Hi
I'm a complete noob in this matter but I want to Root my device, I'm following the instructions in this thread: http://forum.xda-developers.com/showthread.php?t=2107775
My phone's version is 6.1.1.B.1.54
I'm at this point
A window will be opened saying to connect your device.switch off your phone for 30 secs.now connect the USB cable to PC(not on your device).now press down the vol.down button and hold it while connecting the USB to your phone.[now the flashtool will start flashing.but if you are doing for the first time sometimes the drivers are not able to detect the drivers of your phone and the phone starts charging in a normal way instead of flashing.don't worry.Disconnect the USB from phone only.wait for 10-20 secs.repeat from step v again and then connect your device while pressing vol.down button.the flashtool will detect your device and start flashing.)
You will be able to see percentage below.after it is finished it will be written there.disconnect USB cable from your phone only after watching it.
But I'm stuck at this point, theres absolutely no change at all at the process, this screen has been like that for like 20 mins
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
One mid-experienced friend is telling me that it seems that the program is doing nothing, that I should turn the phone on, but I know the risk is BRICK, and hell I dont want that
So if any of you more experienced users could tell me what to do or what to expect I would be greatly thankful
edit: image seems not to upload properly so here is the link http://prntscr.com/uenfj
guys please forgive me ... im a complete fa...
dont pay attention to me
Use
(Root_with_Restore_by_Bin4ry) method..
Sent from my LT22i using xda app-developers app
Related
I was attempting to Odin back to stock and my phone got disconnected.
Now it says "software update fail" cant seem to get anything, recovery, or download or anything.
Help?
Get a jig
Sent from my SGH-T959 using XDA App
The jig doesnt work either...
Pops up the software fail message as well...
post a pic
Sent from my SGH-T959 using XDA App
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://img.photobucket.com/albums/v293/kidynomite/20111014_215222.jpg
Try these steps:
1. Unplug USB from the phone (leave the other end alone). You already unplug lolz. Make sure the other end is plug in to your PC
2. Remove the battery
3. Press and hold both Vol Up and Down (don't let go until you finish step 6)
4. Press and hold Power button (don't let go until you finish step 6)
5. Plug the USB into the Phone
6. Slide the Battery in
Good luck
kidynomite said:
http://img.photobucket.com/albums/v293/kidynomite/20111014_215222.jpg
Click to expand...
Click to collapse
Still the same results, tried holding up only, down only, both vol buttons and all three.
Open Odin & plug your phone into your pc & see if you get the yellow COM port box. If you do , just Odin from there.
!
I'm not too sure what happened, but just sat there and held all buttons with all cables plugged in for about 10 minutes and it worked...
Thanks for all your help!
Hi I have the Galaxy Tab and I had the same problem then I somehow got it worked but then I don't have market or Gmail in this now.I'm currently in China and I get some stuff in Chinese stuff.
Excuse me, I got a problem.
First of all, when i was trying to flash the qualcomm bootloader, i got this error "Loading hashblock failed with ‘Messenger encountered error ‘Referencia a objeto no establecida como instancia de un objeto.’’". And the process stucked at 50%.
But, It seems to have qualcomm bootloader already, cuz when i plug in the phone, windows asks to format my device and it pops up Qualcomm driver.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So, i try to continue the next step in Ubuntu. But Ubuntu can't detect all partitions...
Before pluging in, i got sda,sda1,sda2
After pluging in, i got this pop-up windows
and sda,sda1 sda2 sda5 sda6 sdb sdc
So, is there anything i can do now?
before plugging phone in with linux booted have turned phone off.. wait 5 seconds ... hold volume up and press power --- wait for short buzzz --- now plug usb lead into phone.....
now open DISK UTILITY
it looks like this...
now see how it goes
....".from your picture it looks like you havent pressed vol up while turning device on, thats the only way i could replicate your result anyway...."
(thanx to vova1609 for pic link)
Hi! Guys
Now i'm using Sony Xperia S (LT26i),, Today my phone tell me have the new firmware for update,
Then i connected my phone with Sony PC Contention.
I click update firmware, then the program had download it, and installed to my phone.
while install firmware had some accident my computer had shut it down.
Then i turn on my computer and connect my phone.
Sony PC Contention said Connect to Sony Mobile, but didn't tell what the model.
My phone show green LED and the screen show some icon like my phone don't has firmware..
how should i do next ...
Thank in advance
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
have u tried using seus? or download a ftf of your region then flash via flashtool
flashtool
firmwares
Happen to me last weak too.
What i do is open up my pc. Then open seus. Chose ur model and it would continue from before.
Sent from my LT26i using xda app-developers app
First of all download this https://hotfile.com/dl/169829627/65a569d/flashtool-0.9.1.0-windows.exe.html
after that...install it on your pc!
then download this http://www.multiupload.nl/X9EW2A84SH
run the program(flashtool)
turn of your phone and leave that way at least 10 seconds.
drag & drop the file that you downloaded from the second link into the program`s window
clink ok at the window that appears
when asked to plug in your device keep the volume down and plug your phone into the usb.
after 10 seconds you can release the volume down button
wait for the process to finish!
reboot your device and that`s all
it should work
hope that helps you!
Thank You for all,,,
I done by use Sony Ericsson Update Service
I have a Xolo Q700 and I broke it. The screen is cracked and I can't type my password.
By default, USB Charging mode is on ... so no use connecting it to my pc. I also tried rebooting but the USB charge stays default.
How do I control my phone now coz the OS is working fine. I cannot login.
All my data is in phone memory. How do I atleast get that data ?
glidero2l said:
I have a Xolo Q700 and I broke it. The screen is cracked and I can't type my password.
By default, USB Charging mode is on ... so no use connecting it to my pc. I also tried rebooting but the USB charge stays default.
How do I control my phone now coz the OS is working fine. I cannot login.
All my data is in phone memory. How do I atleast get that data ?
Click to expand...
Click to collapse
If you have CWM, you can try to mounting storage
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
Hello everyone,
I deleted some of the bloatware my Lenovo A850i came with, and after thatit rebooted and got stuck at the logo screen. It animates and all, and then doesn't move forward.
If I press power+volume down, it says meta mode but doesn't really do anything as far as I can tell.
Power+volume up brings up a chinese factory mode where I could wipe the whole thing (which I'd rather avoid). When I first entered this mode while connected to my PC, the PC installed the phone's driver, since then, nothing.
Power+both volumes brings me to an android screen where I could also wipe the phone, or install an update from the phone.
If I simply power up the phone and connect it to the PC, I can see a Lenovo Suite install drive, and the two internal drives my phone has, but they are vague and unopenable. It says that I should inster a disc.
I have tons of pictures on the phone, and tons of contacts that for some reason I saved on the phone itself, bad mistake. So I would like to download the internal data before wiping the thing.
Please help!
Update:
If I take the battery out and connect the phone to the PC, I can hear a quick hardware recognition sound, then immeditely the harware disconnected sound. If I watch the Device Manager, I can see a port appear and disappear.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bump?