THE PROB IS PHONE IS NOT SWITCHNG ON MANUALLY AND NOT EVEN AFTER FLASHING ..WHEN I AM CLICKING ON MY POWER BOTTON ,NO SONY LOGO NO VIBRATION JUST GREEN LIGHT LED BLINKS VERY DIM
PLZZ GUYS HELP ME ,:crying::crying::crying::crying::crying::crying::crying:
18/021/2012 23:21:51 - INFO - <- This level is successfully initialized
18/021/2012 23:21:51 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
18/021/2012 23:21:51 - INFO - You can drag and drop ftf files here to start flashing them
18/021/2012 23:21:56 - INFO - Device disconnected
18/021/2012 23:21:57 - INFO - Selected Ne0V_4.0.2.A.0.42.ftf
18/021/2012 23:21:57 - INFO - Preparing files for flashing
18/022/2012 23:22:21 - INFO - Please connect your device into flashmode.
18/022/2012 23:22:41 - INFO - Device connected in flash mode
18/022/2012 23:22:41 - INFO - Opening device for R/W
18/022/2012 23:22:41 - INFO - Reading device information
18/022/2012 23:22:41 - INFO - Phone reading for flashing.
18/022/2012 23:22:41 - INFO - Start Flashing
18/022/2012 23:22:41 - INFO - Flashing loader
18/022/2012 23:22:44 - INFO - Loader version : R4A066 / Bootloader status : ROOTED
18/022/2012 23:22:44 - INFO - Flashing adsp.sin
18/022/2012 23:22:46 - INFO - Flashing kernel.sin
18/022/2012 23:22:49 - INFO - Flashing amss_fs.sin
18/022/2012 23:22:49 - INFO - Flashing fota1.sin
18/022/2012 23:22:50 - INFO - Flashing fota0.sin
18/022/2012 23:22:50 - INFO - Flashing apps_log.sin
18/022/2012 23:22:51 - INFO - Flashing amss.sin
18/023/2012 23:23:00 - INFO - Flashing cache.sin
18/023/2012 23:23:00 - INFO - Flashing system.sin
18/025/2012 23:25:08 - INFO - Flashing userdata.sin
18/025/2012 23:25:10 - INFO - Flashing finished.
18/025/2012 23:25:10 - INFO - Please wait. Phone will reboot
18/025/2012 23:25:10 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
18/025/2012 23:25:10 - INFO - Device connected in flash mode
18/025/2012 23:25:11 - INFO - Device disconnected
18/025/2012 23:25:13 - INFO - Device connected in flash mode
18/025/2012 23:25:54 - INFO - Device disconnected
18/025/2012 23:25:55 - INFO - Device connected in flash mode
18/026/2012 23:26:36 - INFO - Device disconnected
18/026/2012 23:26:38 - INFO - Device connected in flash mode
18/027/2012 23:27:19 - INFO - Device disconnected
18/027/2012 23:27:20 - INFO - Device connected in flash mode
pull out the Battery and wait a minute or 2 and try again.
why not using the current Flashtool ?
greetings
coosees said:
pull out the battery and wait a minute or 2 and try again.
Why not using the current flashtool ?
Greetings
Click to expand...
Click to collapse
yar done that also prob is same ....does seus can solve my prob , if yes from where to download it and from where i can download current flashtool
john abrahim said:
yar done that also prob is same ....does seus can solve my prob , if yes from where to download it and from where i can download current flashtool
Click to expand...
Click to collapse
try SUS --> http://www.sonymobile.com/global-en/tools/update-service/
but this will Install the current ICS ( .587 )
Flashtool --> http://androxyde.github.com/
don't be so lazy, use search next time pls :cyclops:
no offence :angel:
greetings
coosees said:
try sus --> http://www.sonymobile.com/global-en/tools/update-service/
but this will install the current ics ( .587 )
flashtool --> http://androxyde.github.com/
don't be so lazy, use search next time pls :cyclops:
No offence :angel:
Greetings
Click to expand...
Click to collapse
thanks bro will try with this...
Update my phone with seus ,its showing successfully updated but still the prob is same , green dim light blinking when i am switching on my phone.and its not switching on ...plzz tell me what going on with my phone , what to do. Is this a battery prob , but i have externally charged my phone
[/COLOR]Next time search a bit.
http://forum.xda-developers.com/showthread.php?t=1694008
Sent from my Xperia NeoV using xda app-developers app
Did u try seus with other computer ?
seNt froM My bustEr Neo v <3
adity said:
[/COLOR]Next time search a bit.
http://forum.xda-developers.com/showthread.php?t=1694008
Sent from my Xperia NeoV using xda app-developers app
Click to expand...
Click to collapse
BRO I HAVE ALREADY SEARCHED IT , MY PROB IS MY PHONE IS NOT RESTARTING
I HAV FLASHED MANY TIMES .42,,,.62,,,,.587 TFT FILES FLASHING SUCCESSFUL BUT PHN NOT SWITCHING ON
EVEN USED SEUD STILL RESULT SAME
GUYS I BADLY NEED UR HELP ....:crying::crying:
john abrahim said:
BRO I HAVE ALREADY SEARCHED IT , MY PROB IS MY PHONE IS NOT RESTARTING
I HAV FLASHED MANY TIMES .42,,,.62,,,,.587 TFT FILES FLASHING SUCCESSFUL BUT PHN NOT SWITCHING ON
EVEN USED SEUD STILL RESULT SAME
GUYS I BADLY NEED UR HELP ....:crying::crying:
Click to expand...
Click to collapse
Then my friend you should get it to service center.
Cuz by the looks of it you have tried every possible thing to revive your phone.
But many people who retorted the same problem as yours got their phones fixed by choosing repair option in seus
Sent from my Xperia NeoV using xda app-developers app
adity said:
Then my friend you should get it to service center.
Cuz by the looks of it you have tried every possible thing to revive your phone.
But many people who retorted the same problem as yours got their phones fixed by choosing repair option in seus
Sent from my Xperia NeoV using xda app-developers app
Click to expand...
Click to collapse
bro in worst case what max damage could have done with my phone and my phone is rooted and boot loader unloacked , will i get the warranty
john abrahim said:
bro in worst case what max damage could have done with my phone and my phone is rooted and boot loader unloacked , will i get the warranty
Click to expand...
Click to collapse
I read in an article that Sony will give warranty if the damage is not due to the flashing of custom ROM or rooting.
Sent from my Xperia NeoV using xda app-developers app
adity said:
I read in an article that Sony will give warranty if the damage is not due to the flashing of custom ROM or rooting.
Sent from my Xperia NeoV using xda app-developers app
Click to expand...
Click to collapse
guys plz help me with some solution led green blinking is my phone dead ...????????
Have you tried those steps?
Related
Hi,
I have this behavior in my u20i phone that the phone will not boot. When i connect it to my PC, the PC detects the phone momentarily for around 5 seconds and then it disconnects and this will continue until i disconnect it. Does this mean my phone is bricked? Is this what a bootloop is? I read many threads on this forum, and for whoever was facing the problem of bootloop, he was atleast getting SE logo.
Now coming to my problem, i used s1tool to get the present details of my phone and it shows the following:
RUNNING S1_EROM VER "R8A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0020/00BC"
LOADER VERSION: "R4A045"
MODEL (from GDFS): U20i
SOFTWARE VERSION: 1235-3411_2.1.1.A.0.6
CUSTOM VERSION: 1238-7170_R4B
.
.
SEMC SIMLOCK CERTIFICATE
The loader version tells me that the bootloader is not unlocked. Tried using SEUS update service to fix my phone back, but after completion, i still am stuck with this boot-looping. Any other suggestions? Any more information required to debug my problem? I had installed a custom rom which was working well (MiniCM7Pro_V21) until i restarted my phone which is when i got this problem. (had got a problem like this before but using SEUS had worked that time)
I can enter the flashmode of the phone atleast but thats it (this gives me some glimmer of hope )
My last resort will be to give my phone to the SE service guys but i wanna know what the problem is before i give it to them.
try again using SEUS????
Yashu1019 said:
try again using SEUS????
Click to expand...
Click to collapse
Already tried both SEUS and also using PCCompanion repair option, none of them are working for me...
Looks like a dying post faiyyaz helping out, but has come to a point where hez stuck, but anyway thanks a lot faiyyaz...Man, i just dont wanna give up and give it so SE guys, want to fix it my way...Anyway, any more suggestions will be helpful...
Attaching the messages exchanged:
faiyyaz said:
R[O]K.O. said:
faiyyaz said:
R[O]K.O. said:
Hi, Its regarding a question i posted on xda developers, http://forum.xda-developers.com/showthread.php?t=1518652
Any help would be very much appreciated...
Click to expand...
Click to collapse
bro.. u aren't getting the Sony Ericsson logo when turn on?? n just to clear your confusion your bootloader is locked o no worries of that.. n 2ndly did u try the latest SEUS..? if not give it a try.. if not working PM again .
Click to expand...
Click to collapse
Used SEUS 2.12.3.5, got a successful message at the end, disconnected the phone and started the phone back again, but problem still exists...Any other ideas i can try out?
Click to expand...
Click to collapse
well that's weird.. i think the only way u can get it working is as you can get into flashmode, you can unlock bootloader then flash the nAa kernel as its got inbuilt CWM recovery,so u can get into recovery mode.. then u can flash a custom ROM.. a perfect ROM would be MiniCm7 by nAa itself n then if u want to get back to stock.. u may flash stock kernel.. then relock bootloader n then use SEUS to get back to Stock ROM.. its a long proceduce but i think it shall work.. if any query fell free to ask.hope that helps you
note: Make sure your following proper instructions while unlocking bootloader , use my tool if u want SE Tweaker Tool n follow correct instruction n read its main thread before u use it..
Click to expand...
Click to collapse
faiyyaz said:
R[O]K.O. said:
Oh and 1 more thing, how can i enable USB debugging when i cannot switch on the phone, by any external means possible?
Click to expand...
Click to collapse
Well sorry mate.. But I thought ur usb debugging might be on.. so I guess the unlock bootloader thing wont work for u.. Maybe u should try givin it to the service center if its under gaurante.. Else il see if there is any other way u can through..
Sent from my U20i using xda premium
Click to expand...
Click to collapse
Hmm. Tricky. Have you tried using Flashtool to put a stock firmware back on?
Sent from my U20i using XDA App
Ticklefish said:
Hmm. Tricky. Have you tried using Flashtool to put a stock firmware back on?
Sent from my U20i using XDA App
Click to expand...
Click to collapse
Just tried it a few mins back, heres what i had on the flashtool disp:
03/030/2012 02:30:56 - INFO - Selected U20i_2.1.1.A.0.6_Baseband_015.ftf
03/030/2012 02:30:56 - INFO - Preparing files for flashing
03/030/2012 02:30:56 - INFO - Please connect your device into flashmode.
03/031/2012 02:31:03 - INFO - Device connected in flash mode
03/031/2012 02:31:03 - INFO - Opening device for R/W
03/031/2012 02:31:03 - INFO - Reading device information
03/031/2012 02:31:03 - INFO - Phone reading for flashing.
03/031/2012 02:31:03 - INFO - Start Flashing
03/031/2012 02:31:03 - INFO - Flashing loader
03/031/2012 02:31:05 - INFO - Loader version : R4A045 / Bootloader status : UNROOTABLE
03/031/2012 02:31:05 - INFO - Flashing amss_fs.sin
03/031/2012 02:31:05 - INFO - Flashing cache.sin
03/031/2012 02:31:06 - INFO - Flashing fota1.sin
03/031/2012 02:31:06 - INFO - Flashing kernel.sin
03/031/2012 02:31:10 - INFO - Flashing amss.sin
03/031/2012 02:31:21 - INFO - Flashing fota0.sin
03/031/2012 02:31:22 - INFO - Flashing finished.
03/031/2012 02:31:22 - INFO - Please wait. Phone will reboot
03/031/2012 02:31:22 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
03/031/2012 02:31:22 - INFO - Device connected in flash mode
03/031/2012 02:31:23 - INFO - Device disconnected
03/031/2012 02:31:25 - INFO - Device connected in flash mode
03/031/2012 02:31:49 - INFO - Device disconnected
03/031/2012 02:31:55 - INFO - Device connected with USB debugging off
Click to expand...
Click to collapse
Tried starting the phone but am having the same problem still...
Have given the phone today to the SE guys, will let you guys knw if it gets fixed or not (they tried updating, said they used some factory sent updater which didn't work after which they said its a hardware issue, which somehow i doubt)...
Got my phone back today and its in good working condition. They said they replaced the flexicable of my minipro which was faulty. Anyway am happy that its working now and am ready to flash a rom into it again Thanks for all your help and suggestions...
Hello guys, this is what happened to me yesterday. I wanted to flash stock ics to my SXS via flashtool. The problem was that flash tool got stuck at 2% so I thought I needs some time and left it there for quite some time, when I came back it was still at 2%. I didn't see any other option to unplug my phone. When I powered it on sony boot logo appeared and a phone with exclamation mark. I tried to repeat flash process and got the same result. Tried with 2 different pc-s, different usb ports/cables and older versions of flash tool. Still the problem is there :S
Any solution to this?
P.S Oh one more thing I can flash kernel successfully and I did, I actually can get into recovery and restore, but unfortunly problems remains.
simi318 said:
Hello guys, this is what happened to me yesterday. I wanted to flash stock ics to my SXS via flashtool. The problem was that flash tool got stuck at 2% so I thought I needs some time and left it there for quite some time, when I came back it was still at 2%. I didn't see any other option to unplug my phone. When I powered it on sony boot logo appeared and a phone with exclamation mark. I tried to repeat flash process and got the same result. Tried with 2 different pc-s, different usb ports/cables and older versions of flash tool. Still the problem is there :S
Any solution to this?
P.S Oh one more thing I can flash kernel successfully and I did, I actually can get into recovery and restore, but unfortunly problems remains.
Click to expand...
Click to collapse
Try flashing another Rom....!
Sent from my ST25i using xda app-developers app
I did, but for some unknown reason I always get stuck here
30/002/2012 11:02:34 - INFO - <- This level is successfully initialized
30/002/2012 11:02:34 - INFO - Flashtool Version 0.9.7.0 built on 2012-09-27 22:53:38
30/002/2012 11:02:34 - INFO - You can drag and drop ftf files here to start flashing them
30/002/2012 11:02:39 - INFO - Device disconnected
30/002/2012 11:02:54 - INFO - Selected LT26i_4.0.4_R4G-6.1.A.0.453_Customized UK 1257-3921.ftf
30/002/2012 11:02:54 - INFO - Preparing files for flashing
30/003/2012 11:03:12 - INFO - Please connect your device into flashmode.
30/003/2012 11:03:16 - INFO - Device connected in flash mode
30/003/2012 11:03:16 - INFO - Opening device for R/W
30/003/2012 11:03:16 - INFO - Reading device information
30/003/2012 11:03:16 - INFO - Phone ready for flashmode operations.
30/003/2012 11:03:16 - INFO - Start Flashing
30/003/2012 11:03:16 - INFO - Processing loader
30/003/2012 11:03:16 - INFO - Checking header
30/003/2012 11:03:17 - INFO - Flashing data
30/003/2012 11:03:19 - INFO - Loader : S1_Root_de72 - Version : R5C004 / Bootloader status : ROOTED
30/003/2012 11:03:19 - INFO - Disabling final data verification check
30/003/2012 11:03:19 - INFO - Processing partition-image.sin
30/003/2012 11:03:20 - INFO - Checking header
30/003/2012 11:03:20 - INFO - Flashing data
30/003/2012 11:03:22 - WARN - This file is ignored : simlock.ta
30/003/2012 11:03:22 - INFO - Processing kernel.sin
30/003/2012 11:03:22 - INFO - Checking header
30/003/2012 11:03:23 - INFO - Flashing data
30/003/2012 11:03:26 - INFO - Processing fotakernel.sin
30/003/2012 11:03:26 - INFO - Checking header
30/003/2012 11:03:26 - INFO - Flashing data
30/003/2012 11:03:29 - INFO - Processing amss_fs_2.sin
It doesn't go after that last line.
download the latest flashtool
Yeah latest flashtool or custom rom.. Which is better than stock anyways
Sent from my LT26i using xda app-developers app
Thanks for all replies, but I found solution myself. I flashed that tft to relock bootloader and voila my phone booted normally and it works like a charm now.
Best regards, Simon
Problem with Flash Tools 0.9.7
simi318 said:
Thanks for all replies, but I found solution myself. I flashed that tft to relock bootloader and voila my phone booted normally and it works like a charm now.
Best regards, Simon
Click to expand...
Click to collapse
X10Flasher needs to be replaced with older version (0.9.0 or 0.8.5). It's in the flashtool original thread posted by Androxyde:
"Found a bug on 0.9.7 avoiding flashing. Here is a quickfix
http://ul.to/szfl8gh7
Replace x10flasher.jar from 0.9.7 with this one (bug with flashing amss_fs_1)
Flashtool developper.
Last version : 0.9.7.0
Flashtool Homepage"
What is the problem here ?
Everytime when i try to make downgrade to my Xperia Z1 and i install flashtool this error appear .What i must to do? I try to make downgrade and i can't?Please help me !!!
Recently,I flashed an experimental CM9 based rom on my Xperia Sola,which made its touchscreen inoperable and also the hardware touch buttons.I reflashed stock ICS ftf,hoping that it can again make my touchscreen operable but it didn't.I searched many threads but i didn't find any solution for this.Also Xperia mini had the same problem.
Lastly i thought why not flash stock GB on it and i did and voila it worked again.
P.S:My Xperia Sola has unlocked bootloader,but i think the same will work for locked bootloader and don't say we can't install CM9 on locked bootloader because we CAN!!
And also the same method should work on all other Xperias.
akp.ajinkya said:
P.S:My Xperia Sola has locked bootloader,but i think the same will work for locked bootloader and don't say we can't install CM9 on locked bootloader because we CAN!!
And also the same method should work on all other Xperias.
Click to expand...
Click to collapse
Can we really install it on locked? You sure?
Then if we can why you had such a serious problem?
mirost1 said:
Can we really install it on locked? You sure?
Then if we can why you had such a serious problem?
Click to expand...
Click to collapse
Yes,i m sure bro(with some modifications of course)...i had this problem 'cause i was using some elements from a different device(experimentation)..so..
nice ur touchscreen is working again....
Sent from my Xperia U using Tapatalk 2
drsanket_xperia_u said:
nice ur touchscreen is working again....
Sent from my Xperia U using Tapatalk 2
Click to expand...
Click to collapse
Yep bro...got it working.I was going to give it to sony service center today...then thought why not give GB ftf a try....and i was lucky:highfive:.
akp.ajinkya said:
Recently,I flashed an experimental CM9 based rom on my Xperia Sola,which made its touchscreen inoperable and also the hardware touch buttons.I reflashed stock ICS ftf,hoping that it can again make my touchscreen operable but it didn't.I searched many threads but i didn't find any solution for this.Also Xperia mini had the same problem.
Lastly i thought why not flash stock GB on it and i did and voila it worked again.
P.S:My Xperia Sola has locked bootloader,but i think the same will work for locked bootloader and don't say we can't install CM9 on locked bootloader because we CAN!!
And also the same method should work on all other Xperias.
Click to expand...
Click to collapse
I have the same problem (bad flash). What do you mean " flash stock GB"?
Flash the stock gb ftf. Got the same problem and that fixed it. Gb rocks!
Sent from my Xperia Sola using Tapatalk 2
luometis said:
I have the same problem (bad flash). What do you mean " flash stock GB"?
Click to expand...
Click to collapse
I mean flashing stock Gingerbread firmware will solve your problem.
tadeas482 said:
Flash the stock gb ftf. Got the same problem and that fixed it. Gb rocks!
Sent from my Xperia Sola using Tapatalk 2
Click to expand...
Click to collapse
Yep..its fast and stable too...
Touch screen is not working after flashing
hi dear guys,
I have got the same trouble with my Sony Xperia Sola cell phone. I wanted to upgrade official installed Android to a higher version using SETools but accidentally I flashed ST27i (Xperia Go) on the phone. So the cell phone didnt turn on and I noticed what I have done!
then I reflashed it with MT27i (Xperia Sola) using SETools again but after the cell phone turned on, I noticed its touch screen is not working.
I reflashed it using Sony Flash Tools using many versions of Android but none of them worked.
any help would be appreciated
Thanks in advance
delphianrex said:
hi dear guys,
I have got the same trouble with my Sony Xperia Sola cell phone. I wanted to upgrade official installed Android to a higher version using SETools but accidentally I flashed ST27i (Xperia Go) on the phone. So the cell phone didnt turn on and I noticed what I have done!
then I reflashed it with MT27i (Xperia Sola) using SETools again but after the cell phone turned on, I noticed its touch screen is not working.
I reflashed it using Sony Flash Tools using many versions of Android but none of them worked.
any help would be appreciated
Thanks in advance
Click to expand...
Click to collapse
Flash xperia sola ftf file
Do not turn on
Then flash xperia go (the wrong ftf file)
Still dun turn it on
Then again flash the correct ftf file
Now turn on n see
If it works... Credit goes to mtakween for this trick
Firstly thanks for your reply dear friend,
I did what you said but unfortunately it didn't solve the problem!
drsanket_xperia_u said:
Flash xperia sola ftf file
Do not turn on
Then flash xperia go (the wrong ftf file)
Still dun turn it on
Then again flash the correct ftf file
Now turn on n see
If it works... Credit goes to mtakween for this trick
Click to expand...
Click to collapse
is it possible that the Touch sensor is destroyed or something?
I have flashed a lot of different editions of Rom files using Flash Tools and SETools but touch screen is not functioning yet!
could anybody help me plz?
help!!!
hey guys. please help me. i'd flash an ics fw via flashtool on my xperia sola last month ago. after flashing, i've find there was no problem. but accidentally, i leave my phone in my cabinet for two days that not using because we have a family vacation. when i arrive back to it and use it, the problem shown (i think that's too ridiculous because what problem will insist if you leave your phone idel)
and i have read a thread that why not flash again in gb fw. i did it but still not working -_-. note that i don't fall down the phone often and i think that the problem is not the touch screen. please help me . i'm about throw this phone because of frustration T.T
Davichi said:
hey guys. please help me. i'd flash an ics fw via flashtool on my xperia sola last month ago. after flashing, i've find there was no problem. but accidentally, i leave my phone in my cabinet for two days that not using because we have a family vacation. when i arrive back to it and use it, the problem shown (i think that's too ridiculous because what problem will insist if you leave your phone idel)
and i have read a thread that why not flash again in gb fw. i did it but still not working -_-. note that i don't fall down the phone often and i think that the problem is not the touch screen. please help me . i'm about throw this phone because of frustration T.T
Click to expand...
Click to collapse
Hey bro...try flashing ICS firmware using flashtool...switch on the phone...if it works then OK..if it doesn't then flash gingerbread firmware on it...then switch on and check...it should work now...also make sure u are flashing the right firmwares for your phone..Gud luck!!
delphianrex said:
is it possible that the Touch sensor is destroyed or something?
I have flashed a lot of different editions of Rom files using Flash Tools and SETools but touch screen is not functioning yet!
could anybody help me plz?
Click to expand...
Click to collapse
Yes..it is 100% plausible but it occurs mainly due to hardware failure such as dropping the cellphone,any impact on the touchscreen etc....but you may also try the soln given in my last post..may be it can help.
xperia u doesn't work after wrong firmware with flashtool
hiii ..
I am a newbie ..
help me please ..
I use my xperia u then use pcc ics update and all worked but after a few days I was using, my xperia is slow in all applications so I decided to restore to use flashtool GB and once again all normal successful but later on I want to try stock another GB rom, I too sloppy so until I entered the GB firmware for MT27i turns out after all that happened xperia finished I could not turn it on again :crying:but after i flash the stock rom again using ST25i GB can live longer but the touch screen does not work at all, maybe problem with 25/041/2013 02:41:40 - WARN - This file is ignored : simlock.ta ..
xperia please help me so I can be normal again
thank you ..
this is printscreen for my flashing..
25/040/2013 02:40:07 - INFO - <- This level is successfully initialized
25/040/2013 02:40:08 - INFO - Flashtool Version 0.9.2.0 built on 2012-09-03 22:15:45
25/040/2013 02:40:08 - INFO - You can drag and drop ftf files here to start flashing them
25/040/2013 02:40:17 - INFO - Device connected with USB debugging off
25/040/2013 02:40:17 - INFO - For 2011 devices line, be sure you are not in MTP mode
25/040/2013 02:40:20 - INFO - Selected ST25i_6.0.B.3.184_Generic_World.ftf
25/040/2013 02:40:20 - INFO - Preparing files for flashing
25/040/2013 02:40:39 - INFO - Please connect your device into flashmode.
25/040/2013 02:40:47 - INFO - Device disconnected
25/041/2013 02:41:39 - INFO - Device connected in flash mode
25/041/2013 02:41:39 - INFO - Opening device for R/W
25/041/2013 02:41:39 - INFO - Reading device information
25/041/2013 02:41:39 - INFO - Phone ready for flashmode operations.
25/041/2013 02:41:39 - INFO - Start Flashing
25/041/2013 02:41:39 - INFO - Processing loader
25/041/2013 02:41:39 - INFO - Checking header
25/041/2013 02:41:39 - INFO - Flashing data
25/041/2013 02:41:40 - INFO - Loader : S1_Root_3065 - Version : R5E006 / Bootloader status : ROOTABLE
25/041/2013 02:41:40 - INFO - Processing partition-image.sin
25/041/2013 02:41:40 - INFO - Checking header
25/041/2013 02:41:40 - INFO - Flashing data
25/041/2013 02:41:40 - WARN - This file is ignored : simlock.ta
25/041/2013 02:41:40 - INFO - Processing kernel.sin
25/041/2013 02:41:40 - INFO - Checking header
25/041/2013 02:41:40 - INFO - Flashing data
25/041/2013 02:41:41 - INFO - Processing fotakernel.sin
25/041/2013 02:41:41 - INFO - Checking header
25/041/2013 02:41:41 - INFO - Flashing data
25/041/2013 02:41:43 - INFO - Processing modemfs.sin
25/041/2013 02:41:43 - INFO - Checking header
25/041/2013 02:41:43 - INFO - Flashing data
25/041/2013 02:41:43 - INFO - Processing prcmu.sin
25/041/2013 02:41:43 - INFO - Checking header
25/041/2013 02:41:44 - INFO - Flashing data
25/041/2013 02:41:44 - INFO - Processing modem.sin
25/041/2013 02:41:44 - INFO - Checking header
25/041/2013 02:41:44 - INFO - Flashing data
25/041/2013 02:41:46 - INFO - Processing apps_log.sin
25/041/2013 02:41:46 - INFO - Checking header
25/041/2013 02:41:46 - INFO - Flashing data
25/041/2013 02:41:46 - INFO - Processing system.sin
25/041/2013 02:41:46 - INFO - Checking header
25/041/2013 02:41:46 - INFO - Flashing data
25/043/2013 02:43:34 - INFO - Processing userdata.sin
25/043/2013 02:43:34 - INFO - Checking header
25/043/2013 02:43:34 - INFO - Flashing data
25/043/2013 02:43:45 - INFO - Processing cache.sin
25/043/2013 02:43:45 - INFO - Checking header
25/043/2013 02:43:45 - INFO - Flashing data
25/043/2013 02:43:47 - INFO - Ending flash session
25/043/2013 02:43:47 - INFO - Flashing finished.
25/043/2013 02:43:47 - INFO - Please unplug and start your phone
25/043/2013 02:43:47 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
25/043/2013 02:43:47 - INFO - Device connected in flash mode
25/043/2013 02:43:56 - INFO - Device disconnected
delphianrex said:
hi dear guys,
I have got the same trouble with my Sony Xperia Sola cell phone. I wanted to upgrade official installed Android to a higher version using SETools but accidentally I flashed ST27i (Xperia Go) on the phone. So the cell phone didnt turn on and I noticed what I have done!
then I reflashed it with MT27i (Xperia Sola) using SETools again but after the cell phone turned on, I noticed its touch screen is not working.
I reflashed it using Sony Flash Tools using many versions of Android but none of them worked.
any help would be appreciated
Thanks in advance
Click to expand...
Click to collapse
Hey man I had the same problem , I flashed a mt27i with st27i files with setool , I did everything possible but the problem didn't solved , so I decided to change touchscreen and guess what !!!? it worked !!! I know it looks crazy but it works 100% so give it a try.
good luck.
delphianrex said:
is it possible that the Touch sensor is destroyed or something?
I have flashed a lot of different editions of Rom files using Flash Tools and SETools but touch screen is not functioning yet!
could anybody help me plz?
Click to expand...
Click to collapse
Yup that is a hard-break
If it was a soft-break the trick will work
It worked on my sola and on my xperia mini
Edit:Try this bro
Flash sola's GB ( don't turn on )
Flash go's wrong ftf ( dont turn on )
Flash SOLA' gb again ( dont turn on )
Flash Sola's ics ( u can now turn on lol)
That is it if it have not work then sorry it is a hard-break
---------- Post added at 11:21 AM ---------- Previous post was at 10:59 AM ----------
aryaputra_Q said:
hiii ..
I am a newbie ..
help me please ..
I use my xperia u then use pcc ics update and all worked but after a few days I was using, my xperia is slow in all applications so I decided to restore to use flashtool GB and once again all normal successful but later on I want to try stock another GB rom, I too sloppy so until I entered the GB firmware for MT27i turns out after all that happened xperia finished I could not turn it on again :crying:but after i flash the stock rom again using ST25i GB can live longer but the touch screen does not work at all, maybe problem with 25/041/2013 02:41:40 - WARN - This file is ignored : simlock.ta ..
xperia please help me so I can be normal again
thank you ..
No that Warn: appear when u flash an ics ftf ( forget why ) lol
U can try the tips/trick frim my latest post
Click to expand...
Click to collapse
ITS WORKS
Hey, thanks its works perfectly... my sola`s touch works again =) thanks and GB rockss!!!!!
Hello, help needed pls
My problem:
-Neo L vibrates when switched on but the screen stays black and the phone heats progressively.
- while on, it happened 2 times that the screen got black during the day. I could take a call once by flipping my finger on the black screen(phone was ringing).
What I tried to solve the issue after reading the forums:
-charge the phone, remove sd and sim card and start the phone. (succeeded 4 or 5 times out of around 50tries in 5 days, doesn't work anymore)
-update the phone and delete all my downloaded apps during the few times where the phone managed to start (didn't help)
-Used Sony PC companion to repair the phone (didn't help).
What I did not do:
- i didn't try flashing whatsoever or mess with the phone in any way(it's my first android phone). Really.
-As far as I know the phone did not receive a choc that could have caused the problem.
- i didn't try calling underwater. Aside from humidity i can not see any cause there
Any idea on how to solve this issue or the cause of the problem would be very helpful. Thanks.
First way
Use my mega guide for neo L in my sig below
And head over to that thread and find unbrick in there !
If that doesn't help then it's mean u can either go to sony or sell it
It is 100% hardware faulty if unbrick doesn't help :angel:
Good luck
Second way
By the way use SUS ! Don't use that suck PC Companion !
SUS is always great
Saingpor said:
First way
Use my mega guide for neo L in my sig below
And head over to that thread and find unbrick in there !
If that doesn't help then it's mean u can either go to sony or sell it
It is 100% hardware faulty if unbrick doesn't help :angel:
Good luck
Second way
By the way use SUS ! Don't use that suck PC Companion !
SUS is always great
Click to expand...
Click to collapse
Hello, thanks for the quick answer,
If you don't mind I think i will start with the second way..looks more reasonable. By SUS you mean Sony ericson Update Service I guess.
I didn't try flashing the phone, if second way doesn't work, do you still think unbrick is appropriate? will it void my warranty (valid in a faraway country)?
Thanks
smead221 said:
Hello, thanks for the quick answer,
If you don't mind I think i will start with the second way..looks more reasonable. By SUS you mean Sony ericson Update Service I guess.
I didn't try flashing the phone, if second way doesn't work, do you still think unbrick is appropriate? will it void my warranty (valid in a faraway country)?
Thanks
Click to expand...
Click to collapse
Unless u unlock BL then it will void your warranty !
I'd prefer flashtool over SUS ! :angel: In some case , what if your pc hang during downloading firmware via SUS ! What if it is in the middle of process ! For unbrick using flash method will be million time easier and save a lot of time !
How can flash ftf void your warranty ? Don't worry mate
Saingpor said:
Unless u unlock BL then it will void your warranty !
I'd prefer flashtool over SUS ! :angel: In some case , what if your pc hang during downloading firmware via SUS ! What if it is in the middle of process ! For unbrick using flash method will be million time easier and save a lot of time !
How can flash ftf void your warranty ? Don't worry mate
Click to expand...
Click to collapse
Sorry, I'm completely new to all this. I'll try as you say tonight after work, thanks again, will keep you updated.
smead221 said:
Sorry, I'm completely new to all this. I'll try as you say tonight after work, thanks again, will keep you updated.
Click to expand...
Click to collapse
Don't worry mate ! And a warm welcome to here !
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- THank to people when they are helping you / You are helped out / Be nice :angel:
Saingpor said:
Don't worry mate ! And a warm welcome to here !
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- THank to people when they are helping you / You are helped out / Be nice :angel:
Click to expand...
Click to collapse
So, here is first result at step 3 of flashing the device from flashtool:
25/023/2013 10:23:14 - INFO - Selected MT25i_4.1.B.0.631_SONY MOBILE by wewenk.ftf
25/023/2013 10:23:14 - INFO - Preparing files for flashing
25/023/2013 10:23:26 - INFO - Please connect your device into flashmode.
25/023/2013 10:23:32 - INFO - Opening device for R/W
25/023/2013 10:23:33 - INFO - Start Flashing
25/023/2013 10:23:33 - INFO - Processing loader
25/023/2013 10:23:33 - INFO - Checking header
25/023/2013 10:23:33 - INFO - Ending flash session
25/023/2013 10:23:33 - ERROR -
25/023/2013 10:23:33 - ERROR - Error flashing. Aborted
25/023/2013 10:23:34 - ERROR - Drivers need to be installed for connected device.
25/023/2013 10:23:34 - ERROR - You can find them in the drivers folder of Flashtool.
I installed flashmode driver after this, there was also drivers for different xperias but i didnt see the Neo L, was there just the flashmode driver to install manuall?
Anyway, second try gives this:
25/047/2013 10:47:23 - INFO - Device connected in flash mode
25/047/2013 10:47:32 - INFO - Selected MT25i_4.1.B.0.631_SONY MOBILE by wewenk.ftf
25/047/2013 10:47:32 - INFO - Preparing files for flashing
25/047/2013 10:47:48 - INFO - Please connect your device into flashmode.
25/047/2013 10:47:48 - INFO - Opening device for R/W
25/047/2013 10:47:48 - INFO - Start Flashing
25/047/2013 10:47:48 - INFO - Processing loader
25/047/2013 10:47:48 - INFO - Checking header
25/047/2013 10:47:48 - INFO - Ending flash session
25/047/2013 10:47:48 - ERROR -
25/047/2013 10:47:48 - ERROR - Error flashing. Aborted
25/047/2013 10:47:49 - INFO - Device connected in flash mode
Any idea of what went wrong?
smead221 said:
So, here is first result at step 3 of flashing the device from flashtool:
25/023/2013 10:23:14 - INFO - Selected MT25i_4.1.B.0.631_SONY MOBILE by wewenk.ftf
25/023/2013 10:23:14 - INFO - Preparing files for flashing
25/023/2013 10:23:26 - INFO - Please connect your device into flashmode.
25/023/2013 10:23:32 - INFO - Opening device for R/W
25/023/2013 10:23:33 - INFO - Start Flashing
25/023/2013 10:23:33 - INFO - Processing loader
25/023/2013 10:23:33 - INFO - Checking header
25/023/2013 10:23:33 - INFO - Ending flash session
25/023/2013 10:23:33 - ERROR -
25/023/2013 10:23:33 - ERROR - Error flashing. Aborted
25/023/2013 10:23:34 - ERROR - Drivers need to be installed for connected device.
25/023/2013 10:23:34 - ERROR - You can find them in the drivers folder of Flashtool.
I installed flashmode driver after this, there was also drivers for different xperias but i didnt see the Neo L, was there just the flashmode driver to install manuall?
Anyway, second try gives this:
25/047/2013 10:47:23 - INFO - Device connected in flash mode
25/047/2013 10:47:32 - INFO - Selected MT25i_4.1.B.0.631_SONY MOBILE by wewenk.ftf
25/047/2013 10:47:32 - INFO - Preparing files for flashing
25/047/2013 10:47:48 - INFO - Please connect your device into flashmode.
25/047/2013 10:47:48 - INFO - Opening device for R/W
25/047/2013 10:47:48 - INFO - Start Flashing
25/047/2013 10:47:48 - INFO - Processing loader
25/047/2013 10:47:48 - INFO - Checking header
25/047/2013 10:47:48 - INFO - Ending flash session
25/047/2013 10:47:48 - ERROR -
25/047/2013 10:47:48 - ERROR - Error flashing. Aborted
25/047/2013 10:47:49 - INFO - Device connected in flash mode
Any idea of what went wrong?
Click to expand...
Click to collapse
Plz check no final verification and see !
If not work then Reboot PC and install fastboot and flashmode driver in flashtool/driver ! There is no neo L driver so just install the 2 that i mentioned !
Plz note windows 8 cause some serious problem which i cant help ! If u r 7 then it is fine !
Hey Saingpor,
It seems the flash was successful. It said Flash successful but afterwards it said something like flashtool needs usb debugging and something else to be activated in order to work (which i can't check since the screen stays black).
So anyway, flash done, phone still not working. I tried changing the microsd and flashing again but with no result. Do you think that it's possible that this one time the phone fell over a month ago can be the cause of a hardware defect that affects the phone now? And if it's from origin, is it possible that the phone works perfectly for 3 months then suddenly stops working?
I don't get this. Anyway, thanks for your help.
smead221 said:
Hey Saingpor,
It seems the flash was successful. It said Flash successful but afterwards it said something like flashtool needs usb debugging and something else to be activated in order to work (which i can't check since the screen stays black).
So anyway, flash done, phone still not working. I tried changing the microsd and flashing again but with no result. Do you think that it's possible that this one time the phone fell over a month ago can be the cause of a hardware defect that affects the phone now? And if it's from origin, is it possible that the phone works perfectly for 3 months then suddenly stops working?
I don't get this. Anyway, thanks for your help.
Click to expand...
Click to collapse
Go to Sony center mate
Sent from neo L using Stock Modded
Hello Everyone,
I was running cm10-v9.3 with the X10_4.1.X_cmx10_BootManager_v20 kernel, Then I wanted to upgrade it to XPERIA X10Z-4.1.2_10.1.A.1.350 ROM which has been recently released together with the X10_4.1.X_cmx10_BootManager_v21 kernel, but I forgot to turn usb debugging off.
I cannot use SEUS to restore my phone, I forgot to make a backup (yes plain stupid) . And I can't even go into recovery or flash any other Kernel, I only managed to accidentally of course... flash the stock kernel which was in Flashtool, I can't even update it to another kernel, I tried v18, v19, v20, v21 and all gave the same error:
26/052/2013 01:52:26 - INFO - <- This level is successfully initialized
26/052/2013 01:52:26 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
26/052/2013 01:52:26 - INFO - You can drag and drop ftf files here to start flashing them
26/052/2013 01:52:31 - INFO - Device disconnected
26/052/2013 01:52:50 - INFO - Selected X10_4.1.X_cmx10_BootManager_v18.ftf
26/052/2013 01:52:50 - INFO - Preparing files for flashing
26/052/2013 01:52:50 - INFO - Please connect your device into flashmode.
26/053/2013 01:53:02 - INFO - Device connected in flash mode
26/053/2013 01:53:02 - INFO - Opening device for R/W
26/053/2013 01:53:02 - INFO - Reading device information
26/053/2013 01:53:02 - INFO - Phone ready for flashmode operations.
26/053/2013 01:53:02 - INFO - Current device : X10i - CB511J6WRH - 1257-5102_R4E - 1227-4612_3.0.1.G.0.75 - WORLD_6.0.B.0.743
26/053/2013 01:53:02 - INFO - Start Flashing
26/053/2013 01:53:02 - INFO - Processing loader
26/053/2013 01:53:02 - INFO - Checking header
26/053/2013 01:53:02 - INFO - Ending flash session
26/053/2013 01:53:02 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
Help would be appreciated. Thank you.
help
you have to flash previous kernal and then goto recover.
then full wipe and goto mount and format system.then install your rom
uchithisanka said:
you have to flash previous kernal and then goto recover.
then full wipe and goto mount and format system.then install your rom
Click to expand...
Click to collapse
That's the problem, it won't even let me flash my last kernel
piotrtekien said:
That's the problem, it won't even let me flash my last kernel
Click to expand...
Click to collapse
Thick at no final verification before flash.
Sent from my X10 using xda app-developers app
epulrevo said:
Thick at no final verification before flash.
Sent from my X10 using xda app-developers app
Click to expand...
Click to collapse
What do you mean?
edit:nevermind found it
and still same error:
26/039/2013 09:39:00 - INFO - Current device : X10i - CB511J6WRH - 1257-5102_R4E - 1227-4612_3.0.1.G.0.75 - WORLD_6.0.B.0.743
26/039/2013 09:39:00 - INFO - Start Flashing
26/039/2013 09:39:00 - INFO - Processing loader
26/039/2013 09:39:00 - INFO - Checking header
26/039/2013 09:39:00 - INFO - Ending flash session
26/039/2013 09:39:00 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
help
drag tft kernal file on to flash tool.then it showing details of kernal.then tick final verification box in right end of the flastool
uchithisanka said:
drag tft kernal file on to flash tool.then it showing details of kernal.then tick final verification box in right end of the flastool
Click to expand...
Click to collapse
I already found it, and in my last post I said it still gives me the same error after choosing my tft from my last rom from the list after ticking no final vertification at MISC.
help
if you already have this problem one solution have
try to flash x10 aro 2.3.ftf
for X10 aro 2.3.ftf fry to google it and flash
IT WORKS WOOO Thanks Bro!
uchithisanka said:
if you already have this problem one solution have
try to flash x10 aro 2.3.ftf
for X10 aro 2.3.ftf fry to google it and flash
Click to expand...
Click to collapse
I'm running XPERIA X10Z-4.1.2_10.1.A.1.350
with X10_4.1.X_cmx10_BootManager_v21 kernel
Thanks DD
{{delete|Delete reason|~~~~~}}
piotrtekien said:
IT WORKS WOOO Thanks Bro!
Click to expand...
Click to collapse
Dont forget to hit thanks
Sent from my Desire HD using xda app-developers app
Thanks Very Much
uchithisanka said:
if you already have this problem one solution have
try to flash x10 aro 2.3.ftf
for X10 aro 2.3.ftf fry to google it and flash
Click to expand...
Click to collapse
Even i got Stuck with same problem. Ur thread help to resolve issue ,,Big big thanks:good::good::good::good: