[Q] Neo L vibrates but screen stays black and battery heats - Sony Ericsson Xperia Neo, Pro

Hello, help needed pls
My problem:
-Neo L vibrates when switched on but the screen stays black and the phone heats progressively.
- while on, it happened 2 times that the screen got black during the day. I could take a call once by flipping my finger on the black screen(phone was ringing).
What I tried to solve the issue after reading the forums:
-charge the phone, remove sd and sim card and start the phone. (succeeded 4 or 5 times out of around 50tries in 5 days, doesn't work anymore)
-update the phone and delete all my downloaded apps during the few times where the phone managed to start (didn't help)
-Used Sony PC companion to repair the phone (didn't help).
What I did not do:
- i didn't try flashing whatsoever or mess with the phone in any way(it's my first android phone). Really.
-As far as I know the phone did not receive a choc that could have caused the problem.
- i didn't try calling underwater. Aside from humidity i can not see any cause there
Any idea on how to solve this issue or the cause of the problem would be very helpful. Thanks.

First way
Use my mega guide for neo L in my sig below
And head over to that thread and find unbrick in there !
If that doesn't help then it's mean u can either go to sony or sell it
It is 100% hardware faulty if unbrick doesn't help :angel:
Good luck
Second way
By the way use SUS ! Don't use that suck PC Companion !
SUS is always great

Saingpor said:
First way
Use my mega guide for neo L in my sig below
And head over to that thread and find unbrick in there !
If that doesn't help then it's mean u can either go to sony or sell it
It is 100% hardware faulty if unbrick doesn't help :angel:
Good luck
Second way
By the way use SUS ! Don't use that suck PC Companion !
SUS is always great
Click to expand...
Click to collapse
Hello, thanks for the quick answer,
If you don't mind I think i will start with the second way..looks more reasonable. By SUS you mean Sony ericson Update Service I guess.
I didn't try flashing the phone, if second way doesn't work, do you still think unbrick is appropriate? will it void my warranty (valid in a faraway country)?
Thanks

smead221 said:
Hello, thanks for the quick answer,
If you don't mind I think i will start with the second way..looks more reasonable. By SUS you mean Sony ericson Update Service I guess.
I didn't try flashing the phone, if second way doesn't work, do you still think unbrick is appropriate? will it void my warranty (valid in a faraway country)?
Thanks
Click to expand...
Click to collapse
Unless u unlock BL then it will void your warranty !
I'd prefer flashtool over SUS ! :angel: In some case , what if your pc hang during downloading firmware via SUS ! What if it is in the middle of process ! For unbrick using flash method will be million time easier and save a lot of time !
How can flash ftf void your warranty ? Don't worry mate

Saingpor said:
Unless u unlock BL then it will void your warranty !
I'd prefer flashtool over SUS ! :angel: In some case , what if your pc hang during downloading firmware via SUS ! What if it is in the middle of process ! For unbrick using flash method will be million time easier and save a lot of time !
How can flash ftf void your warranty ? Don't worry mate
Click to expand...
Click to collapse
Sorry, I'm completely new to all this. I'll try as you say tonight after work, thanks again, will keep you updated.

smead221 said:
Sorry, I'm completely new to all this. I'll try as you say tonight after work, thanks again, will keep you updated.
Click to expand...
Click to collapse
Don't worry mate ! And a warm welcome to here !
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- THank to people when they are helping you / You are helped out / Be nice :angel:

Saingpor said:
Don't worry mate ! And a warm welcome to here !
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- THank to people when they are helping you / You are helped out / Be nice :angel:
Click to expand...
Click to collapse
So, here is first result at step 3 of flashing the device from flashtool:
25/023/2013 10:23:14 - INFO - Selected MT25i_4.1.B.0.631_SONY MOBILE by wewenk.ftf
25/023/2013 10:23:14 - INFO - Preparing files for flashing
25/023/2013 10:23:26 - INFO - Please connect your device into flashmode.
25/023/2013 10:23:32 - INFO - Opening device for R/W
25/023/2013 10:23:33 - INFO - Start Flashing
25/023/2013 10:23:33 - INFO - Processing loader
25/023/2013 10:23:33 - INFO - Checking header
25/023/2013 10:23:33 - INFO - Ending flash session
25/023/2013 10:23:33 - ERROR -
25/023/2013 10:23:33 - ERROR - Error flashing. Aborted
25/023/2013 10:23:34 - ERROR - Drivers need to be installed for connected device.
25/023/2013 10:23:34 - ERROR - You can find them in the drivers folder of Flashtool.
I installed flashmode driver after this, there was also drivers for different xperias but i didnt see the Neo L, was there just the flashmode driver to install manuall?
Anyway, second try gives this:
25/047/2013 10:47:23 - INFO - Device connected in flash mode
25/047/2013 10:47:32 - INFO - Selected MT25i_4.1.B.0.631_SONY MOBILE by wewenk.ftf
25/047/2013 10:47:32 - INFO - Preparing files for flashing
25/047/2013 10:47:48 - INFO - Please connect your device into flashmode.
25/047/2013 10:47:48 - INFO - Opening device for R/W
25/047/2013 10:47:48 - INFO - Start Flashing
25/047/2013 10:47:48 - INFO - Processing loader
25/047/2013 10:47:48 - INFO - Checking header
25/047/2013 10:47:48 - INFO - Ending flash session
25/047/2013 10:47:48 - ERROR -
25/047/2013 10:47:48 - ERROR - Error flashing. Aborted
25/047/2013 10:47:49 - INFO - Device connected in flash mode
Any idea of what went wrong?

smead221 said:
So, here is first result at step 3 of flashing the device from flashtool:
25/023/2013 10:23:14 - INFO - Selected MT25i_4.1.B.0.631_SONY MOBILE by wewenk.ftf
25/023/2013 10:23:14 - INFO - Preparing files for flashing
25/023/2013 10:23:26 - INFO - Please connect your device into flashmode.
25/023/2013 10:23:32 - INFO - Opening device for R/W
25/023/2013 10:23:33 - INFO - Start Flashing
25/023/2013 10:23:33 - INFO - Processing loader
25/023/2013 10:23:33 - INFO - Checking header
25/023/2013 10:23:33 - INFO - Ending flash session
25/023/2013 10:23:33 - ERROR -
25/023/2013 10:23:33 - ERROR - Error flashing. Aborted
25/023/2013 10:23:34 - ERROR - Drivers need to be installed for connected device.
25/023/2013 10:23:34 - ERROR - You can find them in the drivers folder of Flashtool.
I installed flashmode driver after this, there was also drivers for different xperias but i didnt see the Neo L, was there just the flashmode driver to install manuall?
Anyway, second try gives this:
25/047/2013 10:47:23 - INFO - Device connected in flash mode
25/047/2013 10:47:32 - INFO - Selected MT25i_4.1.B.0.631_SONY MOBILE by wewenk.ftf
25/047/2013 10:47:32 - INFO - Preparing files for flashing
25/047/2013 10:47:48 - INFO - Please connect your device into flashmode.
25/047/2013 10:47:48 - INFO - Opening device for R/W
25/047/2013 10:47:48 - INFO - Start Flashing
25/047/2013 10:47:48 - INFO - Processing loader
25/047/2013 10:47:48 - INFO - Checking header
25/047/2013 10:47:48 - INFO - Ending flash session
25/047/2013 10:47:48 - ERROR -
25/047/2013 10:47:48 - ERROR - Error flashing. Aborted
25/047/2013 10:47:49 - INFO - Device connected in flash mode
Any idea of what went wrong?
Click to expand...
Click to collapse
Plz check no final verification and see !
If not work then Reboot PC and install fastboot and flashmode driver in flashtool/driver ! There is no neo L driver so just install the 2 that i mentioned !
Plz note windows 8 cause some serious problem which i cant help ! If u r 7 then it is fine !

Hey Saingpor,
It seems the flash was successful. It said Flash successful but afterwards it said something like flashtool needs usb debugging and something else to be activated in order to work (which i can't check since the screen stays black).
So anyway, flash done, phone still not working. I tried changing the microsd and flashing again but with no result. Do you think that it's possible that this one time the phone fell over a month ago can be the cause of a hardware defect that affects the phone now? And if it's from origin, is it possible that the phone works perfectly for 3 months then suddenly stops working?
I don't get this. Anyway, thanks for your help.

smead221 said:
Hey Saingpor,
It seems the flash was successful. It said Flash successful but afterwards it said something like flashtool needs usb debugging and something else to be activated in order to work (which i can't check since the screen stays black).
So anyway, flash done, phone still not working. I tried changing the microsd and flashing again but with no result. Do you think that it's possible that this one time the phone fell over a month ago can be the cause of a hardware defect that affects the phone now? And if it's from origin, is it possible that the phone works perfectly for 3 months then suddenly stops working?
I don't get this. Anyway, thanks for your help.
Click to expand...
Click to collapse
Go to Sony center mate
Sent from neo L using Stock Modded

Related

[Help] Phone no longer booting.. Need help ASAP

Hello All,
After flashing the stock firmware and waited for the GB updated, . Once GB released, it got updated via PC Companion saying install error or something to try again. 2nd time it appeared again, now the phone wouldn't re-boot to Andriod,Even the SE logo also doesnt apprear. Removed the batteryand all sorts of stuff, however flash mode still works. Then tried to do a Repair via Pc companion it went half way and then again same error. install error...etv. Next used Seus to repair it... same error again "installation error". Next step used flashtool and downloaded a generic firmware.. , i tried installing the "X10i_2.1.1.a.0.28 frimware it mentioned "flashing kernel.sin" and then error flashing. Next downloaded the "X10i_2.0.A.0.504_stock: this time i only reached till. See below :-
30/012/2011 05:12:10 - INFO - Searching Xperia....
30/012/2011 05:12:10 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&11976120&0&5
30/012/2011 05:12:10 - INFO - Start Flashing
30/012/2011 05:12:10 - INFO - VER="R8A031";DATE="20100707";TIME="11:32:00";
30/012/2011 05:12:10 - INFO - Flashing loader
30/012/2011 05:12:14 - INFO - PROT_VER="02";DATE="20091222";TIME="15:39:00";VER="R4A024";CXC="1226-2250";TYPE="S1_LOADER";UNIQUE_DEV_ID="FCEB7F870F5D489DCA0BEB6E658F00D242FEC4B4";SEC_LOCK_STATUS="LOCKED";OTP_DATA="4BBD77004714040209480430287F34D6F0C32000";IMEI="01237900414396";AID_VERSION="0004";EROM_AID="0001";LOADER_AID="0001";SW_AID="0001";CUST_AID="0001";SIM_LOCK_AID="0001";HWCONF_AID="0001";PROD_AID="0000";ACTIVE_LOADER_AID="0001";MAN_ID="002C";DEV_ID="00B3";SIN_VER="0001";AID_TAMP="NOT_TAMPERED";MAX_PKT_SZ="00010000";AUTH_LEVEL="NONE";AUTH_MET="0001";CARD_PRESENT="YES";CARD_SIZE="16GB";CARD_DATA="";LOADER_ROOT="S1_Loader_Root_f851";EROM_ROOT="S1_EROM_Root_b15e";SW_ROOT="S1_SW_Root_ac12";CUST_ROOT="S1_Cust_Root_5789";SIM_LOCK_ROOT="S1_SL_Root_f20d";HW_CONF_ROOT="S1_HWConf_Root_ee5d";
30/012/2011 05:12:16 - INFO - Flashing kernel.sin
30/012/2011 05:12:18 - INFO - Flashing amss_fs.sin
30/012/2011 05:12:18 - INFO - Flashing dsp1.sin
30/012/2011 05:12:33 - ERROR - Error flashing. Aborted
30/012/2011 05:12:33 - INFO - Now unplug the device and power it on
30/012/2011 05:12:33 - INFO - Then go to application settings
30/012/2011 05:12:33 - INFO - turn on Unknown Sources and Debugging
Click to expand...
Click to collapse
Now my phone never boots into a ro,m only flash mode is working.. I dont wanna try more stuff fearing my battery will drain as the light is still in green. Would appreciate help asap on what would i need to do next.
I have the same problem but me ocurred during a restore and the city were i live suffered a blackout, i'm stucked like you
josema0890 said:
I have the same problem but me ocurred during a restore and the city were i live suffered a blackout, i'm stucked like you
Click to expand...
Click to collapse
man.. hope some of the dev's can help out here... Mods i think can merge the threads since we are suffering the same problem.. Although have you tried flashing your phone??

[REQUEST] Telcel users please!!!! ROM

Well I think the title of the thread says everything, its probably that i have to go to service and make my warranty valid, right now I have a generic spain rom, but i think that if i go with this i will have problems, so please anyone here from México that still have their phone with that rom and update via seus or repair their phone will made tha favor to upload that files?
I have the files from my backup, but when i create the ftf and try to flash it with flashtool, it doesn't seems to work, the installation is aborted with a major error code like this:
26/054/2012 02:54:52 - INFO - Ending flash session
26/054/2012 02:54:52 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0076";ERR_DYNAMIC=" failed to set ta config";
26/054/2012 02:54:52 - ERROR - Error flashing. Aborted
26/054/2012 02:54:52 - INFO - Device connected in flash mode
26/054/2012 02:54:53 - INFO - Device disconnected
26/054/2012 02:54:55 - INFO - Device connected in flash mode
26/055/2012 02:55:33 - INFO - Device disconnected
26/000/2012 03:00:49 - INFO - Device connected with USB debugging off
26/000/2012 03:00:49 - INFO - For 2011 devices line, be sure you are not in MTP mode
Maybe because i don't have the loader.sin, but i don't know where to find it.
i can upload the archives if you want to.
cgomezparra said:
I have the files from my backup, but when i create the ftf and try to flash it with flashtool, it doesn't seems to work, the installation is aborted with a major error code like this:
26/054/2012 02:54:52 - INFO - Ending flash session
26/054/2012 02:54:52 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0076";ERR_DYNAMIC=" failed to set ta config";
26/054/2012 02:54:52 - ERROR - Error flashing. Aborted
26/054/2012 02:54:52 - INFO - Device connected in flash mode
26/054/2012 02:54:53 - INFO - Device disconnected
26/054/2012 02:54:55 - INFO - Device connected in flash mode
26/055/2012 02:55:33 - INFO - Device disconnected
26/000/2012 03:00:49 - INFO - Device connected with USB debugging off
26/000/2012 03:00:49 - INFO - For 2011 devices line, be sure you are not in MTP mode
Maybe because i don't have the loader.sin, but i don't know where to find it.
i can upload the archives if you want to.
Click to expand...
Click to collapse
Well its probably thats the main reason, let me see if i get from another people, if not can you upload?? maybe we can charge the loader.sin from another generic ROM, it should work (meanwhile its the same version)
Telcel Firmware
This is my backup
https://rapidshare.com/files/1652820858/Telcel.rar
cgomezparra said:
This is my backup
https://rapidshare.com/files/1652820858/Telcel.rar
Click to expand...
Click to collapse
Thanks +1 !!!! Will try to create FTF archive with flashtool hope i will have succes
Edit: Already have succes created an FTF working, and its working just ok!, with all the bull**** that Telcel put it in, will upload soon thanks!!!!!
Ok already have it functionally, http://www.4shared.com/rar/96E9fTr7/60A362_Telcel.html the ROM from Telcel .62 version... all working.... thanks mate!!!
Thank you
Thanks for sharing! Have you tried it? downloading...
mozzztro said:
Thanks for sharing! Have you tried it? downloading...
Click to expand...
Click to collapse
It's working fine, the link I provide, tested and functional, just take a long timeee to boot the first time
Enviado desde mi LT26i usando Tapatalk 2

[Q] Problems with Flash Tool

Hello guys, this is what happened to me yesterday. I wanted to flash stock ics to my SXS via flashtool. The problem was that flash tool got stuck at 2% so I thought I needs some time and left it there for quite some time, when I came back it was still at 2%. I didn't see any other option to unplug my phone. When I powered it on sony boot logo appeared and a phone with exclamation mark. I tried to repeat flash process and got the same result. Tried with 2 different pc-s, different usb ports/cables and older versions of flash tool. Still the problem is there :S
Any solution to this?
P.S Oh one more thing I can flash kernel successfully and I did, I actually can get into recovery and restore, but unfortunly problems remains.
simi318 said:
Hello guys, this is what happened to me yesterday. I wanted to flash stock ics to my SXS via flashtool. The problem was that flash tool got stuck at 2% so I thought I needs some time and left it there for quite some time, when I came back it was still at 2%. I didn't see any other option to unplug my phone. When I powered it on sony boot logo appeared and a phone with exclamation mark. I tried to repeat flash process and got the same result. Tried with 2 different pc-s, different usb ports/cables and older versions of flash tool. Still the problem is there :S
Any solution to this?
P.S Oh one more thing I can flash kernel successfully and I did, I actually can get into recovery and restore, but unfortunly problems remains.
Click to expand...
Click to collapse
Try flashing another Rom....!
Sent from my ST25i using xda app-developers app
I did, but for some unknown reason I always get stuck here
30/002/2012 11:02:34 - INFO - <- This level is successfully initialized
30/002/2012 11:02:34 - INFO - Flashtool Version 0.9.7.0 built on 2012-09-27 22:53:38
30/002/2012 11:02:34 - INFO - You can drag and drop ftf files here to start flashing them
30/002/2012 11:02:39 - INFO - Device disconnected
30/002/2012 11:02:54 - INFO - Selected LT26i_4.0.4_R4G-6.1.A.0.453_Customized UK 1257-3921.ftf
30/002/2012 11:02:54 - INFO - Preparing files for flashing
30/003/2012 11:03:12 - INFO - Please connect your device into flashmode.
30/003/2012 11:03:16 - INFO - Device connected in flash mode
30/003/2012 11:03:16 - INFO - Opening device for R/W
30/003/2012 11:03:16 - INFO - Reading device information
30/003/2012 11:03:16 - INFO - Phone ready for flashmode operations.
30/003/2012 11:03:16 - INFO - Start Flashing
30/003/2012 11:03:16 - INFO - Processing loader
30/003/2012 11:03:16 - INFO - Checking header
30/003/2012 11:03:17 - INFO - Flashing data
30/003/2012 11:03:19 - INFO - Loader : S1_Root_de72 - Version : R5C004 / Bootloader status : ROOTED
30/003/2012 11:03:19 - INFO - Disabling final data verification check
30/003/2012 11:03:19 - INFO - Processing partition-image.sin
30/003/2012 11:03:20 - INFO - Checking header
30/003/2012 11:03:20 - INFO - Flashing data
30/003/2012 11:03:22 - WARN - This file is ignored : simlock.ta
30/003/2012 11:03:22 - INFO - Processing kernel.sin
30/003/2012 11:03:22 - INFO - Checking header
30/003/2012 11:03:23 - INFO - Flashing data
30/003/2012 11:03:26 - INFO - Processing fotakernel.sin
30/003/2012 11:03:26 - INFO - Checking header
30/003/2012 11:03:26 - INFO - Flashing data
30/003/2012 11:03:29 - INFO - Processing amss_fs_2.sin
It doesn't go after that last line.
download the latest flashtool
Yeah latest flashtool or custom rom.. Which is better than stock anyways
Sent from my LT26i using xda app-developers app
Thanks for all replies, but I found solution myself. I flashed that tft to relock bootloader and voila my phone booted normally and it works like a charm now.
Best regards, Simon
Problem with Flash Tools 0.9.7
simi318 said:
Thanks for all replies, but I found solution myself. I flashed that tft to relock bootloader and voila my phone booted normally and it works like a charm now.
Best regards, Simon
Click to expand...
Click to collapse
X10Flasher needs to be replaced with older version (0.9.0 or 0.8.5). It's in the flashtool original thread posted by Androxyde:
"Found a bug on 0.9.7 avoiding flashing. Here is a quickfix
http://ul.to/szfl8gh7
Replace x10flasher.jar from 0.9.7 with this one (bug with flashing amss_fs_1)
Flashtool developper.
Last version : 0.9.7.0
Flashtool Homepage"
What is the problem here ?
Everytime when i try to make downgrade to my Xperia Z1 and i install flashtool this error appear .What i must to do? I try to make downgrade and i can't?Please help me !!!

plzz guyzz help me

THE PROB IS PHONE IS NOT SWITCHNG ON MANUALLY AND NOT EVEN AFTER FLASHING ..WHEN I AM CLICKING ON MY POWER BOTTON ,NO SONY LOGO NO VIBRATION JUST GREEN LIGHT LED BLINKS VERY DIM
PLZZ GUYS HELP ME ,:crying::crying::crying::crying::crying::crying::crying:
18/021/2012 23:21:51 - INFO - <- This level is successfully initialized
18/021/2012 23:21:51 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
18/021/2012 23:21:51 - INFO - You can drag and drop ftf files here to start flashing them
18/021/2012 23:21:56 - INFO - Device disconnected
18/021/2012 23:21:57 - INFO - Selected Ne0V_4.0.2.A.0.42.ftf
18/021/2012 23:21:57 - INFO - Preparing files for flashing
18/022/2012 23:22:21 - INFO - Please connect your device into flashmode.
18/022/2012 23:22:41 - INFO - Device connected in flash mode
18/022/2012 23:22:41 - INFO - Opening device for R/W
18/022/2012 23:22:41 - INFO - Reading device information
18/022/2012 23:22:41 - INFO - Phone reading for flashing.
18/022/2012 23:22:41 - INFO - Start Flashing
18/022/2012 23:22:41 - INFO - Flashing loader
18/022/2012 23:22:44 - INFO - Loader version : R4A066 / Bootloader status : ROOTED
18/022/2012 23:22:44 - INFO - Flashing adsp.sin
18/022/2012 23:22:46 - INFO - Flashing kernel.sin
18/022/2012 23:22:49 - INFO - Flashing amss_fs.sin
18/022/2012 23:22:49 - INFO - Flashing fota1.sin
18/022/2012 23:22:50 - INFO - Flashing fota0.sin
18/022/2012 23:22:50 - INFO - Flashing apps_log.sin
18/022/2012 23:22:51 - INFO - Flashing amss.sin
18/023/2012 23:23:00 - INFO - Flashing cache.sin
18/023/2012 23:23:00 - INFO - Flashing system.sin
18/025/2012 23:25:08 - INFO - Flashing userdata.sin
18/025/2012 23:25:10 - INFO - Flashing finished.
18/025/2012 23:25:10 - INFO - Please wait. Phone will reboot
18/025/2012 23:25:10 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
18/025/2012 23:25:10 - INFO - Device connected in flash mode
18/025/2012 23:25:11 - INFO - Device disconnected
18/025/2012 23:25:13 - INFO - Device connected in flash mode
18/025/2012 23:25:54 - INFO - Device disconnected
18/025/2012 23:25:55 - INFO - Device connected in flash mode
18/026/2012 23:26:36 - INFO - Device disconnected
18/026/2012 23:26:38 - INFO - Device connected in flash mode
18/027/2012 23:27:19 - INFO - Device disconnected
18/027/2012 23:27:20 - INFO - Device connected in flash mode
pull out the Battery and wait a minute or 2 and try again.
why not using the current Flashtool ?
greetings
coosees said:
pull out the battery and wait a minute or 2 and try again.
Why not using the current flashtool ?
Greetings
Click to expand...
Click to collapse
yar done that also prob is same ....does seus can solve my prob , if yes from where to download it and from where i can download current flashtool
john abrahim said:
yar done that also prob is same ....does seus can solve my prob , if yes from where to download it and from where i can download current flashtool
Click to expand...
Click to collapse
try SUS --> http://www.sonymobile.com/global-en/tools/update-service/
but this will Install the current ICS ( .587 )
Flashtool --> http://androxyde.github.com/
don't be so lazy, use search next time pls :cyclops:
no offence :angel:
greetings
coosees said:
try sus --> http://www.sonymobile.com/global-en/tools/update-service/
but this will install the current ics ( .587 )
flashtool --> http://androxyde.github.com/
don't be so lazy, use search next time pls :cyclops:
No offence :angel:
Greetings
Click to expand...
Click to collapse
thanks bro will try with this...
Update my phone with seus ,its showing successfully updated but still the prob is same , green dim light blinking when i am switching on my phone.and its not switching on ...plzz tell me what going on with my phone , what to do. Is this a battery prob , but i have externally charged my phone
[/COLOR]Next time search a bit.
http://forum.xda-developers.com/showthread.php?t=1694008
Sent from my Xperia NeoV using xda app-developers app
Did u try seus with other computer ?
seNt froM My bustEr Neo v <3
adity said:
[/COLOR]Next time search a bit.
http://forum.xda-developers.com/showthread.php?t=1694008
Sent from my Xperia NeoV using xda app-developers app
Click to expand...
Click to collapse
BRO I HAVE ALREADY SEARCHED IT , MY PROB IS MY PHONE IS NOT RESTARTING
I HAV FLASHED MANY TIMES .42,,,.62,,,,.587 TFT FILES FLASHING SUCCESSFUL BUT PHN NOT SWITCHING ON
EVEN USED SEUD STILL RESULT SAME
GUYS I BADLY NEED UR HELP ....:crying::crying:
john abrahim said:
BRO I HAVE ALREADY SEARCHED IT , MY PROB IS MY PHONE IS NOT RESTARTING
I HAV FLASHED MANY TIMES .42,,,.62,,,,.587 TFT FILES FLASHING SUCCESSFUL BUT PHN NOT SWITCHING ON
EVEN USED SEUD STILL RESULT SAME
GUYS I BADLY NEED UR HELP ....:crying::crying:
Click to expand...
Click to collapse
Then my friend you should get it to service center.
Cuz by the looks of it you have tried every possible thing to revive your phone.
But many people who retorted the same problem as yours got their phones fixed by choosing repair option in seus
Sent from my Xperia NeoV using xda app-developers app
adity said:
Then my friend you should get it to service center.
Cuz by the looks of it you have tried every possible thing to revive your phone.
But many people who retorted the same problem as yours got their phones fixed by choosing repair option in seus
Sent from my Xperia NeoV using xda app-developers app
Click to expand...
Click to collapse
bro in worst case what max damage could have done with my phone and my phone is rooted and boot loader unloacked , will i get the warranty
john abrahim said:
bro in worst case what max damage could have done with my phone and my phone is rooted and boot loader unloacked , will i get the warranty
Click to expand...
Click to collapse
I read in an article that Sony will give warranty if the damage is not due to the flashing of custom ROM or rooting.
Sent from my Xperia NeoV using xda app-developers app
adity said:
I read in an article that Sony will give warranty if the damage is not due to the flashing of custom ROM or rooting.
Sent from my Xperia NeoV using xda app-developers app
Click to expand...
Click to collapse
guys plz help me with some solution led green blinking is my phone dead ...????????
Have you tried those steps?

[SOLVED]is there special usb jig to directly make bootloader enter download mode?

i have a friend using samsung galaxy s2, and he said he is using some special modified usb that will make the bootloader enter download mode so that he flashed original firmware into his phone after it is bricked...
for x10 mini pro is there such cable? i need it because i think my phone is hardbricked...
it is bootloader unlocked and i flashed the original stock rom into the phone(in attempt to save condition where flashing customised kernel wasnt successful and it keep bootlooping...), and now i cant root it, cant On the phone to enter usb debugging mode, i cant do anything about it, i read so many threads but really didnt help me... , i can say that i tried all of them already...the phone just keep bootlooping the sony erricson logo on and off... using SEUS also didnt help because it shows i have latest version... and now i cant even flash other kernels because flashtool will show some error anyone facing this problem before? before i throw my phone my last hope will be the special usb that i want to find
jasonmiracle said:
i have a friend using samsung galaxy s2, and he said he is using some special modified usb that will make the bootloader enter download mode so that he flashed original firmware into his phone after it is bricked...
for x10 mini pro is there such cable? i need it because i think my phone is hardbricked...
it is bootloader unlocked and i flashed the original stock rom into the phone(in attempt to save condition where flashing customised kernel wasnt successful and it keep bootlooping...), and now i cant root it, cant On the phone to enter usb debugging mode, i cant do anything about it, i read so many threads but really didnt help me... , i can say that i tried all of them already...the phone just keep bootlooping the sony erricson logo on and off... using SEUS also didnt help because it shows i have latest version... and now i cant even flash other kernels because flashtool will show some error anyone facing this problem before? before i throw my phone my last hope will be the special usb that i want to find
Click to expand...
Click to collapse
Samsung phones can only be flashed using special cables, that is true, but SE provided a flashmode that always works, by turning off your phone and pressing the back-button before you plug in your usb-cable... In regards to that they're miles ahead of Samsung. Do you know how to get to Repair mode in SEUS or PC Companion?
SmG67 said:
Samsung phones can only be flashed using special cables, that is true, but SE provided a flashmode that always works, by turning off your phone and pressing the back-button before you plug in your usb-cable... In regards to that they're miles ahead of Samsung. Do you know how to get to Repair mode in SEUS or PC Companion?
Click to expand...
Click to collapse
the repair mode is something like flashing it using flashtool right? wait for the screen asking to connect with flashmode, off phone, press back button then plug in usb, but then SEUS shows i am having newest software? there is guide to make SEUS identify i am not having newest software version, but that is by turning on the phone, and getting file manager to edit something .prop files?
but sadly i really cant do that because i cant even turn on my phone now... what should i do? any other way to change the files inside my phone to make the SEUS detect i am not newest software so that it can download and flash the original rom inside my phone?
jasonmiracle said:
the repair mode is something like flashing it using flashtool right? wait for the screen asking to connect with flashmode, off phone, press back button then plug in usb, but then SEUS shows i am having newest software? there is guide to make SEUS identify i am not having newest software version, but that is by turning on the phone, and getting file manager to edit something .prop files?
but sadly i really cant do that because i cant even turn on my phone now... what should i do? any other way to change the files inside my phone to make the SEUS detect i am not newest software so that it can download and flash the original rom inside my phone?
Click to expand...
Click to collapse
Try to flash THIS with flashtool, it's complete latest (2.1.1.A.0.6) firmware (Kernel and ROM) from SE.
(It comes in at about 213.5MB, although the site may report it's smaller. It will keep downloading until it's done though)
SmG67 said:
Try to flash ubuntuone.com/16ffDIwsKeeof1ILUZrL55 with flashtool, it's complete latest (2.1.1.A.0.6) firmware (Kernel and ROM) from SE.
(It comes in at about 213.5MB, although the site may report it's smaller. It will keep downloading until it's done though)
Click to expand...
Click to collapse
alright let me try this... nice ubuntuone...fast download speed
SmG67 said:
Try to flash [with flashtool, it's complete latest (2.1.1.A.0.6) firmware (Kernel and ROM) from SE.
(It comes in at about 213.5MB, although the site may report it's smaller. It will keep downloading until it's done though)
Click to expand...
Click to collapse
01/000/2012 23:00:05 - INFO - Selected U20_2.1.1.A.0.6_Unbranded_unlockedBL.ftf
01/000/2012 23:00:05 - INFO - Preparing files for flashing
01/001/2012 23:01:07 - INFO - Please connect your device into flashmode.
01/001/2012 23:01:19 - INFO - Device connected in flash mode
01/001/2012 23:01:20 - INFO - Opening device for R/W
01/001/2012 23:01:20 - INFO - Reading device information
01/001/2012 23:01:20 - INFO - Phone ready for flashmode operations.
01/001/2012 23:01:21 - INFO - Start Flashing
01/001/2012 23:01:21 - INFO - Processing loader
01/001/2012 23:01:21 - INFO - Checking header
01/001/2012 23:01:21 - INFO - Ending flash session
01/001/2012 23:01:21 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
Click to expand...
Click to collapse
not working...do i have to flash all the .sin files? this error caused by me choosing all the .sin files... last hope..
jasonmiracle said:
not working...do i have to flash all the .sin files? this error caused by me choosing all the .sin files... last hope..
Click to expand...
Click to collapse
You said your bootloader was unlocked.. That doesn't seem to be the case...
Try This one, for locked bootloader instead.
SmG67 said:
You said your bootloader was unlocked.. That doesn't seem to be the case...
Try This one, for locked bootloader instead.
Click to expand...
Click to collapse
yup, problem i cant flash roms other than stock roms because of locked bootloader...now i can only flash stock kernel, but cant update via SEUS/PCC because it cant detect newest version, probably because of 2.1update 1 version...do you have version 2.1 stock kernel? just wanna try other alternatives... by flashing stock older rom, hopefully SEUS will update it to 2.1update1 version...so far method that you provided now, and method that i think now is the last 2 method...
jasonmiracle said:
yup, problem i cant flash roms other than stock roms because of locked bootloader...now i can only flash stock kernel, but cant update via SEUS/PCC because it cant detect newest version, probably because of 2.1update 1 version...do you have version 2.1 stock kernel? just wanna try other alternatives... by flashing stock older rom, hopefully SEUS will update it to 2.1update1 version...so far method that you provided now, and method that i think now is the last 2 method...
Click to expand...
Click to collapse
Did you try to flash my latest suggestion and just boot up your phone?
SmG67 said:
Did you try to flash my latest suggestion and just boot up your phone?
Click to expand...
Click to collapse
man, your BL unlocked rom works like charm!!! so far flashing fine!!! 62% now... praying that no error pops out...
SmG67 said:
Did you try to flash my latest suggestion and just boot up your phone?
Click to expand...
Click to collapse
bro, THANKS for your BL locked stock firmware!!! it worked!!! my phone booted, now i am choosing languages!! where did you get that .ftf thing? really a lifesaver...
but one more question, now that i can turn on my phone, that i want to flash other roms, i have to root my phone and unlock BL flash with custom kernel, and flash other roms right? this is my first flashing thats why took so long time digging, finally i got solution from you today when i gave up hope and asked question on xda :good:
02/011/2012 00:11:31 - INFO - Selected U20_2.1.1.A.0.6_Unbranded_lockedBL.ftf
02/011/2012 00:11:31 - INFO - Preparing files for flashing
02/011/2012 00:11:34 - INFO - Please connect your device into flashmode.
02/012/2012 00:12:09 - INFO - Flash canceled
02/012/2012 00:12:19 - INFO - Selected U20_2.1.1.A.0.6_Unbranded_lockedBL.ftf
02/012/2012 00:12:19 - INFO - Preparing files for flashing
02/012/2012 00:12:21 - INFO - Please connect your device into flashmode.
02/012/2012 00:12:28 - INFO - Device connected in flash mode
02/012/2012 00:12:29 - INFO - Opening device for R/W
02/012/2012 00:12:29 - INFO - Device connected in flash mode
02/012/2012 00:12:29 - INFO - Reading device information
02/012/2012 00:12:29 - INFO - Phone ready for flashmode operations.
02/012/2012 00:12:29 - INFO - Start Flashing
02/012/2012 00:12:29 - INFO - Processing loader
02/012/2012 00:12:29 - INFO - Checking header
02/012/2012 00:12:29 - INFO - Flashing data
02/012/2012 00:12:31 - INFO - Loader : S1_Loader_Root_8e35 - Version : R4A045 / Bootloader status : UNROOTABLE
02/012/2012 00:12:32 - INFO - Processing kernel.sin
02/012/2012 00:12:32 - INFO - Checking header
02/012/2012 00:12:32 - INFO - Flashing data
02/012/2012 00:12:35 - INFO - Processing fota1.sin
02/012/2012 00:12:35 - INFO - Checking header
02/012/2012 00:12:35 - INFO - Flashing data
02/012/2012 00:12:35 - INFO - Processing fota0.sin
02/012/2012 00:12:35 - INFO - Checking header
02/012/2012 00:12:35 - INFO - Flashing data
02/012/2012 00:12:36 - INFO - Processing amss_fs.sin
02/012/2012 00:12:36 - INFO - Checking header
02/012/2012 00:12:36 - INFO - Flashing data
02/012/2012 00:12:36 - INFO - Processing amss.sin
02/012/2012 00:12:36 - INFO - Checking header
02/012/2012 00:12:36 - INFO - Flashing data
02/012/2012 00:12:55 - INFO - Processing system.sin
02/012/2012 00:12:55 - INFO - Checking header
02/012/2012 00:12:55 - INFO - Flashing data
02/014/2012 00:14:42 - INFO - Processing userdata.sin
02/014/2012 00:14:42 - INFO - Checking header
02/014/2012 00:14:42 - INFO - Flashing data
02/014/2012 00:14:52 - INFO - Processing cache.sin
02/014/2012 00:14:52 - INFO - Checking header
02/014/2012 00:14:52 - INFO - Flashing data
02/014/2012 00:14:52 - INFO - Ending flash session
02/014/2012 00:14:52 - INFO - Flashing finished.
02/014/2012 00:14:52 - INFO - Please unplug and start your phone
02/014/2012 00:14:52 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
02/014/2012 00:14:53 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
jasonmiracle said:
bro, THANKS for your BL locked stock firmware!!! it worked!!! my phone booted, now i am choosing languages!! where did you get that .ftf thing? really a lifesaver...
but one more question, now that i can turn on my phone, that i want to flash other roms, i have to root my phone and unlock BL flash with custom kernel, and flash other roms right? this is my first flashing thats why took so long time digging, finally i got solution from you today when i gave up hope and asked question on xda :good:
Click to expand...
Click to collapse
Yeh, you got it That is the basic procedure. As long as you follow the instructions in the kernel and rom threads carefully you should be ok.
The .ftf is made from the Sony Ericsson firmware that gets downloaded when you repair using SEUS or PC Companion. Not everyone can use the repair-option, that's why i keep it lying around
SmG67 said:
Yeh, you got it That is the basic procedure. As long as you follow the instructions in the kernel and rom threads carefully you should be ok.
The .ftf is made from the Sony Ericsson firmware that gets downloaded when you repair using SEUS or PC Companion. Not everyone can use the repair-option, that's why i keep it lying around
Click to expand...
Click to collapse
thats really a lifesaver ... these weeks i kept digging about other ways other than SEUS... until i know that my phone is Soft bricked, i think there is other ways to solve it :victory: thanks to you flashing custom roms now glad that i have phones to use again waiting for the nexus
SmG67 said:
Yeh, you got it That is the basic procedure. As long as you follow the instructions in the kernel and rom threads carefully you should be ok.
The .ftf is made from the Sony Ericsson firmware that gets downloaded when you repair using SEUS or PC Companion. Not everyone can use the repair-option, that's why i keep it lying around
Click to expand...
Click to collapse
but i wonder why i flashed nna's jb kernels or ics kernels, my phone got into bootloop unable to start up? bootloop at nna loader... thats the problem last time that kept me trying many things and messed up my phone..
jasonmiracle said:
but i wonder why i flashed nna's jb kernels or ics kernels, my phone got into bootloop unable to start up? bootloop at nna loader... thats the problem last time that kept me trying many things and messed up my phone..
Click to expand...
Click to collapse
Follow the instructions carefully, for JB you need to do wipe data/factory reset (in xRecovery or CWM) before you flash the new kernel, and you have to format /system partition in mount and storage menu of CWM to get the proper partition size. After that you install the nAa's JB ROM and appropriate Google Apps, and if that is successful, wipe data/factory reset, wipe cache and in advanced menu wipe dalvik-cache and wipe batterystats... Then Reboot and wait...
SmG67 said:
Follow the instructions carefully, for JB you need to do wipe data/factory reset (in xRecovery or CWM) before you flash the new kernel, and you have to format /system partition in mount and storage menu of CWM to get the proper partition size. After that you install the nAa's JB ROM and appropriate Google Apps, and if that is successful, wipe data/factory reset, wipe cache and in advanced menu wipe dalvik-cache and wipe batterystats... Then Reboot and wait...
Click to expand...
Click to collapse
as what you said i only did not wipe data/factory reset, wipe cache and in advanced menu wipe dalvik-cache and wipe batterystats then Reboot after successful flashing gapps and rom...

Categories

Resources