Hi
Im currently running on CM9 Nightlies on Samsung Galaxy S II I9100. I have seen people saying the Siyah Kernel is one of the best out there and many people across forums like it.
My question is if I flash this KERNEL what happens when I flash the next nightlies ?? would the Siyah kernel be over written with the nightly default kernel or would remain as is ?
dead soul said:
Hi
Im currently running on CM9 Nightlies on Samsung Galaxy S II I9100. I have seen people saying the Siyah Kernel is one of the best out there and many people across forums like it.
My question is if I flash this KERNEL what happens when I flash the next nightlies ?? would the Siyah kernel be over written with the nightly default kernel or would remain as is ?
Click to expand...
Click to collapse
It will be overwritten. You could try deleting boot.img from the Nightly before flashing (open the .zip and delete, don't extract it), although it might not work - I haven't looked at the script.
no it's fine to flash siyah kernel and if you flash any new room you have to format system and clean delvic cache so it's no problem
Just flash CM9 and then kernel again.
But if CM9 is secondary ROM, then the kernel will remain without changes.
apk_xiz said:
no it's fine to flash siyah kernel and if you flash any new room you have to format system and clean delvic cache so it's no problem
Click to expand...
Click to collapse
Not true. You do NOT need to format system or clean DALVIK cache before flashing a nightly over a nightly. Get your facts straight.
What's a room?
Thanx for shedding the light...!! I gues will just stick with Nightlies i find they are more matured these days and im better off with them in the long run..!!
Thanx for shedding the light...!! I gues will just stick with Nightlies i find they are more matured these days and im better off with them in the long run..!!
dead soul said:
Thanx for shedding the light...!! I gues will just stick with Nightlies i find they are more matured these days and im better off with them in the long run..!!
Click to expand...
Click to collapse
deleted
Ehh. Read my post. I wrote the same.
przemcio510 said:
Ehh. Read my post. I wrote the same.
Click to expand...
Click to collapse
sorry dude din't see the same, deleted mine:good:
I have many overheating problem with siyah + CM9. Specialy when i'm surfing or watch video.....
Siyah 3.3.3...
Sent from my GT-I9100 using xda app-developers app
Normal for dual-core.
Related
Hi
I have recently rooted my Galaxy s2 and now im looking for a different rom but there is so many to choose from and so many old threads with roms in them i have not got a clue what to choose from. Idealy im looking for a rom that will help give me longer batter life, a better wifi signal and somthing that i can add themes to.
I also have 2 questions i would like answered before i continue with a new rom.
1st Question. I currently have firmware version 2.3.5 would i need a rom compatable with this firmware?
2nd Question. My build is Gingerbread would i also need a rom that is compatable with Gingerbread
Any advice or appropriate links would be appreciated.
tmmv1 said:
Hi
I have recently rooted my Galaxy s2 and now im looking for a different rom but there is so many to choose from and so many old threads with roms in them i have not got a clue what to choose from. Idealy im looking for a rom that will help give me longer batter life, a better wifi signal and somthing that i can add themes to.
I also have 2 questions i would like answered before i continue with a new rom.
1st Question. I currently have firmware version 2.3.5 would i need a rom compatable with this firmware?
2nd Question. My build is Gingerbread would i also need a rom that is compatable with Gingerbread
Any advice would be appreciated.
Click to expand...
Click to collapse
Check if it is i9100 or i9100G. In case, it's i9100G then mate, you don't have much to choose from. If it's i9100 then you will have to try different rom and kernel combination to suit your need, everyone has different battery life for every other user. You can start off with Checkrom, it's quite great, I'm using it. Irrespective of the rom, read first page and last 5 pages of the thread so that you know what to expect, problem wise and function wise. Read, read and read carefully before doing anything.
iekansh said:
Check if it is i9100 or i9100G. In case, it's i9100G then mate, you don't have much to choose from. If it's i9100 then you will have to try different rom and kernel combination to suit your need, everyone has different battery life for every other user. You can start off with Checkrom, it's quite great, I'm using it. Irrespective of the rom, read first page and last 5 pages of the thread so that you know what to expect, problem wise and function wise. Read, read and read carefully before doing anything.
Click to expand...
Click to collapse
Thanks for the fast reply and advice mate
I just checked and im on the GT-I9100 model. The Kernal i am currently using is cwm
tmmv1 said:
Thanks for the fast reply and advice mate
I just checked and im on the GT-I9100 model. The Kernal i am currently using is cwm
Click to expand...
Click to collapse
lool i think ur getting a bit confused mate.
cwm isnt a kernel, its a program allowing u to flash zips.
i imagine ur running stock right?
then ur kernel will be stock.
i reccomend either checkrom v6 or if ur feeling daring ICS roms r pretty gd aswell
CWM is not a kernel its a function inside the kernel mate
you need to decide wether you want ICS or GB
for ICS i'd reccomend XXLPH stock ROM its the best rom i've tried for 4.0.3
and for GB you can go for Checkrom V6 i've heard its pretty awesome ( i tried v4 myself but didnt like the battery life)
adamski123 said:
lool i think ur getting a bit confused mate.
cwm isnt a kernel, its a program allowing u to flash zips.
i imagine ur running stock right?
then ur kernel will be stock.
i reccomend either checkrom v6 or if ur feeling daring ICS roms r pretty gd aswell
Click to expand...
Click to collapse
Oh Rite lol I guess i should be sent to the youtube clip for xda again.
So let me get this rite
When i start my phone and choose the up+home+ start button i see a menu called clockwork recovery v4.0.0.2 this is a kernal?
tmmv1 said:
Oh Rite lol I guess i should be sent to the youtube clip for xda again.
So let me get this rite
When i start my phone and choose the up+home+ start button i see a menu called clockwork recovery v4.0.0.2 this is a kernal?
Click to expand...
Click to collapse
no, the kernel is wen u go into about phone and go to kernel version. It will then display it underneath.
Wat rom r u running?
did u buy the phone from the shop or somewhere else?
>1st Question. I currently have firmware version 2.3.5 would i need a rom compatable with this firmware?
>2nd Question. My build is Gingerbread would i also need a rom that is compatable with Gingerbread
I've tested the ICS stock rom and a few others but for now settled for the "Resurrection Remix ics v9.3 black edition XXLPH 4.0.3 FULL-Wipe" and I'm very satisfied.
Battery wise it a lot better and the interface seems snappier and not as bloated as the original rom.
RorixRebel said:
CWM is not a kernel its a function inside the kernel mate
you need to decide wether you want ICS or GB
for ICS i'd reccomend XXLPH stock ROM its the best rom i've tried for 4.0.3
and for GB you can go for Checkrom V6 i've heard its pretty awesome ( i tried v4 myself but didnt like the battery life)
Click to expand...
Click to collapse
Chears mate.
From my point of view reading all the threads and topics regarding kernals and roms is a bit mind messing because there is so many too choose from
ok do the following, grab your phone - > dialer - > *#1234#
this will display PDA,CSC and Phone, this will provide the rom you are running for further reference
then into settings->about phone->kernel version ( must be something since you have root and CWM, im guessing chainfire kernel)
with that information we can provide you a better help
See my sig. Best Rom by far that I have tried.
http://forum.xda-developers.com/showthread.php?t=1312240
adamski123 said:
no, the kernel is wen u go into about phone and go to kernel version. It will then display it underneath.
Wat rom r u running?
did u buy the phone from the shop or somewhere else?
Click to expand...
Click to collapse
This is the thread i followed
http://forum.xda-developers.com/showthread.php?t=1103399
This is what i installed
http://download.chainfire.eu/39/CF-Root/SGS2/CF-Root-SGS2_XX_OXA_KI3-v4.1-CWM4.zip
I bought the phone from a family member
tmmv1 said:
Hi
I have recently rooted my Galaxy s2 and now im looking for a different rom but there is so many to choose from and so many old threads with roms in them i have not got a clue what to choose from. Idealy im looking for a rom that will help give me longer batter life, a better wifi signal and somthing that i can add themes to.
I also have 2 questions i would like answered before i continue with a new rom.
1st Question. I currently have firmware version 2.3.5 would i need a rom compatable with this firmware?
2nd Question. My build is Gingerbread would i also need a rom that is compatable with Gingerbread
Any advice or appropriate links would be appreciated.
Click to expand...
Click to collapse
I think if you are confused with the diffrences between kernel and cmw, i am pretty sure you are confussed about a lot of other things. So i think some reading is in order -
http://forum.xda-developers.com/showthread.php?t=1125282
This is a very good guide to read and their are other links within that thread to look through too. We all start not knowing what to do but lots of reading always helps, i hope it all goes well for you.
P.S. I am using ICS CM9 Codeworkx and it's a great rom, very stable even for a new user of custom roms.
as i thought you have a CF-Root so you are rooted and with CWM, on your app drawer you should have the CWM icon.
So you are ready to flash mate
you have to pick a ROM
for ICS i recommend
http://forum.xda-developers.com/showthread.php?t=1292825
for GB try
http://forum.xda-developers.com/showthread.php?t=1312240
in both scenarios you have to download the files and place them inside your phone via usb on a folder, then go into CWM mode and pick the option "install zip from sdcard" navigate inside your folders and pick the file you downloaded.....couple mins later you flashed succesfully your phone
cheers
RorixRebel said:
as i thought you have a CF-Root so you are rooted and with CWM, on your app drawer you should have the CWM icon.
So you are ready to flash mate
you have to pick a ROM
for ICS i recommend
http://forum.xda-developers.com/showthread.php?t=1292825
for GB try
http://forum.xda-developers.com/showthread.php?t=1312240
in both scenarios you have to download the files and place them inside your phone via usb on a folder, they go into CWM mode and pick the option "install zip from sdcard" navigate inside your folders and pick the file you downloaded.....couple mins later you flashed succesfully your phone
cheers
Click to expand...
Click to collapse
Yeh
Wat he said^^
But makev uve read everything and know wat to do before flashing.
Good luck
Sent from my GT-I9100 using xda premium
RorixRebel said:
as i thought you have a CF-Root so you are rooted and with CWM, on your app drawer you should have the CWM icon.
So you are ready to flash mate
you have to pick a ROM
for ICS i recommend
http://forum.xda-developers.com/showthread.php?t=1292825
for GB try
http://forum.xda-developers.com/showthread.php?t=1312240
in both scenarios you have to download the files and place them inside your phone via usb on a folder, they go into CWM mode and pick the option "install zip from sdcard" navigate inside your folders and pick the file you downloaded.....couple mins later you flashed succesfully your phone
cheers
Click to expand...
Click to collapse
Thanks mate. I did get confussed with my replies but i had a feeling i did install a kernal so thanks for verifying it for me
What is the difference between the Ics and GB please?
The Kernal im using can be kept while changing roms yeah? or do i have to change kernals for certain roms ?
tmmv1 said:
Thanks mate. I did get confussed with my replies but i had a feeling i did install a kernal so thanks for verifying it for me
What is the difference between the Ics and GB please?
The Kernal im using can be kept while changing roms yeah? or do i have to change kernals for certain roms ?
Click to expand...
Click to collapse
Thank you everyone for your support and patience
the difference...amm you will need to youtube or google that as they are tons of different things, ICS is faster, smoother and damn good looking for me at least. Ill never go back to GB once i tasted the ICS
the kernels used for both ICS and GB are different each rom has its own kernel where the dev tested it works correctly, you could change them but if you flash a kernel you shouldn't or if its not compatible with the rom you might regret that
stick with the kernels included in the roms unless you are 100% sure they can work on the rom you pick
oh and one last thing before flashing stuff wipe your phone, its done inside CWM there's an option which says "wipe data/factory reset" and also wipe your dalvik cache inside CWM as well on "advanced->wipe dalvik cache"
hope it helped mate
RorixRebel said:
the difference...amm you will need to youtube or google that as they are tons of different things, ICS is faster, smoother and damn good looking for me at least. Ill never go back to GB once i tasted the ICS
the kernels used for both ICS and GB are different each rom has its own kernel where the dev tested it works correctly, you could change them but if you flash a kernel you shouldn't or if its not compatible with the rom you might regret that
stick with the kernels included in the roms unless you are 100% sure they can work on the rom you pick
oh and one last thing before flashing stuff wipe your phone, its done inside CWM there's an option which says "wipe data/factory reset" and also wipe your dalvik cache inside CWM as well on "advanced->wipe dalvik cache"
hope it helped mate
Click to expand...
Click to collapse
So the roms have there own kernels in? just to verify please?
im a little outdated on kernels but last time i checked there were kernels for GB and kernels for ICS. not sure if they work on both operative systems now
still, stick with the kerneles included in the roms, they are tested and included in the roms cause they work, by your question i feel you are concerned about losing CWM
worry not mate, CWM is present in all of the rooted kernels
cheers
I was on supernexus I777 build 4, before upgrading to build 5 I wiped everything and also did format system kernelcleaner script was also used, then first installed siyah 4.3.3 for I777 then installed build 5 and then gapps and then reboot phone boots up siyah screen loads and then phone goes dark waited for 1/2 hour nothing happens reinstalled 3 times same problem also did reset after install same problem what should I do now.
Sent from my SGH-I777 using xda app-developers app
lingarajug said:
I was on supernexus I777 build 4, before upgrading to build 5 I wiped everything and also did format system kernelcleaner script was also used, then first installed siyah 4.3.3 for I777 then installed build 5 and then gapps and then reboot phone boots up siyah screen loads and then phone goes dark waited for 1/2 hour nothing happens reinstalled 3 times same problem also did reset after install same problem what should I do now.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Are you using the right siyah?
Bleh
Sounds like the ROM doesn't have the Mali updates. It will work without Siyah, or you can use a non-mali version of Siyah.
korockinout13 said:
Sounds like the ROM doesn't have the Mali updates. It will work without Siyah, or you can use a non-mali version of Siyah.
Click to expand...
Click to collapse
It does have mali
Doesn't matter what version of kernel you use from my understanding... (as long as it's for this phone)
Flashing the ROM, via CWM, will overwrite whatever kernel is installed with its own kernel.
Something is wrong, true. But I don't believe it to be Siyah or SuperNexus.
Have you tried re-downloading SuperNexus and flashing the new dl? You may have had a bad dl.
Oh, and if I'm wrong about anything, please correct me. Always willing to learn!
Clay
Team Pirate
Sent from my PINK GSwagger2
And the logcat says?
Sent from Arkham
0. Complete wipe of course.
1.Flash supernexus build 5 + gapps.
2.Reboot, Let it boot up once atleast.
3.Boot into recovery
4. wipe, dalvik cache
5. flash siyah.
6. Reboot
thank you everyone, I'm tired to see my phone go blank again, I read some posts saying siyah gives better battery life than the kernel included in the ROM, which was the reason I wanted to try it, I have tried siyah with older supernexus ROM and currently using built in kernel and notice no difference, I guess I should try it before asking it here, thanks again everyone for ur support.
Sent from my SGH-I777 using xda app-developers app
4.3.3 nomswap??
I have an at&t gs2 i777 and I'm currently on SuperNexus build 2 with Siyah-v4.1.5-nomswap. I want to upgrade to supernexus build5 with siyah 4.3.3. The only thing I'm confused with is that I don't see anymore any download for nomswap for JB.
Download v4.3.3 - CM10/AOKP MALI - CWM Flashable
WITH mic swap
Download v4.3.3 - ICS
WITH mic swap
WITHOUT mic swap
Which one should I install??
Thnks!!
t7reyeslua said:
I have an at&t gs2 i777 and I'm currently on SuperNexus build 2 with Siyah-v4.1.5-nomswap. I want to upgrade to supernexus build5 with siyah 4.3.3. The only thing I'm confused with is that I don't see anymore any download for nomswap for JB.
Download v4.3.3 - CM10/AOKP MALI - CWM Flashable
WITH mic swap
Download v4.3.3 - ICS
WITH mic swap
WITHOUT mic swap
Which one should I install??
Thnks!!
Click to expand...
Click to collapse
You need mswap on all JB roms...
Thanks
122ninjas said:
You need mswap on all JB roms...
Click to expand...
Click to collapse
Wow! Thanks a lot for the quick response! I'll take your word ...I had doubts because when I installed supernexus build2 (JB) I got confused first and installed siyah with mic swap and couldn't hear anything during calls...so I changed it to nomswap and everything ran smoothly...so now that I wanted to install siyah 4.3.3 i was surprised there was no nomswap.
This is my first Android and I love the Supernexus/Siyah Combo!!
t7reyeslua said:
Wow! Thanks a lot for the quick response! I'll take your word ...I had doubts because when I installed supernexus build2 (JB) I got confused first and installed siyah with mic swap and couldn't hear anything during calls...so I changed it to nomswap and everything ran smoothly...so now that I wanted to install siyah 4.3.3 i was surprised there was no nomswap.
This is my first Android and I love the Supernexus/Siyah Combo!!
Click to expand...
Click to collapse
Mswap and noMswap effects people hearing you not you hearing them
Hi Guys
I just change my kernel from siyah to dorimanx kernel, and then I installed cyanogenmod 10.1 in the 2nd rom.
I made a mistake to install gapps for cm 10.1 in my stock rom (1st rom). After that whenever I want to boot to my 1st rom it just stucks.
I've tried to wipe cache and dalvik cache in my 1st rom but it still stucks at the Dorimanx start up.
My Phone is Samsung Galaxy SII GT-I9100
Kernel : Dorimanx v7.47
2nd Rom : cm-10.1-20130221-NIGHTLY-i9100
Please help me solve this problem. Any help will be appreciated. Thanks
Flash your first rom again.
Rule number 1:
If you dont know what to do, wipe everything and start from scratch.
Lennyz1988 said:
Flash your first rom again.
Rule number 1:
If you dont know what to do, wipe everything and start from scratch.
Click to expand...
Click to collapse
Thanks for your reply.
I've flashed my kernel and it still didn't solve the problem.
maybe later I will wipe everything but right now I still want to try to solve this without formatting my 1st rom.
dreawf said:
Thanks for your reply.
I've flashed my kernel and it still didn't solve the problem.
maybe later I will wipe everything but right now I still want to try to solve this without formatting my 1st rom.
Click to expand...
Click to collapse
Wipe everything, especially /system and then reflash your ROM and your favorite kernel.
Go back to siyah.
Sent from the little guy
gastonw said:
Go back to siyah.
Sent from the little guy
Click to expand...
Click to collapse
I don't want to go back to siyah because right now siyah don't support 4.2.. thx though
Hum....siyah v6 does.
Sent from the little guy
big_bum said:
Wipe everything, especially /system and then reflash your ROM and your favorite kernel.
Click to expand...
Click to collapse
In the end I flash my rom. I don't think there is another way to restore my stock rom..
Thanks for your answer
gastonw said:
Hum....siyah v6 does.
Sent from the little guy
Click to expand...
Click to collapse
yeah but it still doesn't support dual boot.. So I will stick with dorimanx till it can support dual boot..
I have flashed paranoidandroid 3.15 on my galaxy s3 a couple weeks ago, aside the occasional screen that win't turn on I haven't had any problem, but I set my mind on flashing a new kernel in order to be able to change thez governor. I tried to flash air kernel on, I did exactly what I was told: Boot into recovery, clear cache/delvik, installed kernel from sd card, and rebooted. But after the phone being rebooted, I still had the stock kernel.
My question is, why did this happen, and how do I fix it?
All help is appreciated
what recovery? link to the kernel?
Glebun said:
what recovery? link to the kernel?
Click to expand...
Click to collapse
I'm running TWRP ( Team Win Recovery Project)
http://forum.xda-developers.com/showthread.php?t=1469842 link to the kernel, although if you know any kernels that work better/ more appropriate for ParanoidAndroid, I am more than open to suggestions
vonniel said:
I'm running TWRP ( Team Win Recovery Project)
http://forum.xda-developers.com/showthread.php?t=1469842 link to the kernel, although if you know any kernels that work better/ more appropriate for ParanoidAndroid, I am more than open to suggestions
Click to expand...
Click to collapse
Kernel is for nexus s not galaxy s3
Sent from my GT-I9300 using xda premium
wow, you're lucky the updater-script saved your phone. Flashing wrong firmware will kill it
Glenbun. Only mismatched, corrupted, or missing boot loaders can kill a phone.
yeah-yeah, but we should scare the noobs away from flashing the wrong firmware that potentially includes a bootloader
Glebun said:
yeah-yeah, but we should scare the noobs away from flashing the wrong firmware that potentially includes a bootloader
Click to expand...
Click to collapse
Glebun u have a point, even other incompatible components of recovery zip packages can brick the phone.
Sent from my Supercharged V12 Samsung Galaxy S3 using Tapatalk
Glebun said:
wow, you're lucky the updater-script saved your phone. Flashing wrong firmware will kill it
Click to expand...
Click to collapse
Wow, I feel so dumb ^^' I'll be more careful next time around.
What kernel would you recommend for me?
I recommed stock mb5 or speedmod k2-12 kernels for you
Bahadirafro said:
I recommed stock mb5 or speedmod k2-12 kernels for you
Click to expand...
Click to collapse
Well, I don't really know either of them, I don't mind stock, but I want to change things, sometimes it just isn't up for the task, or uses up battery when I would rather it didn't, without even knowing what they do, and looking around, I found the perseus kernel, I would like some opinions on the kernel, I would be very grateful if you told me if it fits me, if it's compatible with ParanoidAndroid, and finally if you have a better suggestion for a kernel.
http://forum.xda-developers.com/showthread.php?t=1691401
read the first post of the thread to find out if it's compatible with your ROM.
and try it to see if it suits you
If I'm running TWRP can I still download kernels that say they are meant for CWM?
yes
Hi there,
Can you please help me, I am a NOOB and I been looking and trying to fix my phone for a week and I cant work it out, therefore I come here seeking your help, I would very much value ideas or solutions you could provide.
I will be as brief as possible.
When I try to flash a new Rom, my phone gets stuck on the boot screen, there are only two roms that load, one freezes, the others roms wont boot.
All started like this:
I originally had RR JB V3.1.3 AOKP 4.2.1 I9100
Then changed to
AllianceROM_I9100_XWLSS_V8, look good but thought of trying the aokp i9100 jb-mr1 milestone-1, when trying to swap I made the mistake of doing a factory reset to find out that I could not access the roms on my sdcard.
so I then installed (I9100_CODE_I9100XXLP2_CL57619_REV02_user_low_ship.tar) it all worked as it went to stock. I rooted the phone again, tried installing the AllianceRom, but it didnt want to load, tried the Aokp again it did work, but then once the screen turns off it wont respond...
tried super nexus, did not want to work. tried updating CMW, it doesnt want to... Tried Jellybam, did not load...
So I tried and reloaded RR JB V 3.1.3 as I already have and it works, it is the only rom that works successfully, But if I try to go on to CMW, it doesnt work anymore, and it seems that once I try to use CMW it makes the rom unstable... So it seems that I can only use one Rom at the moment. Clearly I must of done something wrong at some point but I dont know what. I dont even know what to search for to fix it.
I tried different tools to see if they would help and no luck, such as, GS2ROMNuke, Romreset and Romwipe, Darkside cache and superwipe.
I hope someone can help me out in working out what I did wrong or what is happening.
Thank you so much for your time and help.
Bump, Any help would be very much appreciated.
Thnaks
Bumping inside 24 hrs is not permitted.
MistahBungle said:
Bumping inside 24 hrs is not permitted.
Click to expand...
Click to collapse
Thanks for letting me know... Will keep that in mind next time.
Try kernel nuke then flash another kernel say siyah as its got cwm. Should be good then mate. Then install alliance rom. Also when you installed and booted for first time on these roms did you try wipe cache and dalv cache fix Permission ??
sent from my I9100 Alliance v8
andrewwright said:
Try kernel nuke then flash another kernel say siyah as its got cwm. Should be good then mate. Then install alliance rom. Also when you installed and booted for first time on these roms did you try wipe cache and dalv cache fix Permission ??
sent from my I9100 Alliance v8
Click to expand...
Click to collapse
Thanks for the tip... I did try however I dont have access to cwm anymore once I install RR.
The only way I can get CWM to work again, is installing speedmod-kernel-s2-k2-21- through Odin but then the rom doesnt work anymore.
I tried the kernel nuke, I have tried installing siyah kernel with RR, but no luck it doesnt go into cmw. keep getting a message Kernel Panic...
anymore suggestions?
Could I have done something on the mounts? I dont know, but I cant think of what is going on.
Could it be that my phone has emmc brick?
I came across two apps
Got Brickbug?
Verdict
Danger! This eMMC chip is known to have the brick bug!
and
eMMC check
Brick Bug?
Yes. Insane chip....
Could someone please give me an indication what this means for me? Thanks
Yes, it's sticked in the general forum.
Sent from the little guy
gastonw said:
Yes, it's sticked in the general forum.
Sent from the little guy
Click to expand...
Click to collapse
Thanks mate!!!
One final question, why is it that the RR Rom is the only one to work rather well? (CMW does not work once the rom is intalled)
Thanks heaps!
Where did you hear that?
Sent from the little guy
gastonw said:
Where did you hear that?
Sent from the little guy
Click to expand...
Click to collapse
RR is runing rather well,I have tried it... I have currently stock installed and it is working just fine....
Any ideas? Thanks
swifteagle said:
RR is runing rather well,I have tried it... I have currently stock installed and it is working just fine....
Any ideas? Thanks
Click to expand...
Click to collapse
"Serenity now, insanity later"
gastonw said:
"Serenity now, insanity later"
Click to expand...
Click to collapse
hahahaha, so is my s2's chip insane?
Thanks
swifteagle said:
hahahaha, so is my s2's chip insane?
Thanks
Click to expand...
Click to collapse
Yes, but you don't need to worry (as long as you're not on 4.0.4), and that's that.
gastonw said:
Yes, but you don't need to worry (as long as you're not on 4.0.4), and that's that.
Click to expand...
Click to collapse
Thanks...Fantastic!!!