when there is a software update notifications from phone, I immediately try to update via the phone and when the software update my phone died, I tried to reboot but still could not come back to life, there is a solution,please...
ilhamwae said:
when there is a software update notifications from phone, I immediately try to update via the phone and when the software update my phone died, I tried to reboot but still could not come back to life, there is a solution,please...
Click to expand...
Click to collapse
You can try reflashing your firmware using flashtool. Just download the ftf file for your device then connect your device in flashmode. Then flash the ftf.
Press thnx if I helped.
Sent from my ST18i
Was ur bootloader unlocked?
Press THANKS if I helped,
Best Regards,
AJ
skb6T9 said:
You can try reflashing your firmware using flashtool. Just download the ftf file for your device then connect your device in flashmode. Then flash the ftf.
Press thnx if I helped.
Sent from my ST18i
Click to expand...
Click to collapse
Thank you in advance,
Sorry i am nowb here may i ask link for it
Sent from my R800i using xda app-developers app
Its important to know whether your bootloader is unlocked,
If it is and you did over the air update u will brick it. There's a fix in stickies of general.
If not do the above mentioned. Find ftf for device (google). flash it via flashtool
Related
hi im sending my phone in for repair (dodgy usb charger connection) and i managed to flash the generic 2.1 ftf with flashtool, but the baseband is the old .46 will they be able to know what ive done? or is it all good to go, thanks in advance
andddy said:
hi im sending my phone in for repair (dodgy usb charger connection) and i managed to flash the generic 2.1 ftf with flashtool, but the baseband is the old .46 will they be able to know what ive done? or is it all good to go, thanks in advance
Click to expand...
Click to collapse
If you can, attach phone to pc and update using seus our pc companion, that will put you on the latest official version and they won't know a thing
Edit
Make sure you click factory reset and update
Sent from my X10i using XDA App
gregbradley said:
If you can, attach phone to pc and update using seus our pc companion, that will put you on the latest official version and they won't know a thing
Edit
Make site you click factory reset and update
Sent from my X10i using XDA App
Click to expand...
Click to collapse
wish i could but it not even charge at all now. so going to have to leave it, if they say anything il just act dumb and say iv never heard of the xda forum lol the phone will be totally dead so they wont be able 2 power it on so hopefully they will just change out the motherboard
lol, i once sent one with Wolfbreak's CM6 and they just reseted it via seus and repaired the phone
hello guys..
i really need firmware for my e10i in .ftf file after my phone was stuck in sony ericsson logo..
i will flashing my phone with flashtool, but this flashtool just can read firmware in ftf file..
any one have some solution for this problem?
i really needs some..
thanks..
You could try the repair option in PC Companion. It's by far the easiest solution.
Just about all the downloads for firmware for flashtool has been removed for some reason or other
SmG67 said:
You could try the repair option in PC Companion. It's by far the easiest solution.
Just about all the downloads for firmware for flashtool has been removed for some reason or other
Click to expand...
Click to collapse
thanks SmG67 my phone has been flashed.. but now sim card not detected yet,, do you have any solution for this problem?
See your other post Flash stock and relock your bootloader and hope your radio-capabilities come back
Hi, im here to ask you guys how do i unbrick my phone. it remain at the SE logo no lights and everything else, i use this flashtool and ask or perm root then it reboot and it stuck there, i remove the battery and still the same,please dont tell me i have to go repair it at the shop because i did that and it cost alot of $$$:crying::crying:
Try to use Sony Update Service to reflash Stock Rom again.
Sent from my SO-01C using xda premium
you mean the sony companion? if it is then i have no hope cause i cant connect to it
Do flashtool recognize ur phone? You should be able to flash a stock firmware again
GreenieDroid said:
you mean the sony companion? if it is then i have no hope cause i cant connect to it
Click to expand...
Click to collapse
No, I mean Sony Update Service...Or if you can boot in to Xrecovery, you can use a Flashtool to flash any Rom..
Hello,
today I wanted to restore a CWM restore on my neo V (.587), but i forgot that backup IS GINGERBREAD. Now the phone is softbricked. Flashtool is stuck at around 13% (system.sin) and SUS also cannot succesfully flash. I googled for solutions, but haven't found any. Alsom my bootloader is locked (unlockable). I tried flashing two different 587 FTFs, none flashed. Also, should i check or uncheck the final verification? Please help me! :crying:
After restoring the backup,of GB you can just flash a GB kernel ... This soft brick is caused as you had ics kernel on a GB Rom which won't boot!
Try flashing a GB kernel .... Instead of whole Rom ...
Sent from my MT11i using xda premium
Ghostfreak NB said:
After restoring the backup,of GB you can just flash a GB kernel ... This soft brick is caused as you had ics kernel on a GB Rom which won't boot!
Try flashing a GB kernel .... Instead of whole Rom ...
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
I already half-flashed (stuck at ending flash session at 14%) ICS with flashtool so i,m afraid that won't help me.
By the way, will Sony repair it? How expensive will the repair be? :crying:
Re-Flash .587 fw using flashtool and flash stock ics kernel... Ull gt ur phone to boot... If u havent unlocked ur bootloader use pc companion and repair it
Press thanks if I helped
Sent from my MT11i using Tapatalk 2
Kecal79 said:
By the way, will Sony repair it? How expensive will the repair be? :crying:
Click to expand...
Click to collapse
It shouldn't cost you if you've warranty!
Sent from my MT11i using xda premium
was rooted, used flashtool on it. No more warranty.
Kecal79 said:
Also, should i check or uncheck the final verification? Please help me! :crying:
Click to expand...
Click to collapse
You should uncheck final verification..I know u've tried twice..but try again..nd use a diff usb port..
Kecal79 said:
was rooted, used flashtool on it. No more warranty.
Click to expand...
Click to collapse
Since they can't turn on phone in this condition, meaning first they need to flash it, root will be gone after that.
And you won't do anything stupid like telling them you used some unofficial program for flash, right? .
So there is no way they will know you root it and used flashtool.
And now about your problem. Are you using latest flashtool?
Can you show us log of flashing?
And what is exact problem when you try flashing it with sony update service?
Madfysh said:
Since they can't turn on phone in this condition, meaning first they need to flash it, root will be gone after that.
And you won't do anything stupid like telling them you used some unofficial program for flash, right? .
So there is no way they will know you root it and used flashtool.
And now about your problem. Are you using latest flashtool?
Can you show us log of flashing?
And what is exact problem when you try flashing it with sony update service?
Click to expand...
Click to collapse
Okay, will try to flash again. The log looks perfectly okay, as usual, but while flashing system.sin, it freezes for a few minutes (at 14%), and says Ending flash session and will stay at this message forever. I'm on Flashtool 0.9.8.0, and i guess i won't try to flash it again. I'm bringing it to a repair center (is that the right word? my english is not the best). And the phone CAN be turned on, but will only show the Sony screen and then the "orange triangle and a phone" screen. Guess they won't find out about the flashtool, I'll just say that I was updathing via SUS (in fact, it WAS the last thing i was doing with my phone ) and they'll hopefully fix it. Thanks for your help, next time I'll update my Flashtool.
If you haven't took your phone to a repair center yet, try this (i had the same problem):
Try reinstalling the drivers flash tool needs to recognize your phone.
If that didn't work, try another PC or another Windows. Sometimes the problem is pc, not the phone.
Sent from my Haida using Tapatalk 2
SIMMORSAL said:
If you haven't took your phone to a repair center yet, try this (i had the same problem):
Try reinstalling the drivers flash tool needs to recognize your phone.
If that didn't work, try another PC or another Windows. Sometimes the problem is pc, not the phone.
Sent from my Haida using Tapatalk 2
Click to expand...
Click to collapse
Tried two PCs, updated drivers a billion times. No luck. But the phone is already in a repair center. Thank you guys anyway.
Hi, i have an Xperia U (ST25a) since yesterday.
It has Android GB 2.3.7 and i want to upgrade it to ICS 4.0.4 but i'm having some troubles.
I want to try firmware "Xperia U (ST25i)_6.1.1.B.1.89_ICS_4.0.4_Tim_Italy" and when i want to excluide BASEBAND i can't do it, even i can't choose Wipe.
What i'm doing wrong or what do i have to do?
I let you a pic.
Anyone?
choose the firmware then you will find a tick next the baseband . just tick it out
Sent from my ST25a using xda app-developers app
Update flashtool plz
If i choose the firmware this image appear, but i'm afraid to connect the phone because it may start flashing.
By the way, i have flashtool v0.9.10.1, how can i update it? i can't see any file or option to do that.
HEROEdelREVES said:
If i choose the firmware this image appear, but i'm afraid to connect the phone because it may start flashing.
By the way, i have flashtool v0.9.10.1, how can i update it? i can't see any file or option to do that.
Click to expand...
Click to collapse
Its latest flashtool no need to update
When u select any ftf on flashtool
U can exclude several parts like kernel, data, system... Can u try it on a different pc and report back
Also flashing wont start unless u connect the swtiched off phone to pc with vol down button pressed
Sent from my ST25i using Tapatalk 2