Hello.
Im having big issues with battery drain, the process "l2_hsic" is draining it.
Now i first was on the ics standard rom with this problem and change to Toldo ics rom (http://forum.xda-developers.com/showthread.php?t=1813651)
I have done a complete wipe (not just factory reset), also tied different kernels (yoda and A1), but same drain remains.
Anyone got a clue on how to resole this ?
have the 3g model of the tab.
Thread closed as duplicate of this http://forum.xda-developers.com/showthread.php?t=2149003
Thank you.
Related
Using Gt-p1000 aka gt-p1000t/sgh-i987 with custom rom of aokp ics p1 milestone 6 with its respective kernel. Tried using cm9.1 Stable version too. Battery problems occurred everytime the device is on low battery or in medium level 60-70%. Device auto shutdown and at times could only be boot to system by plugging out sim cards. Still not very sure its a problem of sim card, probably battery or the custom rom itself or even the charger/adapter to point this issue exactly. Anybody got any info on this?
Here's some screenshots of battery stats using aokp ics version last latest milestone.
Anyone had the same problem and know ways to fix this? Any help much appreciated of course.
(uploaded a screeenshot only. others are missing, especially ss of cm9)
hello .. im using the omega rom for my galaxy s3 international. i was on v.44 with no problems ... and update it to v45 i made a full wipe .. and since i update.. i am facing a sever freezes issues.. i need to remove the battery every 5-10 minutes... any suggestions ??
Best roll back to the version that worked and contact your ROM chef for help.
Try the Perseus kernel. *usually* these freezes are due to SDS fix. Even though you have V2 of this fix, Perseus uses a completely different fix which may help better.
also, read the "ultimate unusual freezing" thread in General
v45 is 4.2.2 so maybe u did not wipe properly.
And also hope u do not install perseus before changing your rom to v44. Perseus is not built for 4.2.2.
I have a GT-I9100G that currently is on the I9100GXXLSR firmware.It was running fine for a couple of months until started causing all sorts of problems.
If there is a better jelly bean rom please tell or I would downgrade to GB or ICS depending on stability. Please advise me...
Stock rom should be as stable as it can get. Try factory reset wipes cache and reboot. Whay problems do you have with it?
Already tried. Factory resets only solve problems temporarily and cache wipes do nothing. I am having problems like : SOD,vibration not working after reboot, OTG unmount wakelock,Android wakelocks causing horrendous battery drains etc.
So, please suggest me if there is a better jb firmware for the i9100g or I would happily downgrade to GB or ICS depending on what you guys suggest. I would have noi problems sacrificing features over stability. PLEASE HELP ME..
I think you should just try any to rule out software problem cuz if its stock rom/kernel then you may have hardware problem. If another version of jb is no good then yes drop down to ics. You shouldnt need to go down to gb to rule out software.
Doesn't ics have brickbug? Which ones more faster and stable, ics or gb? I am willing to stay away from jb for now.
4.0.4 ics stay away from. Id go with 4.0.3 not gb
Ok thanks much appreciated.
I can't ask this in appropriate thread, so unfortunately I have to make a separate one. But I did some research first, many asked this question but found no solution.
Problem
I use the very good rom IzerHD™ V4 for the p31xx. This rom is also for the p3100 with phone sim capability. But the p3110 is a wifi only tablet. The problem is that the in build phone capability drains unnecessarily my battery.
Steps taken:
- As suggested I removed contacts.apk, dialer.apk, telephonyprovider.apk and mms.apk. But in Battery I see Cell Standby still there and using 12% power.
- Edit Build.prop for renaming p3100 into p3110
Question
How can I convert the p3100 rom into p3110 rom without the cell radio which drains my battery.
Thanks
Already 78 views but no solution yet
hey all . i have galaxy S2 gt-i9100g and i posted here because i found no Q&A for that .
i have 9100g was on stock 4.1.2 , i flashed a couple roms (CM11 , PA , CRDroid,.......) and now i settled on PA beta6
i have this strange issue when my phone won't charge or recognize a connected USB port , it happens rarely and when it does a reboot is enough to fix it .
Is this software realted (kernel or so ...) or hard ware related ??
Oh and how can i revert back to stock official i found no 4file flash with bootloader and pit so i got afraid i might end up with a brick or a bootloop
please help me guys
Please tell does it have the same issue on other roms? Or are you encountering this issue only on Paranoid Android?
I had about same issue with my i9100. When I charge my phone it stuck at same percent for a while (10 or 20 minutes maybe). My solution is observe your battery voltage with Battery voltage s app and try to charge when battery voltage is at 3500mV.
syedbilal093 said:
Please tell does it have the same issue on other roms? Or are you encountering this issue only on Paranoid Android?
Click to expand...
Click to collapse
i tried alot of roms like CM11 and CR rom and slim cat all had the same issue now after the latest update of CM11 i think the issue is solved 2 days and all is going well .... what do you think could it be kernel related !!
It seems like ...! It occurs due to kernel... i havent experienced such kind of issue but it is a kernel issue.