that i cant seem to find. Some files that we usually port over have been changed or are non existant in 4.3... and btw what kernel are you using I think this maybe the source of our problem..I can only seem to flash it and get it to boot with the 4.3 stock kernel and I am not skilled or have enough knowledge to know whether kernels have anything to do with lte capabilities.. I would assume so.. And if thats the case we will have to wait for the n7105 leak to get kernel source..
lacoursiere18 said:
@runandhide05 I am in the same boat as you I have everything working except data/signal.. I have ported from n7100 before but the process seems to be different in this case..4.3. I am still trying to get it corrected with different methods. Can you tell me what you have done so far so we can compare? I started with stock base 4.3 N7100.. Added our csc files, build.prop edits for cdma and a couple lib files and our modem. When I boot it boots fine.. In mobile networks I have option to select cdma/lte but still no signal.. We our missing something that i cant seem to find. Some files that we usually port over have been changed or are non existant in 4.3... and btw what kernel are you using I think this maybe the source of our problem..I can only seem to flash it and get it to boot with the 4.3 stock kernel and I am not skilled or have enough knowledge to know whether kernels have anything to do with lte capabilities.. I would assume so.. And if thats the case we will have to wait for the n7105 leak to get kernel source..
Click to expand...
Click to collapse
Its looking like we will need to wait for a n7105 for the lte.
Using stock kernel. All others fail to boot.
runandhide05 said:
Its looking like we will need to wait for a n7105 for the lte.
Using stock kernel. All others fail to boot.
Click to expand...
Click to collapse
I do have a friend that I have developed a rom with said that he got it booted and signal.. SO let me talk to him today and maybe we can crack this thing.. I was thinking maybe n7105 saber kernel..I will try and let you know.. I have wifi working as well as gps..
I'm dropping this in here for people to use as a base, I don't intend to support it but will add any fixes that people upload. It's a stock 4.4.4 twizz base with qmg support for note 4 apps. It's stable and everything seems to work but there are issues with the spen as I have only added spen libs and there are no spen options in settings, you can probably just drop n2 settings in but I haven't tried too busy working with the eteam.
Its a port of the s3 lte 4.4.4 official stock from here:
[I9300] [Touchwiz Android 4.4.4]
It works with both agni and devil kernel but devil is included. Please feel free to use it but it would be nice if credit was given as not being a developer I spent a lot of time on it.
I would like to thank @bsbachert and @Bajanman for their help
Download http://www.mediafire.com/download/sb08uib2ek6175m
XDA:DevDB Information
Port I9305NXXUFNI4, ROM for the Samsung Galaxy Note II
Contributors
sawdoctor, Bajanman
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-10-07
Last Updated 2014-10-11
Thanks a lot, I downloaded the rom to my pc this afternoon from the very first link and now it's on my sdcard waiting for a test
I saw there should be some issues with spen detach sounds, but inside /system/media/audio/ui I seem to see no pen sounds, so I have just put them there by myself... Just a try before flashing.
I am looking forward to testing the new look and I will report my experience, though I suppose Dn3 4.4.2 will still be my daily rom for a while.
We're working with the eteam to port the n4 stuff, well they're porting it we're just getting it to work on our device. So hopefully we'll get a 4.4.4 base for dn3
I'll hold on to this spot...[emoji13]
sawdoctor said:
I'm dropping this in here for people to use as a base, I don't intend to support it but will add any fixes that people upload. It's a stock 4.4.4 twizz base with qmg support for note 4 apps. It's stable and everything seems to work but there are issues with the spen as I have only added spen libs and there are no spen options in settings, you can probably just drop n2 settings in but I haven't tried too busy working with the eteam.
Its a port of the s3 lte 4.4.4 official stock from here
http://http://forum.xda-developers....ck-rom-4-4-4-gt-i9305n-i9305nxxufni4-t2886807
It works with both agni and devil kernel but devil is included. Please feel free to use it but it would be nice if credit was given as not being a developer I spent a lot of time on it.
I would like to thank @bsbachert and @Bajanman for their help
Download http://www.mediafire.com/download/sb08uib2ek6175m
XDA:DevDB Information
Port I9305NXXUFNI4, ROM for the Samsung Galaxy Note II
Contributors
sawdoctor, Bajanman
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-10-07
Last Updated 2014-10-07
Click to expand...
Click to collapse
I had trouble with settings constantly force closing so I couldn't complete setup.
Downloading now
I couldn't get it to boot on Philz or twrp
I got it to boot using the newest TWRP but couldn't get it beyond initial setup. Settings kept force closing on me.
I may try some amateur editing with this but I have far less experience than most anybody.
Thanks for posting this, Saw Doctor!
Sent from my Note 2 SGH-I317
Can you flash this on T-Mobile note 2?
Sent from my GT-N7105 using XDA Premium HD app
When I tried on philz it said to update to the newest binary then rebooted and when i tried to flash it in trwp it said to os was installed
I did the same thing! Did a full wipe, flashed with TWRP and after flash I went to reboot and it said no OS installed. So I just flashed again dirty and it installed and booted fine into set-up! During set up the screen froze and just pulled battery and rebooted to continue setup! After setup I got a few more screen freezes and just pulled battery and it was fine after it settled for a while:thumbup: Seemed very smooth and fast. I had to restore back cause I didnt have much time to test, but will redownload and report back
Great base @sawdoctor! Thanks for your hard work and i hope you and e team come up with somthing sick! Cause DN5v2.2 is frickin awesome and has been my daily driver for a while now and rock solid
Sent from my SGH-T889 using xda app-developers app
Goody68 said:
I did the same thing! Did a full wipe, flashed with TWRP and after flash I went to reboot and it said no OS installed. So I just flashed again dirty and it installed and booted fine into set-up! During set up the screen froze and just pulled battery and rebooted to continue setup! After setup I got a few more screen freezes and just pulled battery and it was fine after it settled for a while[emoji106] Seemed very smooth and fast. I had to restore back cause I didnt have much time to test, but will redownload and report back
Great base @sawdoctor! Thanks for your hard work and i hope you and e team come up with somthing sick! Cause DN5v2.2 is frickin awesome and has been my daily driver for a while now and rock solid
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I had no issues with the base I uploaded and neither did @Bajanman. I'll re upload another copy later incase it's a bad upload as I'd fixed all the fc issues. Just having issues with my own phone atm think my pit file is corrupt but then I don't think flashing as many zips as i have is ever going to do the phone any good
sawdoctor said:
Thanks, I had no issues with the base I uploaded and neither did @Bajanman. I'll re upload another copy later incase it's a bad upload as I'd fixed all the fc issues. Just having issues with my own phone atm think my pit file is corrupt but then I don't think flashing as many zips as i have is ever going to do the phone any good
Click to expand...
Click to collapse
Sorry for OT, but is it intended by the team (or a teammember) to share a stable n7100 base also? Thx :fingers-crossed:
(Must admit, that my own efforts were not successful enough :crying
Androidwizzard said:
Sorry for OT, but is it intended by the team (or a teammember) to share a stable n7100 base also? Thx :fingers-crossed:
(Must admit, that my own efforts were not successful enough :crying
Click to expand...
Click to collapse
I can only tell you what I know, the eteam are concentrating thier efforts on updating dn3 to a 4.4.4 base and porting n4 features. It's not really my place to say what they have working and what they don't but I believe they have a stable base. I know what we have working on the n7105 and it is promising but there are a lot of bugs to iron out. The base I dropped I was using as a daily driver it's that stable
Just to share my experience:
- N7105, 4.1.2 booloader;
- all wipes but internal sd;
- with TWRP 2.6.31 (the one modified for 4.4.4) I got "no OS installed" so as other users have already reported;
- with the latest cwm, I was able to flash and get the rom booted, but I could not go beyond settings.
I have had neither the time to try any solution, nor to use adb for a log, because my backup to the extsd was corrupted and I was compelled to using odin with a rather damaged usb cable and it was very late (so I am now back to 4.1.2 and tbh battery life was really good) but I think that the issues could be related to the old bootloader, as I could see a very short lasting popup message referring to wifisettings.
Anyway, the rom boots even with the first shift kernel.
I will try again tonight and post a log, if adb and the usb cable are my friends
I will also try a dirty flash over 4.1.2, just to see what happens.
I have had the same results but dirty flashed a second time to get the rom to boot (but again, couldn't get beyond initial setup with settings force closes after a quick flash of wifi settings). I am on the AT&T NE5 4.4.2 bootloader for the SGH-I317 so I don't think it is exactly bootloader related.
Dirty flashing on top of a 4.1.2 build works flawlessly. Everything seems to work pretty nice, since I could skip settings, but the spen works only as a pointer and with the keyboard, while I cannot activate neither air command, nor use the pen to air scroll.
And in settings it is shown as 4.4.2, instead of 4.4.4, but it must be a typo.
I changed the SecSettings.apk and SecSettingsProvider.apk and got it to setup. But when trying to access settings after it setup would FC. Didnt really test it out because of that..
Here's a few screenshots..
Double0EK said:
I changed the SecSettings.apk and SecSettingsProvider.apk and got it to setup. But when trying to access settings after it setup would FC. Didnt really test it out because of that..
Here's a few screenshots..
https://mega.co.nz/#!09kHwCAC!wGLsrWU1mfD3UqwWHsKEimGYU8Uy-KFt6bMOsPFVUb4
Click to expand...
Click to collapse
Thanks for your effort. I downloaded, but it must have been corrupted download because now i can't even start installation.
Just wait till ops drop his fixed version.
Sent from my GT-N7105 using Tapatalk
rob_z11 said:
Thanks for your effort. I downloaded, but it must have been corrupted download because now i can't even start installation.
Just wait till ops drop his fixed version.
Sent from my GT-N7105 using Tapatalk
Click to expand...
Click to collapse
You might need to update your recovery or reboot back into recovery after a wipe.
I used TWRP 2.8.0.1 and had no issues. Also, im using Tmo T889 with 4.1.2 Bootloader.