I Have An Evo 3D that a friend gave me and I don't know what to do with it. the phone boots up and the lights come on and everything except the LCD. If i hold a flashlight to it i can see the screen is working, but i don't want to spend 40$ for a new LCD if the back-light problem is on the phone and not the LCD screen. I've been able to boot it into the Recovery (BTW it is not rooted yet) and Wiped all the information on it and i even used the RUU for the 3D and i had no luck.
Any Ideas Would Be Greatly Appreciated, Thanks!
Related
I just bought this EVO 3D and sometimes the touch screen becomes unresponsive and I must turn the screen off and back on to get it to work again. After I do that the screen works fine until it happens again at random times. Is anyone else experiencing this? I am on a fresh install using the latest RUU 2.08.651.2, all stock and not rooted. I have no other problems with the touch screen other then having to cycle the screen on and off once in a while. I am hoping this is a stock rom issue and not a hardware problem.
That happen to me but is not the screen is the htc sense...the issue went away with the wtsb rom....
Sent From My HTC EVO 3D ROOTED
My EVO 3D (stock/unroot) top half screen intermittent unresponsive.
And sometimes can scroll up in the menu, but can't scroll down at all.
Contacted HTC email support, and followed the guide to hard reset the phone, but problem starts happening within 24 hours without any other apps installed.
Here's the video:
My EVO 3D (stock/unroot) top half screen intermittent unresponsive.
And sometimes can scroll up in the menu, but can't scroll down at all.
Contacted HTC email support, and followed the guide to hard reset the phone, but problem starts happening within 24 hours without any other apps installed.
Here's the video:
/watch?v=4uTMVuFh50M (youtube)
I had dead pixels had to return Phone now on new hboot good luck
I'm thinking my EVO 3D might have an issue like the EVO 4G. I went ahead and unlocked my phone then flashed CM7 alpha. With CM7 it also stopped responding at random times. I also noticed if I hold the phone with my hand wrapped firmly around it the issue will not happen. Last night I used the phone for over an hour straight without having to cycle the screen on and off. Today it happen 6 out 10 times I used my today at work without holding it firmly.
Or maybe I just have a bad digitizer?
I've had this too after flashing a new rom. I'd have to turn the screen off and back on again to fix. I'm not sure if there is a permanent fix at all. Been trying to find one.
What is driving me crazy is I can't figure out if I should just go ahead a replace the digitizer or is it software/firmware related. It seems to be app specific and its always the same spots on specific apps that don't work. Sometimes the phone will work normally depending on how I hold it. Also games do not seem to be affected and pulling down the status bar usually always causes the screen to not respond to touch. How can the screen recognize my touch in 1 app but not recognize the same spot in another app? If anyone has dealt with this before could you please advise me on what to do, thank you.
I am having the exact same problem and my phone is now getting to the point where it is unusable. I took it in to sprint and said listen this isnt just a software thing my touch screen doesnt work. so i left it there for 3 hours to come back and them say... oh it was a software thing we did a hard reset and its fine. and then an hour later it started happening i dont know what to do sprint wont fix it and i have all the insurance and protection plans. I feel like I was railroaded on this pos phone!
danweb66 said:
I am having the exact same problem and my phone is now getting to the point where it is unusable. I took it in to sprint and said listen this isnt just a software thing my touch screen doesnt work. so i left it there for 3 hours to come back and them say... oh it was a software thing we did a hard reset and its fine. and then an hour later it started happening i dont know what to do sprint wont fix it and i have all the insurance and protection plans. I feel like I was railroaded on this pos phone!
Click to expand...
Click to collapse
Def. Software related, a ported swype keyboard on miui wouldn't work for me, would show up just couldn't use half the bottons, have you calibrated the touch screen any issues with that?
Shot from my shooter in 3D
injected with cleanrom2.7
try this from sensation forum
http://forum.xda-developers.com/showthread.php?t=1206188
jsergio123 said:
I just bought this EVO 3D and sometimes the touch screen becomes unresponsive and I must turn the screen off and back on to get it to work again. After I do that the screen works fine until it happens again at random times. Is anyone else experiencing this? I am on a fresh install using the latest RUU 2.08.651.2, all stock and not rooted. I have no other problems with the touch screen other then having to cycle the screen on and off once in a while. I am hoping this is a stock rom issue and not a hardware problem.
Click to expand...
Click to collapse
Nevermind, link is down.
I took it into sprint because of the same problem about a quarter of the bottom screen would not respond I didn't have insurance, I did have to unroot it before I took it in, but they swapped it out with no hassle.
They said I was the 3rd person with the same issue? Could be a HTC problem? But my new EVO 3D is running infected eternity ROM no problem
Big up to SYNERGY ROMS.....
Sent from my PG86100 using XDA Premium App
Yesterday my girlfriend woke up and tried turning on her Evo and the capacitive buttons came on but the screen would not. She noticed the phone was VERY hot also. She did a battery pull and same thing, the phone booted up but the LCD was just completely black. I had MeanROM flashed on there and I'm afraid to take it to Sprint to see if they will do a $35 LCD swap. What do you guys think I should do?
Note: She's going to get the Evo 4G LTE next month so it's not a huge deal, but we were hoping to make up the cost by selling the 3D.
Hello.
When I leave my phone in sleep mode (screen locked and light off) and try to wake with On/Off button, sometimes I get a black screen with a faintly image. The touchscreen works and all the buttons, and if you click 2 times On/Off button - the image appears all ok. I tried to flash another stock ROM - all the same. Then I`ve unlocked the bootloader, rooted the phone and even did the S-off with wire trick (1.53 Hboot). Then I`ve tried 3-4 custom ROMs with 6-7 different kernels, from stock to custom, but all the same. Yes, I`ve updated the firmware file, also, but with no difference.
Well, I see that this problem is not so usual, but I couldn`t find any real solution. Did anyone have this kind of problem and solved it? Since I got this phone from another country - official warranty is out of the question, I need a DIY solution.
Any help is greatly appreciated.
THX in advance!!!
I would have to say it looks like the light for your screen is dying, I had my screen replaced once, my screen would flicker from very dark to very bright
Sent from my HTC EVO 3D X515m using xda premium
flashallthetime said:
I would have to say it looks like the light for your screen is dying, I had my screen replaced once, my screen would flicker from very dark to very bright
Sent from my HTC EVO 3D X515m using xda premium
Click to expand...
Click to collapse
hmmmm, but when I get the OK image - it doesn`t flicker or go from dark to bright, it only has trouble to "wake up from sleep mode". even when i relock the screen quickly and don`t leave it unused for 2-3 minutes, the screen works OK every time....it looks like a software problem, but still I didn`t manage to fix it with all the ROMs/kernels/firmwares I`ve flashed....
E-ducation said:
Hello.
When I leave my phone in sleep mode (screen locked and light off) and try to wake with On/Off button, sometimes I get a black screen with a faintly image. The touchscreen works and all the buttons, and if you click 2 times On/Off button - the image appears all ok. I tried to flash another stock ROM - all the same. Then I`ve unlocked the bootloader, rooted the phone and even did the S-off with wire trick (1.53 Hboot). Then I`ve tried 3-4 custom ROMs with 6-7 different kernels, from stock to custom, but all the same. Yes, I`ve updated the firmware file, also, but with no difference.
Well, I see that this problem is not so usual, but I couldn`t find any real solution. Did anyone have this kind of problem and solved it? Since I got this phone from another country - official warranty is out of the question, I need a DIY solution.
Any help is greatly appreciated.
THX in advance!!!
Click to expand...
Click to collapse
Thinking about how to troubleshoot if hardware or software. When in sleep mode, instead of using the power button, I would have the phone plugged into a computer and use the " adb reboot " command to reboot the phone without touching the phone a few times and see if it lights up correctly. The first thing you should see is the boot screen, and if it works every time, then you do have an issue with your firmware. If you don't see that boot screen first every time, then as much as it sucks, I would guess there is a hardware issue.
Good luck, but this is the easiest way I know of to help determine what the issue likely is.
Minor update here, the first thing (at least on mine) that I see is the lock screen for just a quick second or two, then it quickly goes into the boot sequence. This is important as in "sleep" the ROM is running, so if the first thing you see is the boot sequence every time, and not the lock screen, then it points more to a software problem than a hardware issue. CM9 had an issue for the epic4g where you had to turn it off and on sometimes to get the keyboard to light. They found the issue in the firmware causing it.
Just wanted to make this as accurate as possible.
Wow so I am not the only person with this problem. The EVO 3D that I have was replacement phone that was given to me from Sprint from the first EVO 3D that I had which had issues with the digitizer. I received the replacement phone this past Tuesday and it worked fine for two days. It was not rooted and I did install the ICS update. On Friday morning I took it off the charger and went to work, while in the break room the screen suddenly went black and I could not get the phone to display anything after that. The Android function buttons at the bottom will light up but the screen wont, the phone also gets hot even with it powered off.
Long story short, I took it back to the Sprint store where they ordered me yet another replacement EVO 3D. Has anyone had to go through 3 EVO 3Ds or more?
sonza said:
Thinking about how to troubleshoot if hardware or software. When in sleep mode, instead of using the power button, I would have the phone plugged into a computer and use the " adb reboot " command to reboot the phone without touching the phone a few times and see if it lights up correctly. The first thing you should see is the boot screen, and if it works every time, then you do have an issue with your firmware. If you don't see that boot screen first every time, then as much as it sucks, I would guess there is a hardware issue.
Good luck, but this is the easiest way I know of to help determine what the issue likely is.
Minor update here, the first thing (at least on mine) that I see is the lock screen for just a quick second or two, then it quickly goes into the boot sequence. This is important as in "sleep" the ROM is running, so if the first thing you see is the boot sequence every time, and not the lock screen, then it points more to a software problem than a hardware issue. CM9 had an issue for the epic4g where you had to turn it off and on sometimes to get the keyboard to light. They found the issue in the firmware causing it.
Just wanted to make this as accurate as possible.
Click to expand...
Click to collapse
Excellent thinking, I didn't think in that direction. I'll try this tomorow, since I'm not at home. My personal oppinion that it's a software problem but if I did all the above - what did I miss? If I flashed the firmware, ROM and kernel, what else is left untouched that could affect the LCD? Could anyone suggest a good kernel? Or can I downgrade the firmware, since no one had such a problem with GB?
just to inform all - I tried all soft solutions, but all the samo. finaly - I replaced the LCD and everything is OK.
THX all for help
Hey guys, so I had dropped my phone and shattered the screen on the top left and there was a crack down the middle. Anyways, I ordered a replacement and replaced it..and low and behold, either I did a bad job or somethings up with the ribbon from the replacement screen. When I turn it on, the screen will display this weird static and I can see the mikmik splash screen (Newts RLS6.0), then it'll go black. I guess once the phone goes into sleep mode I can turn the screen back on with no problems. But, here's my main problem..I can't get into amon ra without the screen completely being messed up. I'm a flashaholic and this is terrible for me. Does anyone know how to fix the problem itself, or is there a way I can flash ROMs through PC? (S-Off). Thank you guys in advance
Hey everyone,
I just got a used EVO 3D shooteru and noticed that when the battery is inserted the back light of the LCD constantly stays on even without turning the actual phone on. Its brighter on one side than it is on the other. I did a hard reset but nothing changed. I decided to flash a custom ROM and see if anything changes. It is now rooted, s-off running Genesis v6. Absolutely no change. I've noticed that the LCD flickers sometimes. Also, when I go into fastboot by holding down Volume down and power ..before it boots I get a gray screen.
Does anyone have any ideas what this might be?
Most likely it's a hardware problem.
MrJyrks said:
Most likely it's a hardware problem.
Click to expand...
Click to collapse
Ya