Hi everyone, I'm facing a serious problem now.
The motherboard of my device has spoilt. But when I send in to warranty they rejected as I've root my s3. It stuck at the boot screen when I switched it on. I've tried to flash the stock firmware but no avail. I know triangle away can fix the flash count. But I couldn't even switch on my device. Is there any alternative to reset the flash count and unroot my device using pc? Probably Odin or other software. Or reset it using any .zip file in CWM recovery mode? I seriously need your help. Thank you very much!
clonza said:
Hi everyone, I'm facing a serious problem now.
The motherboard of my device has spoilt. But when I send in to warranty they rejected as I've root my s3. It stuck at the boot screen when I switched it on. I've tried to flash the stock firmware but no avail. I know triangle away can fix the flash count. But I couldn't even switch on my device. Is there any alternative to reset the flash count and unroot my device using pc? Probably Odin or other software. Or reset it using any .zip file in CWM recovery mode? I seriously need your help. Thank you very much!
Click to expand...
Click to collapse
Can you enter download or recovery?
Sent from my GT-I9300 using xda app-developers app
hey man, I have the same problem, I can enter in download mode and in recovery, but my phone don't boot, are thare a way to reset the counter with ODIN or recovery ? PLEASE HELP-ME !
bixano said:
hey man, I have the same problem, I can enter in download mode and in recovery, but my phone don't boot, are thare a way to reset the counter with ODIN or recovery ? PLEASE HELP-ME !
Click to expand...
Click to collapse
have you done a factory reset and reflash?
bixano said:
hey man, I have the same problem, I can enter in download mode and in recovery, but my phone don't boot, are thare a way to reset the counter with ODIN or recovery ? PLEASE HELP-ME !
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2219755
That should help you get back to stock.
AndroidPlant
An everyday user.
Glebun said:
have you done a factory reset and reflash?
Click to expand...
Click to collapse
yes i tried it !, my problem is that i can't send my brick phone to the warranty without reset the flash counter to 0,
is there a way to do this in CWM or Odin ?
bixano said:
yes i tried it !, my problem is that i can't send my brick phone to the warranty without reset the flash counter to 0,
is there a way to do this in CWM or Odin ?
Click to expand...
Click to collapse
If you can boot into Download or Recovery then your phone is only soft brick, you have several options to recover it - the most expensive would be to send it to service.
Search, read and learn in general forum stickies.
clonza said:
Hi everyone, I'm facing a serious problem now.
The motherboard of my device has spoilt. But when I send in to warranty they rejected as I've root my s3. It stuck at the boot screen when I switched it on. I've tried to flash the stock firmware but no avail. I know triangle away can fix the flash count. But I couldn't even switch on my device. Is there any alternative to reset the flash count and unroot my device using pc? Probably Odin or other software. Or reset it using any .zip file in CWM recovery mode? I seriously need your help. Thank you very much!
Click to expand...
Click to collapse
Same problem here, but i can enter the download mode only. Is there anyway to reset the flash count so i can send for warranty?
keptz said:
Same problem here, but i can enter the download mode only. Is there anyway to reset the flash count so i can send for warranty?
Click to expand...
Click to collapse
no
Related
i got the Gt-i9300 disappeared from my phone when i enter recovery mode,,,
my device is bricked and don't know how to fix? pls help:crying::crying::crying::crying:
skycasaway said:
i got the Gt-i9300 disappeared from my phone when i enter recovery mode,,,
my device is bricked and don't know how to fix? pls help:crying::crying::crying::crying:
Click to expand...
Click to collapse
More info dude. What were you doing prior to that? Why were u going to recovery?
Sent from my CLEAN Note ll
skycasaway said:
i got the Gt-i9300 disappeared from my phone when i enter recovery mode,,,
my device is bricked and don't know how to fix? pls help:crying::crying::crying::crying:
Click to expand...
Click to collapse
what do you mean GT-i9300 disappeared from your phone!? be a bit more clear.
brandonarev said:
More info dude. What were you doing prior to that? Why were u going to recovery?
Sent from my CLEAN Note ll
Click to expand...
Click to collapse
Thanx mate, look my problem is that my device has bricked and stuck on boot start screen ,,, and i tried to wipe data by entering recovery mode ,, but unfortunately my device cannot enter it. so i downloaded my custom firmware which is ''I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar''. and by using ODIN it failed. and say there no pit file or sometime nmd error... but I realized that when i enter restore mode on the top of the screen the Gt-i9300 has disappeared which is in normal device when entering restore mode must be present, you know what i mean
i am looking forward to your help :crying:
help
brandonarev said:
More info dude. What were you doing prior to that? Why were u going to recovery?
Sent from my CLEAN Note ll
Click to expand...
Click to collapse
Thanx mate, look my problem is that my device has bricked and stuck on boot start screen ,,, and i tried to wipe data by entering recovery mode ,, but unfortunately my device cannot enter it. so i downloaded my custom firmware which is ''I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar''. and by using ODIN it failed. and say there no pit file or sometime nmd error... but I realized that when i enter restore mode on the top of the screen the Gt-i9300 has disappeared which is in normal device when entering restore mode must be present, you know what i mean
i am looking forward to your help
Flash stock rom through Odin and report error as your report is to hard to follow .
Stock rom not custom firmware via Odin and download mode .
jje
JJEgan said:
Flash stock rom through Odin and report error as your report is to hard to follow .
Stock rom not custom firmware via Odin and download mode .
jje
Click to expand...
Click to collapse
Is phone got hit by sds. He said odin flash fail because couldnt file pit partition memomy block of pit got corrup.
Take your phone to service center mate u need new board
Sent from my GT-I9300 using xda premium
help pls
Ver3go said:
Is phone got hit by sds. He said odin flash fail because couldnt file pit partition memomy block of pit got corrup.
Take your phone to service center mate u need new board
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
thanx 4 this help,, but i jst got another last question?? can I restore my phone using of samsung kies coz i can write down my specific phone serial number, model as well there, by hitting tools/ emergency firmware recovery?? does this method work?
you cannot do anything, the motherboard is dead. send it in
flashed CM10.1 yesterday,
last thing to get rid of the yellow triangle and it won't boot up anymore,
is there any way to recover it?
m
[Q] SGS2 bricked by installing Triangleaway 3.10
moping won't help said:
flashed CM10.1 yesterday,
last thing to get rid of the yellow triangle and it won't boot up anymore,
is there any way to recover it?
m
Click to expand...
Click to collapse
Go to recovery and flash your rom again with full wipe or go to download mode to flash the stock rom with ODIN.
Good luck
Sent from my iPhone using Tapatalk
Jeetu said:
Go to recovery and flash your rom again with full wipe or go to download mode to flash the stock rom with ODIN.
Good luck
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
thanks! tried it,
i can't get it into recovery mode,
it won't go past the SGS2 logo,
it will however go into download mode, if this can be of any help?!
Thanks!
apologies!
have not read the post properly,
will try through ODIN,
cheers!
Change the title of your thread. Your phone was never bricked (bricked phones don't boot/download mode & recovery aren't accessible)/TA did nothing of the sort to your phone.
moping won't help said:
thanks! tried it,
i can't get it into recovery mode,
it won't go past the SGS2 logo,
it will however go into download mode, if this can be of any help?!
Thanks!
Click to expand...
Click to collapse
If you stuck at s2 logo then go to recovery mode and do Wipe Data /Factory reset and Wipe Cache . Reboot . It will work
Good luck
Sent from my iPhone using Tapatalk
Hi guys, I hope you can help....my phone has the latest cyanogenmod ROM installed and all has been running well...until today.I had the phone on charge and when I tried to boot it was getting stuck on the 'samsung galaxy s iii GT-I9300' screen..I have rebooted to recovery cleared cache, delvik cache and installed the ROM again, rebooted and still not working, so I repeated the same steps but also done factory reset, still the same. I have tried to connect the phone to pc but it is failing to load MTP usb drivers ....which I think is a unrelated issue.
I'm sure I should be able to get it going via recovery, have been trying all day...is there something I should be doing that I haven't tried already?
Hope somebody can help as I'm pulling my hair out!
Thanks in advance.
Donna
flash official firmware from sammobile.com via odin
Is product name blank in download mode, if yes then you have SDS and need a new motherboard. If no then flash stock rom using odin after full wipe and format of system & data, factory reset in recovery after flash and see if it boots.
Sent from my GT-I9300 using Tapatalk
If you can go into recovery mode, it's not SDS, if you have backup just restore it, or go into download mode and flash stock Samsung firmware.
Make sure that you have latest Samsung drivers on your computer installed.Good luck.
Hi guys...
Thanks for the replies, I'm in the process of downloading the latest stock ROM, I didn't realise it was such a big file 800+MB!
Donna
still no luck
Hi guys,
I tried to reflash stock via odin and kies but still the phone is stuck on the samsung logo...so I tried reflashing CM 10.2 but its still the same....I really dont know what else to try...any help would be appreciated.
Donna
Simonna said:
If you can go into recovery mode, it's not SDS, if you have backup just restore it, or go into download mode and flash stock Samsung firmware.
Make sure that you have latest Samsung drivers on your computer installed.Good luck.
Click to expand...
Click to collapse
It is possible to have sds even if u can boot into recovery.
Sent from my GT-I9300 using xda app-developers app
MrsDLA said:
Hi guys,
I tried to reflash stock via odin and kies but still the phone is stuck on the samsung logo...so I tried reflashing CM 10.2 but its still the same....I really dont know what else to try...any help would be appreciated.
Donna
Click to expand...
Click to collapse
After installing stock with odin did you do a factory reset straight away?
JellyYogurt said:
It is possible to have sds even if u can boot into recovery.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Well,as much as I have read about SDS, you can't go into recovery mode,you can go only into download mode and there is blank product name.So maybe to OP it's a different situation, and to OP I would suggest to check if product name on download mode isn't blank.
JellyYogurt said:
It is possible to have sds even if u can boot into recovery.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Unfortunately not
1) Complete eMMC failure. This usually happens over night whilst on charge* - The LED may be lit but the phone will not wake. Subsequent removal of the battery will turn off the LED. You will never get the LED back on. The phone will never turn on again. It needs to go to a service centre and have the motherboard replaced
* Being on Charge is NOT the cause. This is a writing to memory issue and it is more likely to happen when teh device is awake rather than in deep sleep. When the S3 is on charge, it holds a wake lock (so remains awake) throughout the entire charging period, meaning SDS is more likely to occur when on charge This does not mean you should avoid charging your phone. If it's going to happen, it's going to happen
2) Half SDS as it has not-so-affectionately become known. This tends to be more of a boot loop of the Samsung boot splash. the eMMC is partially wiped out. You cannot boot into android or recovery . It fails at the boot screen, but the screen does turn on none-the-less. The only; thing you can do is top boot into Download mode.
Hi guys
Just to clarify, the product name on download mode isn't blank....and yes I tried the reset after loading from odin.
Donna
In recovery .
Format system data cache and sd card .
Boot to download mode flash stock rom via Odin .
JJEgan said:
In recovery .
Format system data cache and sd card .
Boot to download mode flash stock rom via Odin .
Click to expand...
Click to collapse
just tried that...still no luck.
Donna
Reflash and turn it on and wait for some time, dont pull out battery, just wait, nothing to lose
Sent from my GT-I9300 using XDA Premium 4 mobile app
mrdreamers said:
im stuck on the s2 boot logo i think its bricked i tried taking out battery and clearing cache and dav but still frozen on s2 boot logo do i need to odin stock to fix? if so which stock do i use? can someone provide a link to the stock i need and root files?
i already have odin and cwm recovery is already on my phone.
Click to expand...
Click to collapse
mrdreamers said:
ty for that but he say to download this, "I777UCKH7-REV02-home-low-CL503881.tar.md5.7z" which i am right now but then he says to download a kernel to flash second but he does not say exactly which one it is unless im not understanding him can you tell me which one he is talking about? and is that all i need to go back to stock and then root?
Click to expand...
Click to collapse
Are you able to get the phone into recovery mode? If so, a factory reset should solve the boot issue.
If not, then it is worth trying to flash the stock firmware via ODIN.
Are you able to enter recovery or download mode?
Help Plss. After flashing my rom Cm 11 4.4.2 Kitkat by Archi, im using after a mos, But now my phone suddenly restarting, and now its hanging only in samsung galaxy SII GT-i9300 logo only. Cant also enter CWM recovery mode. But i can enter Download Mode.. can anybody help me plss Thanks in advance.
mac123456789 said:
Help Plss. After flashing my rom Cm 11 4.4.2 Kitkat by Archi, im using after a mos, But now my phone suddenly restarting, and now its hanging only in samsung galaxy SII GT-i9300 logo only. Cant also enter CWM recovery mode. But i can enter Download Mode.. can anybody help me plss Thanks in advance.
Click to expand...
Click to collapse
Flash back to stock with Odin and don't forget to factory reset after flashing or you could even try flashing PhilZ recovery with odin boot into PhilZ after flashing and factory reset see if that works if not flash stock and start again.
tallman43 said:
Flash back to stock with Odin and don't forget to factory reset after flashing or you could even try flashing PhilZ recovery with odin boot into PhilZ after flashing and factory reset see if that works if not flash stock and start again.
Click to expand...
Click to collapse
Hi Tallman, Thanks for the help, Can you provide me the link, I have my EFS bakcup, I dont know wich stock rom should i get i forgot my baseband number, or the procedure of PhilZ. Thanks alot..
mac091889 said:
Hi Tallman, Thanks for the help, Can you provide me the link, I have my EFS bakcup, I dont know wich stock rom should i get i forgot my baseband number, or the procedure of PhilZ. Thanks alot..
Click to expand...
Click to collapse
Direct link https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/ you need the.tar.md5 version for Odin. PhilZ thread http://forum.xda-developers.com/galaxy-s3/orig-development/i93xx-philz-touch-t2002953 you can also backup efs with PhilZ recovery too.
tallman43 said:
Direct link https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/ you need the.tar.md5 version for Odin. PhilZ thread http://forum.xda-developers.com/galaxy-s3/orig-development/i93xx-philz-touch-t2002953 you can also backup efs with PhilZ recovery too.
Click to expand...
Click to collapse
Hi Tall man, Is it possible that my phone motherboard is broken?, my phone has no warranty and ive check it with samsung service center, after a few days of checking they call me and said that they need to replace the motherboard. and they charged me around 200$, hehehe
mac091889 said:
Hi Tall man, Is it possible that my phone motherboard is broken?, my phone has no warranty and ive check it with samsung service center, after a few days of checking they call me and said that they need to replace the motherboard. and they charged me around 200$, hehehe
Click to expand...
Click to collapse
Quite possible but have you tried all the options first like (1) flashing back to stock with Odin also if you have flashed back to stock with Odin did you factory reset after flashing? (2)rescue firmware (only use as last resort because it containes a pit file)
tallman43 said:
Quite possible but have you tried all the options first like (1) flashing back to stock with Odin also if you have flashed back to stock with Odin did you factory reset after flashing? (2)rescue firmware (only use as last resort because it containes a pit file)
Click to expand...
Click to collapse
ok thanks, Will get it back maybe later and i will update you what happen. Thanks. for the help... Is there any things that i can give back to you for helping me?
tallman43 said:
Flash back to stock with Odin and don't forget to factory reset after flashing or you could even try flashing PhilZ recovery with odin boot into PhilZ after flashing and factory reset see if that works if not flash stock and start again.
Click to expand...
Click to collapse
Hi tallman just got my SIII back from samsung service center, they said ther is an I C not working, but now justried to flash philz recover Odin failed to ans it says something non Pit file something like that.
If an IC isn't working then pay for the repair or buy a new phone, flashing won't fix a dead chip.