sorry about this noob question..
i want to flash xkernel in my ray using flashtools, everything ok, 0 bad block..
but, when turn on my ray, it just stuck in xkernel logo or it will boot again..
i used ics stock rom and i have unlocked bootloader..
i also try flashing lupus, ctcaer, but the problem are same.. stuck in logo or booting again..
but when i ty flykernel, it can boot normally
help me because i want try xkernel..
thanks in advance and sorry for my english
AW: [Q] problem sirkay xkernel st18i
kurokuroninja said:
sorry about this noob question..
i want to flash xkernel in my ray using flashtools, everything ok, 0 bad block..
but, when turn on my ray, it just stuck in xkernel logo or it will boot again..
i used ics stock rom and i have unlocked bootloader..
i also try flashing lupus, ctcaer, but the problem are same.. stuck in logo or booting again..
but when i ty flykernel, it can boot normally
help me because i want try xkernel..
thanks in advance and sorry for my english
Click to expand...
Click to collapse
you have flashed a kernel which is not compatible with the rom (means you maybe flashed a jb kernel on a ics rom or something like this). be sure that your kernel is for stock ics..read the first posts of the thread from the kernel you want to use.
sometimes u need a full wipe to work with new kernel
rob rich said:
you have flashed a kernel which is not compatible with the rom (means you maybe flashed a jb kernel on a ics rom or something like this). be sure that your kernel is for stock ics..read the first posts of the thread from the kernel you want to use.
Click to expand...
Click to collapse
I'm using iced bean rom and try flashing xkernel v9.587d..
does it compatible?
always stuck in xkernel logo when booting or reboot again..
RavinduSha said:
sometimes u need a full wipe to work with new kernel
Click to expand...
Click to collapse
thanks, i will try it
kurokuroninja said:
I'm using iced bean rom and try flashing xkernel v9.587d..
does it compatible?
always stuck in xkernel logo when booting or reboot again..
thanks, i will try it
Click to expand...
Click to collapse
Flash 9.587c kernel...
This is working for me...
Press thnx if I helped.
Sent from my ST18i
Related
touchscreen work fix work, flash hybrom v5
http://forum.xda-developers.com/showthread.php?t=1423562 FIX-work
screen-OK
Thank you very much to all.
what is your devices actually ? sk17i (mini pro) or st15i (mini) ?
just make sure you are download the correct file ..
bambis880 said:
touchscreen nod found touch
seus update -yes not found
fix -- http://forum.xda-developers.com/showthread.php?t=1423562 - yes nod found
please help me
Sorry my English is easy Google translator
Click to expand...
Click to collapse
have u make any backup before flashing the rom?
i also try that rom on my sk17i XMP, but it stucked in SE watermark on 1st boot.. i need to reflash back to stock rom-.-'
StereO_ said:
have u make any backup before flashing the rom?
i also try that rom on my sk17i XMP, but it stucked in SE watermark on 1st boot.. i need to reflash back to stock rom-.-'
Click to expand...
Click to collapse
if you were stucked in SE bootanimation on first boot, try to restart the phone ..
if it didn't solve the problem, it might be the kernel and firmware is your problem that doesn't support hybrom v11
i recommended you to flash .62 firmware using flashtool, then flash KRsH kernel v3.0 from here. After that install hybrom v11 via CWM
I've been try on my sk17i and it is 100% works
______________
My devices has unlocked bootloader, so I don't know if this ways might be not working in locked bootloader
OK work
phazax said:
if you were stucked in SE bootanimation on first boot, try to restart the phone ..
if it didn't solve the problem, it might be the kernel and firmware is your problem that doesn't support hybrom v11
i recommended you to flash .62 firmware using flashtool, then flash KRsH kernel v3.0 from here. After that install hybrom v11 via CWM
I've been try on my sk17i and it is 100% works
______________
My devices has unlocked bootloader, so I don't know if this ways might be not working in locked bootloader
Click to expand...
Click to collapse
yes, what i will 1st to do is to unlock bootloader in order to use hybrom_v11 , but im considering my phone warranty will be avoided.
Guys what kernel is better for this rom?
Tyrigi said:
Guys what kernel is better for this rom?
Click to expand...
Click to collapse
flash KRsH kernel v3.0 from here
StereO_ said:
flash KRsH kernel v3.0 from here
Click to expand...
Click to collapse
Info: 1,6ghz or 2,00ghz? I lost my apps-data? It's good for hybroom? Can I reset my sd card after installed? Thanks a lot sorry for a lot questions.
Regards Tyrigi.
now im using this http://forum.xda-developers.com/showthread.php?t=1349630 who is better?
Tyrigi said:
Info: 1,6ghz or 2,00ghz? I lost my apps-data? It's good for hybroom?
Click to expand...
Click to collapse
any version u can use, but use at your own risk.
no, your apps-data will not lost.
yes, because KRsH Kernel v3.0 is optimized for XMP.
Tyrigi said:
Can I reset my sd card after installed? Thanks a lot sorry for a lot questions.
Regards Tyrigi.
now im using this http://forum.xda-developers.com/showthread.php?t=1349630 who is better?
Click to expand...
Click to collapse
installed kernel modules will not affected sd card data, so no need to reset.
its same what im gave to u-.-
StereO_ said:
any version u can use, but use at your own risk.
no, your apps-data will not lost.
yes, because KRsH Kernel v3.0 is optimized for XMP.
installed kernel modules will not affected sd card data, so no need to reset.
its same what im gave to u-.-
Click to expand...
Click to collapse
Thanks for reply i've installed 1,6ghz kernel you?
i not install any modelus kernel, because i dont want unlock bootloader, im considering my phone warranty
StereO_ said:
i not install any modelus kernel, because i dont want unlock bootloader, im considering my phone warranty
Click to expand...
Click to collapse
You can lock later the bootloeader lol
Tyrigi said:
You can lock later the bootloeader lol
Click to expand...
Click to collapse
once u unlock bootloader your warranty will be avoided because it wipe all drm data even though u relock it back.
CLOSED
it's good to see another DEV joining & enlightening our NEO V Family
i'm on cm9 will try when i am on stock , GREAT WORK THNX
Thanks DEV for developing this kernel as i just tested it on my NEO V on STOCK ROM .62 & it works flawlessly ......
Thanks
Download link not working.
Here is the download link - http://www.mirrorcreator.com/files/0XV5EK6H/kernel.img_links
archijit said:
Download link not working.
Click to expand...
Click to collapse
The link is working fine.I just checked it.
wi fi error with emannxperia rom.
archijit said:
wi fi error with emannxperia rom.
Click to expand...
Click to collapse
The error is probably with the rom and not with the kernel, because with the stock rom works perfectly...
After flashing this kernel my neo v gets rooted on .62 stock ROM ....
but will this rooted ROM work if i change the kernel to something else like nightelf stock kernel .... ???
or have anyone tested it yet ???
let me know ....
piku2008 said:
After flashing this kernel my neo v gets rooted on .62 stock ROM ....
but will this rooted ROM work if i change the kernel to something else like nightelf stock kernel .... ???
or have anyone tested it yet ???
let me know ....
Click to expand...
Click to collapse
Root privileges are integrated in this kernel.So you will not stay rooted almost for sure, if you flash another kernel which is not prerooted...
bbooff said:
Root privileges are integrated in this kernel.So you will not stay rooted almost for sure, if you flash another kernel which is not prerooted...
Click to expand...
Click to collapse
But unfortunately i gave it a try and changed it to nightelf stock kernel 9_0 & rooting is still working ......
piku2008 said:
But unfortunately i gave it a try and changed it to nightelf stock kernel 9_0 & rooting is still working ......
Click to expand...
Click to collapse
Nightelf stock kernel 9_0 is prerooted too...
Thanks this post . I am get root privileges on my neo v. I want to ask , Can i upgrade to android 4.0 official using Sony PC Companion. If android 4.0 is available to update . It can errror or not ?
quachvidat said:
Thanks this post . I am get root privileges on my neo v. I want to ask , Can i upgrade to android 4.0 official using Sony PC Companion. If android 4.0 is available to update . It can errror or not ?
Click to expand...
Click to collapse
You will be able to update normally to ICS using PC companion, but to be ablolutely sure, you better relock your bootloader before the update...
@bbooff: few days ago I flashed ICS beta from sony page, and I used your kernel for hot boot just so I can install zip with superuser stuff.
Today I flashed stock .62fw, and wanted to hot boot with your kernel, but no luck, I needed to flash it in order to boot into CWM.
You got any idea why id did cooperate on ICS and not on clean .62
Also I couldn't do factory reset while I was using your kernel. I guess that is kinda normal as it's not stock kernel, but still I thought it should work
Madfysh said:
@bbooff: few days ago I flashed ICS beta from sony page, and I used your kernel for hot boot just so I can install zip with superuser stuff.
Today I flashed stock .62fw, and wanted to hot boot with your kernel, but no luck, I needed to flash it in order to boot into CWM.
You got any idea why id did cooperate on ICS and not on clean .62
Also I couldn't do factory reset while I was using your kernel. I guess that is kinda normal as it's not stock kernel, but still I thought it should work
Click to expand...
Click to collapse
I have no idea!
The opposite is what should had happened.
I think that if you reinstall 0.62 (using flashtool and not wotan) and then my kernel, everything will be o.k.
If you install a custom kernel, you can do a factory reset through the cwm menu.
bbooff said:
I have no idea!
The opposite is what should had happened.
I think that if you reinstall 0.62 (using flashtool and not wotan) and then my kernel, everything will be o.k.
Click to expand...
Click to collapse
Actually I did used flashtool.
After I flash your kernel I can enter cwm. problem is if I try hot boot it.
and about factory reset, I know we can do it via recovery, but is it normal that we can't do it from phone?
Madfysh said:
Actually I did used flashtool.
After I flash your kernel I can enter cwm. problem is if I try hot boot it.
and about factory reset, I know we can do it via recovery, but is it normal that we can't do it from phone?
Click to expand...
Click to collapse
What exactly do you mean by "hot boot"?
It is normal that you can't do it.
bbooff said:
What exactly do you mean by "hot boot"?
Click to expand...
Click to collapse
fastboot boot boot.img
it allows you to boot with kernel without flashing it.
your kernel is very good.... simple and easy... helped me restore my phone back...
But now i am facing one more problem...
whenever I try to install any other kernel through fastboot, that kernel does not work; instead your kernel starts booting up...
Can you please throw some light on it?
Thnx
Hi,
I tried installing the ROM from http://forum.xda-developers.com/showthread.php?t=1514050 but im stuck at the boot screen when the SONY Logo comes, stuck for 5 hours now. tried more than 10 times with complete wipe, cache everything that is available in CWM but unable to get past the boot screen, can someone help me?
I'm able to upadte my system with this link
4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11
http://forum.xda-developers.com/showthread.php?t=1446308
but unable to update to Team Xperia SE.TWEAKED V1..
Plz helpp....
What kernel you using has to be custom not stock
Sent from my LT15i using XDA
I tried your case many time...try just wipe data/factory reset
Find me at Gtalk
Sent from my fast Neo V
Sorry for my bad English...
Just download compatible night elf or other kernel. Flash it in fastboot and reboot.
There is nothing wrong with ROM no need to keep wiping it.
I'm not sure which kernel my neo is having as i have tried various things in last one month. How do i find it out (Sorry i'm a beginner here)
kormatoes said:
What kernel you using has to be custom not stock
Sent from my LT15i using XDA
Click to expand...
Click to collapse
I tried that also, still stuck...
wilsonchuchu said:
I tried your case many time...try just wipe data/factory reset
Find me at Gtalk
Sent from my fast Neo V
Sorry for my bad English...
Click to expand...
Click to collapse
Thanks, will try this.
ksavai said:
Just download compatible night elf or other kernel. Flash it in fastboot and reboot.
There is nothing wrong with ROM no need to keep wiping it.
Click to expand...
Click to collapse
ankurvij said:
I'm not sure which kernel my neo is having as i have tried various things in last one month. How do i find it out (Sorry i'm a beginner here)
Click to expand...
Click to collapse
Generally it is in about phone in settings but as you are not able to load up any ROM i suggest just flash one to make sure you are on right kernel.
ksavai said:
Generally it is in about phone in settings but as you are not able to load up any ROM i suggest just flash one to make sure you are on right kernel.
Click to expand...
Click to collapse
Android Version 2.3.4
Baseband -56
Kernel - 2.6.32.9-perf [email protected] #1
Build 62
Hope this is sufficient.
to my knowledge it is for unlocked bootloader only
ankurvij said:
Hi,
I tried installing the ROM from http://forum.xda-developers.com/showthread.php?t=1514050 but im stuck at the boot screen when the SONY Logo comes, stuck for 5 hours now. tried more than 10 times with complete wipe, cache everything that is available in CWM but unable to get past the boot screen, can someone help me?
I'm able to upadte my system with this link
4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11
http://forum.xda-developers.com/showthread.php?t=1446308
but unable to update to Team Xperia SE.TWEAKED V1..
Plz helpp....
Click to expand...
Click to collapse
hi ankurvij,
by which method you root your neo v if it is DoomLoRD's toolkit then it roots your phone with locked bootloader
to my knowledge Team Xperia SE.TWEAKED V1 is for unlocked bootloader only correct me if i'm wrong
you won't install custom ROM but can install Stock ROM
i've tried the same thing after rooting DoomLoRD's toolkit same error as yours
now on stock firmware from emannxperia with some tweaks
http://forum.xda-developers.com/showthread.php?t=1544273
I had similar problems when I put a rom with an inappropriate kernel. But for this you must have the bootloader open
Yes, i used DoomLoRD's toolkit .. i will give a try to ICS Now
Thanks for ur reply..
jtushar53 said:
hi ankurvij,
by which method you root your neo v if it is DoomLoRD's toolkit then it roots your phone with locked bootloader
to my knowledge Team Xperia SE.TWEAKED V1 is for unlocked bootloader only correct me if i'm wrong
you won't install custom ROM but can install Stock ROM
i've tried the same thing after rooting DoomLoRD's toolkit same error as yours
now on stock firmware from emannxperia with some tweaks
http://forum.xda-developers.com/showthread.php?t=1544273
Click to expand...
Click to collapse
Hello again.
I tried to reinstall my phone, so I used Rage Kernel and this ROM, but when I turn on the phone, it shows first Sony logo, then Sony Ericsson logo and it's all, then it restarts.
I will be very glad for every help. Thanks
tdolejs said:
Hello again.
I tried to reinstall my phone, so I used Rage Kernel and this ROM, but when I turn on the phone, it shows first Sony logo, then Sony Ericsson logo and it's all, then it restarts.
I will be very glad for every help. Thanks
try reinstalling again..in the CWM..do this steps.
wipe data/factory reset
wipe only your cache and dalvik-cache
go to mounts and storage -format system.
install zip from sd -choose the zip.
u have to install rage GB kernel from flashtool..
Click to expand...
Click to collapse
What ver of kernel u have been install to ur, i think ur wrong ver maybe ur have install wtong kernel that why ur phone does"nt boot
Sent from my ST15i using xda premium
tdolejs said:
Hello again.
I tried to reinstall my phone, so I used Rage Kernel and this ROM, but when I turn on the phone, it shows first Sony logo, then Sony Ericsson logo and it's all, then it restarts.
I will be very glad for every help. Thanks
Click to expand...
Click to collapse
If the sony logo is showing then chances are that your kernel has not been replaced. Upon a successful kernel replacement the logo which comes on the splash screen is usually the one the developer has made for the kernel. Try reinstalling the kernel or try using a new one. Also make sure you are installing the kernel correctly. Flashtool is a very simple and effective way if doing the same.
with kernel you have to install custom rom other wise your device will keep restarting and also after flashing kernel try factory reset and cache wipe in cwm and then flash the rom
tdolejs said:
Hello again.
I tried to reinstall my phone, so I used Rage Kernel and this ROM, but when I turn on the phone, it shows first Sony logo, then Sony Ericsson logo and it's all, then it restarts.
I will be very glad for every help. Thanks
Click to expand...
Click to collapse
Please tell me what firmware is your phone right now??? remember firmware is important before you start flashing....you cannot flash Custom ICS Rom while you phone is using GB...it will brick your phone....
CircuitBug said:
If the sony logo is showing then chances are that your kernel has not been replaced. Upon a successful kernel replacement the logo which comes on the splash screen is usually the one the developer has made for the kernel. Try reinstalling the kernel or try using a new one. Also make sure you are installing the kernel correctly. Flashtool is a very simple and effective way if doing the same.
Click to expand...
Click to collapse
As far as i know when Sony Logo appear, that show that you are on ICS Rom...Since He said that the Sony Ericsson logo appear next i believe he flash Custom ICS Rom into GB cause if ICS, after Sony Logo it must be Xperia (bootanimation)....Rage And KrsH kernel have Sony name on it...Mesa kernel has Sony Ericsson name on it...
usman_fareed said:
with kernel you have to install custom rom other wise your device will keep restarting and also after flashing kernel try factory reset and cache wipe in cwm and then flash the rom
Click to expand...
Click to collapse
You can use custom kernel on Stock Rom....i have use Rage Kernel, KrsH Kernel and Mesa Kernel on my stock ICS Rom...never got any problem with it....
is it possible to flash the KrsH Kernel v3 ICS on the stockrom GB ?
Or do i have to update GB to ICS fist with SEUS.
THX
duke4you said:
is it possible to flash the KrsH Kernel v3 ICS on the stockrom GB ?
Or do i have to update GB to ICS fist with SEUS.
THX
Click to expand...
Click to collapse
Not Possible....you need to upgrade to ICS before you can use KrsH kernel v3....
Pusak Gaoq said:
Not Possible....you need to upgrade to ICS before you can use KrsH kernel v3....
Click to expand...
Click to collapse
THX
duke4you said:
THX
Click to expand...
Click to collapse
←←←← The Thank Button Is Right There
tdolejs said:
Hello again.
I tried to reinstall my phone, so I used Rage Kernel and this ROM, but when I turn on the phone, it shows first Sony logo, then Sony Ericsson logo and it's all, then it restarts.
I will be very glad for every help. Thanks
Click to expand...
Click to collapse
While flashing the ROM, did you selected "Exclude Kernel" in Flashtool?
my device-xperia neo v
i have unlocked bootloader and rooted it successfully.
then i installed cm9 from their official site. it worked fine.i had been using it for 4 months.
but when i try to install any other rom(i tried ice-cream pureness,cm10,etc) i always get a black screen after reboot(for cm10 it stuck at the logo which was flickering in a wierd way though ).
m really bored with cm9.hlp:laugh::laugh:.
Did you flash the right kernel for the ROMs you have installed?
Did you do a full wipe?
fifo171 said:
Did you flash the right kernel for the ROMs you have installed?
Did you do a full wipe?
Click to expand...
Click to collapse
ya...i did a full wipe..but didnt check the kernel.
i read the instructions again and i missed a step.
now that i read it...i dont get it(m noob in this)
the step is-Flash 4.1.B.0.587 ftf using flashtool
i installed a flashtool-emma but it didnt support my cell.then i installed another flashtool named 'FLASHTOOL'...but i get this(see screenshot).
THANX in advance :laugh::
I think you forgot the screenshot
fifo171 said:
I think you forgot the screenshot
Click to expand...
Click to collapse
oh sorry..my bad.
i solved the problem n now i have stock kernel. thanks for ur help