Hi folks,
I want to develop a custom lockscreen for android ICS tabs. From what i googled it seems that there are two ways:
1. develop custom homescreen with some lockscreen mechanism (which can take PIN from user and show user home after validation) using standard SDk APIs.
2. Develop a custom lockscreen, replacing default one with it using flashing at OS level.
can you please help me out, also which of two will be more efficient sdk api's or modifying ROM (im not planning to put it on market anyway ) , also can please point me to refrences where I can start learning android development (ROM customization and sdk).......
thanks in advance ......
Andriod n00b
Hi folks,
I want to develop a custom lockscreen for android ICS tabs. From what i googled it seems that there are two ways:
1. develop custom homescreen with some lockscreen mechanism (which can take PIN from user and show user home after validation) using standard SDk APIs.
2. Develop a custom lockscreen, replacing default one with it using flashing at OS level.
can you please help me out, also which of two will be more efficient sdk api's or modifying ROM (im not planning to put it on market anyway ) , also can please point me to refrences where I can start learning android development (ROM customization and sdk).......
thanks in advance ......
Andriod n00b
After a bit research how I could "port" PIE to my actual ROM BB7 I found an amazing app! It's called LMT launcher and it can give you PIE! I just tested on BB7 and there it works fine, I'm pretty sure it should also work with stock and other AOSP ROMs as our device is ARM v7 which the libs are compiled for :laugh: (but not sure about ICS)
You can find the download in the LMT Launcher thread attached - just install it as a normal app ROOT REQUIRED!
To get PIE, just open the LMT app (although it's called launcher it's just an app and your launcher will stay stock, trebuchet or whatever you use, just PIE will be added to it ), go to the PIE tab, configure the buttons how you want them and then go to the first tab back and activate the gestures and maybe set activate at boot :good:
Basically all I can say about it as I have just discovered it before 3 hours or sth like that and not tried many customizations, so if there are important things (like if it's not compatible with ROM xx) just tell me and I'll add it to OP if it's necessary...
delete
Hello can anyone provide me with a system ui.apk that is modded to look like the touchwiz statusbar and can anyone give me a link to the last cm10.1 as i cant find it on the cm site i only find the experimental versions
1. Search for CM on Google
2. Search Touchwiz 5 theme on Play Store
3. Search for TW launcher
Hello
I dont want a theme ive tried a few and they change things I dont want them to be changed I just want the statusbar without the use of any application.
I already have the touchwiz launcher so no need for it
I searched for cm10.1 on google again just to show you that I couldnt find anything but guess what I noticed that on the cm site there is the rc build of cm10.1 so I guess you helped me there
So I just need a systemui.apk that contains a modified statusbar as I want to use it in my rom.
Modified in what way. What sort of look? Best place to look is theams and apps thread if you don't want apps of playstore ect ect
I9100/I9300
Samsung Galaxy s5 Rom for karboon titanium s5+/Coolpad 7295c..
Added tweaks for better Ram MANAGEMENT.
LONGER battery life.
Both sim 3g Support.
Brighter Flashlight.
Stock Camera for better pictures.
Android Version: 4.2.2
otg support.
clever gestures.
Transperent status bar.
And many more tweaks.. Not an single bug till now.If you find any report it to me{i can bet you wont find any bug}:fingers-crossed::fingers-crossed::fingers-crossed:
Downloading Link is in the comments section..
{i am not the developer of this rom i just ported it} if you are developer ask me to give you credits as i dont know who developed this rom i got it from my friend to port it..
Sorry i dont post much on XDA so i am not allowed to post an external link here..YOu Can see the Link to download rom in attachment of my comment..HOPE YOU LIKE MY WORK...MORE TO COME NOw+
Sorry for uploading link in attachment..
I am an junior member and i dont post much so i am not allowed to post external links in my threads
Faiz.Sayyed said:
I am an junior member and i dont post much so i am not allowed to post external links in my threads
Click to expand...
Click to collapse
Thanks for that. I'm downloading it now. Will test it in a few hours ...
Link : www.goo.gl/Woc7SS
Let me have a guess...
Android v 4.2.2
Based on Xperia v2 ROM ( from the A919 Tool app icon and the normal nav bar icons in screenshot no. 2, and also the background in screenshot no. 1 where a message is seen saying that " Actually I was bored with Xperia v2 ROM so I made this ROM. " )
Changed Framework apk and systemui apk
Added Samsung Apps like the launcher and calendar, etc.
Updated GmsCore.apk (or Google Play Services to be simple)
Did not edit and/or change the data folder
Followed any MTK porting guide
Did a quick port today ( from the date and time in the screenshots )
Better RAM management -- Tweaked minfree values would be my guess
Did not change the Flashlight app (TinnoLED.apk)
Brighter Flashlight -- Not as easy as he hoped. He would need some redirection of app processing power to the flashlight app to increase its importance, and thereby increase the flashlight brightness. I'm guessing he hasn't done that, so you'd better remove that line.
Did not change the default time zone in build.prop settings (It is set to phillipines time. )
Neat. Good attempt.
Bugs :
Transparent Status Bar
From the screenshots, it is apparent that the Status Bar isn't transparent. You mean that the background of the Notifications panel is transparent. Status Bar transparency refers to the status bar having the colour of the app's upper part. Like in the first screenshot, the status bar (the part with the battery charging info, network signal info, clock, etc.) should have the colour of the app. (like its background should have whatsapp's green colour while running whatsapp)
But, that is more of a misconception than a bug.
Here is a bug which he cannot fix.
3g support on both SIMs.
For that, you need hardware support. It is wrongly mentioned in the Xperia ROM v2 too. I have tried and tested that in almost all other ROMs like MIUI v5, Xperia ROM v2, Stock ROM, etc. and it all comes down to the same thing. YOU NEED HARDWARE SUPPORT FOR 3G IN BOTH SIMS.
A piece of advice : Do not bet that there won't be an bugs at all. Each and every ROM might have a bug that the developer might have overlooked.
Here are some things your friend might have done or should do if he hasn't done yet.
Changing the build.prop setting of ro.product.**** to that of Karbonn's from MyPhone Agua Cyclone ( Xperia ROM v2 was built on that phone's ROM )
Add Material Design Apps from Apkmirror like Gmail 5.0, Maps, etc.
Try porting Kitkat ROMs to Jelly Bean based devices by modifying the installation procedure to include the priv-app folder
Try porting CyanogenMod to this device
Help me in porting Carbon ROM and/or CyanogenMod 12 to this device.
Mention how he got the updater script to work properly and install the ROM perfectly in TWRP and Philz Recovery
Sign the ROM using ZipSigner app and then upload it.
Add more features to it
Here are a few suggestions :
Update the version of SuperSU and then install it.
Make the Xposed Framework built-in. ( Not to be installed manually after installing the ROM )
Pre-install GravityBox or XBlast tools.
Odex the apps folder for better RAM usage
Increase the wifi supplicant scan interval
Throw in some paid apps for free.
Increase the net buffer size
Add the X-Reality engine
ZipAlign all apks.
Add some more fonts ( other than Choco cookie )
Add more sounds for ringtones, audio, etc.
Mention all these to him, and if possible, ask him whether he could help me to develop other ROMs for this device.
BRO thanks for your opinions and thought
rjt.rockx said:
Thanks for that. I'm downloading it now. Will test it in a few hours ...
Link : www.goo.gl/Woc7SS
Let me have a guess...
Android v 4.2.2
Based on Xperia v2 ROM ( from the A919 Tool app icon and the normal nav bar icons in screenshot no. 2, and also the background in screenshot no. 1 where a message is seen saying that " Actually I was bored with Xperia v2 ROM so I made this ROM. " )
Changed Framework apk and systemui apk
Added Samsung Apps like the launcher and calendar, etc.
Updated GmsCore.apk (or Google Play Services to be simple)
Did not edit and/or change the data folder
Followed any MTK porting guide
Did a quick port today ( from the date and time in the screenshots )
Better RAM management -- Tweaked minfree values would be my guess
Did not change the Flashlight app (TinnoLED.apk)
Brighter Flashlight -- Not as easy as he hoped. He would need some redirection of app processing power to the flashlight app to increase its importance, and thereby increase the flashlight brightness. I'm guessing he hasn't done that, so you'd better remove that line.
Did not change the default time zone in build.prop settings (It is set to phillipines time. )
Neat. Good attempt.
Bugs :
Transparent Status Bar
From the screenshots, it is apparent that the Status Bar isn't transparent. You mean that the background of the Notifications panel is transparent. Status Bar transparency refers to the status bar having the colour of the app's upper part. Like in the first screenshot, the status bar (the part with the battery charging info, network signal info, clock, etc.) should have the colour of the app. (like its background should have whatsapp's green colour while running whatsapp)
But, that is more of a misconception than a bug.
Here is a bug which he cannot fix.
3g support on both SIMs.
For that, you need hardware support. It is wrongly mentioned in the Xperia ROM v2 too. I have tried and tested that in almost all other ROMs like MIUI v5, Xperia ROM v2, Stock ROM, etc. and it all comes down to the same thing. YOU NEED HARDWARE SUPPORT FOR 3G IN BOTH SIMS.
A piece of advice : Do not bet that there won't be an bugs at all. Each and every ROM might have a bug that the developer might have overlooked.
Here are some things your friend might have done or should do if he hasn't done yet.
Changing the build.prop setting of ro.product.**** to that of Karbonn's from MyPhone Agua Cyclone ( Xperia ROM v2 was built on that phone's ROM )
Add Material Design Apps from Apkmirror like Gmail 5.0, Maps, etc.
Try porting Kitkat ROMs to Jelly Bean based devices by modifying the installation procedure to include the priv-app folder
Try porting CyanogenMod to this device
Help me in porting Carbon ROM and/or CyanogenMod 12 to this device.
Mention how he got the updater script to work properly and install the ROM perfectly in TWRP and Philz Recovery
Sign the ROM using ZipSigner app and then upload it.
Add more features to it
Here are a few suggestions :
Update the version of SuperSU and then install it.
Make the Xposed Framework built-in. ( Not to be installed manually after installing the ROM )
Pre-install GravityBox or XBlast tools.
Odex the apps folder for better RAM usage
Increase the wifi supplicant scan interval
Throw in some paid apps for free.
Increase the net buffer size
Add the X-Reality engine
ZipAlign all apks.
Add some more fonts ( other than Choco cookie )
Add more sounds for ringtones, audio, etc.
Mention all these to him, and if possible, ask him whether he could help me to develop other ROMs for this device.
Click to expand...
Click to collapse
Bro My friend Downloaded The Rom and gave it to me i ported it not him he just downloaded the rom as i have an slow connection and i ported the rom not my friend..Though thanks for your opinion
BRO
rjt.rockx said:
Thanks for that. I'm downloading it now. Will test it in a few hours ...
Link : www.goo.gl/Woc7SS
Let me have a guess...
Android v 4.2.2
Based on Xperia v2 ROM ( from the A919 Tool app icon and the normal nav bar icons in screenshot no. 2, and also the background in screenshot no. 1 where a message is seen saying that " Actually I was bored with Xperia v2 ROM so I made this ROM. " )
Changed Framework apk and systemui apk
Added Samsung Apps like the launcher and calendar, etc.
Updated GmsCore.apk (or Google Play Services to be simple)
Did not edit and/or change the data folder
Followed any MTK porting guide
Did a quick port today ( from the date and time in the screenshots )
Better RAM management -- Tweaked minfree values would be my guess
Did not change the Flashlight app (TinnoLED.apk)
Brighter Flashlight -- Not as easy as he hoped. He would need some redirection of app processing power to the flashlight app to increase its importance, and thereby increase the flashlight brightness. I'm guessing he hasn't done that, so you'd better remove that line.
Did not change the default time zone in build.prop settings (It is set to phillipines time. )
Neat. Good attempt.
Bugs :
Transparent Status Bar
From the screenshots, it is apparent that the Status Bar isn't transparent. You mean that the background of the Notifications panel is transparent. Status Bar transparency refers to the status bar having the colour of the app's upper part. Like in the first screenshot, the status bar (the part with the battery charging info, network signal info, clock, etc.) should have the colour of the app. (like its background should have whatsapp's green colour while running whatsapp)
But, that is more of a misconception than a bug.
Here is a bug which he cannot fix.
3g support on both SIMs.
For that, you need hardware support. It is wrongly mentioned in the Xperia ROM v2 too. I have tried and tested that in almost all other ROMs like MIUI v5, Xperia ROM v2, Stock ROM, etc. and it all comes down to the same thing. YOU NEED HARDWARE SUPPORT FOR 3G IN BOTH SIMS.
A piece of advice : Do not bet that there won't be an bugs at all. Each and every ROM might have a bug that the developer might have overlooked.
Here are some things your friend might have done or should do if he hasn't done yet.
Changing the build.prop setting of ro.product.**** to that of Karbonn's from MyPhone Agua Cyclone ( Xperia ROM v2 was built on that phone's ROM )
Add Material Design Apps from Apkmirror like Gmail 5.0, Maps, etc.
Try porting Kitkat ROMs to Jelly Bean based devices by modifying the installation procedure to include the priv-app folder
Try porting CyanogenMod to this device
Help me in porting Carbon ROM and/or CyanogenMod 12 to this device.
Mention how he got the updater script to work properly and install the ROM perfectly in TWRP and Philz Recovery
Sign the ROM using ZipSigner app and then upload it.
Add more features to it
Here are a few suggestions :
Update the version of SuperSU and then install it.
Make the Xposed Framework built-in. ( Not to be installed manually after installing the ROM )
Pre-install GravityBox or XBlast tools.
Odex the apps folder for better RAM usage
Increase the wifi supplicant scan interval
Throw in some paid apps for free.
Increase the net buffer size
Add the X-Reality engine
ZipAlign all apks.
Add some more fonts ( other than Choco cookie )
Add more sounds for ringtones, audio, etc.
Mention all these to him, and if possible, ask him whether he could help me to develop other ROMs for this device.
Click to expand...
Click to collapse
Bro what help you need may be i can help you..
Bro Need your help here now...
rjt.rockx said:
Thanks for that. I'm downloading it now. Will test it in a few hours ...
Link : www.goo.gl/Woc7SS
Let me have a guess...
Android v 4.2.2
Based on Xperia v2 ROM ( from the A919 Tool app icon and the normal nav bar icons in screenshot no. 2, and also the background in screenshot no. 1 where a message is seen saying that " Actually I was bored with Xperia v2 ROM so I made this ROM. " )
Changed Framework apk and systemui apk
Added Samsung Apps like the launcher and calendar, etc.
Updated GmsCore.apk (or Google Play Services to be simple)
Did not edit and/or change the data folder
Followed any MTK porting guide
Did a quick port today ( from the date and time in the screenshots )
Better RAM management -- Tweaked minfree values would be my guess
Did not change the Flashlight app (TinnoLED.apk)
Brighter Flashlight -- Not as easy as he hoped. He would need some redirection of app processing power to the flashlight app to increase its importance, and thereby increase the flashlight brightness. I'm guessing he hasn't done that, so you'd better remove that line.
Did not change the default time zone in build.prop settings (It is set to phillipines time. )
Neat. Good attempt.
Bugs :
Transparent Status Bar
From the screenshots, it is apparent that the Status Bar isn't transparent. You mean that the background of the Notifications panel is transparent. Status Bar transparency refers to the status bar having the colour of the app's upper part. Like in the first screenshot, the status bar (the part with the battery charging info, network signal info, clock, etc.) should have the colour of the app. (like its background should have whatsapp's green colour while running whatsapp)
But, that is more of a misconception than a bug.
Here is a bug which he cannot fix.
3g support on both SIMs.
For that, you need hardware support. It is wrongly mentioned in the Xperia ROM v2 too. I have tried and tested that in almost all other ROMs like MIUI v5, Xperia ROM v2, Stock ROM, etc. and it all comes down to the same thing. YOU NEED HARDWARE SUPPORT FOR 3G IN BOTH SIMS.
A piece of advice : Do not bet that there won't be an bugs at all. Each and every ROM might have a bug that the developer might have overlooked.
Here are some things your friend might have done or should do if he hasn't done yet.
Changing the build.prop setting of ro.product.**** to that of Karbonn's from MyPhone Agua Cyclone ( Xperia ROM v2 was built on that phone's ROM )
Add Material Design Apps from Apkmirror like Gmail 5.0, Maps, etc.
Try porting Kitkat ROMs to Jelly Bean based devices by modifying the installation procedure to include the priv-app folder
Try porting CyanogenMod to this device
Help me in porting Carbon ROM and/or CyanogenMod 12 to this device.
Mention how he got the updater script to work properly and install the ROM perfectly in TWRP and Philz Recovery
Sign the ROM using ZipSigner app and then upload it.
Add more features to it
Here are a few suggestions :
Update the version of SuperSU and then install it.
Make the Xposed Framework built-in. ( Not to be installed manually after installing the ROM )
Pre-install GravityBox or XBlast tools.
Odex the apps folder for better RAM usage
Increase the wifi supplicant scan interval
Throw in some paid apps for free.
Increase the net buffer size
Add the X-Reality engine
ZipAlign all apks.
Add some more fonts ( other than Choco cookie )
Add more sounds for ringtones, audio, etc.
Mention all these to him, and if possible, ask him whether he could help me to develop other ROMs for this device.
Click to expand...
Click to collapse
See i ported this Material L for unite 2 (a106) for our s5+ it was ported successfully and also booted up i used it for More than 3 days not found any other bug except Camera and flashlight..I changed some of its Lib files With Stock and also changed its gallery to stock and tried many other methods but still the cam bug didnt fixed..Else everything working really good.whenever i opens the cam it says unfortunately camera has stopped else everything works at its best...
Yeah, I just thought I should type out my thoughts about the ROM and then wait and see your reply. Sorry for that, though.
---------- Post added at 11:25 PM ---------- Previous post was at 11:06 PM ----------
You used some MTK porting guide, didn't you ?
Another thing, what do you mean by Material L ? Do you mean to say that you have ported an Android L ROM to this phone ?
I think you have just ported some ROM with just the Material Design UI, as seen in the screenshots (They do not have the Android L Navigation Bar Buttons. )
You could try replacing the permissions in that, as most likely, that would be the root cause of many such errors. A permission file related to the camera settings could be improperly coded, and/or might have a bad file, either corrupt or something like that.
I just needed this tiny favour from you of creating a proper, working update-binary and updater-script inside a META-INF folder which can be used for all my ROMs. If that is over, you'll be seeing those ROMs on XDA quite soon.
Another thing. In the CyanogenMod 12 Lollipop ROM which I am porting, the apps folder has individual folders for each app. So, the flashlight app is in system/app/flashlight/flashlight.apk . Could that be the cause of the ROM not installing properly ? I'm going mad over that as that was the first time I have seen any ROM with apps grouped like that.
Thanks in advance for your contribution.
tnx for posting.. try to port this rom..we r same spec of ur device..
Faiz.Sayyed said:
Samsung Galaxy s5 Rom for karboon titanium s5+/Coolpad 7295c..
Added tweaks for better Ram MANAGEMENT.
LONGER battery life.
Both sim 3g Support.
Brighter Flashlight.
Stock Camera for better pictures.
Android Version: 4.2.2
otg support.
clever gestures.
Transperent status bar.
And many more tweaks.. Not an single bug till now.If you find any report it to me{i can bet you wont find any bug}:fingers-crossed::fingers-crossed::fingers-crossed:
Downloading Link is in the comments section..
{i am not the developer of this rom i just ported it} if you are developer ask me to give you credits as i dont know who developed this rom i got it from my friend to port it..
Sorry i dont post much on XDA so i am not allowed to post an external link here..YOu Can see the Link to download rom in attachment of my comment..HOPE YOU LIKE MY WORK...MORE TO COME NOw+
Click to expand...
Click to collapse
Faiz.Sayyed said:
Samsung Galaxy s5 Rom for karboon titanium s5+/Coolpad 7295c..
Added tweaks for better Ram MANAGEMENT.
LONGER battery life.
Both sim 3g Support.
Brighter Flashlight.
Stock Camera for better pictures.
Android Version: 4.2.2
otg support.
clever gestures.
Transperent status bar.
And many more tweaks.. Not an single bug till now.If you find any report it to me{i can bet you wont find any bug}:fingers-crossed::fingers-crossed::fingers-crossed:
Downloading Link is in the comments section..
{i am not the developer of this rom i just ported it} if you are developer ask me to give you credits as i dont know who developed this rom i got it from my friend to port it..
Sorry i dont post much on XDA so i am not allowed to post an external link here..YOu Can see the Link to download rom in attachment of my comment..HOPE YOU LIKE MY WORK...MORE TO COME NOw+
Click to expand...
Click to collapse
The ROM is great!!!.Have not found the bug till now.No at least in the last 24 hrs.Really a very good effort.I in fact don't really like touchwiz,but this COOL!!!.I guess Samsung has improved touch wiz,because the old one sucked!!
Thanks anyways.Hope to expect more ROMs from you in the future!!!
Sent from my MyPhone Agua Cyclone using XDA Premium 4 mobile app