OK... EVO LTE that I was able to unlock bootloader, but remained s=on because I did it after the update to 4.1 sense. I flashed a new rom and everything booted up fine, the phone allowed me to set all my accounts etc... I then realized that I could not get my WIFI or Camera to work, so I assumed that I had a bad flash, bad rom or something just didn't go right. So, I flashed the Miklatte rom... Everything seemed to go ok... but, same issue! When I would try and connect to WIFI it would error out... when I would try and use my camera, it would flash open for a quick second and close the camera app.
So, at this point I tried to clean the phone by wiping everything I could possibly wipe and do this all over again with a rom that I have read has working camera and WIFI for sure! So I downloaded the CleanRom De and tried to flash this one after wiping everything about 4 times. Then I ran into problems!!! I could no longer mount USB because it said I must format the drive... I ended up doing so because I thought that I bricked my phone! It allowed me to format and I placed the flash of CleanRom on there.... I was then able to install the rom! When I rebooted the phone after flashing rom, I now have CleanRom running... although... I now have no google apps or internet that work!! I thought it was strange that the phone did not ask me to add my accounts... so I tried adding my google account and it won't allow me to input any information.
What should I do??? I sincerely thank you in advance for any help you can provide!!
Can you make and receive phone calls?
Sent from my EVO using Tapatalk 2
so now I have downloaded the full rom of Viper and was able to successfully place the rom on the phone... I can boot to recovery and install zip, but it then restarts TWRP and hangs... any thoughts??? please help!!
neopolotin75 said:
Can you make and receive phone calls?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Neopolotin, I am not sure or not... While I was scramming to figure this all out... I began to try and install Viper... Now it's stuck here...
Thanks for helping!! Any thoughts?
Use fastboot to flash kernel or the flash image app. Viper's Kernel installer seems to fail for some reason
om4 said:
Use fastboot to flash kernel or the flash image app. Viper's Kernel installer seems to fail for some reason
Click to expand...
Click to collapse
I apologize... I'm not sure I understand what you mean by flashing kernel or the flash image app.... So does that mean I can download the image of viper? sorry I don't understand... Thank you again for any help!!
There is a flash image app for pc that will flash the kernel for you but I'm not too familiar with how to use it. It seems very easy from what other users say. You can extract the boot image from the Rom and put it in adbtools or SDK and open a command prompt in the folder, type fastboot flash boot boot.img.
om4 said:
There is a flash image app for pc that will flash the kernel for you but I'm not too familiar with how to use it. It seems very easy from what other users say. You can extract the boot image from the Rom and put it in adbtools or SDK and open a command prompt in the folder, type fastboot flash boot boot.img.
Click to expand...
Click to collapse
anyone have step by step instructions I can view to do this? I am stuck!!!! Need help bad!!
Thanks!
bw1969 said:
anyone have step by step instructions I can view to do this? I am stuck!!!! Need help bad!!
Thanks!
Click to expand...
Click to collapse
I am able to flash the boot.img from viper through sdk tools but once I reboot, the phone pauses on the HTC quietly brilliant splash screen... What am I missing here? The flash of the boot.img took like 2 seconds...
sending 'boot' (6188 KB)... OKAY [ 1.436s]
writing 'boot'... OKAY [ 1.432s]
finished. total time: 2.869s
Is there another step I should be doing??
That should be it, have you tried wiping cache and dalvik?
om4 said:
That should be it, have you tried wiping cache and dalvik?
Click to expand...
Click to collapse
Yeah I have tried to wipe everything!! So bizarre... I am to the point now where I just want a working phone... UGH!!!!!!!!!
You could try meanrom instead, I switched to viper and had a similar bootloop with no access to a pc. I still had meanrom so I flashed back, installed flash GUI and used it to flash viper kernel and then flashed everything else, that seemed to work
om4 said:
You could try meanrom instead, I switched to viper and had a similar bootloop with no access to a pc. I still had meanrom so I flashed back, installed flash GUI and used it to flash viper kernel and then flashed everything else, that seemed to work
Click to expand...
Click to collapse
now I am even unable to boot into TWRP... the phone just shuts down and reboots and hangs again on the HTC splash screen...
Please HELP!!!!!!!
Hold power down until captiva lights flash and screen shuts off then immediately let go power and hold power and volume down til it boots into bootloader......go into recovery a flash a different rom following S-on instructions
Sent from my Transformer Prime TF201 using Tapatalk 2
neopolotin75 said:
Hold power down until captiva lights flash and screen shuts off then immediately let go power and hold power and volume down til it boots into bootloader......go into recovery a flash a different rom following S-on instructions
Sent from my Transformer Prime TF201 using Tapatalk 2
Click to expand...
Click to collapse
OK... I was able to get CleanRom DE installed.... It's running Apex so a little different... but my Camera and WIFI still won't work!
Have you tried a custom kernel
Sent from my Transformer Prime TF201 using Tapatalk 2
It still sounds like a kernel issue. What version of Hboot do you have?
neopolotin75 said:
Have you tried a custom kernel
Sent from my Transformer Prime TF201 using Tapatalk 2
Click to expand...
Click to collapse
Yeah I tried... but couldn't get the phone to boot... I feel lucky right now I have a phone that will at least make calls and take calls... But no WIFI and camera just bum me out!! I even tried the Sense Camera APK and it didn't work either...
bw1969 said:
Yeah I tried... but couldn't get the phone to boot... I feel lucky right now I have a phone that will at least make calls and take calls... But no WIFI and camera just bum me out!! I even tried the Sense Camera APK and it didn't work either...
Click to expand...
Click to collapse
Dude, u know with S-ON and hboot 1.15 up u need to flash kernel separately for the rom to work right right?
Try installing meanrom, it has the kernel auto-installer. Or use flashGUI(app from playstore) to flash kernels with other roms.
Anthonicia said:
Dude, u know with S-ON and hboot 1.15 up u need to flash kernel separately for the rom to work right right?
Try installing meanrom, it has the kernel auto-installer. Or use flashGUI(app from playstore) to flash kernels with other roms.
Click to expand...
Click to collapse
Thank you Bro!! I am downloading MeanRom now and will follow the great descriptive directions listed on this site! Thank you again for the heads up and learning lesson about S-ON and hboot... I will let you know how this goes...
Related
I am s-off and using the latest 4ext recovery. I upgraded from revolutionary CMW to 4ext so i could try CM9. It was alright but nothing special. Afterwards i tried to update to the latest vitrous sense 4.0 rom and i couldn't get past with the boot animation. Every single ROM i tried has been like this. Im wiping the data before I flash and using supewipe.zip. I never faced issue with CMW is it the recovery or am i doing something wrong?
UnderZone7 said:
I am s-off and using the latest 4ext recovery. I upgraded from revolutionary CMW to 4ext so i could try CM9. It was alright but nothing special. Afterwards i tried to update to the latest vitrous sense 4.0 rom and i couldn't get past with the boot animation. Every single ROM i tried has been like this. Im wiping the data before I flash and using supewipe.zip. I never faced issue with CMW is it the recovery or am i doing something wrong?
Click to expand...
Click to collapse
have you tried using the app Flash GUI to install this ROM?
what is Flash GUI? and if its an app i cant boot into any roms right now. everything i try will only take me to the boot screen.
UnderZone7 said:
what is Flash GUI? and if its an app i cant boot into any roms right now. everything i try will only take me to the boot screen.
Click to expand...
Click to collapse
how long are you waitng at this boot screen... i know when i installed CM9 it took over 5 minutes at the boot screen to set it all up ... flash GUI is an app to flash roms from the phones ROM but you wont use that ...which part of the boot are you getting stuck at... the one with the CM9 logo and the rotating electric ? or at the first splash screen showing the htc logo?
wloftus said:
how long are you waitng at this boot screen... i know when i installed CM9 it took over 5 minutes at the boot screen to set it all up ... flash GUI is an app to flash roms from the phones ROM but you wont use that ...which part of the boot are you getting stuck at... the one with the CM9 logo and the rotating electric ? or at the first splash screen showing the htc logo?
Click to expand...
Click to collapse
Any rom i try to install in general wont work. They all take to their boot animations and then nothing i even let them try to boot untill my phone dies. I just tried flashing cm9 and that seems like the only rom which still works.
UnderZone7 said:
Any rom i try to install in general wont work. They all take to their boot animations and then nothing i even let them try to boot untill my phone dies. I just tried flashing cm9 and that seems like the only rom which still works.
Click to expand...
Click to collapse
have you tried extracting the boot.img file from your ROM and then manually flashing it? try MeanROM 2.3 as well its a new one that is ICS based and loads fairly fast ... atleast i had no issues with it...also on your first time boot make sure the phone is NOT plugged up to the data cable
i dont know if you know this but if you download the PG86IMG from Goo im you can put that on the root of your sd card which is the first thing you see when you click sd card you can run that from bootloader and reset the phone
I fixed the problem. I just had to use flash image gui.
UnderZone7 said:
I fixed the problem. I just had to use flash image gui.
Click to expand...
Click to collapse
Are you sure you are s-off? I ask because I have never seen anyone need Flash Image GUI who is.
Sent from my ICS 3VO with Tapatalk 2
coal686 said:
Are you sure you are s-off? I ask because I have never seen anyone need Flash Image GUI who is.
Sent from my ICS 3VO with Tapatalk 2
Click to expand...
Click to collapse
99% sure it says in my hboot I am. But is their any way to go back to revolutionary cwm i never had any problems with it.
UnderZone7 said:
99% sure it says in my hboot I am. But is their any way to go back to revolutionary cwm i never had any problems with it.
Click to expand...
Click to collapse
this one?
thats it but how do i flash it?
UnderZone7 said:
I am s-off and using the latest 4ext recovery. I upgraded from revolutionary CMW to 4ext so i could try CM9. It was alright but nothing special. Afterwards i tried to update to the latest vitrous sense 4.0 rom and i couldn't get past with the boot animation. Every single ROM i tried has been like this. Im wiping the data before I flash and using supewipe.zip. I never faced issue with CMW is it the recovery or am i doing something wrong?
Click to expand...
Click to collapse
4ext works great, under wipe, select wipe dalvich + cache, then the format all partitions(besides sd card) option near the bottom.
Then flash your Rom, by chance is 4extsmartflash on? That's for s on devices so turn it off if enabled, as you are s off.
Sent from my HTC EVO 3D X515m using Tapatalk 2
UnderZone7 said:
thats it but how do i flash it?
Click to expand...
Click to collapse
just to make it simple download the file ad rename it to recovery.img and move it to the same place the fastboot.exe is located... take your phone and boot into your hboot by holding volume down and then the power button.. scroll down to the fastboot option and press the power button... youll see the screen change and then plug your phone up to your computer you should see on your phone screen now the phrase "fastboot usb"... from there open up a ms-dos window and direct yourself to the directory with the fastboot.exe and recovery.img files.. then type in
fastboot flash recovery recovery.img
it should send and then write , when completed power your phone and then reboot into recovery and it should be then revclockmod version...and probs feel free to PM me
Happen before
This is something that happened me to me before, my problem was I erased a bunch of important stuff and tried to install a kernel using recovery. I'm on hboot 1.50 so yeah **** turn messy. But I unrooted, then re-rooted and used GUI to flash my kernel of any choice but ext to flash my rom. Revolutionary recovery doesn't work too good on my phone, so it also varies depending on recovery:fingers-crossed:, just word of advice do a factory reset+wipe dalvich cache(do it at least 2 times) and it has worked for me whenever I flash a new rom. Whenever you reboot give it some time and don't rush or press anything. Once your rom kicks in let it sit for at least a couple mins and then proceed with whatever you need to do. Hope this helps!
Hello,
I've been all over google and this site for the last two days trying to find a way to get my Evo 3d work! I tried searching the forum and unfortunately i kept getting server errors So i figured I would make a new thread in the hopes of figuring this out!
What happened:
I went through the rooting process, and I went to flash a ROM on to the phone and it would not load pass the HTC screen. I had a ROM on there of the stock version of the Sprint Evo 3d, unfortunately it wasn't the proper version and it did not allow 4G and such. So i tried to place another ROM on to the SD Card and flash it over, and for some dumb reason, I deleted the version of the Stock Rom that atleast enabled me to get the phone to turn all the way on. All I'm able now is to boot up to recovery, but I can't figure out what ROM to download to place on the phone to get me back to square one!!!
Help please!!
-Mike
jerseybizzle said:
Hello,
I've been all over google and this site for the last two days trying to find a way to get my Evo 3d work! I tried searching the forum and unfortunately i kept getting server errors So i figured I would make a new thread in the hopes of figuring this out!
What happened:
I went through the rooting process, and I went to flash a ROM on to the phone and it would not load pass the HTC screen. I had a ROM on there of the stock version of the Sprint Evo 3d, unfortunately it wasn't the proper version and it did not allow 4G and such. So i tried to place another ROM on to the SD Card and flash it over, and for some dumb reason, I deleted the version of the Stock Rom that atleast enabled me to get the phone to turn all the way on. All I'm able now is to boot up to recovery, but I can't figure out what ROM to download to place on the phone to get me back to square one!!!
Help please!!
-Mike
Click to expand...
Click to collapse
Hi jerseybizzle, I can certainly try to help you but you have to help me first.
1. Are you doing a factory reset and wiping dalvik cache before flashing?
2. What hboot version do you have?
3. Is your phone s-on or s-off?
4. Which rom did you try to flash that wouldn't boot?
wikdNoob said:
Hi jerseybizzle, I can certainly try to help you but you have to help me first.
1. Are you doing a factory reset and wiping dalvik cache before flashing?
2. What hboot version do you have?
3. Is your phone s-on or s-off?
4. Which rom did you try to flash that wouldn't boot?
Click to expand...
Click to collapse
1. Yes
2. 1.50
3. My phone says S-on but I have super user privileges and the guide I followed said I have the phone rooted whether or not it said S-Off or S-On.
4. I believe it was the ViperMod
jerseybizzle said:
1. Yes
2. 1.50
3. My phone says S-on but I have super user privileges and the guide I followed said I have the phone rooted whether or not it said S-Off or S-On.
4. I believe it was the ViperMod
Click to expand...
Click to collapse
If it was an ics Rom and you are having bootloops, it is most likely because you are s-on. I recommend getting s-off. The wire trick is easy to do, but you need to be careful.
http://forum.xda-developers.com/showthread.php?t=1585846
Sent from my ICS 3VO with Tapatalk 2
Did you flash the rom through fastboot? If you just booted into your recovery and attempted to flash the ICS version of that rom coming from GB it won't work since you still have S-ON and that doesn't let you flash certain things like kernels. You can still flash roms but you have to take a couple extra steps or achieve S-OFF.
To get your phone working again...
If you were just coming from a stock rooted rom before attempting to flash a new rom, simply download a stock rooted rom from the dev section, put it on your SD card, boot into recovery, wipe and reflash. Your phone should then boot up again.
Sent from my PG86100 using xda app-developers app
jerseybizzle said:
1. Yes
2. 1.50
3. My phone says S-on but I have super user privileges and the guide I followed said I have the phone rooted whether or not it said S-Off or S-On.
4. I believe it was the ViperMod
Click to expand...
Click to collapse
I'm guessing it was the ics version of vipermod, and since you're s-on your boot image didn't flash. So you're trying to boot an ics rom with a gingerbread kernel.
If you want to use an ics rom, you have a few choices. My favorite... Put a recovery image in the folder on your computer that has fastboot in it. Put the phone in fastboot mode and type in the command window, fastboot boot recovery.img, make sure that you name the recovery image on your comp. to "recovery.img". It should boot to recovery and you can flash away.
Something that's easier is to use 4ext recovery smart flash. I'm sure it works but I've never used it.
If you want to get back to your stock rom unrooted rom you could run an ruu.
Also, take coals advice and s-off that phone, you won't have nearly as many issues once you s-off, and you can use one of the splash screens in my Sig
flonker said:
Did you flash the rom through fastboot? If you just booted into your recovery and attempted to flash the ICS version of that rom coming from GB it won't work since you still have S-ON and that doesn't let you flash certain things like kernels. You can still flash roms but you have to take a couple extra steps or achieve S-OFF.
To get your phone working again...
If you were just coming from a stock rooted rom before attempting to flash a new rom, simply download a stock rooted rom from the dev section, put it on your SD card, boot into recovery, wipe and reflash. Your phone should then boot up again.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
I have a stock ROM finally loaded on to here now, but it won't allow me access to Wifi now! When I try to connect it just says "error". Any ideas?
jerseybizzle said:
I have a stock ROM finally loaded on to here now, but it won't allow me access to Wifi now! When I try to connect it just says "error". Any ideas?
Click to expand...
Click to collapse
Here's an idea, get flash image GUI, its free here at xda, google it. Then use it to flash the kernel from the stock rom that you have running and reboot. This should fix your WiFi. Let me know if I'm not being clear enough.
wikdNoob said:
Here's an idea, get flash image GUI, its free here at xda, google it. Then use it to flash the kernel from the stock rom that you have running and reboot. This should fix your WiFi. Let me know if I'm not being clear enough.
Click to expand...
Click to collapse
Where would I find the stock Kernel?
jerseybizzle said:
I have a stock ROM finally loaded on to here now, but it won't allow me access to Wifi now! When I try to connect it just says "error". Any ideas?
Click to expand...
Click to collapse
So, it sounds like wifi turns on just fine, you just get the error when attempting to connect to a network?
Have you tried resetting your router and rebooting your phone? Maybe remove that network from your saved preferences and resign in.
Sent from my PG86100 using xda app-developers app
jerseybizzle said:
Where would I find the stock Kernel?
Click to expand...
Click to collapse
Inside the rom that you flashed, just choose that rom with flash image GUI and it'll pull the kernel out for you
flonker said:
So, it sounds like wifi turns on just fine, you just get the error when attempting to connect to a network?
Have you tried resetting your router and rebooting your phone? Maybe remove that network from your saved preferences and resign in.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
The wifi won't turn on period. I'll click the icon for the Wi-Fi to turn on, and it just says error. No option to even try to connect!
jerseybizzle said:
The wifi won't turn on period. I'll click the icon for the Wi-Fi to turn on, and it just says error. No option to even try to connect!
Click to expand...
Click to collapse
If the app that was suggested to didn't do the trick, hit the stickies in the dev section on how to flash a rom with hboot 1.5 S-ON. I recommend the fastboot method, however, if you're so inclined, you can also go the route of getting S-OFF.
Most likely, some problems occurred when you tried to flash that ROM before and broke your wifi. So, if I were you, I'd grab a ROM (that viper ics should be fine if you still got it) and flash it through fastboot using a guide in the dev section. Be sure to read and understand the guide before attempting it.
The guide would be something like this...
1. Install the appropriate drivers and place a recovery on your PC.
2. Boot into your boot loader, select fast boot, and connect your device to your PC via USB.
3. Open a command prompt on your computer, switch to the directory containing drivers/recovery image
4. Type fastboot boot thenameofyourrecovery.img
5. Install the rom as you otherwise normally would using your phone, wiping data, clearing caches, installing zip.
NOTE: The above is not a guide, just an illustration of the guide you're looking for in the dev section.
Flashing a rom by this method allows you to flash roms with non stock kernels, so you can pretty much flash any rom made for your phone. This is the method I have used since day 1 and have never experienced any problems. You may also want to look into getting S-OFF, but I can't say much about that because I haven't done it myself (being content flashing through fastboot).
Hope this helps.
Sent from my PG86100 using xda app-developers app
flonker said:
If the app that was suggested to didn't do the trick, hit the stickies in the dev section on how to flash a rom with hboot 1.5 S-ON. I recommend the fastboot method, however, if you're so inclined, you can also go the route of getting S-OFF.
Most likely, some problems occurred when you tried to flash that ROM before and broke your wifi. So, if I were you, I'd grab a ROM (that viper ics should be fine if you still got it) and flash it through fastboot using a guide in the dev section. Be sure to read and understand the guide before attempting it.
The guide would be something like this...
1. Install the appropriate drivers and place a recovery on your PC.
2. Boot into your boot loader, select fast boot, and connect your device to your PC via USB.
3. Open a command prompt on your computer, switch to the directory containing drivers/recovery image
4. Type fastboot boot thenameofyourrecovery.img
5. Install the rom as you otherwise normally would using your phone, wiping data, clearing caches, installing zip.
NOTE: The above is not a guide, just an illustration of the guide you're looking for in the dev section.
Flashing a rom by this method allows you to flash roms with non stock kernels, so you can pretty much flash any rom made for your phone. This is the method I have used since day 1 and have never experienced any problems. You may also want to look into getting S-OFF, but I can't say much about that because I haven't done it myself (being content flashing through fastboot).
Hope this helps.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Thanks. I ended up finally finding a ROM (CM) that would load on to the phone. The Wi-Fi is working now!
I just need to find a fix for the camera, neither the regular nor 3D camera will function now.
jerseybizzle said:
Thanks. I ended up finally finding a ROM (CM) that would load on to the phone. The Wi-Fi is working now!
I just need to find a fix for the camera, neither the regular nor 3D camera will function now.
Click to expand...
Click to collapse
Which cm rom exactly? I thought the camera works with all the cm roms. It sounds like you still have kernel issues, and until you figure out how to flash a kernel or boot image, you'll always have these types of issues, bootloop, broken WiFi/camera. I know that the instructions that flonker gave you are intimidating but after you've done it once you'll see how simple it is.
One limitation of HTC dev unlocking is that you can't write to the boot partition from recovery, the kernel resides in the boot partition. You can, however, write to boot from within the android system. That's why flash image GUI is so handy for people with s-on and HTC dev unlocked. Just open the app, find the rom you'd like to flash and select it, the GUI will extract the kernel from the rom zip and flash it. Then you just boot into recovery and flash the same rom that you selected with the GUI. It'll flash everything but the boot image, but that's ok because you already flashed the kernel with flash image GUI. Make sure you do a factory reset and wipe the dalvik cache.
When I was s-on I always chose fastbooting to recovery, when you do that it actually loads the recovery onto the boot partition and gives you permission to write to boot, so its like flashing should be. Just wipe, flash, enjoy.
Hope this helps.
Wikd said:
Which cm rom exactly? I thought the camera works with all the cm roms. It sounds like you still have kernel issues, and until you figure out how to flash a kernel or boot image, you'll always have these types of issues, bootloop, broken WiFi/camera. I know that the instructions that flonker gave you are intimidating but after you've done it once you'll see how simple it is.
One limitation of HTC dev unlocking is that you can't write to the boot partition from recovery, the kernel resides in the boot partition. You can, however, write to boot from within the android system. That's why flash image GUI is so handy for people with s-on and HTC dev unlocked. Just open the app, find the rom you'd like to flash and select it, the GUI will extract the kernel from the rom zip and flash it. Then you just boot into recovery and flash the same rom that you selected with the GUI. It'll flash everything but the boot image, but that's ok because you already flashed the kernel with flash image GUI. Make sure you do a factory reset and wipe the dalvik cache.
When I was s-on I always chose fastbooting to recovery, when you do that it actually loads the recovery onto the boot partition and gives you permission to write to boot, so its like flashing should be. Just wipe, flash, enjoy.
Hope this helps.
Click to expand...
Click to collapse
I have been flashing roms and kernels and such for awhile on several different phones and literally almost everything you said makes no sense and that goes for the other guy 2 posts above yours. WTF is flash image GUI? Is that an app, you never even say.
The other guy is telling him to flash a rom but describes to him how to flash a recovery image to his phone...have you guys ever done this before or are you just making stuff up as you go?
flukeSG2 said:
I have been flashing roms and kernels and such for awhile on several different phones and literally almost everything you said makes no sense and that goes for the other guy 2 posts above yours. WTF is flash image GUI? Is that an app, you never even say.
The other guy is telling him to flash a rom but describes to him how to flash a recovery image to his phone...have you guys ever done this before or are you just making stuff up as you go?
Click to expand...
Click to collapse
Those guys probably don't even have EVO 3D's anymore. Do you read dates before posting? Threads a year old :screwy:
Sent from my PG86100 using xda app-developers app
RayTrue04 said:
Those guys probably don't even have EVO 3D's anymore. Do you read dates before posting? Threads a year old :screwy:
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Yes I do, I was looking for information and I read the entire thread. Just because they posted it a year ago doesn't make the info any less wrong.
Hey people, hopefully somebody can help me out. I have ROM manager installed, and when I try to use it it freezes at the Hat with hourglass circle.
It will boot into recovery, but whenever I push the power button on reboot, advanced, install zip, etc.. it just freezes.
Does anybody know how i can fix this, i have tried to reflash rom manager several times with their android app, but nothing fixes it.
I would like to install TWRP but i can't flash anything because my recovery doesn't work.
Please let me know, suggestions, THX.
currentsupply said:
Hey people, hopefully somebody can help me out. I have ROM manager installed, and when I try to use it it freezes at the Hat with hourglass circle.
It will boot into recovery, but whenever I push the power button on reboot, advanced, install zip, etc.. it just freezes.
Does anybody know how i can fix this, i have tried to reflash rom manager several times with their android app, but nothing fixes it.
I would like to install TWRP but i can't flash anything because my recovery doesn't work.
Please let me know, suggestions, THX.
Click to expand...
Click to collapse
Cwm doesn't work properly on the rezound. I would suggest either twrp or amon. All you need to do is fast boot flash the recovery in hboot
Sent from my ADR6425LVW using Xparent SkyBlue Tapatalk 2
Yeah, let me spend half my day trying to figure out how to do that...
currentsupply said:
Yeah, let me spend half my day trying to figure out how to do that...
Click to expand...
Click to collapse
Easy fix bud I could help ya. I'm assuming you have the ADB tools installed? You needed it to unlock your bootloader.
sent from my s-on reZound rockin viperRez Rom on latest ICS firmware
If you are boot loader unlocked (I assume you are because you are talking about recovery), flash the PH98IMG.zip attached to the OP in this thread: http://forum.xda-developers.com/showthread.php?t=1339679
Stick it on the root of your external SD and reboot bootloader.
That will install amon ra without fast boot. Super easy.
GrayTheWolf said:
If you are boot loader unlocked (I assume you are because you are talking about recovery), flash the PH98IMG.zip attached to the OP in this thread: http://forum.xda-developers.com/showthread.php?t=1339679
Stick it on the root of your external SD and reboot bootloader.
That will install amon ra without fast boot. Super easy.
Click to expand...
Click to collapse
Fastboot is just as easy an its useful to know. But greythewolfs way would be better if your not comfortable with adb commands.
sent from my s-on reZound rockin viperRez Rom on latest ICS firmware
currentsupply said:
Yeah, let me spend half my day trying to figure out how to do that...
Click to expand...
Click to collapse
Maybe you should do a little more to educate yourself before doing things to a 600 dollar device. The cwm problems are talked about in numerous posts just like yours. I'm sorry I didn't do all the work for you and give you the links but if you're going to mod a device then you should at least have a little knowledge about it
Sent from my ADR6425LVW using Xparent SkyBlue Tapatalk 2
Hello everyone. Im trying to install CS 3.0 on my phone and its stuck at the cyanogen mod boot screen. I have wipe, wipe and rewiped and still the same results. I was on ICS RUU and everything was ok. Any ideas of what i can try?
clmowers said:
Hello everyone. Im trying to install CS 3.0 on my phone and its stuck at the cyanogen mod boot screen. I have wipe, wipe and rewiped and still the same results. I was on ICS RUU and everything was ok. Any ideas of what i can try?
Click to expand...
Click to collapse
S-ON? S-OFF? If you're S-On make sure you're selecting the option in Aroma installer for S-On that will write PH98IMG to SD for installation.
clmowers said:
Hello everyone. Im trying to install CS 3.0 on my phone and its stuck at the cyanogen mod boot screen. I have wipe, wipe and rewiped and still the same results. I was on ICS RUU and everything was ok. Any ideas of what i can try?
Click to expand...
Click to collapse
Can you get a logcat of it?
For me, it kept saying that all the system services were dying.
Sent from my HTC Rezound using Tapatalk 2
@clmowers
Try a rom flash without gapps after data/system wipe. Won't need to reflash your boot.img.
fo0you said:
S-ON? S-OFF? If you're S-On make sure you're selecting the option in Aroma installer for S-On that will write PH98IMG to SD for installation.
Click to expand...
Click to collapse
What the OP is experiencing isn't a boot.img issue.
Snuzzo said:
@clmowers
Try a rom flash without gapps after data/system wipe. Won't need to reflash your boot.img.
What the OP is experiencing isn't a boot.img issue.
Click to expand...
Click to collapse
I was also having a similar issue.
Interestingly, it would only happen after I restored my apps in System Tuner (coming from cm10).
First all the system processes would force close, and after a reboot, a logcat said that all the processes were dying.
Sent from my HTC Rezound using Tapatalk 2
Yeah see, I don't ever restore system apps and never have a problem with any rom/kernel combination.
clmowers said:
Hello everyone. Im trying to install CS 3.0 on my phone and its stuck at the cyanogen mod boot screen. I have wipe, wipe and rewiped and still the same results. I was on ICS RUU and everything was ok. Any ideas of what i can try?
Click to expand...
Click to collapse
sounds like you are s=on and didnt pull the boot.img and flash with adb?
synisterwolf said:
sounds like you are s=on and didnt pull the boot.img and flash with adb?
Click to expand...
Click to collapse
Wouldn't get to the boot ani if the boot.img wasn't flashed.
He was probably having a similar issue as mine.
Sent from my HTC Rezound using Tapatalk 2
You know i was having the same problem with an earlier version of counter shrike but i was on GB Firmware. I installed it without the GB Patch accidentally and it worked fine! Dunno if this will help.
Hey all sorry for the delay in response. Never got the notification. What the problem was is I am s-on and I wasn't removing the boot.img from the ROM. Once I did that and flashed it. It booted
Sent from my Rezound using Tapatalk 2
Hello, so recently I tried to get S-OFF on my Evo through JuopunutBear. Something went wrong and I (mistakenly ) unlplugged the USB cable. Now my phone only boots up onto Bootloader. I can't access the recovery nor can I access adb. The only thing that works is fastboot. Can someone please help me? I have no idea what to do and after hours of searching, nothing like this has ever happened before I assume. I'm sort of a noob. I have adb installed and can use it but I don't know what commands to enter or what files to download or what. Is there any way I can reset my phone or get out of this bootloop? Thank You guys!
duscdragon said:
Hello, so recently I tried to get S-OFF on my Evo through JuopunutBear. Something went wrong and I (mistakenly ) unlplugged the USB cable. Now my phone only boots up onto Bootloader. I can't access the recovery nor can I access adb. The only thing that works is fastboot. Can someone please help me? I have no idea what to do and after hours of searching, nothing like this has ever happened before I assume. I'm sort of a noob. I have adb installed and can use it but I don't know what commands to enter or what files to download or what. Is there any way I can reset my phone or get out of this bootloop? Thank You guys!
Click to expand...
Click to collapse
Use fastboot to flash a recovery. From recovery flash a ROM. Try that.
Sent from my HTCEVOV4G using xda app-developers app
kevin130 said:
Use fastboot to flash a recovery. From recovery flash a ROM. Try that.
Sent from my HTCEVOV4G using xda app-developers app
Click to expand...
Click to collapse
Hey, Thanks for telling me that. But I'm kind of a noob. Can you show me a download link of 4EXT (or whatever one you think is best) and what command I should use?
http://androidforums.com/evo-v-4g-all-things-root/626186-easy-guide-get-out-bootloops.html
Sent from my Nexus 7 using xda app-developers app
OK. So I looked into the guide, One of the attachments had a broken link so I couldn't do it. I tried flashing a stock RUU but it gave me an error. I tried getting the rom.zip from the temp and flashing that. My bootloader gave me an error and said something about the version being older than the firmware or something like that. I have finally gotten to my recovery, but that did not help. I've cleared EVERYTHING. Now I'm stuck in a bootloop where when the phone boots up it goes straight into JBear phone image with the arrow. I've tried everything. I still have no idea how to fix it. I really need some help.
duscdragon said:
OK. So I looked into the guide, One of the attachments had a broken link so I couldn't do it. I tried flashing a stock RUU but it gave me an error. I tried getting the rom.zip from the temp and flashing that. My bootloader gave me an error and said something about the version being older than the firmware or something like that. I have finally gotten to my recovery, but that did not help. I've cleared EVERYTHING. Now I'm stuck in a bootloop where when the phone boots up it goes straight into JBear phone image with the arrow. I've tried everything. I still have no idea how to fix it. I really need some help.
Click to expand...
Click to collapse
Try doing the wire trick again,
Sent from my Nexus 7 using xda app-developers app
duscdragon said:
OK. So I looked into the guide, One of the attachments had a broken link so I couldn't do it. I tried flashing a stock RUU but it gave me an error. I tried getting the rom.zip from the temp and flashing that. My bootloader gave me an error and said something about the version being older than the firmware or something like that. I have finally gotten to my recovery, but that did not help. I've cleared EVERYTHING. Now I'm stuck in a bootloop where when the phone boots up it goes straight into JBear phone image with the arrow. I've tried everything. I still have no idea how to fix it. I really need some help.
Click to expand...
Click to collapse
Try again from begining. Read and be carefully. See here http://forum.xda-developers.com/showthread.php?t=1813818.
bilbaro said:
Try again from begining. Read and be carefully. See here link?t=1813818.
Click to expand...
Click to collapse
Thanx for the help guys! Well, I fixed the bootloop and screen by flashing the boot.img. That got me stuck in an HTC logo bootloop, but I WAS SO HAPPY. I HAVE NEVER BEEN HAPPIER SEEN A BOOTLOOP THAN THIS. Well, since I knew how to fix this, I just flashed a stock ROM, and from there installed TWRP recovery and from there flashed a custom ROM (rooted, deodexed, stock, since I still don't have S-OFF). Now I'm just restoring my apps from Carbon( Helium) and getting some new themes. Thanks Guys!:laugh::laugh::laugh::laugh:
Just a heads up. The Evo V 4G seems to operate better when 4EXT recovery is used!
Sent from my Evo 3D CDMA using xda premium