hello, i bricked my xperia x10 mini pro (u20) i tried to restore it by sony pc companion but my pc cant recognize my device, also not working xrecovery, stuck at se white logo, tryed holding back button then plug in usb but that doesnt work, this is how i bricked my phone:
1. I rooted it
2. i installed xrecovery
3. i unlocked bootloader
4. i installed cm7 through xrecovery but forgot to install kernel and it doesnt boot...
and pc companion , flashtool doesnt recognize my device, PLEASE HELP
and now it completely doesnt turn on it just blinking red light please!!!!!
Marke321 said:
hello, i bricked my xperia x10 mini pro (u20) i tried to restore it by sony pc companion but my pc cant recognize my device, also not working xrecovery, stuck at se white logo, tryed holding back button then plug in usb but that doesnt work, please help!!!
Click to expand...
Click to collapse
There is a thread in the general section with instructions to unbrick it, but here's a little start:
Repair it with SEUS or PC Companion.
Step A: leave your phone disconnected from your PC
Step B: Run SEUS/PC Companion, and select update
Step C: It doesn't recognise your phone because it's disconnected and give you a repair option
Step D: Select it, choose your model, it will download the firmware
Step E: You get a popup, Press the back-button on your phone while it's off and plug in the USB-Cable.
In the case that your phone isn't off, plug in the usb-cable and then press the home- and powerbuttons simultaneously. When the screen goes black, press the back-button.
Step F: Wait till it's done...
SmG67 said:
There is a thread in the general section with instructions to unbrick it, but here's a little start:
Repair it with SEUS or PC Companion.
Step A: leave your phone disconnected from your PC
Step B: Run SEUS/PC Companion, and select update
Step C: It doesn't recognise your phone because it's disconnected and give you a repair option
Step D: Select it, choose your model, it will download the firmware
Step E: You get a popup, Press the back-button on your phone while it's off and plug in the USB-Cable.
In the case that your phone isn't off, plug in the usb-cable and then press the home- and powerbuttons simultaneously. When the screen goes black, press the back-button.
Step F: Wait till it's done...
Click to expand...
Click to collapse
it doesnt working
I have go the same problem here! any solutions?
so can you help me?
Step A: install kernel
Step B: go to the CWM recovery
Step C: click wipe data ,and wipe cache
Step D: Click reboot, Enjoy!
damis515 said:
Step A: install kernel
Step B: go to the CWM recovery
Step C: click wipe data ,and wipe cache
Step D: Click reboot, Enjoy!
Click to expand...
Click to collapse
I CANT go to flashmode..
Marke321 said:
I CANT go to flashmode..
Click to expand...
Click to collapse
Take out your battery for 5 minutes and try again. If you're stuck on the SE logo you certainly have flashmode available too.
Take out your battery connect it through usb then insert battery make sure u use pc companion repair n reflash update PM ME IF ANY PROBLM
Sent from my GT-N7100 using xda premium
AW: help!! im bricked my x10 mini pro (u20)
Marke321 said:
hello, i bricked my xperia x10 mini pro (u20) i tried to restore it by sony pc companion but my pc cant recognize my device, also not working xrecovery, stuck at se white logo, tryed holding back button then plug in usb but that doesnt work, this is how i bricked my phone:
1. I rooted it
2. i installed xrecovery
3. i unlocked bootloader
4. i installed cm7 through xrecovery but forgot to install kernel and it doesnt boot...
and pc companion , flashtool doesnt recognize my device, PLEASE HELP
and now it completely doesnt turn on it just blinking red light please!!!!!
Click to expand...
Click to collapse
If the red LED is blinking, it means your battery is empty! Try recharging your phone normally and then reflash via SEUS/PC Companion.
Please press the thanks button if I heelped .
Kilroy. said:
If the red LED is blinking, it means your battery is empty! Try recharging your phone normally and then reflash via SEUS/PC Companion.
Please press the thanks button if I heelped .
Click to expand...
Click to collapse
i tryed charge through AC with charger and left to charge all night but just blinking red light
Related
if your x10i brick (SE Logo) and can't reboot can't access xrec and can't access flash mode (for flash generic rom)
i have a solution..
1. connect the phone to PC (USB)
2. open superOneClick v1.55 and click shell root icon
3. open FlashTool 0.2.9.1 and click Ask Root Perms
4. click menu advanced --> clean --> clear cache
5. click xrecovery icon
6. click menu advanced --> Xrecovery--> Reboot into Recovery
7. look you phone.. bingo.. u can access Xrecovery and then just install u favorit custom rom n reboot..
8. now u phone normaly n u can access flash mode to flash generic rom..
and.. sory my english is bad hehe...
jakadewantara said:
if your x10i brick (SE Logo) and can't reboot can't access xrec and can't access flash mode (for flash generic rom)
i have a solution..
1. connect the phone to PC (USB)
2. open superOneClick v1.55 and click shell root icon
3. open FlashTool 0.2.9.1 and click Ask Root Perms
4. click menu advanced --> clean --> clear cache
5. click xrecovery icon
6. click menu advanced --> Xrecovery--> Reboot into Recovery
7. look you phone.. bingo.. u can access Xrecovery and then just install u favorit custom rom n reboot..
8. now u phone normaly n u can access flash mode to flash generic rom..
and.. sory my english is bad hehe...
Click to expand...
Click to collapse
sorry i`m spanish and my english is very bad.
My problem: my x10 cant acces flash mode because pc dont detect the phone. Dont charge, etc... the brick block charge dock, mini usb...any solution please.
try thread from DoomLORD : [DEV][How-To] Get Back to Stock Even With Broken / Damaged USB Port in http://forum.xda-developers.com/showthread.php?t=1054818
tarzerixx said:
sorry i`m spanish and my english is very bad.
My problem: my x10 cant acces flash mode because pc dont detect the phone. Dont charge, etc... the brick block charge dock, mini usb...any solution please.
Click to expand...
Click to collapse
Likely the USB port is dead and you have to send it in for repair.
I used flashtool 3.0, pretended I was gonna flash 2.1 onto it and wella it worked. Your idea fixed my phone Dude. Thanks for the help.
pccobra said:
I used flashtool 3.0, pretended I was gonna flash 2.1 onto it and wella it worked. Your idea fixed my phone Dude. Thanks for the help.
Click to expand...
Click to collapse
Please mention the steps, or link, when i press on shell root(in superone click) it keeps on waiting for device. (flashtool never enables ask for root).
NOTE: It happened when I was trying update my ROM Wolfbreak , I did factory rest and all other resets available on xRec . (xcluding sd card format) then i thought i should try reboot before installing new ROM. but it stucks on SE logo screen. please give me some thoughts to make it in working mode again
Thanks
RedAxe said:
Please mention the steps, or link, when i press on shell root(in superone click) it keeps on waiting for device. (flashtool never enables ask for root).
NOTE: It happened when I was trying update my ROM Wolfbreak , I did factory rest and all other resets available on xRec . (xcluding sd card format) then i thought i should try reboot before installing new ROM. but it stucks on SE logo screen. please give me some thoughts to make it in working mode again
Thanks
Click to expand...
Click to collapse
Hapenned the same to me...
I try to follow the steps, but i can't pass step 4 (it's unavaiable the "clean cache" bottom...)
Please help...
Restore original firmware with SEUS
RedAxe said:
...then i thought i should try reboot before installing new ROM. but it stucks on SE logo screen...
Click to expand...
Click to collapse
My X10 mini was a brick (or I thought it was) because it was behaving like you described: the phone was stuck on the SE logo and it wasn't entering Flash Mode although I pressed the back key when the Sony Ericsson white letters were displayed.
Here is my solution
Open SEUS and select your phone. Click Next.
SEUS will wait for the device.
Connect your bricked phone via the USB cable.
Then you must access Flash Mode, at all costs.
SEUS, PC Companion and FlashTool can detect this phone only in Flash Mode.
Note: If your phone is resetting correctly (pressing and holding Power+Center) and the phone is being detected as an unmounted removable drive on the computer as mine did, it should be able to enter Flash Mode, no matter it has been already stuck for ages on the first screen with the white letters. My phone had enough battery charge to go through the whole process.
To enter Flash Mode with the Xperia X10 Mini I had to:
1. Perform a hard reset of the phone (Press and hold Power+Center)
2. As soon as the phone vibrates, release both keys. Phone will restart.
3. The white Sony Ericsson logo will be displayed.
4. Press and hold Power+Center and immediatly the Back key (the three keys at the same time)
5. Keep the keys pressed until the LED turns green.
After doing the correct sequence and entering Flash Mode, the LED turns green and the screen turns completely black. SEUS detected my phone at this point, downloaded the original firmware and installed it automatically.
do u have trick for my problem here forum.xda-developers.com/showthread.php?t=1388476
my x10 just vibrate once and stack on blank screen.
Sent from my X10i using Tapatalk
When I use SEUS It keep saying "You have the newest software available"
I tried the hard reset and all. The phone now just won't start at all
Hi,
i got the same problem what you describe ive stuck at the SE logo and cant get into recovery and i cant use flashtool. i tried to do what you say in the first post, but when i press the shell root button, it says "wait for device" then its not responding, and i cant moce on to the next step... what should i do now?
Ketoth said:
My X10 mini was a brick (or I thought it was) because it was behaving like you described: the phone was stuck on the SE logo and it wasn't entering Flash Mode although I pressed the back key when the Sony Ericsson white letters were displayed.
Here is my solution
Open SEUS and select your phone. Click Next.
SEUS will wait for the device.
Connect your bricked phone via the USB cable.
Then you must access Flash Mode, at all costs.
SEUS, PC Companion and FlashTool can detect this phone only in Flash Mode.
Note: If your phone is resetting correctly (pressing and holding Power+Center) and the phone is being detected as an unmounted removable drive on the computer as mine did, it should be able to enter Flash Mode, no matter it has been already stuck for ages on the first screen with the white letters. My phone had enough battery charge to go through the whole process.
To enter Flash Mode with the Xperia X10 Mini I had to:
1. Perform a hard reset of the phone (Press and hold Power+Center)
2. As soon as the phone vibrates, release both keys. Phone will restart.
3. The white Sony Ericsson logo will be displayed.
4. Press and hold Power+Center and immediatly the Back key (the three keys at the same time)
5. Keep the keys pressed until the LED turns green.
After doing the correct sequence and entering Flash Mode, the LED turns green and the screen turns completely black. SEUS detected my phone at this point, downloaded the original firmware and installed it automatically.
Click to expand...
Click to collapse
u totally saved me =D
X10 mini revived!
Hi,
The procedure described above works fine until you've the phone recognized by the computer.
Here's how It has finally been recognized:
1) Completely switch off the phone (Do not leave it with SE logo).
-You can do the either by removing the battery connector (be cautious) under a rubber on the left(not above) of the camera lens.
-OR when the USB is plugged in,
(1.1) press center + back + power button until power off,
(1.2) then release center and power button AND KEEP back button down(about 2-5 seconds) until green led lights on. remark:LED will stay green until you unplug USB or phone switches on.
(1.3) Unplug USB.
Your phone should be OFF now. SE logo doesn't appear anymore (Wait 30s to be sure)
2) Unplug the USB cable from computer and plug it in another USB port of the PC.
3) At this time, if you plug USB on your X10 mini, it should be recognized as a SEMC device (It has worked for me).
-Success? Go step 4
-Failure, retry (from step 2 should be enough) with another USB port. If you've tryied all ports already, I've no idea.
4) If step 3 is successful, unplug USB.
5) Start SEUS (update service program from SE), choose you phone, follow the instructions on screen. Remark: Even if it says that you've got the last version, there is an "Install" button available on the bottom right corner. Click it!
Hope it'll help.
deBelch.
PS: Many thanks the whole forum for the help provided.
hello guys..my se xperia x10 mini pro stuck on the SE logo..and i tried to press power+ home button but it din't change anything.It also give 0.3sec led green flash while pressing the power and the menu button.can anyone plz help me with this..???
cruzstar said:
hello guys..my se xperia x10 mini pro stuck on the SE logo..and i tried to press power+ home button but it din't change anything.It also give 0.3sec led green flash while pressing the power and the menu button.can anyone plz help me with this..???
Click to expand...
Click to collapse
Update phone using SEUS....
Just google SUES
Definitely it will work....
Sent from my X10i using xda premium
yea i have use the SEUS..by pressing the back button..but it dont work..plz help me
Dear sir i already done that procedures but no use in seus shown u already updater software. plz help me
Cannot unbrick xperia mini E10i
Ketoth said:
My X10 mini was a brick (or I thought it was) because it was behaving like you described: the phone was stuck on the SE logo and it wasn't entering Flash Mode although I pressed the back key when the Sony Ericsson white letters were displayed.
Here is my solution
Open SEUS and select your phone. Click Next.
SEUS will wait for the device.
Connect your bricked phone via the USB cable.
Then you must access Flash Mode, at all costs.
SEUS, PC Companion and FlashTool can detect this phone only in Flash Mode.
Note: If your phone is resetting correctly (pressing and holding Power+Center) and the phone is being detected as an unmounted removable drive on the computer as mine did, it should be able to enter Flash Mode, no matter it has been already stuck for ages on the first screen with the white letters. My phone had enough battery charge to go through the whole process.
To enter Flash Mode with the Xperia X10 Mini I had to:
1. Perform a hard reset of the phone (Press and hold Power+Center)
2. As soon as the phone vibrates, release both keys. Phone will restart.
3. The white Sony Ericsson logo will be displayed.
4. Press and hold Power+Center and immediatly the Back key (the three keys at the same time)
5. Keep the keys pressed until the LED turns green.
After doing the correct sequence and entering Flash Mode, the LED turns green and the screen turns completely black. SEUS detected my phone at this point, downloaded the original firmware and installed it automatically.
Click to expand...
Click to collapse
Hello Guys,
I need your urgent help.
I cannot restore phone with SEUS or Companion. It says I already have the soft.
Getting fatal errors in Flashtool, I am stuck with SE logo and bootloader relocked.
I have the stock kernel but CM7 ROM.
Do you have any other ideas?
Tanks a lot!
deBelch said:
Hi,
The procedure described above works fine until you've the phone recognized by the computer.
Here's how It has finally been recognized:
1) Completely switch off the phone (Do not leave it with SE logo).
-You can do the either by removing the battery connector (be cautious) under a rubber on the left(not above) of the camera lens.
-OR when the USB is plugged in,
(1.1) press center + back + power button until power off,
(1.2) then release center and power button AND KEEP back button down(about 2-5 seconds) until green led lights on. remark:LED will stay green until you unplug USB or phone switches on.
(1.3) Unplug USB.
Your phone should be OFF now. SE logo doesn't appear anymore (Wait 30s to be sure)
2) Unplug the USB cable from computer and plug it in another USB port of the PC.
3) At this time, if you plug USB on your X10 mini, it should be recognized as a SEMC device (It has worked for me).
-Success? Go step 4
-Failure, retry (from step 2 should be enough) with another USB port. If you've tryied all ports already, I've no idea.
4) If step 3 is successful, unplug USB.
5) Start SEUS (update service program from SE), choose you phone, follow the instructions on screen. Remark: Even if it says that you've got the last version, there is an "Install" button available on the bottom right corner. Click it!
Hope it'll help.
deBelch.
PS: Many thanks the whole forum for the help provided.
Click to expand...
Click to collapse
nope...didnt work...there is NO Install beneath...wonder why? is it i am using the latest SEUS?
greetings. please i followed your steps to unbricked my device but my x10 cant boot into flash-mode. whenever i try to connect it via flash-tool. the green light comes on but in some few seconds it boot automatically. and when i try to flash anything it boot automatically. please help me
---------- Post added at 12:21 AM ---------- Previous post was at 12:16 AM ----------
greetings. please i followed your steps to unbricked my device but my x10 cant boot into flash-mode. whenever i try to connect it via flash-tool. the green light comes on but in some few minutes it boot automatically. and when i try to flash anything it boot automatically. please help me
I try to Install New Rom(GingerDX.v017(nAa+Kernel)) in Custom Kernel.
I did followed the instruction as in this http://forum.xda-developers.com/showthread.php?t=1200675
But I didn't Unlock bootloader and install Update.zip from XRecovery.
When I reboot my phone it didn't boot and Freeze on Sony Ericsson white brand.
Please Help me guys.My Phone Need Your Helps.
Sorry For my bad English.
I have the same problem! but I try install the rom gingerbread of nobodyall and I try no instal via xrecovery update.zip and this say me error! and I try to reboot and this turn on and freeze with the letters "sony ericsson" :S somebodyhelp us !
Sure, just need to read FAQ and post the question in proper forun section!
http://forum.xda-developers.com/showthread.php?t=840356
First post
Dramaqueens....
akorouf said:
I try to Install New Rom(GingerDX.v017(nAa+Kernel)) in Custom Kernel.
I did followed the instruction as in this http://forum.xda-developers.com/showthread.php?t=1200675
But I didn't Unlock bootloader and install Update.zip from XRecovery.
When I reboot my phone it didn't boot and Freeze on Sony Ericsson white brand.
Please Help me guys.My Phone Need Your Helps.
Sorry For my bad English.
Click to expand...
Click to collapse
Don't worry i know what to do.
First download PC companion on computer. Then install drivers on computer. After that open PC companion and click Update phone on Support zone. You will see a window witch will ask you if you want to restore your phone. When computer will be ready for restoring your device plug in your phone into computer via usb, hold home and power button until your phone turn off and quickly press and HOLD back button(if your phone is on). If it is not, just press back button and THEN plug it to computer KEEPING holding back button. After restoring you will have a new x10 mini=). Good luck.
P.S. sorry for my bad English
Mrakoris/ said:
Don't worry i know what to do.
First download PC companion on computer. Then install drivers on computer. After that open PC companion and click Update phone on Support zone. You will see a window witch will ask you if you want to restore your phone. When computer will be ready for restoring your device plug in your phone into computer via usb, hold home and power button until your phone turn off and quickly press and HOLD back button(if your phone is on). If it is not, just press back button and THEN plug it to computer KEEPING holding back button. After restoring you will have a new x10 mini=). Good luck.
P.S. sorry for my bad English
Click to expand...
Click to collapse
This is about unlocking the bootloader and then install custom ROM.
rooterdam said:
This is about unlocking the bootloader and then install custom ROM.
Click to expand...
Click to collapse
But the title is "break my x10 mini".
Mrakoris/ said:
But the title is "break my x10 mini".
Click to expand...
Click to collapse
Yes.
Sent from my E10i using XDA App
Wrong forum, not related to development AT ALL.
remove black rubber behind the phone and thr u can see the battery pin...unplug and plug it the phone will be switched off....now use SE pc companion and restore ur x10 mini.....
dung flash tool de dua ve rom stock. minh da tung bi nhu the nay va da lam duoc. sorry i'am Vietnamese
My phone was working, I had MiniCM7Pro V21 Installed and I tried to install the CWM Recovery Version 5, because in my installed version the Battery Stats Wipe wasn't working and my battery was draining very quickly.
After the CWM Recovery Version 5 Installation my phone got bricked because it's getting stuck in Sony Ericsson Text.
I am trying to Reflash but only Flash button is active and it doesn't show any firmware though I have copied both zip and unzipped files in firmware folder in FlashTool_0.2.9.1
I tried to use SuperOneClick to root but it gets stuck in Waiting for device. Kindly help.
It gives the following error :-
OK
Pushing rageagainstthecage...
error: device not found
FAILED
I have installed it.
ggsetup-2.2.0.10
Press home+power button until you see black screen, then immediately press and hold back button plugging your phone into computer. When you see black screen and green flashlight-> your phone is correctly booted into restore mode. From this mod, you can restore your phone, using SE restore tools: SEUS and Sony Ericsson Pc Companion, or flash stock kernel using flashtool.
P.S. If you wont see black screen and green flashlight for the first time, try it again, again until you putt your phone safely into restore mode.
Thank you for the reply, the black screen do u mean the black screen with Sony Ericsson Text ? When I Press Home+Power Button I can see the Sony Ericsson Text Black Screen and then I press and hold the back buton Pluging my phone into computer I keep on seeing the Sony Ericsson Text Black Screen with no green flashlight.
I am still trying.
Black screen without any logos. Just black screen. Don't forget to hold back button.
Doing that, but it still gets into Sony Ericsson Text Screen, I press home and the power button, black screen for a while and I press back button and try to connect the phone the Sony Ericsson logo appears.
But When the cable connected and back button pressed the I can see the charging image and green light flash.
and in Flasher it shows the following :-
07/007/2012 23:07:36 - INFO - Device connected with USB debugging off
07/007/2012 23:07:36 - INFO - For 2011 devices line, be sure you are not in MTP mode
camelgrg said:
Doing that, but it still gets into Sony Ericsson Text Screen, I press home and the power button, black screen for a while and I press back button and try to connect the phone the Sony Ericsson logo appears.
But When the cable connected and back button pressed the I can see the charging image and green light flash.
and in Flasher it shows the following :-
07/007/2012 23:07:36 - INFO - Device connected with USB debugging off
07/007/2012 23:07:36 - INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
reflash to stock kernel and ROM
- install PC companion.
- connect phone in repair mode
- install drivers.
- after driver installed, reflash stock kernel using flashtool
- after stock kernel installed, reflash stock ROM using PC companion
- after stock kernel and ROM flashed,your phone should be like just when you bought it.
- bootloader should be locked now
- Root again
- unlock bootloader again
- Flash nAa again
- Flash cm7 again
- DONE!
Thank you for your reply, I have PC Companion Installed, I have a Generic Firmware downloaded, I have no idea what a stock kernel is ?
I am not able to get into this repair mode, I think this mode is when the flash light flashes ?
from the Bootloader part, I think I can do it because I did it before following a tutorial. If you can lease help me with the prior stage to bootloader lock would be highly grateful.
Thank u
Ones again: to enter restore mode you have to power off your phone, using home+power buttons or powering off like I have on picture. Then press and hold back button, while plugging it into computer.
camelgrg said:
Thank you for your reply, I have PC Companion Installed, I have a Generic Firmware downloaded, I have no idea what a stock kernel is ?
I am not able to get into this repair mode, I think this mode is when the flash light flashes ?
from the Bootloader part, I think I can do it because I did it before following a tutorial. If you can lease help me with the prior stage to bootloader lock would be highly grateful.
Thank u
Click to expand...
Click to collapse
- To relock bootloader you need to flash stock kernel which is 2.1.0.a.06 kernel.
- You need to flash stock kernel because if you have nAa kernel or any custom kernel installed, you wont be able to repair your phone using pc companion.
- After flashing stock kernel:
1. open pc companion
2. click support zone. (click start below it)
3. after clicking start, there should be a new window which also has a "start button"
4. on the 2nd start button, there should be a button under it which says "repair"
5. after clicking repair, just follow the steps for you to connect your phone in repair mode.
6. complete the repair installation.
7. DONE!
8. Bootloader should be locked now.
Thank you I was able to restore through PC Companion by getting into repair mode, however I didn't use flashtool to flash prior to usin PC Companion.
Thank you both for your kind support, Highly appreciated.
camelgrg said:
Thank you I was able to restore through PC Companion by getting into repair mode, however I didn't use flashtool to flash prior to usin PC Companion.
Thank you both for your kind support, Highly appreciated.
Click to expand...
Click to collapse
You are welcome my friend
And how should I proceed if I have a really hard brick (u20a)?
I tried to flash nAn on it, followed some instructions to unlock the bootloader, but something went wrong, the results were not the ones that should had been, and I made the mistake of turning it off. Now whenever I try to power it on, it doesn't do squat.
The only thing that makes me think it's still alive is that (after several months) I plugged it in and it began blinking on red (perhaps really low battery).
I've tried to pull the battery, put it back in, press back (keeping it pressed), and then plugging the cable to the computer and nothing.
Any ideas? Or should I flush it down the toilet? :crying:
x10 mini unbricking
Mrakoris/ said:
Press home+power button until you see black screen, then immediately press and hold back button plugging your phone into computer. When you see black screen and green flashlight-> your phone is correctly booted into restore mode. From this mod, you can restore your phone, using SE restore tools: SEUS and Sony Ericsson Pc Companion, or flash stock kernel using flashtool.
P.S. If you wont see black screen and green flashlight for the first time, try it again, again until you putt your phone safely into restore mode.
Click to expand...
Click to collapse
i tried the thing you suggested, but the green light only lasts a while even if i continue to hold the back button. also, i am not able to repair my phone through se pc companion, as it keeps cancelling the repair update the moment the green light stops appearing. any help? thanks!
Hi,
I tried to upgrade mi xperia neo to Tweake 1.0 with the recovery, and now dont start.
When i power the phone or plug the charger appears the Sony Ericcson logo and continues there all time.
I can´t enter in flash mode (son i can´t use seus or flash tool), always appears other time the sony ericsson logo.
The bootloader is closed.
Can anyone help me?
Thanks
Are you sure that you are doing the correct procedure to use flash mode on the phone? Here it is:
1. Turn off the phone.
2. Remove the battery for at least 10 seconds.
3. Insert the battery again.
4. Press and hold the "back" button on the phone.
5. While still holding the "back"button pressed connect the phone with teh usb cable to the pc. Flashtool should now recognize the phone.
alekmzn said:
The bootloader is closed.
Click to expand...
Click to collapse
So, there are two ways:
1. flashmode (green LED) have still work, so do as neptun2 advices.
1. Turn off the phone.
2. Remove the battery for at least 10 seconds.
3. Insert the battery again.
4. Press and hold the "back" button on the phone without pressing "power on" button
5. While still holding the "back"button pressed connect the phone with teh usb cable to the pc. Flashtool should now recognize the phone.
Click to expand...
Click to collapse
or
2. if recovery still works, try to do all wipes again (data, cache, dalvik-cache)
Thaks to all.
I can´t access to the recovery, and i don´t see the green led when i plug the cable.
check this out. may be it will help you...
http://forum.xda-developers.com/showthread.php?t=1254409
Cheking, Thanks!
Did u try wotan client ? Its pretty simple and easy to use !, Google it if u didnt already.
Sent from my Xperia Neo using XDA
Moursy93 said:
Did u try wotan client ? Its pretty simple and easy to use !, Google it if u didnt already.
Sent from my Xperia Neo using XDA
Click to expand...
Click to collapse
the problem of Wotan client is that is needed flash mode, so i can´t use it.
Thanks!
At this moment the problem is solved.
It has damaged the trim area, Alejandrissimo support me to repair de problem.
Thnaks to all!
Great notice for you!!!!!
Congratulations!!!!!!!!
alekmzn said:
At this moment the problem is solved.
It has damaged the trim area, Alejandrissimo support me to repair de problem.
Thnaks to all!
Click to expand...
Click to collapse
I'm with the same problem here in my Xperia Neo, it just shows Sony Ericsson, i can't open recovery, can't do hard reset, and can't reset via PC Companion.. :/
@edit
problem solved, i made the bootloader (first time *-*), then i flashed a stock rom by SE, and it worked!
Hi,
I have the SE X10i, one day i tried to power it on and it showed the 3 flash red light, so i charge the battery and then tried to power on the phone.
The phone vibrate once and nothing going up, the screen stay black, no light at the keys.
I tried to install new rom via SERUS, it fails.
tried install via flashtool and it stuck on flashing loader.
As i understand from the flashtool the phone can get into flashmode.(back key and insert the usb cable).
Any help please how to wake up this phone alive.
Thanks.
wo88les said:
In flashtool select the Rom you want to flash
Remove battery
Insert USB cable
When software asks you to press back, hold back while putting battery back in, should go straight to flash mode and flash
Sent from my Xperia X10 using xda premium
Click to expand...
Click to collapse
Also try downloading another stock Rom, maybe the one you have has became corrupted?
Hope that helps if not, you may need a more senior member to help
Sent from my Xperia X10 using xda premium
pumemule said:
Hi,
I have the SE X10i, one day i tried to power it on and it showed the 3 flash red light, so i charge the battery and then tried to power on the phone.
The phone vibrate once and nothing going up, the screen stay black, no light at the keys.
I tried to install new rom via SERUS, it fails.
tried install via flashtool and it stuck on flashing loader.
As i understand from the flashtool the phone can get into flashmode.(back key and insert the usb cable).
Any help please how to wake up this phone alive.
Thanks.
Click to expand...
Click to collapse
Hey pumemule,
Turn off phone or take out battery
Conect your USB cable to PC
Open Flashtool
Select Kernel that you wanna flash
Wait for pop up message
Connect your phone
Hola BACK button
Re-insert the battery
check this video to show you how to put on flashmode Xperia X10 on flashmode
You can check any for any stock ROM on android development
Hope that helps
Regards
First download the stock ftf file from the below link
http://forum.xda-developers.com/showthread.php?t=1749426
Turn off phone and take out battery
Conect your USB cable to PC
Open Flashtool
Select Kernel that you wanna flash (stock Rom)
hold back button
Re-insert the battery
Connect your phone
a green led will appear.....
then the work is done......
restart your phone
It helped me a lot...
and many people