After root on my phone I have installed CWM and then install xNXT_V6 (rom). After it was succesfull installed I had to restart my phone and than boom! Is stuck at SONY logo (I have ICS) and won't go on. I don't know what to do. I tried to install new kernel with cwm, I tried to install new rom (stock and custom), I tried do everything and it still get stuck on this SONY logo. Do you know what can I do to run my phone? Please, help me.
btw. sorry for my english (i'm learning it now)
Related
Today i bought Sony Ericson Xperia Mini ST15i, i upgraded the default firmware to the latest v.62 then i used flashboot to unlock the bootloader which appeared to work according to flashboot in command prompt. I then booted into the CWM-based Recovery 5.0.2.6 and i did "wipe data/factory reset" then installed cynogenmod latest stable version then restarted and it just hangs on the cynagenmod logo, sometime it shows the unlock screen for a few seconds then shows cynagenmod logo. I can get into CWM Recovery, i've tried re-flashing my official backed up image that i made with CWM-based recovery and i've tried flashing cynagenmod. I've also tried formatting cache, data and system and then flashing cynagenmod or the backup image but still doesn't work.
The links on this site for the v.58 firmware are dead.
I need to bring my phone back to life and prefereably put the latest cynagenmod on it. The phone was factory unlocked to all networks btw, i'd like to keep that.
I have "flasher" which is able to communicate with the phone but i've got no original images to try and re-flash my phone with.
PLEASE HELP!
hajj_3 said:
Today i bought Sony Ericson Xperia Mini ST15i, i upgraded the default firmware to the latest v.62 then i used flashboot to unlock the bootloader which appeared to work according to flashboot in command prompt. I then booted into the CWM-based Recovery 5.0.2.6 and i did "wipe data/factory reset" then installed cynogenmod latest stable version then restarted and it just hangs on the cynagenmod logo, sometime it shows the unlock screen for a few seconds then shows cynagenmod logo. I can get into CWM Recovery, i've tried re-flashing my official backed up image that i made with CWM-based recovery and i've tried flashing cynagenmod. I've also tried formatting cache, data and system and then flashing cynagenmod or the backup image but still doesn't work.
The links on this site for the v.58 firmware are dead.
I need to bring my phone back to life and prefereably put the latest cynagenmod on it. The phone was factory unlocked to all networks btw, i'd like to keep that.
I have "flasher" which is able to communicate with the phone but i've got no original images to try and re-flash my phone with.
PLEASE HELP!
Click to expand...
Click to collapse
Try downloading the stable version 7.1.0.1 or something like that....doent download the one which says .2 at the end... 0.1 will definately work..
oh wow, it actually fixed it, i can't believe it !
Do you know which file i need for the google apps by any chance?
there are gapps file on xda forums. try searching it for gapps for cyanogenmod 7.1.0.1 gapps....u will definately get it....
i've already looked, the only thing i get is this: http://wiki.cyanogenmod.com/index.php?title=Latest_Version#Google_Apps
the xperia mini isn't listed so i don't know which to choose.
http://api.viglink.com/api/click?fo...txt=Download&jsonp=vglnk_jsonp_13297674014261
try this one....it should work
i am using LWW wt19i.i recently rooted my phone and then decided to try a custom rom.i downloaded real ics r6.when i run it in cwm mode and after installation it says to reboot the system.everything seems to go fine the sony logo appears then after a while it reboots gets stuck in the sony logo and there are several boot loops.how can i solve this problem???
plsss help
Thanks in advance...
flash stock firmware with flashtool, and repeat process. make sure you followed the instructions properly
I have installed CM 9.1 on my xperia sola but when i was reinstalling it for some reason it gave me status:7 error. so i tried to fix the things up but i couldn't. for dis i have formatted system data from recovery mode and tried to reinstall CM9.1 from pepper.zip but it was giving same problem so i have flashed my phone with kenrel MT27i_6.1.1.B.1.10_KERNEL.ftf. now my phone has no ROM installed i guess. when i turned on my phone it stucks on Sony logo. please help me.. how to install ROM again. i have tried to flash my phone with sotck rom but i couldnt
Flash this ftf to get back ur stock rom
http://d-h.st/wg1
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Incredeblehunk said:
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Click to expand...
Click to collapse
Use SEUS (Sony Ericsson Update Service) to re-flash your original Sony Ericsson ROM.
Download the FeraLab ROM GB v36 zip file to your phone.
Flash FeraLab Kernel v18.4 using Flashtool
Restart your phone.
Enter CWM recovery at the blue light/pink light and install FeraLab GB v36 ROM.
Reboot.
If it doesn't boot up completely and hangs during first start-up , re-flash Feralab Kernel v18.4 and then reboot again.
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
MasterofTime92 said:
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
Click to expand...
Click to collapse
As @doodownunda has mentioned, if you have access to Flashtool (Not sure why you don't have access to SEUS/PCC then) you can flash Tof37 X10S v9 ROM as the whole thing including kernel is a Flashtool flashable image. It's an all in one Kernel/ROM.
xRecovery is old school and comes with older Kernels, but CWM recovery is the main now.
Volume up button to access CWM recovery at the first flashing light on booting if needed at a later stage.
Seem you didn't flash the right kernel..
Sent from my X10i using xda app-developers app
You need to reflash 2.3.3 generic firmwares a:laugh:nd try install the rom again..:laugh:
Hi i have problem with bootloop on my L9 ll. Time ago i successfully root my phone, flash cwm and i install CyanogenMod v11. Now i have tried to flash stock room and i was successful. A problem occurred when i updated flashed stock room from menu. After download phone has reboot and fall to bootloop... Any ideas what can i do?