Watch phone android Z1 MT6516 . CVFM-M277 - Android

Hello,
contrary to what has been said on this others post it is possible
to run tomtom GPS Sygic better than no bug .
I also need daide with a problem but sorry for my english language
because I speak correctly only the french language.
I have a problem with my watch phone Z1 , with the original rom I have installed
in root mode the program "DPI Changer" after the restart the phone as bricked.
For restart the phone I'm obliged re-flashing the firmware with the custom rom ,
withou saving before the old rom , I'm obliged also...
After flashing I have one problem:
when the charger is connected the phone indicate battery in charge , but the
the level of battery drops , for recharging I'm obliged to turn off the phone,
when the phone is turned in off mode the charging is correct.
I search the originaly old firmware , someone can posted here is for downloading please ?
Thank you for all

Ineed oryginal files too
i bricked Z1 too and i cant load backup file to them by SP flash tool. During the flashing i have some problem. Please if somebody has send to us a full right backup for Z1.
Thanks.

wodnik78 said:
i bricked Z1 too and i cant load backup file to them by SP flash tool. During the flashing i have some problem. Please if somebody has send to us a full right backup for Z1.
Thanks.
Click to expand...
Click to collapse
Hello,
Your watch phone is always bricked ?

Related

Automatically restart and shut down problem

hello guys my friend phone having automatically restart and shut down problem.phone is automatically restart at any time.phone is restart even during calling.phone is rooted and stock rom is installed.i try reset the phone but it did not solve the problem.any help is appreciated,thanks
sorry guys posted in wrong section by mistake should be in general section.
no...this is on Q&A section
but...i think youre battery was damage
edit: may in power button
vikasb32 said:
hello guys my friend phone having automatically restart and shut down problem.phone is automatically restart at any time.phone is restart even during calling.phone is rooted and stock rom is installed.i try reset the phone but it did not solve the problem.any help is appreciated,thanks
Click to expand...
Click to collapse
Dude at first take ur all external things out such as sim, sd card,battery etc. For 2hrs !!
It may help u!!
If not try to flash ur stock Rom via odin or Nandroid backup !!
It may help u becoz it may be a software problem !!
If it doesn't work..........
.
.
.
Play cricket with ur battery !!
Or may be its a hardware problem!!
Try formatting the device and try to install a new Rom or any stock rom.
P.S : Better if you try english classes!

TECNO L3

i format my rooted android with sp flash tool after dat ma android does not boot even into recovery mode plz help me even i plug d fone for charge it deos not show is charging
jeysmart said:
i format my rooted android with sp flash tool after dat ma android does not boot even into recovery mode plz help me even i plug d fone for charge it deos not show is charging
Click to expand...
Click to collapse
You formatted with "sp flash tool" ? FOrmat in what way, you mean you wiped your phone or what. And if I may ask, what was your intention for formatting or were you trying to flash the phone or what?
is it possible to reinstall anew custom stock or firmware to to bricked tecno l3
hello i have android china tecno l3 i have used almost seven months but some days earlier i got my phone bricked
this is how i did it and if possible tell me if it can get recovered
it was rooted by me and still i haven't changed anything expt rooting it and i downloaded android system tool apk which required root access i granted and i got into android system setting via that apk and by foolishness i started enabling all factory disabled setting since there are some that are disabled like phone encyrption and also enabled the setting which in tecno l3 does ordinary have so i remember i anabled too many l3 setting for me to see the effect of such so i finaly booted and the phone stayed in booloop i tried reseting it through recovery mode e3 but nothing hapened and restoring once backed up but all nothing and all regarding to wipe and clear user data i also did it and one thing remaining to do is to delete os and reinstall but i dont know to do it and i finaly decided to keep it until i take to the carlcare but i voided my walanty since i rooted and now i dont know what to if it is to through it away or waiting for a geek more than me to solve for my my problem but i guess your the one please i feel very hurt for my android is down and sleeping and sorry for exagerating
jeysmart said:
i format my rooted android with sp flash tool after dat ma android does not boot even into recovery mode plz help me even i plug d fone for charge it deos not show is charging
Click to expand...
Click to collapse
of course it wont boot. you just removed the OS without replacing with anything. I have access to the stock backup for your phone model, or do you have access to a working phone of the same model to backup from?

[Q] Help needed -Post flashing problem. Thanks.

Dear All,
I hope someone can help me get out of the situation.
I am using this FEITENG HTM H9001 6 Inches China Phone.
It came rooted by the vendor.
It is a good and nice phone. And I like it alot.
After I install a "font changing" apps,
The phone auto shut off and restart and it stuck at the HTM logo.
So sad Sad.
I know I need to reflash the firmware.
So I did some search on line...............
After finally managed to install the USB's driver which I was not able for quite long....
I follow the instruction on youtube from this site.
Down loaded the flast tool - SP Flash Tool v3.1332.0.sn187
Go to needrom to get a HTM H9001 firmware.
It should be there "right firmware". Someone there on the page where i got the firmware for H9001 said that its stable after he flash it. So proceeded to download it. Safely assume its the correct rom.
Using the flashtool, I followed the flashing steps exactly untill the green sign appeared. I was looking forward to see it start again after the problem mentioned above...........
After pulling out the cables from my PC, I press the power/start button of the phone to check if its ok....BUT It did started but it only shows "whitish color screen"
I can't even see the usual green colour HTM logo when the phone was switched on but I can hear sound of the phone starting... it stays at the whitish screen. And when I touch certain part of the screen the phone seem to response...just that I cannot view the desktop and the icon.. perhaps the video driver was corrupted in some way...or could it be the wrong rom
I proceeded re-flash it again........
same result - white screen.... phone still response to " power switch when press the LCD goes off. and some responsive sounds when the blank screen is touhed...
I am here in hope for some luck in finding ways to recover my phone back to normal...
It all started from installing a font changing apps that corrupted the firmware...than perhaps my action may have complicate the situation further....
Please. Any help would be great.
Thanks so much in advance.
How can I make good back my Feiteng HTM H9001
Or did I got the wrong ROM ?
It did not stae Feiteng just H9001 .
The rom I downloaded for my phone is here for my Feitend HTM H9001.
Is this the correct rom for my phone ?
Appreciate , really needs help to get out from this problem.
I love this phone. I want to make it good again Smile
I will try to upload some image to show its current stae.
many Thanks in advance.
Desmond
So desperate..I uses this MTK Droid tools.
I turn the phone on and it detected the details on my phone.....
Is there any way to use other tools to get my phone back to working like before the "font changing apps" time .... it was working great just before with no problem at all.............
MTK droid can detec the details of my phone...........
BUT i am lost - any way to use Droid tools to save the situation ?
I attached some picture to share what I meant...
Hope some nice great guys can shed some lights so i can try to move ahead..currently really lost... newbies to android phone....
Many Thanks
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Repair HTM ​​H9001
moneycow said:
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Click to expand...
Click to collapse
Hello friend,
if you want to recover your H9001 look this link:
movilesdualsim com htm6582
on the site will explain the steps to solve your problem.
To me it happened to me same thing that has happened to you.
And now I enjoy my H9001 more than ever.
regards

HardBricked Jiayu 3s

(Sorry for new post, a guys ask me to write my ask here)
Hello guys, this is two days I'm looking for how to fix the problem but it's two days that I can not.
There are two days I tried to install firmware on my Jiayu 3s while operating, SP Flash Tool said the root had gone well since that day, impossible to turn on my phone, does not start, but does not load is detected as the "Alcatel DNIS # ** Interface" on my computer, I tried several methods; reinstall the drivers, try to reflash ect .. but nothing happens. I know this method before, I had a Chinese firmware (MOLY.lr9.w1423.md.lwtg.cmcc.mp.v9) , everything had gone well, stages ect ..
But when I tried to flash firmware with Europeans, it was bricked the phone and from that day, I can not do anything.
(Sorry for the bad English but I use Google Translate)
Can you help me solve the problem? I you will be very grateful if someone could help me.
My phone has a non-removable battery.
Regards,
Lackted
I need help please...
I need my phone

Sp flash tool files

Hello after trying to use SPFLASH TOOL to flash my device because i had logo screen loop i end up formating everything and now my phone doesn't start but if i plug in to my computer i can hear the sound of plug in and out, i can still use spflash tool but i have black screen on my phone so i'm here asking for someone to help me find a way to fix this, do i have to build a new rom or system? Just tell me what to do because after Searching the whole internet after my phone i can't find much stuff.
Any help would be appreciated.
What phone model is it bro?
Sorry for not answering in time bro but i finally fixed my phone i had to reinstall like re-flash the entire phone.
My phone is a Qilive Q4 |7 auchan but i already fixed my problem i had trouble finding the stock rom for it since qilive aparently doesn't have any kind of support page but lucky that i found it.
Thanks anyway.

Categories

Resources