Hi all
I Tried many cm10.1 based roms, but i must admit that comparing to stock ICS 4.03 which i came from they area all much slower.
I tried:
Pure CM10.1
Rootbox
Slimbean
ParanoidAndroid
...
I cant find post where people are grumbling abut cyanogenmod performance..
Maybe im doing something wrong?
I always do Wipe data/factory reset, and wipe dalvik cache during every rom install.
Does anyone have such conclusions?
What do you mean with slower? Are you using stock kernel?
I only tried Pacman rom 4.2.2, and Rootbox 4.1.2 but they aren't slow with me
Sent from the Matrix
Antutu and quadrant results are slower, phone responsivness is not so good as on stock ics.
I tried booth siyah and dorimanx.
I noticed that as well.. It was moreso in the keyboard that it was really apparent, I've never had to go back and correct myself so many times because the keyboard was lagging so badly that it couldn't keep up with what I was typing. Chalked it up to bugs, reverted back to my backup and figured I'd wait until the next stable release is out and try again.
Keaybord seems laggy only because of PIE settings enabled. Try to disable them.
I full wiped and reflashed Rootbox + siyah again. It seems quite stable right now
fagalto said:
Keaybord seems laggy only because of PIE settings enabled. Try to disable them.
I full wiped and reflashed Rootbox + siyah again. It seems quite stable right now
Click to expand...
Click to collapse
Rootbox is one of the fastest roms Ive used,so I dont understand you and that other guys comments.And are you talking about speed,since your now talking about stability.
Odp: [Q] CM 10.1 based roms are slooow
Please understand: i had above problems until reflashed rom again. Reflashing and then again instaling apps is a bit waste of time for me, and i thought that someone has similar problems.
I didn't find similar post, tgat is why i asked a question.
Your post is not helpfull.
Thread to be closed/deleted
Please close or remove this thread before
Sent from my GT-I9100 using xda app-developers app
Related
Hi forumer,
I just swipe to this ROM but i found my phone shutdown itself (so far 1 times),my video recording cannot zoom and my bluetooth not working (cannot pair with my laptop and headset, my phone cannot discover them and they also cannot discover my phone,already turn on visible on my phone)
Anyone can help?i would like to post at the westcrip's thread,but my point not enough
well the ics is still in beta stage till samsung launches new official firmware ...
i have tryed a lot of ICS roms, but i'm stil on GB because i need a stable phone for daily use.
I had this problem you just need to wipe the caches partition and dalvic. Then fix permissions.
Sent from my GT-I9100
hi guys thanks for replied,
i have done a full wiped to v9.2, it solved everything for me and now my ICS running smooth
it such a great ROM!
realnormalman said:
hi guys thanks for replied,
i have done a full wiped to v9.2, it solved everything for me and now my ICS running smooth
it such a great ROM!
Click to expand...
Click to collapse
It's great to read this, inthe future with this situations follow the advice of chr15j it's good to!
i did a few ICS roms as well but went back to GB, am now on >> PhonandroidRom v1.0- Siyah Kernel -Based MIUI. Pretty stable for me...
this is completely unrelated and i'm an absolute nooblet but I just need a quick answer. I have this rom on my phone but I want to unroot and go back to stock. Am I right in thinking I can just flash a stock samsung gingerbread rom onto the device just using odin and it will unroot it and be fine? Just want to check before I steam ahead and because this is an ICS rom.
Thanks guys.
jakecarberry said:
this is completely unrelated and i'm an absolute nooblet but I just need a quick answer. I have this rom on my phone but I want to unroot and go back to stock. Am I right in thinking I can just flash a stock samsung gingerbread rom onto the device just using odin and it will unroot it and be fine? Just want to check before I steam ahead and because this is an ICS rom.
Thanks guys.
Click to expand...
Click to collapse
Yes, you may need to go back to a suitable kernel also. Using Odin should be very easy.
hello
I tried all the roms remis since 8.5
i find remix 9.4 verry good .the main problem is about chainfire kernel which has to be more developped
for ICS roms, I don't find kernels like Siyah or nymphetamine which are good with GB
now we must wait a new version of XXLPH rom
I tried yesterday Remix 9.5 but too much bugs with CWM and I went back to R 9.4
I tried others roms than Remix (omega,Criskelo,CM9,Foxhound) ,I found Foxhound 0.3 good but still more buggy than R9.4 ( cannot synchronize contacts with outlook)
br46
SGS2 with remix 9.4
Well, not only the chainfire kernel has to be more developed, but also all the custom ones...
i especially miss a perfect working siyah and neak one on ics!
hoping the devs are on it already! ^^
Try :Resurrection Remix ics v1.0, it should be out any moment now.....
Hello SGS2 users! Has anyone experienced this problem before?
I was originally running VK 5.1.2 without a problem then I flashed RR 2.5.3; didn't really like the theme then I came across PFittech ROM GTX which I thought "Wow!".
After flashing, I noticed that when the screen went off and locked, it won't wake and I need to pull battery and reboot.
As you may know that is extremely inconvenient so I flashed stock rom and went back to VK 5.1.2 but this hasn't stopped the problem
I have done all the wipes (cache, dalvik, factory/data and format system!
SwannyBhoy said:
Hello SGS2 users! Has anyone experienced this problem before?
I was originally running VK 5.1.2 without a problem then I flashed RR 2.5.3; didn't really like the theme then I came across PFittech ROM GTX which I thought "Wow!".
After flashing, I noticed that when the screen went off and locked, it won't wake and I need to pull battery and reboot.
As you may know that is extremely inconvenient so I flashed stock rom and went back to VK 5.1.2 but this hasn't stopped the problem
I have done all the wipes (cache, dalvik, factory/data and format system!
Click to expand...
Click to collapse
Ur having SOD, sleep of death... when ur phone enters deepsleep it wont get up.
this is frequently related with UV, or poor bus freq.
u should flash a kernel cleaner like this one http://forum.xda-developers.com/showthread.php?t=1363738
or any other. then u have to flash a new kernal.
Thanks mate! Will try this now
Still there
Firstly, I flashed stock firmware, then I flashed cf-root. Went into recovery and done a full wipe and flashed the script.
I done another wipe then installed VK Rom (I have never had a problem with this) and left the phone for 30 secs on screen off and it came back.
What should I do next?
Should I check all settings for CPU and GPU? Revert them to standard? I don't touch those settings as I don't have a great knowledge of changing volts and clock speeds.
Maybe you could let it on stock (unrooted) and see if it happens again...
Sent from my SGS2-I9100 powered by a SensatioN(al) 3.5 ROM
You can just wipe data, dalvic and cache and try salmanrom its the best I promise, you will never go back to another aokp rom!
Sent from my GT-I9100 using xda app-developers app
gigeaky said:
Maybe you could let it on stock (unrooted) and see if it happens again...
Sent from my SGS2-I9100 powered by a SensatioN(al) 3.5 ROM
Click to expand...
Click to collapse
Maybe u should try this, seems a good idea, just to be sure that nothing is wrong with ur phone.
I m using rootbox rom with fluxi and with a moderate uv never had any problem
Sent from my GT-I9100 using xda premium
I flashed the stock LPB firmware and used it for a full day and I never experience any SoD. Tried a few custom roms and still having the error.
Although there may seem there is nothing wrong with the phone, I have never had a problem with any roms I use. All the roms I am trying are previous downloads that have worked successfully so I doubt there is any corruption.
I won't be giving up and I will be trying everything and anything... the now I am going to try Gingerbread based roms and see if I still get the error. If anyone else has any more ideas please tell me.
SwannyBhoy said:
I flashed the stock LPB firmware and used it for a full day and I never experience any SoD. Tried a few custom roms and still having the error.
Although there may seem there is nothing wrong with the phone, I have never had a problem with any roms I use. All the roms I am trying are previous downloads that have worked successfully so I doubt there is any corruption.
I won't be giving up and I will be trying everything and anything... the now I am going to try Gingerbread based roms and see if I still get the error. If anyone else has any more ideas please tell me.
Click to expand...
Click to collapse
Can i suggest u to use rootbox ics?? Is almost flawless and i thinkbu wont have any problem
If u still getting sod u could try giving a little more voltage to ur cpu or bus...if u use fluxi with this rom is very easy to do that
Sent from my GT-I9100 using xda premium
Im a first time root user i flashed RR 2.5.3 with fluxi kernel over my stock ics its running very smoth and had no problem so far
You might need to check your cpu frequency i read her that if it was set to less than 200Mhz you might have the sleep of death issue
Can i suggest u to use rootbox ics?? Is almost flawless and i thinkbu wont have any problem
If u still getting sod u could try giving a little more voltage to ur cpu or bus...if u use fluxi with this rom is very easy to do that
Click to expand...
Click to collapse
Flashed it and crashed when i opened xxTweak after reboot wouldn't boot past the triangle. Can't get into recovery only Download mode with Jig
Im a first time root user i flashed RR 2.5.3 with fluxi kernel over my stock ics its running very smoth and had no problem so far
You might need to check your cpu frequency i read her that if it was set to less than 200Mhz you might have the sleep of death issue
Click to expand...
Click to collapse
I have tried RR 2.5.3 and had no problems in the past but now it is also giving me the SoD. Only on stock firmware I don't get it and I don't touch the cpu freq but I will take a look on the clock freqs.
SwannyBhoy said:
Flashed it and crashed when i opened xxTweak after reboot wouldn't boot past the triangle. Can't get into recovery only Download mode with Jig
I have tried RR 2.5.3 and had no problems in the past but now it is also giving me the SoD. Only on stock firmware I don't get it and I don't touch the cpu freq but I will take a look on the clock freqs.
Click to expand...
Click to collapse
Thats is pretty wierd...had u made a full wipe installation??? No one had any issue like that
Sent from my GT-I9100 using xda premium
I always do a full wipe but today I've seen something unusual.
Kernel Panic Upload Mode came up when the phone was off?
I am flashing back to GB and see if any SoD appear.
Mate, there is something wierd with ur phone...
There sure is.. I am running KI3 GB with CF Root and not received any SoD. Seems to be only on custom roms?
Good news! I fixed it!
What I did:
First of all, I had an extended battery and I swapped it for the old battery (Because of case with stand it won't fit)
Flashed stock GB (XXKI3)
Flashed CF-Root KI3
Full Wipe (Cache, Factory/Data, Dalvik, Battery stats)
Format System
Flashed Kernel Cleaner
Flashed VK 5.1.2
Flashed Siyah 3.3.2
So after doing all this, the SoD has gone. So it must be a problem with Fluxi on my device.
I may be wrong but after doing this the problem stopped and I am happy again
So thank you to you all who tried to help!
I have the same problem, except my SOD also has high battery drain even though the phone is pretty much useless. Very annoying when you are relying on the alarm clock. Did you also notice high battery drain?
I found it happened on Thebyani 4.3, not on 4.4, and now it happened on 4.5. Im hoping the kernel cleaner and the latest Siyah kernel will fix it. Any kernels you guys recommend if it still happens?
SwannyBhoy said:
Good news! I fixed it!
What I did:
First of all, I had an extended battery and I swapped it for the old battery (Because of case with stand it won't fit)
Flashed stock GB (XXKI3)
Flashed CF-Root KI3
Full Wipe (Cache, Factory/Data, Dalvik, Battery stats)
Format System
Flashed Kernel Cleaner
Flashed VK 5.1.2
Flashed Siyah 3.3.2
So after doing all this, the SoD has gone. So it must be a problem with Fluxi on my device.
I may be wrong but after doing this the problem stopped and I am happy again
So thank you to you all who tried to help!
Click to expand...
Click to collapse
well gr8 then mate!
Q: could u ever tryed giving some more voltage to cpu in fluxi?
I had a high battery drain already abd i bought a new extended battery. I am charging the device the now and it has heated but i took it off and turn it off to cool. I am going to recalibrate the battey
Try doing what I did to see if it helps.
Flash a stock unrooted firmare and see if you still get SoD
Ive been using my phone since i posted and not had one SoD.
Do you mess with your freqs? Try keeping them to basic
Sent from my GT-I9100 using xda premium
pelpa87 said:
well gr8 then mate!
Q: could u ever tryed giving some more voltage to cpu in fluxi?
Click to expand...
Click to collapse
I never ever touch the voltage. I'll stick to what i know to keep me safe
Sent from my GT-I9100 using xda premium
Hi
Im currently running on CM9 Nightlies on Samsung Galaxy S II I9100. I have seen people saying the Siyah Kernel is one of the best out there and many people across forums like it.
My question is if I flash this KERNEL what happens when I flash the next nightlies ?? would the Siyah kernel be over written with the nightly default kernel or would remain as is ?
dead soul said:
Hi
Im currently running on CM9 Nightlies on Samsung Galaxy S II I9100. I have seen people saying the Siyah Kernel is one of the best out there and many people across forums like it.
My question is if I flash this KERNEL what happens when I flash the next nightlies ?? would the Siyah kernel be over written with the nightly default kernel or would remain as is ?
Click to expand...
Click to collapse
It will be overwritten. You could try deleting boot.img from the Nightly before flashing (open the .zip and delete, don't extract it), although it might not work - I haven't looked at the script.
no it's fine to flash siyah kernel and if you flash any new room you have to format system and clean delvic cache so it's no problem
Just flash CM9 and then kernel again.
But if CM9 is secondary ROM, then the kernel will remain without changes.
apk_xiz said:
no it's fine to flash siyah kernel and if you flash any new room you have to format system and clean delvic cache so it's no problem
Click to expand...
Click to collapse
Not true. You do NOT need to format system or clean DALVIK cache before flashing a nightly over a nightly. Get your facts straight.
What's a room?
Thanx for shedding the light...!! I gues will just stick with Nightlies i find they are more matured these days and im better off with them in the long run..!!
Thanx for shedding the light...!! I gues will just stick with Nightlies i find they are more matured these days and im better off with them in the long run..!!
dead soul said:
Thanx for shedding the light...!! I gues will just stick with Nightlies i find they are more matured these days and im better off with them in the long run..!!
Click to expand...
Click to collapse
deleted
Ehh. Read my post. I wrote the same.
przemcio510 said:
Ehh. Read my post. I wrote the same.
Click to expand...
Click to collapse
sorry dude din't see the same, deleted mine:good:
I have many overheating problem with siyah + CM9. Specialy when i'm surfing or watch video.....
Siyah 3.3.3...
Sent from my GT-I9100 using xda app-developers app
Normal for dual-core.
I have a UK Samsung S3 andn ever since i updated to the jelly bean provided by samsung my phones been lagigng like when i open my messages it takes sometimes 5 seconds to open up when it didnt before and even opening things on my phone its lagging
i now have a custom rom which is android revolution HD 15.1 android version 4.1.1 kernel 3.0.31-411425
Any advice?
Thanks
Same here.. Don't get why..
very strange because it was fine before i updated to jelly bean and after that thats when it started lagging and i have the same apps on as i had before
Ditto.. In fact I deleted some!
Yup same here. It's just Jelly Bean mate. In my opinion ICS was much faster and more responsive.
Sent from my GT-I9300 using xda app-developers app
Obagleyfreer said:
Yup same here. It's just Jelly Bean mate. In my opinion ICS was much faster and more responsive.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Have you tried changing the kernel? Maybe try the Perseus Kernel? Lagging might be kernel related.. Or can try to superwipe everything, then flash the ROM again..
I have used ARHD 15 and now on ARHD 16, everything fine & smooth.. of course I did superwipe if changing to new base.
Hope this help..
Holywolf said:
Have you tried changing the kernel? Maybe try the Perseus Kernel? Lagging might be kernel related.. Or can try to superwipe everything, then flash the ROM again..
I have used ARHD 15 and now on ARHD 16, everything fine & smooth.. of course I did superwipe if changing to new base.
Hope this help..
Click to expand...
Click to collapse
It's nothing to do with kernel. It's because the messages application is getting unloaded and loading it up takes more time in JB. I think there are mods that will make it so messages application will persist in memory, so it will be opened like instantly. Have to search forums here in XDA to find it... Same for contacts and phone apps.
same
Same here. I think the problem is the Jelly Bean version made by Samsung. With 4.1.2 is the same. Dialer, contacts and messages take 2-3 seconds to load
The same thing on my dialer and messages..slower compared to ICS
wipe wipe wipe wipe wipe wipe wipe
GR0S said:
wipe wipe wipe wipe wipe wipe wipe
Click to expand...
Click to collapse
wipe before install and wipe a few times after install..still the same..
Didn't try any other JB releases, just the latest leak (ELK4 i think). Did an upgrade without even wiping directly from ICS. My phone is BY FAR more responsive and faster. Wasn't expecting it either, specially without wiping. But it did. So, not sure what you're using for a rom, but if you haven't give this one a try. Haven't done any further modding, it's all "stock", including kernel. Am using exDial though - all the stock's funcions, double the speed.
The only thing that lags is swype but only when i change languages. But since this is a leak test version running swype which is, in itself, a beta app, i'm not complaining. Everything else is just awesome, even in multiwindow.
Your solution buddy
buffblueyes said:
I have a UK Samsung S3 andn ever since i updated to the jelly bean provided by samsung my phones been lagigng like when i open my messages it takes sometimes 5 seconds to open up when it didnt before and even opening things on my phone its lagging
i now have a custom rom which is android revolution HD 15.1 android version 4.1.1 kernel 3.0.31-411425
Any advice?
Thanks
Click to expand...
Click to collapse
try reseting your settings and if you can factory reset that would be even better but reseting your setting won't damage your data but your wifi profiles will be wiped so as your Bluetooth paired devices...lets say you just have to reconfigure you're device's settings. click thanks if I helped
I am new to the rooting / rom / kernel game and done some research. I am just wanting to double check to make sure this is the correct one for me.
This is the rom I am wanting to use: [ROM][4.2.1][19/01]Slim Bean - I9100 [RC1]
My phone is rooted and I have done my rom backup and titanium backup of "All user apps + system data".
I just want to make sure this is the correct rom for my phone so I don't brick the damn thing lol.
My Model is:GT-I9100Android Version:4.0.3Baseband Version:I9100XXLPSKernel Version:[email protected] #3
yes, that rom will work.
be advised since they are starting with a new base, you may find it full of bugs and FC.
Cosmic Blue said:
yes, that rom will work.
be advised since they are starting with a new base, you may find it full of bugs and FC.
Click to expand...
Click to collapse
Would you suggest maybe going down a couple versions then?
ecordell said:
Would you suggest maybe going down a couple versions then?
Click to expand...
Click to collapse
Why not try CM9 (ICS) or CM10 (JB 4.1.2) or CM10.1 (JB 4.2.1). CM10 looks like stock Android but has some good tweaks. Alternatively if you would prefer as close as stock as possible try the rom you mentioned but get previous base version until they release final of JB base.
When you restore from Titanium its not "recommended" to restore the data as well if you have changed android versions. (although i generally ignore that advice)
the cm10 nightly from 22nd installed on my new s2 a breeze, i just installed a non stock kernel first.
I went ahead and installed their 3.1 version and had all kinds of bugs, so I went ahead and flashed the 4.2.1 version. Everything works great except my damn clock keeps restarting. I get a message "Clock has stopped" and then it resets to a random time. Then I reboot and it grabs my time from my provider again....
Anyone have any idea?
TheATHEiST said:
Why not try CM9 (ICS) or CM10 (JB 4.1.2) or CM10.1 (JB 4.2.1).
Click to expand...
Click to collapse
Do you know why stable releases disappeared from get.cm/?device=i9100 and why the last stable is 9.1 in get.cm/?device=galaxys2 ? (sorry I cannot post links)
ecordell said:
I went ahead and installed their 3.1 version and had all kinds of bugs, so I went ahead and flashed the 4.2.1 version. Everything works great except my damn clock keeps restarting. I get a message "Clock has stopped" and then it resets to a random time. Then I reboot and it grabs my time from my provider again....
Anyone have any idea?
Click to expand...
Click to collapse
Did you look for people with the same problem(s) as you in the rom-thread? If not, you can better ask there in the specific thread.
vipervault said:
Do you know why stable releases disappeared from get.cm/?device=i9100 and why the last stable is 9.1 in get.cm/?device=galaxys2 ? (sorry I cannot post links)
Click to expand...
Click to collapse
Because CM9.1 was their most recent stable version. CM10 was never really finished and the development went on to CM10.1, which is still 'under construction'
Sent from the Matrix