Related
I'm having a problem since I flashed the sensation rom (by crysis21) on my SGS2 yesterday.
My internet connection (mobile network) doesn't work anymore
I checked the APN settings and already resetted them and enterd my APN settings again. But it still doesn't work. I also restarted the phone multiple times.
Does anybody know where the problem is?
Installation steps were:
*copying the rom to sd
*CF-rooting the kernel via Odin
*booted up in CWM recovery and chose "install from zip file" and installed the rom (without any wipes)
Before I had the default samsung factory rom on it.
Have I made a mistake?
regards
lunatikk
try this http://forum.xda-developers.com/showthread.php?t=1260715
lunatikk said:
I checked the APN settings and already resetted them and enterd my APN settings again. But it still doesn't work. I also restarted the phone multiple times.
Click to expand...
Click to collapse
Have you checked the APN settings are the good ones? One thing is to have ones enabled and other totally different is to have ones that actually work.
Also when you go from Stock to Custom ROM you should do a full wipe!
Go to CWM and format /system, /data, /cache and reinstall the ROM.
warrez said:
try this http://forum.xda-developers.com/showthread.php?t=1260715
Click to expand...
Click to collapse
thanks, I'll check this out as soon as I get home.
I refrain a little from doing a full wipe because I don't want to get all my apps deleted (and I'm a little too lazy to perform a backup). Would mybe a new modem solve this problem?
And of course I checked the APN settings. I deleted the existant APN setting and added a new one so the settings can't be the problem.
I also checked some entries in Settings/Phone Info/Status.
It says here (translated from german):
Mobile Network Type: HSDPA
Service State: Function (or working rather)
Mobile Network Status: Disconnected (but sometimes it says also connecting here, though it never really gets conencted)
regards,
lunatikk
Even though I wiped everything, the data connection still doesn't work.
I did
"Wipe data/factory reset"
"Wipe cache partition"
"Wipe Dalvik cache"
and after that I installed the Sensation rom zip file again.
The data connection still doesn't work :'( (I added the APN after install, of course - the settings are 100% correct).
I also installed another rom (infected rom) but there's still no data connection.
Am I missing something? I'm getting really desperate over here.
regards
lunatikk
You could try flashing another Stock ROM via Odin and see if in stock works or not, then try a Custom ROM.
Sometimes the phone takes a while once you flash a new ROM till it establishes a decent 3G connection. Having "Data enabled", how much did you wait for the phone to establish a connection?
AzureusPT said:
You could try flashing another Stock ROM via Odin and see if in stock works or not, then try a Custom ROM.
Sometimes the phone takes a while once you flash a new ROM till it establishes a decent 3G connection. Having "Data enabled", how much did you wait for the phone to establish a connection?
Click to expand...
Click to collapse
I thought so too... Well, at work I waited some hours for the data connection being established but nothing happened.
This is crazy. I even restored my system with CWM and it still ain't working.
As soon as my GF comes home I'll replace the sim cards. Maybe the problems at the providers side...
after that, I'll try a stock rom (via odin).
thanks for your tip
lunatikk
I have the same problem and I'm on check rom.
i'm having the exact same problem, but with multiple roms and not just one. i tried omega and delv. both of these are giving me no data connection (only at the beginning) but once i restart there's no data connection.
did you manage to figure out what went wrong? I've resulted in my original rom that i had by restoring it using cwm.
dear sir,
my device is micromax canvas a1 aq4501. when I recovering a custom rom like cm13 my device Internet data not connected. I fully checked setting like mobile data, apn, but it still not working.
now I want my device situable custom rom. please give me the right information.
my email id :- [email protected]
your regard,
Jadab Debnath
India
The gist of my problem: Earlier today I successfully installed the latest CM9 from Joker (.0.7.0.0). Unfortunately, all wireless services other than WIFI were down (including SMS and telephone), and on start the phone produced an error about the com.android.phone force closing (or some such). I figured I had screwed something up, so I reflashed the clean stock firmware.
Since then (roughly 12 hours ago), I've been getting the stuck on the boot screen whenever I try flashing CM9. Relevant details follow:
Logcat doesn't help -- it tosses an error about the shell directory or file not being found (the exact error message escapes me, but I can reproduce it if need be).
I've tried formatting cache, data, and system, followed by a wipe (or two) on several occasions.
I've also tried flashing various versions of CM9 -- specifically .0.7.0.0 and .3.1. Both give the same result. I've also tried whatever version is in the KitchenSink v2.11 installer. Same result.
My CMW version is the 5.0.2.8. I installed it through RomManager (as opposed to the command prompt on Windows, which I did the first time when it quasi-worked). I've read that using v2 fixes this issue, but I can't find a live copy anywhere, so I haven't been able to try it.
Rather than going for a completely new install every time I bork something, I made a backup just after I finished unlocking and rooting the phone. I just restore that backup after each attempt, and it goes back to working fine on the stock Android firmware (3.whatever).
Any ideas? I think I'll try starting completely from scratch again and not using RomManager tomorrow, but if anyone can point out my error before then and save me a lot of -- hopefully not wasted -- effort, it would be fantastic.
Cheers,
Vash
vash265 said:
The gist of my problem: Earlier today I successfully installed the latest CM9 from Joker (.0.7.0.0). Unfortunately, all wireless services other than WIFI were down (including SMS and telephone), and on start the phone produced an error about the com.android.phone force closing (or some such). I figured I had screwed something up, so I reflashed the clean stock firmware.
Since then (roughly 12 hours ago), I've been getting the stuck on the boot screen whenever I try flashing CM9. Relevant details follow:
Logcat doesn't help -- it tosses an error about the shell directory or file not being found (the exact error message escapes me, but I can reproduce it if need be).
I've tried formatting cache, data, and system, followed by a wipe (or two) on several occasions.
I've also tried flashing various versions of CM9 -- specifically .0.7.0.0 and .3.1. Both give the same result. I've also tried whatever version is in the KitchenSink v2.11 installer. Same result.
My CMW version is the 5.0.2.8. I installed it through RomManager (as opposed to the command prompt on Windows, which I did the first time when it quasi-worked). I've read that using v2 fixes this issue, but I can't find a live copy anywhere, so I haven't been able to try it.
Rather than going for a completely new install every time I bork something, I made a backup just after I finished unlocking and rooting the phone. I just restore that backup after each attempt, and it goes back to working fine on the stock Android firmware (3.whatever).
Any ideas? I think I'll try starting completely from scratch again and not using RomManager tomorrow, but if anyone can point out my error before then and save me a lot of -- hopefully not wasted -- effort, it would be fantastic.
Cheers,
Vash
Click to expand...
Click to collapse
Use this recovery. http://forum.xda-developers.com/showthread.php?t=1218417
Or jokers at http://forum.jokersax.com/discussion/25/joker-recovery-for-the-photon-v3
I use the first link. Works perfect. Once you install the recovery. Wipe everything. Install 0.3.1. Boot into the system. Go back and flash the newest 0.7.0 update with gapps.
Should fix all the issues.
Sent from my SGH-I777 using XDA
Well, I got .3.1 working. Then tried to install .7 and it crapped itself again. Should I have cleared all the data/caches/etc. between the two?
Edit - I tried it again but this time cleared all the data between installs. It booted, but I got the same 'android.phone failed to start' message.
Edit 2 - Alright, I think I got it. I didn't clear anything between the two installs, but I installed each firmware twice without exiting recovery mode either time. It seems to be working (phone works, at least), although I'm not sure my 3G is working...
na7q said:
Use this recovery. http://forum.xda-developers.com/showthread.php?t=1218417
Or jokers at http://forum.jokersax.com/discussion/25/joker-recovery-for-the-photon-v3
I use the first link. Works perfect. Once you install the recovery. Wipe everything. Install 0.3.1. Boot into the system. Go back and flash the newest 0.7.0 update with gapps.
Should fix all the issues.
Sent from my SGH-I777 using XDA
Click to expand...
Click to collapse
Joker's recovery is a zip file you can flash from 5.0.2.8 if you don't feel like hooking up to the computer and using fastboot. But 5.0.2.8 doesn't work right to flash roms.
Sent from my MB855 using xda app-developers app
Aside from not being able to connect to any 3G networks (which is a problem...), it looks like it's working. Any ideas why 3G doesn't work now?
Thanks for the help thus far =)
vash265 said:
Aside from not being able to connect to any 3G networks (which is a problem...), it looks like it's working. Any ideas why 3G doesn't work now?
Thanks for the help thus far =)
Click to expand...
Click to collapse
Install 3.1, boot, reboot to recovery, wipe cache and dalvik, install 7.0, install gapps, boot.
Sent from my MB855 using xda app-developers app
Acvice said:
Install 3.1, boot, reboot to recovery, wipe cache and dalvik, install 7.0, install gapps, boot.
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Yep...already did that and got it to boot just fine. Now I'm struggling with poor reception. I've seen other users (different phones) mention radio upgrades, but I was extremely unfamiliar with the terminology. The phone seems to work okay, but I only get 1x reception for data.
Or were you actually suggesting to repeat the entire process?
Edit - Tried again, still no luck with 3G.
vash265 said:
Yep...already did that and got it to boot just fine. Now I'm struggling with poor reception. I've seen other users (different phones) mention radio upgrades, but I was extremely unfamiliar with the terminology. The phone seems to work okay, but I only get 1x reception for data.
Or were you actually suggesting to repeat the entire process?
Edit - Tried again, still no luck with 3G.
Click to expand...
Click to collapse
Before doing what i stated did you wipe everything (system, data, cache, dalvik)? Also, you still getting a forceclose upon boot or just crap signal? And are you on sprint or electrify?
Acvice said:
Before doing what i stated did you wipe everything (system, data, cache, dalvik)? Also, you still getting a forceclose upon boot or just crap signal? And are you on sprint or electrify?
Click to expand...
Click to collapse
I wiped everything. I can boot into the OS and my phone works fine, but my data rate is stuck on 1x (so crap signal). I'm on sprint.
vash265 said:
I wiped everything. I can boot into the OS and my phone works fine, but my data rate is stuck on 1x (so crap signal). I'm on sprint.
Click to expand...
Click to collapse
well did you have 3g on stock? there's no reason it would go to 1x unless 3g is unavailable. the rom shouldn't cause it to go into 1x.
na7q said:
well did you have 3g on stock? there's no reason it would go to 1x unless 3g is unavailable. the rom shouldn't cause it to go into 1x.
Click to expand...
Click to collapse
Yep. Despite popular belief, I'm not a moron =) I'm in the dead center of 3G availability for Sprint in my area, and with stock android I get perfect 3G reception. I've read reports of the same things happening to other people, but haven't found a solution yet. I restored to stock after making a backup to try updating the PRL. I'll update again when I find out if it worked or not.
Edit - Sprint just sucks, apparently. http://www.sprintusers.com/forum/showthread.php?t=225908
When I rebooted to stock I checked the radio status and sure enough, 1xRTT. Evidently I am a moron =p
There was something wrong with the phone afterall. To fix it, I did the following:
Dial *#*#4636#*#*
You'll be presented with a menu. Go to Phone Information.
About halfway down the page, there will be a menu with a dropdown. Mine was set to CDMA. To fix the issue, I changed it to CDMA auto (PRL). I'm now receiving excellent 3G reception.
Hi guys,
I wonder if someone can help me with this... really annoying problem!
I was checking out various roms i downloaded here, started with 4.0 aokp which was great, then gave cyanogen 4.2 a try, but then i wanted to go back to Aokp 4.0 cause it seemed to run faster
Now first thing, i couldnt get rid of cyanogen (no offense intended) cause when i wiped all data, cache and dalvik it just took aokp a few seconds to install from CWM recov, that doesnt seem right, right?
Then installed GAPPS, but still it ran on Cyanogen
So, i did a NANDROID backup, which made my phone like before i started with all this..
THIS IS WHERE IT WENT WRONG?
now it just wont read my simcard
i tried my sim in my old phone and that works fine, so the problem is in my phone somehow
is it something about the radio settings specific to my phone and network?
how can i change these settings and are they specific for my provider?
you guys always helped me out so i hope you know what i mean..
kipdeontdekker said:
Hi guys,
I wonder if someone can help me with this... really annoying problem!
I was checking out various roms i downloaded here, started with 4.0 aokp which was great, then gave cyanogen 4.2 a try, but then i wanted to go back to Aokp 4.0 cause it seemed to run faster
Now first thing, i couldnt get rid of cyanogen (no offense intended) cause when i wiped all data, cache and dalvik it just took aokp a few seconds to install from CWM recov, that doesnt seem right, right?
Then installed GAPPS, but still it ran on Cyanogen
So, i did a NANDROID backup, which made my phone like before i started with all this..
THIS IS WHERE IT WENT WRONG?
now it just wont read my simcard
i tried my sim in my old phone and that works fine, so the problem is in my phone somehow
is it something about the radio settings specific to my phone and network?
how can i change these settings and are they specific for my provider?
you guys always helped me out so i hope you know what i mean..
Click to expand...
Click to collapse
I've exactly the same problem.
Are your wifi and BT still OK ?
Is your IMEI (*#06#) still the same as under the battery ?
Was your phone locked ? Did you buy it with a SIM ?
My problem appeared after flashing several different modems/RILS : I got no error warning anywhere, but after reboot, I completely lost my netwerk connection. (no voice calls , no mobile data)
At first I thought a bad RIL driver, so I restored my Nandroid backup from the day before (after wipe cache/wipe dalvik/format system), but still no connection with the netwerk. and can't even make voice calls.
Then I was in panic !
After this I did a complete factory reset, and wiped/formatted cache/dalvik/system/data/SD-card and went in to download mode. After loading a stock ELLA for my region using Odin, still no connection. I was also never asked to enter the PIN-code for my SIM to unlock it.
Damned, this is an embarrassing situation : I can't think of loosing my SG3 for several weeks if I have to send it to Samsung !!
Mu phone is bought without SIM, so it's not SIM-locked.
My Wifi and BT are still OK, my IMEI is also still OK.
Any other ideas, please ?
How do I come in the service mode for the Radio ?
This is the way my netwerk is indicated : a circle with a stripe, much like the famous traffic sign.
Its fixed
So i have no idea how it eventually got fixed but if someone else has this problem, heres what i did:
Full wipe/factory reset blablabla all that
Did Nandroid restore again, put the AOKP ROM and GAPPS back on my phone
Installed ROM which was I9300CEDLI1
Used Odin to install latest CWM, which was already on there, but still
Then booted into CWM and installed .zip of course
This still went suspiciously fast since the very first time it took way longer, that worried me but,
Installed GAPPS again,
Rebooted... IT ASKED FOR MY PIN NUMBER!! hell yes that was what i wanted!
So now it again sees my simcard in there, so now i can make calls end use intnet again!
Still i think it started after the nandroid backup for some reason, or it may have been because of wiping Dalvik Cache?
I have no idea if that even makes sense
kipdeontdekker said:
Its fixed
So i have no idea how it eventually got fixed but if someone else has this problem, heres what i did:
Full wipe/factory reset blablabla all that
Did Nandroid restore again, put the AOKP ROM and GAPPS back on my phone
Installed ROM which was I9300CEDLI1
Used Odin to install latest CWM, which was already on there, but still
Then booted into CWM and installed .zip of course
This still went suspiciously fast since the very first time it took way longer, that worried me but,
Installed GAPPS again,
Rebooted... IT ASKED FOR MY PIN NUMBER!! hell yes that was what i wanted!
So now it again sees my simcard in there, so now i can make calls end use intnet again!
Still i think it started after the nandroid backup for some reason, or it may have been because of wiping Dalvik Cache?
I have no idea if that even makes sense
Click to expand...
Click to collapse
Good to hear your problem is fixed !
I'm still not able to make voice calls or enable mobile data : "insert SIM card" is the message I get.
I did already twice a full reset/factory restore and flash a stock ROM using PC Odin, but no avail.
Today I did a restore from my EFS folder using a backup that a had made before the problem appeared, but no avail.
BTW, did you also have the same indication from network status as on my screen-shot ?
Any idea what else I can try ?
I'm getting desperate .....
I'm having the same trouble after doing backup in TWRP when boot up it doesn't recognize the sim card.
I've flash CM10.1 and it only work after i remove the card e put it back on.
Try to see if it something about the simcard.
Regards,
Rui
Hello to everyone..
I live in Argentina and my carrier is Movistar.
I have a XT912 which bought it unlocked in the US.
The phone works flawlessly with the stock rom (SMS, MMS, 3G, etc)
Recently I installed CM10.1. It work very nice but I have to issues, I can't send SMS and 3G doesn't wort at all.
If I try to send a SMS it gives me an error even though I can receive SMS.
And 3G does not work even though I go to APN settings and enter the correct Movistar settings I copied from stock rom.
Any help will be appreciated...
Thanks in advance...
go into recovery, wipe cache and dalvik or flash another rom
heblu said:
go into recovery, wipe cache and dalvik or flash another rom
Click to expand...
Click to collapse
I really appreciate you taking your time to answer.
I've done that several times. First times I always delete the rom slot1 then create it again and install the new nightly from CM10.1. Later I learned it isn't necessary that action so every time I install a new nightly I do what you recommend.
I try to use it frequently so the phone gets multiple reboots. I tell you this because lot of people says some things get fixed after some reboots.
Anyway if you get any new idea it would be very welcome.
Thanks..
Q&A for [ROM] CM12-Light BETA
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] CM12-Light BETA. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
GPS Bug
Is the GPS still restarting the phone on this build?
Mustapha21 said:
Is the GPS still restarting the phone on this build?
Click to expand...
Click to collapse
Check the replies in the development build. T399 has to download an app specified in the development but people with the T399N seem to have no problems with v23.
Sent from my SGH-T399 using XDA Premium app
The developer Acreaperjb needed people to test the ROM and kireflow seems to have the SGH-T399N while he is meant to develop it for the SGH-T399. Is he now making a hybrid build for both models?
Sent from my SGH-T399 using XDA Free mobile app
wow
Had the lightwave rom on this before, and it worked well. After a few hrs of running cm i am blown away at the performance. Buttery smooth. Calls crisp, no issues whatsoever aside from the camera. Got xposed on it, gravitybox and greenify working great so far
And just thought I'd try it with the Camera MX from playstore and voila, it works! One picture at least
Bluetooth freezes calling app
Hi everyone, first of all, big thanks to AcreaperJB
I just installed version 0.2.3, overall I really like the ROM, I have two issues with it, really it's just one that I care about, here I go
1 - the big deal) I can't make calls over Bluetooth, after dialing I hear maybe one signal, maybe two if I'm lucky, after that the calling apps freezes, can't finish the call, can't call anybody else, can't hear anything, even turning off Bluetooth won't restore things, I can switch between apps and everything is fine except the calling app it's just stuck until I restart the phone, no more calling basically
2 - the workaround) camera will crash right after taking the photo, won't save the photo, I installed open camera from the play store and it works fine, I know it's a known issue, I just want to confirm it
Things to mention
- I did full install, all the partitions got wiped except the external SD card partition where I kept the ROM
- installation was scary, after installing the ROM it would circle back and forth, it was restarting and it wouldn't let me do anything, as soon as it got to CM wizard it restarted, I had no way to stop it or pause it so after about 10 restarts I gave up and just moved on and left the phone do restarts and I took care of other things around the house, already started thinking on how to go back to the stock rom, after coming back to the phone about two hours later the CM was waiting for me, got so surprised that it got out of the endless loop, i finished the wizard, went into CM and it doesn't restart anymore
thanks again
Uhm
Hey, does anyone know of a fix for the YouTube app? It keeps saying 'an error has occurred touch to retry'
SIM Card not detected?
So I clean installed the dirty v.0.2.3 and when it went to setup it said my sim card wasn't detected. Did I miss something? Does the "dirty" mean I won't get data? I'm new to this and I don't really know what the lingo means. I also can't change the APN's. It says "Access point name not available for this user".
I can't make any phone calls nor send any texts. My cellular data doesn't work either. Wi-fi and everything else works fine. Just the actual service.
Am I missing a step?
I flashed the ROM with twrp 2.8.4.0, I wiped davlick, data, cache, etc. I did the clean install, I don't understand why I am not getting any service or why my sim card isn't detected.
Please help
I need another link to download
Hi everyone
So my problem is for some reason here in Cuba I can enter to www.androidfilehost.com and download (Dirty) V.0.2.3 https://www.androidfilehost.com/?fid=24052804347774276 I dont know why but if anyone can please reupload the file to another server like MEGA or mediafire I have the Galaxy Light and I like to help to test the build and make some comments about.
Regards
michel0303 said:
Hi everyone
So my problem is for some reason here in Cuba I can enter to www.androidfilehost.com and download (Dirty) V.0.2.3 https://www.androidfilehost.com/?fid=24052804347774276 I dont know why but if anyone can please reupload the file to another server like MEGA or mediafire I have the Galaxy Light and I like to help to test the build and make some comments about.
Regards
Click to expand...
Click to collapse
https://mega.co.nz/#!R8RkhRTI!A72ioxNsedZ3uGgY3jE6MMjKkaVYYBwL8z8WBnie8lI
kireflow90 said:
https://mega.co.nz/#!R8RkhRTI!A72ioxNsedZ3uGgY3jE6MMjKkaVYYBwL8z8WBnie8lI
Click to expand...
Click to collapse
Thank you so much Downloading right now.
michel0303 said:
Thank you so much Downloading right now.
Click to expand...
Click to collapse
no problem, glad I could help
Screen going blank upon boot
I tried installing this rom after doing a full backup & then wipe. I made sure to wipe dalvik and cache. I then installed the 0.2.3.zip via TWRP 2.7.1.0 that comes with Light V3 Rom.
Install completed without error but upon boot the setup menu appears and then vanishes. I can get it to display ever-so-briefly by powering the display off/on.
I have a T-Mobile T399 unlocked for use on ATT. Unjustified Devs earlier builds did the same thing but would constantly reboot as well. Your rom doesn't reboot but the screen behaves similarly.
Have you heard of this behavior before, and are there any steps I can take to provide you with diagnostic information?
Update TWRP
Vorell said:
I tried installing this rom after doing a full backup & then wipe. I made sure to wipe dalvik and cache. I then installed the 0.2.3.zip via TWRP 2.7.1.0 that comes with Light V3 Rom.
Install completed without error but upon boot the setup menu appears and then vanishes. I can get it to display ever-so-briefly by powering the display off/on.
I have a T-Mobile T399 unlocked for use on ATT. Unjustified Devs earlier builds did the same thing but would constantly reboot as well. Your rom doesn't reboot but the screen behaves similarly.
Have you heard of this behavior before, and are there any steps I can take to provide you with diagnostic information?
Click to expand...
Click to collapse
Think you need to use the twrp 2.8.4 that is in the forum
http://forum.xda-developers.com/android/development/recovery-twrp-2-8-1-0-touch-recovery-t2924604
Try flashing a T-Mobile radio. Just Google it and it should come up.
Sent from my SGH-T399 using XDA Free mobile app
Answer: CM12-Light BETA for t399n camara workaround.
I have installed cm12 for the Samsung galaxy light t399N.. I am happy to report Everything is working fine! except the stock camera, I tried 7-8 camera apps on the Google play store with no luck, until.... VIOLA, I found one that works. It is called FOTOR. it works now. I have an extra step to deal with but the point is that my phone is now fully functional and running 5.02 lollipop on my METRO PCS t399n. BTW i did not have to edit the apn settings; interestingly, I have an indicator that tells me I have T-Mobil for my carrier.... Thank goodness for the recent merger and switch over to the T-Mobil network, one more problem solved. Hope that helps someone else out there.
thanks
it works
I'm using it a week ago, everythings is ok, only the stock camera not save the photos,
Sorry for my english,
---------- Post added at 01:18 AM ---------- Previous post was at 01:12 AM ----------
md777 said:
I have installed cm12 for the Samsung galaxy light t399N.. I am happy to report Everything is working fine! except the stock camera, I tried 7-8 camera apps on the Google play store with no luck, until.... VIOLA, I found one that works. It is called FOTOR. it works now. I have an extra step to deal with but the point is that my phone is now fully functional and running 5.02 lollipop on my METRO PCS t399n. BTW i did not have to edit the apn settings; interestingly, I have an indicator that tells me I have T-Mobil for my carrier.... Thank goodness for the recent merger and switch over to the T-Mobil network, one more problem solved. Hope that helps someone else out there.
Click to expand...
Click to collapse
I'm using the app A Better Camera, it's woking ok, on my t399n
Reboot cycle
After installing V0.2.3 using TWRP 2.8.4.0 on a T399 on a T-mo network I am stuck in a continuous cycle of rebooting every few seconds. I have tried reinstalling starting from a stock image and wiping the cache, data, and dalvik. Any idea what I could be messing up?
yodal said:
After installing V0.2.3 using TWRP 2.8.4.0 on a T399 on a T-mo network I am stuck in a continuous cycle of rebooting every few seconds. I have tried reinstalling starting from a stock image and wiping the cache, data, and dalvik. Any idea what I could be messing up?
Click to expand...
Click to collapse
Set GPS to device only
Sent from my SGH-T399N using XDA Free mobile app