Related
I am s-off and using the latest 4ext recovery. I upgraded from revolutionary CMW to 4ext so i could try CM9. It was alright but nothing special. Afterwards i tried to update to the latest vitrous sense 4.0 rom and i couldn't get past with the boot animation. Every single ROM i tried has been like this. Im wiping the data before I flash and using supewipe.zip. I never faced issue with CMW is it the recovery or am i doing something wrong?
UnderZone7 said:
I am s-off and using the latest 4ext recovery. I upgraded from revolutionary CMW to 4ext so i could try CM9. It was alright but nothing special. Afterwards i tried to update to the latest vitrous sense 4.0 rom and i couldn't get past with the boot animation. Every single ROM i tried has been like this. Im wiping the data before I flash and using supewipe.zip. I never faced issue with CMW is it the recovery or am i doing something wrong?
Click to expand...
Click to collapse
have you tried using the app Flash GUI to install this ROM?
what is Flash GUI? and if its an app i cant boot into any roms right now. everything i try will only take me to the boot screen.
UnderZone7 said:
what is Flash GUI? and if its an app i cant boot into any roms right now. everything i try will only take me to the boot screen.
Click to expand...
Click to collapse
how long are you waitng at this boot screen... i know when i installed CM9 it took over 5 minutes at the boot screen to set it all up ... flash GUI is an app to flash roms from the phones ROM but you wont use that ...which part of the boot are you getting stuck at... the one with the CM9 logo and the rotating electric ? or at the first splash screen showing the htc logo?
wloftus said:
how long are you waitng at this boot screen... i know when i installed CM9 it took over 5 minutes at the boot screen to set it all up ... flash GUI is an app to flash roms from the phones ROM but you wont use that ...which part of the boot are you getting stuck at... the one with the CM9 logo and the rotating electric ? or at the first splash screen showing the htc logo?
Click to expand...
Click to collapse
Any rom i try to install in general wont work. They all take to their boot animations and then nothing i even let them try to boot untill my phone dies. I just tried flashing cm9 and that seems like the only rom which still works.
UnderZone7 said:
Any rom i try to install in general wont work. They all take to their boot animations and then nothing i even let them try to boot untill my phone dies. I just tried flashing cm9 and that seems like the only rom which still works.
Click to expand...
Click to collapse
have you tried extracting the boot.img file from your ROM and then manually flashing it? try MeanROM 2.3 as well its a new one that is ICS based and loads fairly fast ... atleast i had no issues with it...also on your first time boot make sure the phone is NOT plugged up to the data cable
i dont know if you know this but if you download the PG86IMG from Goo im you can put that on the root of your sd card which is the first thing you see when you click sd card you can run that from bootloader and reset the phone
I fixed the problem. I just had to use flash image gui.
UnderZone7 said:
I fixed the problem. I just had to use flash image gui.
Click to expand...
Click to collapse
Are you sure you are s-off? I ask because I have never seen anyone need Flash Image GUI who is.
Sent from my ICS 3VO with Tapatalk 2
coal686 said:
Are you sure you are s-off? I ask because I have never seen anyone need Flash Image GUI who is.
Sent from my ICS 3VO with Tapatalk 2
Click to expand...
Click to collapse
99% sure it says in my hboot I am. But is their any way to go back to revolutionary cwm i never had any problems with it.
UnderZone7 said:
99% sure it says in my hboot I am. But is their any way to go back to revolutionary cwm i never had any problems with it.
Click to expand...
Click to collapse
this one?
thats it but how do i flash it?
UnderZone7 said:
I am s-off and using the latest 4ext recovery. I upgraded from revolutionary CMW to 4ext so i could try CM9. It was alright but nothing special. Afterwards i tried to update to the latest vitrous sense 4.0 rom and i couldn't get past with the boot animation. Every single ROM i tried has been like this. Im wiping the data before I flash and using supewipe.zip. I never faced issue with CMW is it the recovery or am i doing something wrong?
Click to expand...
Click to collapse
4ext works great, under wipe, select wipe dalvich + cache, then the format all partitions(besides sd card) option near the bottom.
Then flash your Rom, by chance is 4extsmartflash on? That's for s on devices so turn it off if enabled, as you are s off.
Sent from my HTC EVO 3D X515m using Tapatalk 2
UnderZone7 said:
thats it but how do i flash it?
Click to expand...
Click to collapse
just to make it simple download the file ad rename it to recovery.img and move it to the same place the fastboot.exe is located... take your phone and boot into your hboot by holding volume down and then the power button.. scroll down to the fastboot option and press the power button... youll see the screen change and then plug your phone up to your computer you should see on your phone screen now the phrase "fastboot usb"... from there open up a ms-dos window and direct yourself to the directory with the fastboot.exe and recovery.img files.. then type in
fastboot flash recovery recovery.img
it should send and then write , when completed power your phone and then reboot into recovery and it should be then revclockmod version...and probs feel free to PM me
Happen before
This is something that happened me to me before, my problem was I erased a bunch of important stuff and tried to install a kernel using recovery. I'm on hboot 1.50 so yeah **** turn messy. But I unrooted, then re-rooted and used GUI to flash my kernel of any choice but ext to flash my rom. Revolutionary recovery doesn't work too good on my phone, so it also varies depending on recovery:fingers-crossed:, just word of advice do a factory reset+wipe dalvich cache(do it at least 2 times) and it has worked for me whenever I flash a new rom. Whenever you reboot give it some time and don't rush or press anything. Once your rom kicks in let it sit for at least a couple mins and then proceed with whatever you need to do. Hope this helps!
Hello,
I've been all over google and this site for the last two days trying to find a way to get my Evo 3d work! I tried searching the forum and unfortunately i kept getting server errors So i figured I would make a new thread in the hopes of figuring this out!
What happened:
I went through the rooting process, and I went to flash a ROM on to the phone and it would not load pass the HTC screen. I had a ROM on there of the stock version of the Sprint Evo 3d, unfortunately it wasn't the proper version and it did not allow 4G and such. So i tried to place another ROM on to the SD Card and flash it over, and for some dumb reason, I deleted the version of the Stock Rom that atleast enabled me to get the phone to turn all the way on. All I'm able now is to boot up to recovery, but I can't figure out what ROM to download to place on the phone to get me back to square one!!!
Help please!!
-Mike
jerseybizzle said:
Hello,
I've been all over google and this site for the last two days trying to find a way to get my Evo 3d work! I tried searching the forum and unfortunately i kept getting server errors So i figured I would make a new thread in the hopes of figuring this out!
What happened:
I went through the rooting process, and I went to flash a ROM on to the phone and it would not load pass the HTC screen. I had a ROM on there of the stock version of the Sprint Evo 3d, unfortunately it wasn't the proper version and it did not allow 4G and such. So i tried to place another ROM on to the SD Card and flash it over, and for some dumb reason, I deleted the version of the Stock Rom that atleast enabled me to get the phone to turn all the way on. All I'm able now is to boot up to recovery, but I can't figure out what ROM to download to place on the phone to get me back to square one!!!
Help please!!
-Mike
Click to expand...
Click to collapse
Hi jerseybizzle, I can certainly try to help you but you have to help me first.
1. Are you doing a factory reset and wiping dalvik cache before flashing?
2. What hboot version do you have?
3. Is your phone s-on or s-off?
4. Which rom did you try to flash that wouldn't boot?
wikdNoob said:
Hi jerseybizzle, I can certainly try to help you but you have to help me first.
1. Are you doing a factory reset and wiping dalvik cache before flashing?
2. What hboot version do you have?
3. Is your phone s-on or s-off?
4. Which rom did you try to flash that wouldn't boot?
Click to expand...
Click to collapse
1. Yes
2. 1.50
3. My phone says S-on but I have super user privileges and the guide I followed said I have the phone rooted whether or not it said S-Off or S-On.
4. I believe it was the ViperMod
jerseybizzle said:
1. Yes
2. 1.50
3. My phone says S-on but I have super user privileges and the guide I followed said I have the phone rooted whether or not it said S-Off or S-On.
4. I believe it was the ViperMod
Click to expand...
Click to collapse
If it was an ics Rom and you are having bootloops, it is most likely because you are s-on. I recommend getting s-off. The wire trick is easy to do, but you need to be careful.
http://forum.xda-developers.com/showthread.php?t=1585846
Sent from my ICS 3VO with Tapatalk 2
Did you flash the rom through fastboot? If you just booted into your recovery and attempted to flash the ICS version of that rom coming from GB it won't work since you still have S-ON and that doesn't let you flash certain things like kernels. You can still flash roms but you have to take a couple extra steps or achieve S-OFF.
To get your phone working again...
If you were just coming from a stock rooted rom before attempting to flash a new rom, simply download a stock rooted rom from the dev section, put it on your SD card, boot into recovery, wipe and reflash. Your phone should then boot up again.
Sent from my PG86100 using xda app-developers app
jerseybizzle said:
1. Yes
2. 1.50
3. My phone says S-on but I have super user privileges and the guide I followed said I have the phone rooted whether or not it said S-Off or S-On.
4. I believe it was the ViperMod
Click to expand...
Click to collapse
I'm guessing it was the ics version of vipermod, and since you're s-on your boot image didn't flash. So you're trying to boot an ics rom with a gingerbread kernel.
If you want to use an ics rom, you have a few choices. My favorite... Put a recovery image in the folder on your computer that has fastboot in it. Put the phone in fastboot mode and type in the command window, fastboot boot recovery.img, make sure that you name the recovery image on your comp. to "recovery.img". It should boot to recovery and you can flash away.
Something that's easier is to use 4ext recovery smart flash. I'm sure it works but I've never used it.
If you want to get back to your stock rom unrooted rom you could run an ruu.
Also, take coals advice and s-off that phone, you won't have nearly as many issues once you s-off, and you can use one of the splash screens in my Sig
flonker said:
Did you flash the rom through fastboot? If you just booted into your recovery and attempted to flash the ICS version of that rom coming from GB it won't work since you still have S-ON and that doesn't let you flash certain things like kernels. You can still flash roms but you have to take a couple extra steps or achieve S-OFF.
To get your phone working again...
If you were just coming from a stock rooted rom before attempting to flash a new rom, simply download a stock rooted rom from the dev section, put it on your SD card, boot into recovery, wipe and reflash. Your phone should then boot up again.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
I have a stock ROM finally loaded on to here now, but it won't allow me access to Wifi now! When I try to connect it just says "error". Any ideas?
jerseybizzle said:
I have a stock ROM finally loaded on to here now, but it won't allow me access to Wifi now! When I try to connect it just says "error". Any ideas?
Click to expand...
Click to collapse
Here's an idea, get flash image GUI, its free here at xda, google it. Then use it to flash the kernel from the stock rom that you have running and reboot. This should fix your WiFi. Let me know if I'm not being clear enough.
wikdNoob said:
Here's an idea, get flash image GUI, its free here at xda, google it. Then use it to flash the kernel from the stock rom that you have running and reboot. This should fix your WiFi. Let me know if I'm not being clear enough.
Click to expand...
Click to collapse
Where would I find the stock Kernel?
jerseybizzle said:
I have a stock ROM finally loaded on to here now, but it won't allow me access to Wifi now! When I try to connect it just says "error". Any ideas?
Click to expand...
Click to collapse
So, it sounds like wifi turns on just fine, you just get the error when attempting to connect to a network?
Have you tried resetting your router and rebooting your phone? Maybe remove that network from your saved preferences and resign in.
Sent from my PG86100 using xda app-developers app
jerseybizzle said:
Where would I find the stock Kernel?
Click to expand...
Click to collapse
Inside the rom that you flashed, just choose that rom with flash image GUI and it'll pull the kernel out for you
flonker said:
So, it sounds like wifi turns on just fine, you just get the error when attempting to connect to a network?
Have you tried resetting your router and rebooting your phone? Maybe remove that network from your saved preferences and resign in.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
The wifi won't turn on period. I'll click the icon for the Wi-Fi to turn on, and it just says error. No option to even try to connect!
jerseybizzle said:
The wifi won't turn on period. I'll click the icon for the Wi-Fi to turn on, and it just says error. No option to even try to connect!
Click to expand...
Click to collapse
If the app that was suggested to didn't do the trick, hit the stickies in the dev section on how to flash a rom with hboot 1.5 S-ON. I recommend the fastboot method, however, if you're so inclined, you can also go the route of getting S-OFF.
Most likely, some problems occurred when you tried to flash that ROM before and broke your wifi. So, if I were you, I'd grab a ROM (that viper ics should be fine if you still got it) and flash it through fastboot using a guide in the dev section. Be sure to read and understand the guide before attempting it.
The guide would be something like this...
1. Install the appropriate drivers and place a recovery on your PC.
2. Boot into your boot loader, select fast boot, and connect your device to your PC via USB.
3. Open a command prompt on your computer, switch to the directory containing drivers/recovery image
4. Type fastboot boot thenameofyourrecovery.img
5. Install the rom as you otherwise normally would using your phone, wiping data, clearing caches, installing zip.
NOTE: The above is not a guide, just an illustration of the guide you're looking for in the dev section.
Flashing a rom by this method allows you to flash roms with non stock kernels, so you can pretty much flash any rom made for your phone. This is the method I have used since day 1 and have never experienced any problems. You may also want to look into getting S-OFF, but I can't say much about that because I haven't done it myself (being content flashing through fastboot).
Hope this helps.
Sent from my PG86100 using xda app-developers app
flonker said:
If the app that was suggested to didn't do the trick, hit the stickies in the dev section on how to flash a rom with hboot 1.5 S-ON. I recommend the fastboot method, however, if you're so inclined, you can also go the route of getting S-OFF.
Most likely, some problems occurred when you tried to flash that ROM before and broke your wifi. So, if I were you, I'd grab a ROM (that viper ics should be fine if you still got it) and flash it through fastboot using a guide in the dev section. Be sure to read and understand the guide before attempting it.
The guide would be something like this...
1. Install the appropriate drivers and place a recovery on your PC.
2. Boot into your boot loader, select fast boot, and connect your device to your PC via USB.
3. Open a command prompt on your computer, switch to the directory containing drivers/recovery image
4. Type fastboot boot thenameofyourrecovery.img
5. Install the rom as you otherwise normally would using your phone, wiping data, clearing caches, installing zip.
NOTE: The above is not a guide, just an illustration of the guide you're looking for in the dev section.
Flashing a rom by this method allows you to flash roms with non stock kernels, so you can pretty much flash any rom made for your phone. This is the method I have used since day 1 and have never experienced any problems. You may also want to look into getting S-OFF, but I can't say much about that because I haven't done it myself (being content flashing through fastboot).
Hope this helps.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Thanks. I ended up finally finding a ROM (CM) that would load on to the phone. The Wi-Fi is working now!
I just need to find a fix for the camera, neither the regular nor 3D camera will function now.
jerseybizzle said:
Thanks. I ended up finally finding a ROM (CM) that would load on to the phone. The Wi-Fi is working now!
I just need to find a fix for the camera, neither the regular nor 3D camera will function now.
Click to expand...
Click to collapse
Which cm rom exactly? I thought the camera works with all the cm roms. It sounds like you still have kernel issues, and until you figure out how to flash a kernel or boot image, you'll always have these types of issues, bootloop, broken WiFi/camera. I know that the instructions that flonker gave you are intimidating but after you've done it once you'll see how simple it is.
One limitation of HTC dev unlocking is that you can't write to the boot partition from recovery, the kernel resides in the boot partition. You can, however, write to boot from within the android system. That's why flash image GUI is so handy for people with s-on and HTC dev unlocked. Just open the app, find the rom you'd like to flash and select it, the GUI will extract the kernel from the rom zip and flash it. Then you just boot into recovery and flash the same rom that you selected with the GUI. It'll flash everything but the boot image, but that's ok because you already flashed the kernel with flash image GUI. Make sure you do a factory reset and wipe the dalvik cache.
When I was s-on I always chose fastbooting to recovery, when you do that it actually loads the recovery onto the boot partition and gives you permission to write to boot, so its like flashing should be. Just wipe, flash, enjoy.
Hope this helps.
Wikd said:
Which cm rom exactly? I thought the camera works with all the cm roms. It sounds like you still have kernel issues, and until you figure out how to flash a kernel or boot image, you'll always have these types of issues, bootloop, broken WiFi/camera. I know that the instructions that flonker gave you are intimidating but after you've done it once you'll see how simple it is.
One limitation of HTC dev unlocking is that you can't write to the boot partition from recovery, the kernel resides in the boot partition. You can, however, write to boot from within the android system. That's why flash image GUI is so handy for people with s-on and HTC dev unlocked. Just open the app, find the rom you'd like to flash and select it, the GUI will extract the kernel from the rom zip and flash it. Then you just boot into recovery and flash the same rom that you selected with the GUI. It'll flash everything but the boot image, but that's ok because you already flashed the kernel with flash image GUI. Make sure you do a factory reset and wipe the dalvik cache.
When I was s-on I always chose fastbooting to recovery, when you do that it actually loads the recovery onto the boot partition and gives you permission to write to boot, so its like flashing should be. Just wipe, flash, enjoy.
Hope this helps.
Click to expand...
Click to collapse
I have been flashing roms and kernels and such for awhile on several different phones and literally almost everything you said makes no sense and that goes for the other guy 2 posts above yours. WTF is flash image GUI? Is that an app, you never even say.
The other guy is telling him to flash a rom but describes to him how to flash a recovery image to his phone...have you guys ever done this before or are you just making stuff up as you go?
flukeSG2 said:
I have been flashing roms and kernels and such for awhile on several different phones and literally almost everything you said makes no sense and that goes for the other guy 2 posts above yours. WTF is flash image GUI? Is that an app, you never even say.
The other guy is telling him to flash a rom but describes to him how to flash a recovery image to his phone...have you guys ever done this before or are you just making stuff up as you go?
Click to expand...
Click to collapse
Those guys probably don't even have EVO 3D's anymore. Do you read dates before posting? Threads a year old :screwy:
Sent from my PG86100 using xda app-developers app
RayTrue04 said:
Those guys probably don't even have EVO 3D's anymore. Do you read dates before posting? Threads a year old :screwy:
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Yes I do, I was looking for information and I read the entire thread. Just because they posted it a year ago doesn't make the info any less wrong.
tried installing latest version of cyanogen using clock work recovery, froze at white htc menu. now rebooting using my recovery i backed up and its still loading files after 1 hour. if i ever get my phone working again what rom or method on installing rom should i use, i always used clockwork on my other phones with no prob.
Alpinestars96 said:
tried installing latest version of cyanogen using clock work recovery, froze at white htc menu. now rebooting using my recovery i backed up and its still loading files after 1 hour. if i ever get my phone working again what rom or method on installing rom should i use, i always used clockwork on my other phones with no prob.
Click to expand...
Click to collapse
Are you S-Off or S-On?
Ps. I'm not a fan of CWM. I've used TWRP mostly, and I love it, although a lot of people still swear by Amon Ra
do yourself a HUGE favor and just flash Amon RA 3.15....TWRP has come a long long way but by far the most reliable recovery is amon, hopefully that solves your issues
How do I flash using aromna? Also where do I get it?
Alpinestars96 said:
How do I flash using aromna? Also where do I get it?
Click to expand...
Click to collapse
check the link:▼▼▼
http://www.droidforums.net/forum/ht...05839-guide-unlocking-rooting-roming-faq.html
also the latest version of Amon Ra can be found here: ▼▼▼ remember to unzip the file before flashing
http://forum.xda-developers.com/showpost.php?p=23890117&postcount=523
Curious:
What ROM are you trying to flash. Some ROMs have custom kernels, and if you are S-on they will not be able to flash from recovery. You will need to flash them from fastboot/hboot. That would cause the ROM not to boot properly if you did not have the right kernel.
Ok, I unlocked the bootloader on the 3d and then installed ext4. i then threw on negalites rom, booted, and had no wifi or 4g capabilities.
so i did some research....came to negalites website where they say to flash the butteredtoast kernel, then re-install negalite rom with aurora.
ok...so i did that, installed the kernel, re-installed negalite, annnnnnd still no 4g/wifi. i tried this several times. wiped caches, etc.
so then i decided "well screw this, i'll just try a different rom to see if wifi/4g work" so i decided to go back towards cyanogenmods wild in the night. so i transfer the cm zip to sd, and try to flash it....but i get an error aborted?! wtf?? i thought i unlocked the bootloader....and could flash what i wanted here.
so i tried flashing the pacman rom, that aborted as well. it seems any ROM other than negalites will not install. what gives?
So questions:
1. Is there a way to fix the negalite rom to get 4g and wifi working? anything else i can try at all?
2. why can't i flash any other roms? do i need to use TWRP instead? do i need to regress to a different rom or kernel?
Hellllpppppp!!!!
edit- this phone also is S-ON still if that matters at all
First flash Rom.zip
Then flash kernel
Also find smartflash setting in 4ext and make sure its enabled.
If you are not s off, you cannot flash anything but stock based ics, that's why you were getting errors. You need to change your hboot to flash those, and you need s off to change hboot
Sent from my PG86100 using xda app-developers app
hossman said:
Also find smartflash setting in 4ext and make sure its enabled.
Click to expand...
Click to collapse
this fixed everything with negalite. thank you.
I'm not necessarily new to rooting I've been doing it for a year or so on my old phone. But after upgrading I decided not to root for a while. Now I think I'm ready to root and get a custom rom on. I'm not used to the whole unlocking bootloader and then a different way of rooting from my old phone. Any sort of guide with links would be greatly appreciated!
Sent from my HTC6435LVW using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=2314771
Get some moonshine.
Sent from my HTC6435LVW using Tapatalk 4
just thought i'd add something
you need s-off because verizon or htc stopped allowing the dna to unlock its bootloader from their htcdev site
once s-off you can flash any rom, kernel or recovery
you do not need to unlock your bootloader
the link i found was dead so here is cwm touch recovery that i use http://s000.tinyupload.com/index.php?file_id=17561816589933340240
I think every rom available is already rooted so thats taken care of
i just read some of the guides that are up and they are outdated, so ask anythting you need here and ill help
OK sorry about that I meant s-off. So I do moonshine flash cwm and then do I have to install super user?
Sent from my HTC6435LVW using xda app-developers app
nope all the roms are pre rooted with SU or superSU
but in case im wrong and you find a rom without root you can flash SU or superSU from recovery
hit "thanks" plx
simplified steps are:
1. s-off
2. flash recovery through adb
3. put the rom or rom and kernel you want on the phone and flash it in the recovery
thats it. its a bit simpler than most phones i think, especially samsungs as i just found out.
Step 1. S-off via Moonshine.
Step 2. Flash a recovery. I think the absolute easiest way is using this toolkit. This toolkit couldn't get any easier to use.
http://forum.xda-developers.com/showthread.php?t=2219175
Step 3. Flash whatever ROM you choose. I personally love ViperDNA.
Does moonshining wipe your data?
Sent from my HTC6435LVW using xda app-developers app
Nope... but sometimes the moonshine process will have problems that are typically resolved by doing a factory wipe, in order to sucessfully do the process.
OK now I'm coming from a Samsung device so it was a lot harder than this. My question is if I have to wipe data before flashing a rom or a recovery? I would also like to know what the adb is.
Sent from my HTC6435LVW using xda app-developers app
maceprimus said:
OK now I'm coming from a Samsung device so it was a lot harder than this. My question is if I have to wipe data before flashing a rom or a recovery? I would also like to know what the adb is.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
once you have the recovery installed you can choose "factory reset/wipe data" from the cwm menu along with wipe cache, also dalvik cache in the advanced menu in cwm, i do this before i flash any rom
ADB is how you flash a recovery and some kernels
but you need this driver installed http://www.htc.com/www/software/htc-sync-manager/?section=Requirement
you also need that driver installed for moonshine to work but after you install it you need to remove the htc sync manager part of it
http://forum.xda-developers.com/showthread.php?p=42407269
here is a small adb and fastboot setup
once installed you can put the cwm recovery in the same folder as adb open a cmd window and from the directory that has adb and the cwm you type
"adb reboot bootloader" no quotes
then
"fastboot flash boot clockwork-touch,img"
now you have recovery
I realize these instructions assume some levels of knowledge so if you need more details ask
I have done all you said and now have a rooted dna! the only problem is every time I select reboot from the cwm it just reboots to the recovery and not the actual phone? Any Idea of whats going on here?
ah it sounds like you wiped your rom before you transferred a new one to your phone
did you do a backup of your stock rom?
this recovery isnt perfect i dont think you can mount the sd card in it to transfer files
if you have no backup and no rom package on your phone and you wiped your stock installed rom then ive actually never come into this situation
im sure it can be resolved easily, let me test some stuff on my phone ill get back to you in a bit.
in the meantime does anyone else have any suggestion for this?
maybe team win recovery can mount sd?
hyphydragon said:
ah it sounds like you wiped your rom before you transferred a new one to your phone
did you do a backup of your stock rom?
this recovery isnt perfect i dont think you can mount the sd card in it to transfer files
if you have no backup and no rom package on your phone and you wiped your stock installed rom then ive actually never come into this situation
im sure it can be resolved easily, let me test some stuff on my phone ill get back to you in a bit.
in the meantime does anyone else have any suggestion for this?
maybe team win recovery can mount sd?
Click to expand...
Click to collapse
I did not make a backup and I don't have any roms on the phone. I'm not exactly sure of how all this happened and I would really like to get everything worked out.
ok you can install the TWRP recovery and sideload the rom
you can google the info about how to do it, i dont know much about sideload
here is the TWRP recovery, flash it the same way as the other
http://techerrata.com/file/twrp2/dlx/openrecovery-twrp-2.6.0.0-dlx.img
info about sideloading http://teamw.in/ADBSideload
have you decided on a rom yet? id recommend a sense5 like digital dream or BAMF by joelz, thats what ive ran for a while now
if you want to get this done in a more timely manner you can chat me on skype its bigvtec916
hyphydragon said:
ok you can install the TWRP recovery and sideload the rom
you can google the info about how to do it, i dont know much about sideload
here is the TWRP recovery, flash it the same way as the other
http://techerrata.com/file/twrp2/dlx/openrecovery-twrp-2.6.0.0-dlx.img
Click to expand...
Click to collapse
It seems as if I can sideload from cwm as well. And how could I install the twrp recovery if I cant boot into the desktop
I would like to either install a sense 5 rom like you suggested or cyanogen mod. Im not so sure how to flash the twrp recovery if im only in the cwm recovery.
you can hold power and vol down, once it reboots after about 10 sec you let go of power and keep holding vol down till you see the bootloader screen, you can flash the recovery using adb like you did to get cwm on
ok never mind I figured out how to get the twrp flashed. now I will try to sideload
I would like to skype but I didnt build my pc with a camcorder. I can still do sound though, tell me if your okay with that. Ok now when I try to sideload it tells me that it cant find the device? not sure what that is.
i was just going to skype for chatting with text so its not like post and wait and refresh, takes forever
in the recovery there is a setting you activate to sideload you are using that right?