Evo 3d won't boot past HTC screen - HTC EVO 3D

Hello,
I've been all over google and this site for the last two days trying to find a way to get my Evo 3d work! I tried searching the forum and unfortunately i kept getting server errors So i figured I would make a new thread in the hopes of figuring this out!
What happened:
I went through the rooting process, and I went to flash a ROM on to the phone and it would not load pass the HTC screen. I had a ROM on there of the stock version of the Sprint Evo 3d, unfortunately it wasn't the proper version and it did not allow 4G and such. So i tried to place another ROM on to the SD Card and flash it over, and for some dumb reason, I deleted the version of the Stock Rom that atleast enabled me to get the phone to turn all the way on. All I'm able now is to boot up to recovery, but I can't figure out what ROM to download to place on the phone to get me back to square one!!!
Help please!!
-Mike

---

jerseybizzle said:
Hello,
I've been all over google and this site for the last two days trying to find a way to get my Evo 3d work! I tried searching the forum and unfortunately i kept getting server errors So i figured I would make a new thread in the hopes of figuring this out!
What happened:
I went through the rooting process, and I went to flash a ROM on to the phone and it would not load pass the HTC screen. I had a ROM on there of the stock version of the Sprint Evo 3d, unfortunately it wasn't the proper version and it did not allow 4G and such. So i tried to place another ROM on to the SD Card and flash it over, and for some dumb reason, I deleted the version of the Stock Rom that atleast enabled me to get the phone to turn all the way on. All I'm able now is to boot up to recovery, but I can't figure out what ROM to download to place on the phone to get me back to square one!!!
Help please!!
-Mike
Click to expand...
Click to collapse
Hi jerseybizzle, I can certainly try to help you but you have to help me first.
1. Are you doing a factory reset and wiping dalvik cache before flashing?
2. What hboot version do you have?
3. Is your phone s-on or s-off?
4. Which rom did you try to flash that wouldn't boot?

---

wikdNoob said:
Hi jerseybizzle, I can certainly try to help you but you have to help me first.
1. Are you doing a factory reset and wiping dalvik cache before flashing?
2. What hboot version do you have?
3. Is your phone s-on or s-off?
4. Which rom did you try to flash that wouldn't boot?
Click to expand...
Click to collapse
1. Yes
2. 1.50
3. My phone says S-on but I have super user privileges and the guide I followed said I have the phone rooted whether or not it said S-Off or S-On.
4. I believe it was the ViperMod

---

jerseybizzle said:
1. Yes
2. 1.50
3. My phone says S-on but I have super user privileges and the guide I followed said I have the phone rooted whether or not it said S-Off or S-On.
4. I believe it was the ViperMod
Click to expand...
Click to collapse
If it was an ics Rom and you are having bootloops, it is most likely because you are s-on. I recommend getting s-off. The wire trick is easy to do, but you need to be careful.
http://forum.xda-developers.com/showthread.php?t=1585846
Sent from my ICS 3VO with Tapatalk 2

---

Did you flash the rom through fastboot? If you just booted into your recovery and attempted to flash the ICS version of that rom coming from GB it won't work since you still have S-ON and that doesn't let you flash certain things like kernels. You can still flash roms but you have to take a couple extra steps or achieve S-OFF.
To get your phone working again...
If you were just coming from a stock rooted rom before attempting to flash a new rom, simply download a stock rooted rom from the dev section, put it on your SD card, boot into recovery, wipe and reflash. Your phone should then boot up again.
Sent from my PG86100 using xda app-developers app

---

jerseybizzle said:
1. Yes
2. 1.50
3. My phone says S-on but I have super user privileges and the guide I followed said I have the phone rooted whether or not it said S-Off or S-On.
4. I believe it was the ViperMod
Click to expand...
Click to collapse
I'm guessing it was the ics version of vipermod, and since you're s-on your boot image didn't flash. So you're trying to boot an ics rom with a gingerbread kernel.
If you want to use an ics rom, you have a few choices. My favorite... Put a recovery image in the folder on your computer that has fastboot in it. Put the phone in fastboot mode and type in the command window, fastboot boot recovery.img, make sure that you name the recovery image on your comp. to "recovery.img". It should boot to recovery and you can flash away.
Something that's easier is to use 4ext recovery smart flash. I'm sure it works but I've never used it.
If you want to get back to your stock rom unrooted rom you could run an ruu.
Also, take coals advice and s-off that phone, you won't have nearly as many issues once you s-off, and you can use one of the splash screens in my Sig

---

flonker said:
Did you flash the rom through fastboot? If you just booted into your recovery and attempted to flash the ICS version of that rom coming from GB it won't work since you still have S-ON and that doesn't let you flash certain things like kernels. You can still flash roms but you have to take a couple extra steps or achieve S-OFF.
To get your phone working again...
If you were just coming from a stock rooted rom before attempting to flash a new rom, simply download a stock rooted rom from the dev section, put it on your SD card, boot into recovery, wipe and reflash. Your phone should then boot up again.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
I have a stock ROM finally loaded on to here now, but it won't allow me access to Wifi now! When I try to connect it just says "error". Any ideas?

---

jerseybizzle said:
I have a stock ROM finally loaded on to here now, but it won't allow me access to Wifi now! When I try to connect it just says "error". Any ideas?
Click to expand...
Click to collapse
Here's an idea, get flash image GUI, its free here at xda, google it. Then use it to flash the kernel from the stock rom that you have running and reboot. This should fix your WiFi. Let me know if I'm not being clear enough.

---

wikdNoob said:
Here's an idea, get flash image GUI, its free here at xda, google it. Then use it to flash the kernel from the stock rom that you have running and reboot. This should fix your WiFi. Let me know if I'm not being clear enough.
Click to expand...
Click to collapse
Where would I find the stock Kernel?

---

jerseybizzle said:
I have a stock ROM finally loaded on to here now, but it won't allow me access to Wifi now! When I try to connect it just says "error". Any ideas?
Click to expand...
Click to collapse
So, it sounds like wifi turns on just fine, you just get the error when attempting to connect to a network?
Have you tried resetting your router and rebooting your phone? Maybe remove that network from your saved preferences and resign in.
Sent from my PG86100 using xda app-developers app

---

jerseybizzle said:
Where would I find the stock Kernel?
Click to expand...
Click to collapse
Inside the rom that you flashed, just choose that rom with flash image GUI and it'll pull the kernel out for you

---

flonker said:
So, it sounds like wifi turns on just fine, you just get the error when attempting to connect to a network?
Have you tried resetting your router and rebooting your phone? Maybe remove that network from your saved preferences and resign in.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
The wifi won't turn on period. I'll click the icon for the Wi-Fi to turn on, and it just says error. No option to even try to connect!

---

jerseybizzle said:
The wifi won't turn on period. I'll click the icon for the Wi-Fi to turn on, and it just says error. No option to even try to connect!
Click to expand...
Click to collapse
If the app that was suggested to didn't do the trick, hit the stickies in the dev section on how to flash a rom with hboot 1.5 S-ON. I recommend the fastboot method, however, if you're so inclined, you can also go the route of getting S-OFF.
Most likely, some problems occurred when you tried to flash that ROM before and broke your wifi. So, if I were you, I'd grab a ROM (that viper ics should be fine if you still got it) and flash it through fastboot using a guide in the dev section. Be sure to read and understand the guide before attempting it.
The guide would be something like this...
1. Install the appropriate drivers and place a recovery on your PC.
2. Boot into your boot loader, select fast boot, and connect your device to your PC via USB.
3. Open a command prompt on your computer, switch to the directory containing drivers/recovery image
4. Type fastboot boot thenameofyourrecovery.img
5. Install the rom as you otherwise normally would using your phone, wiping data, clearing caches, installing zip.
NOTE: The above is not a guide, just an illustration of the guide you're looking for in the dev section.
Flashing a rom by this method allows you to flash roms with non stock kernels, so you can pretty much flash any rom made for your phone. This is the method I have used since day 1 and have never experienced any problems. You may also want to look into getting S-OFF, but I can't say much about that because I haven't done it myself (being content flashing through fastboot).
Hope this helps.
Sent from my PG86100 using xda app-developers app

---

flonker said:
If the app that was suggested to didn't do the trick, hit the stickies in the dev section on how to flash a rom with hboot 1.5 S-ON. I recommend the fastboot method, however, if you're so inclined, you can also go the route of getting S-OFF.
Most likely, some problems occurred when you tried to flash that ROM before and broke your wifi. So, if I were you, I'd grab a ROM (that viper ics should be fine if you still got it) and flash it through fastboot using a guide in the dev section. Be sure to read and understand the guide before attempting it.
The guide would be something like this...
1. Install the appropriate drivers and place a recovery on your PC.
2. Boot into your boot loader, select fast boot, and connect your device to your PC via USB.
3. Open a command prompt on your computer, switch to the directory containing drivers/recovery image
4. Type fastboot boot thenameofyourrecovery.img
5. Install the rom as you otherwise normally would using your phone, wiping data, clearing caches, installing zip.
NOTE: The above is not a guide, just an illustration of the guide you're looking for in the dev section.
Flashing a rom by this method allows you to flash roms with non stock kernels, so you can pretty much flash any rom made for your phone. This is the method I have used since day 1 and have never experienced any problems. You may also want to look into getting S-OFF, but I can't say much about that because I haven't done it myself (being content flashing through fastboot).
Hope this helps.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Thanks. I ended up finally finding a ROM (CM) that would load on to the phone. The Wi-Fi is working now!
I just need to find a fix for the camera, neither the regular nor 3D camera will function now.

---

jerseybizzle said:
Thanks. I ended up finally finding a ROM (CM) that would load on to the phone. The Wi-Fi is working now!
I just need to find a fix for the camera, neither the regular nor 3D camera will function now.
Click to expand...
Click to collapse
Which cm rom exactly? I thought the camera works with all the cm roms. It sounds like you still have kernel issues, and until you figure out how to flash a kernel or boot image, you'll always have these types of issues, bootloop, broken WiFi/camera. I know that the instructions that flonker gave you are intimidating but after you've done it once you'll see how simple it is.
One limitation of HTC dev unlocking is that you can't write to the boot partition from recovery, the kernel resides in the boot partition. You can, however, write to boot from within the android system. That's why flash image GUI is so handy for people with s-on and HTC dev unlocked. Just open the app, find the rom you'd like to flash and select it, the GUI will extract the kernel from the rom zip and flash it. Then you just boot into recovery and flash the same rom that you selected with the GUI. It'll flash everything but the boot image, but that's ok because you already flashed the kernel with flash image GUI. Make sure you do a factory reset and wipe the dalvik cache.
When I was s-on I always chose fastbooting to recovery, when you do that it actually loads the recovery onto the boot partition and gives you permission to write to boot, so its like flashing should be. Just wipe, flash, enjoy.
Hope this helps.

---

Wikd said:
Which cm rom exactly? I thought the camera works with all the cm roms. It sounds like you still have kernel issues, and until you figure out how to flash a kernel or boot image, you'll always have these types of issues, bootloop, broken WiFi/camera. I know that the instructions that flonker gave you are intimidating but after you've done it once you'll see how simple it is.
One limitation of HTC dev unlocking is that you can't write to the boot partition from recovery, the kernel resides in the boot partition. You can, however, write to boot from within the android system. That's why flash image GUI is so handy for people with s-on and HTC dev unlocked. Just open the app, find the rom you'd like to flash and select it, the GUI will extract the kernel from the rom zip and flash it. Then you just boot into recovery and flash the same rom that you selected with the GUI. It'll flash everything but the boot image, but that's ok because you already flashed the kernel with flash image GUI. Make sure you do a factory reset and wipe the dalvik cache.
When I was s-on I always chose fastbooting to recovery, when you do that it actually loads the recovery onto the boot partition and gives you permission to write to boot, so its like flashing should be. Just wipe, flash, enjoy.
Hope this helps.
Click to expand...
Click to collapse
I have been flashing roms and kernels and such for awhile on several different phones and literally almost everything you said makes no sense and that goes for the other guy 2 posts above yours. WTF is flash image GUI? Is that an app, you never even say.
The other guy is telling him to flash a rom but describes to him how to flash a recovery image to his phone...have you guys ever done this before or are you just making stuff up as you go?

---

flukeSG2 said:
I have been flashing roms and kernels and such for awhile on several different phones and literally almost everything you said makes no sense and that goes for the other guy 2 posts above yours. WTF is flash image GUI? Is that an app, you never even say.
The other guy is telling him to flash a rom but describes to him how to flash a recovery image to his phone...have you guys ever done this before or are you just making stuff up as you go?
Click to expand...
Click to collapse
Those guys probably don't even have EVO 3D's anymore. Do you read dates before posting? Threads a year old :screwy:
Sent from my PG86100 using xda app-developers app

---

RayTrue04 said:
Those guys probably don't even have EVO 3D's anymore. Do you read dates before posting? Threads a year old :screwy:
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Yes I do, I was looking for information and I read the entire thread. Just because they posted it a year ago doesn't make the info any less wrong.