Hello after trying to use SPFLASH TOOL to flash my device because i had logo screen loop i end up formating everything and now my phone doesn't start but if i plug in to my computer i can hear the sound of plug in and out, i can still use spflash tool but i have black screen on my phone so i'm here asking for someone to help me find a way to fix this, do i have to build a new rom or system? Just tell me what to do because after Searching the whole internet after my phone i can't find much stuff.
Any help would be appreciated.
What phone model is it bro?
Sorry for not answering in time bro but i finally fixed my phone i had to reinstall like re-flash the entire phone.
My phone is a Qilive Q4 |7 auchan but i already fixed my problem i had trouble finding the stock rom for it since qilive aparently doesn't have any kind of support page but lucky that i found it.
Thanks anyway.
Related
hello guys need your help!
Friend was drunk, splashed his phone with water but didnt notice right away. after some time he realized what has happened and pulled battery out of the phone. unfortunately phone was installing some software update. now phone works fine but is stuck in a boot loop and cant load android. i cant connect it to pc either, says missing driver mt65xx android phone driver. phone is few weeks old, is there any way to restore it to health?
also i cant enter boot menu( power btn +volume up/volume down). phone isnt rooted, all the software is stock.
is there any way to reapir it or my poor firend has to send it on service( and pay for it)?
thanks in advance!
Hi HELP pls
HI have you managed to unbrick this phone... or i would be very thankful if you could provide me stock rom in .img format or.. if you used MTKDroidTools backup from the start of rooting. and i think i can mabey help you also if u have those
Dear All,
I hope someone can help me get out of the situation.
I am using this FEITENG HTM H9001 6 Inches China Phone.
It came rooted by the vendor.
It is a good and nice phone. And I like it alot.
After I install a "font changing" apps,
The phone auto shut off and restart and it stuck at the HTM logo.
So sad Sad.
I know I need to reflash the firmware.
So I did some search on line...............
After finally managed to install the USB's driver which I was not able for quite long....
I follow the instruction on youtube from this site.
Down loaded the flast tool - SP Flash Tool v3.1332.0.sn187
Go to needrom to get a HTM H9001 firmware.
It should be there "right firmware". Someone there on the page where i got the firmware for H9001 said that its stable after he flash it. So proceeded to download it. Safely assume its the correct rom.
Using the flashtool, I followed the flashing steps exactly untill the green sign appeared. I was looking forward to see it start again after the problem mentioned above...........
After pulling out the cables from my PC, I press the power/start button of the phone to check if its ok....BUT It did started but it only shows "whitish color screen"
I can't even see the usual green colour HTM logo when the phone was switched on but I can hear sound of the phone starting... it stays at the whitish screen. And when I touch certain part of the screen the phone seem to response...just that I cannot view the desktop and the icon.. perhaps the video driver was corrupted in some way...or could it be the wrong rom
I proceeded re-flash it again........
same result - white screen.... phone still response to " power switch when press the LCD goes off. and some responsive sounds when the blank screen is touhed...
I am here in hope for some luck in finding ways to recover my phone back to normal...
It all started from installing a font changing apps that corrupted the firmware...than perhaps my action may have complicate the situation further....
Please. Any help would be great.
Thanks so much in advance.
How can I make good back my Feiteng HTM H9001
Or did I got the wrong ROM ?
It did not stae Feiteng just H9001 .
The rom I downloaded for my phone is here for my Feitend HTM H9001.
Is this the correct rom for my phone ?
Appreciate , really needs help to get out from this problem.
I love this phone. I want to make it good again Smile
I will try to upload some image to show its current stae.
many Thanks in advance.
Desmond
So desperate..I uses this MTK Droid tools.
I turn the phone on and it detected the details on my phone.....
Is there any way to use other tools to get my phone back to working like before the "font changing apps" time .... it was working great just before with no problem at all.............
MTK droid can detec the details of my phone...........
BUT i am lost - any way to use Droid tools to save the situation ?
I attached some picture to share what I meant...
Hope some nice great guys can shed some lights so i can try to move ahead..currently really lost... newbies to android phone....
Many Thanks
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Repair HTM H9001
moneycow said:
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Click to expand...
Click to collapse
Hello friend,
if you want to recover your H9001 look this link:
movilesdualsim com htm6582
on the site will explain the steps to solve your problem.
To me it happened to me same thing that has happened to you.
And now I enjoy my H9001 more than ever.
regards
I need help with my mediapad S8-301L i can only get it to the logo screen on boot. and if i plug it in to my laptop i can get it in to fastboot mode. is there a way i can recover this device using fastboot????
i had rooted it and installed twrp like i had before. but due to formatting and starting a fresh to installing skygo i found my self rooting it again this time the same method bricked my device.... any help would be loved thanks in advance...
:good::good::good::good:
M1 s8 301l
hi m8, did u manage to fix this issue? im currently experiencing the same thing with mine, its just sitting at The EE splash screen, i can access fastboot, but it will not flash the system.img located from the update file,
would love to find out if there was a fix to this, i can even find the original EE rom that came supplied with the device...
Did you solve this , mines bricked due to overheating n desperately need a list from /dev/block/platform/msmxxxxx/by_name
That way I can extract the update.app correctly
Any help obliged
Rgds
(Sorry for new post, a guys ask me to write my ask here)
Hello guys, this is two days I'm looking for how to fix the problem but it's two days that I can not.
There are two days I tried to install firmware on my Jiayu 3s while operating, SP Flash Tool said the root had gone well since that day, impossible to turn on my phone, does not start, but does not load is detected as the "Alcatel DNIS # ** Interface" on my computer, I tried several methods; reinstall the drivers, try to reflash ect .. but nothing happens. I know this method before, I had a Chinese firmware (MOLY.lr9.w1423.md.lwtg.cmcc.mp.v9) , everything had gone well, stages ect ..
But when I tried to flash firmware with Europeans, it was bricked the phone and from that day, I can not do anything.
(Sorry for the bad English but I use Google Translate)
Can you help me solve the problem? I you will be very grateful if someone could help me.
My phone has a non-removable battery.
Regards,
Lackted
I need help please...
I need my phone
Hello everyone,
So I got a phone from a friend, he said the phone just stopped working. The power button just vibrates the phone and nothing happens, I cant get into the recovery, and when I connect it on a charger it just displays it's alcatel logo and does not move any further.
I assume that the memory got wiped, but maybe I'm wrong. Anyways, it's running on MTK6580 and I tried to flash a new recovery with system and everthing else. It didn't work out. And now I need your help... I can't find a stock ROM for this phone, and I need you guys to send me one if you can. The thing is, I need to install it through the SP Flash tool, so I will need all the information in the scatter file. Like I need the recovery, system, boot and all of that stuff....
If I posted in the wrong section, I'm sorry and if something is not clear, ask me.
Thanks in advance guys!