Related
hi... this post is for those who wants to root the mytouch quickly and easily without even using a computer. these directions will be step by step, because i know how frustrating it is when someone gives a broken step expecting you to fill in the blanks.
note
im not responsible for what happens to your phone. i am simply showing you hope when all else fails. now lets get started.
ALL CREDIT GOES TO CLOCKWORK FOR HIS UNBELIEVABLE CONTRIBUTION TO THE ANDROID COMMUNITY. THANK YOU
first things first, you need a mytouch slide, your phone charging, rom manager free from the android market, universal androot which i will post the link below, and finally a custom rom from xda developers. pick anyone you like preferably cyanogen mod.
step 1. take the custom rom you downloaded from either your pc or from your phone: pc-> if you downloaded it off your pc, then you need to connect your phone to your pc and put the custom rom file on the root of your sd. you dont have to rename it, just leave as is. phone-> if you downloaded it off your phone, then i hope you heard of astro file manager from the market?! you need that to explore your sd card from your phone and find the custom rom on your downloads folder, and edit, move, to the root of your sd card. then paste.
step 2. now you need to get the universal androot apk from the link below. once you download it, make sure you put it anywhere on your phones sd card. once it's there, use astro once more to find that apk on your sd card and install it by clicking on it.
step 3 now all you need is rom manager free from the android market. i hope that you know how to find and install it.
now that you are all situated, the real part begins, and i will also explain why we are doing it this way along the process okay.
step 4 open up the universal androot apk on your phone and it should look pretty simple. the only thing you do here is make sure that root temporary(unroot after reboot) is checked. then hit root . you should get a sucess and the superuser apk showing up in your app drawer. if yes then proceed to step 5.
step 5 now that you have temporary root, this will give you permission to use root apks until reboot. luckily i found out that rom manager has the ability to flash clockwork recovery while your phone is still on. well this is what your going to do. open up rom manager, and the very top option is "flash Clockwork Recovery" hit this and it should install it. after that click on "install rom from sd card." find your custom rom that you put on here from before, and click on it, then check both boxes: backup existing rom, and wipe data and cache, and hit ok. now hit ok to go into recovery. if you get a superuser request at this point then congratulations, its working. allow it , and proceed to step 6 .
step 6 now your phone is restarting and should back up the system and start installing the custom rom. if for some reason it doesnt install right there, and takes you to clockwork recovery(blue words), then go to step 7. if not then step 8
step 7 if you are in clockwork recovery and dont know what the heck youre at, well in short, your at a screen where your allowed to install any rom meant for the mytouch slide including the 2.2 froyo. yay! navigation is simple if you know how. volume buttons are for navigation up and down, and the camera button on the right bottom is for selecting, while the power button at the top of the phone is to go back one. got it ? all you want to do is intall your custom rom if you havent yet. you might first want to do the wipe data/ factory reset, to make sure everything goes smoothly on your new rom. after that go back to the screen with all the options, and go to install zip for sdcard. then it is important to choose zip from sdcard, as i have no idea what the apply sdcard:update.zip will do to your phone. after you click choose update, you should be in a familiar area: your sdcard. find your custom rom and install it. it will work if its a complete and compatible rom for your phone. once done hit reboot system now and presto step 8.
step 8 ur done lol. enjoy your new rom. misc. if you ever want to go back into clockwork recovery, then go into your normal recovery by power + volume down while your phone is turned off. then hit recovery option. youll notice that you are at the normal recovery. push power+volume up for new set of options. theres an option call apply zip update. click on the and boom, you should pop up in clockwork recovery.
universal androot since i am a new user, i cannot post links but here is an attachment, and if your not signed in then you will find the program by going to 4shared.com and searching for UniversalAndroot-1.6.2-beta.apk uploaded by chrisjcj27. thanks and good luck
chrisjcj27 said:
hi... this post is for those who wants to root the mytouch quickly and easily without even using a computer. these directions will be step by step, because i know how frustrating it is when someone gives a broken step expecting you to fill in the blanks.
note
im not responsible for what happens to your phone. i am simply showing you hope when all else fails. now lets get started.
ALL CREDIT GOES TO CLOCKWORK FOR HIS UNBELIEVABLE CONTRIBUTION TO THE ANDROID COMMUNITY. THANK YOU
first things first, you need a mytouch slide, your phone charging, rom manager free from the android market, universal androot which i will post the link below, and finally a custom rom from xda developers. pick anyone you like preferably cyanogen mod.
step 1. take the custom rom you downloaded from either your pc or from your phone: pc-> if you downloaded it off your pc, then you need to connect your phone to your pc and put the custom rom file on the root of your sd. you dont have to rename it, just leave as is. phone-> if you downloaded it off your phone, then i hope you heard of astro file manager from the market?! you need that to explore your sd card from your phone and find the custom rom on your downloads folder, and edit, move, to the root of your sd card. then paste.
step 2. now you need to get the universal androot apk from the link below. once you download it, make sure you put it anywhere on your phones sd card. once it's there, use astro once more to find that apk on your sd card and install it by clicking on it.
step 3 now all you need is rom manager free from the android market. i hope that you know how to find and install it.
now that you are all situated, the real part begins, and i will also explain why we are doing it this way along the process okay.
step 4 open up the universal androot apk on your phone and it should look pretty simple. the only thing you do here is make sure that root temporary(unroot after reboot) is checked. then hit root . you should get a sucess and the superuser apk showing up in your app drawer. if yes then proceed to step 5.
step 5 now that you have temporary root, this will give you permission to use root apks until reboot. luckily i found out that rom manager has the ability to flash clockwork recovery while your phone is still on. well this is what your going to do. open up rom manager, and the very top option is "flash Clockwork Recovery" hit this and it should install it. after that click on "install rom from sd card." find your custom rom that you put on here from before, and click on it, then check both boxes: backup existing rom, and wipe data and cache, and hit ok. now hit ok to go into recovery. if you get a superuser request at this point then congratulations, its working. allow it , and proceed to step 6 .
step 6 now your phone is restarting and should back up the system and start installing the custom rom. if for some reason it doesnt install right there, and takes you to clockwork recovery(blue words), then go to step 7. if not then step 8
step 7 if you are in clockwork recovery and dont know what the heck youre at, well in short, your at a screen where your allowed to install any rom meant for the mytouch slide including the 2.2 froyo. yay! navigation is simple if you know how. volume buttons are for navigation up and down, and the camera button on the right bottom is for selecting, while the power button at the top of the phone is to go back one. got it ? all you want to do is intall your custom rom if you havent yet. you might first want to do the wipe data/ factory reset, to make sure everything goes smoothly on your new rom. after that go back to the screen with all the options, and go to install zip for sdcard. then it is important to choose zip from sdcard, as i have no idea what the apply sdcard:update.zip will do to your phone. after you click choose update, you should be in a familiar area: your sdcard. find your custom rom and install it. it will work if its a complete and compatible rom for your phone. once done hit reboot system now and presto step 8.
step 8 ur done lol. enjoy your new rom. misc. if you ever want to go back into clockwork recovery, then go into your normal recovery by power + volume down while your phone is turned off. then hit recovery option. youll notice that you are at the normal recovery. push power+volume up for new set of options. theres an option call apply zip update. click on the and boom, you should pop up in clockwork recovery.
universal androot since i am a new user, i cannot post links but here is an attachment, and if your not signed in then you will find the program by going to 4shared.com and searching for UniversalAndroot-1.6.2-beta.apk uploaded by chrisjcj27. thanks and good luck
Click to expand...
Click to collapse
Wow, I really hope this works. This is impressive. I think I'm gonna try this in a few. Thanks.
sent from Mytouch Slide 3g using XDA App
www.GoTeamFriday.com
Followed your steps completely. After i get root and flash CW Recovery, I go to install the custom rom and make a Nandroid backup.........it restarts phone and take me to the phone with a question mark (i think thats what it was) and then reboots normally into the stock rom. It says its failing to installl the update package which im assuming is CW Recovery.
CaseyG said:
Followed your steps completely. After i get root and flash CW Recovery, I go to install the custom rom and make a Nandroid backup.........it restarts phone and take me to the phone with a question mark (i think thats what it was) and then reboots normally into the stock rom. It says its failing to installl the update package which im assuming is CW Recovery.
Click to expand...
Click to collapse
I get the same exact thing. Maybe there was a step he forgot to mention.
Sent from my T-Mobile myTouch 3G Slide using XDA App
try repeating the steps again. and make sure that everything goes right along the way. the slightest error will make this a no go.
ill go back and re check everything. this worked for me 3 times over. gimme a sec. ill make this work. sorry for the inconvenience oh by the way. can anyone confirm that they have tried this on a mytouch that hasnt recieved the new ota update. this is the only phone i have tested it on. im not sure if it has anything to do with it.
Tried it about 6 times now. Even downloaded terminal to ensure i have root before carrying on. Its not letting the update.zip that Rom Manager installs on the SD card run at all. Its saying its not signed and then it fails?
Androot is only able to give us a temporary root, therefore the bootloader is still locked and it will not allow us to actually get into CW at all. Correct?
chrisjcj27 said:
ill go back and re check everything. this worked for me 3 times over. gimme a sec. ill make this work. sorry for the inconvenience
Click to expand...
Click to collapse
I've tried this about 6 or more times also. I thought it was just me. Thanks though. I appreciate everything.
Sent from my T-Mobile myTouch 3G Slide using XDA App
CaseyG said:
Androot is only able to give us a temporary root, therefore the bootloader is still locked and it will not allow us to actually get into CW at all. Correct?
Click to expand...
Click to collapse
That definitely makes sense.
Sent from my T-Mobile myTouch 3G Slide using XDA App
correct. its only root until you reboot. its only to hopefully get clockwork installed on your device.
chrisjcj27 said:
ill go back and re check everything. this worked for me 3 times over. gimme a sec. ill make this work. sorry for the inconvenience oh by the way. can anyone confirm that they have tried this on a mytouch that hasnt recieved the new ota update. this is the only phone i have tested it on. im not sure if it has anything to do with it.
Click to expand...
Click to collapse
Im trying it on a MT3GS WITH the update installed.....same as you correct?
Not sound rude, but who doesn't have that update by now? So you're saying that we would need to revert from the current update then this should work?
Sent from my T-Mobile myTouch 3G Slide using XDA App
humm im thinking screw this lol
terrelltp said:
humm im thinking screw this lol
Click to expand...
Click to collapse
you're having the same issue?
Sent from my T-Mobile myTouch 3G Slide using XDA App
This will not work. You're missing the ENG bootloader.
chrisjcj27 said:
ill go back and re check everything. this worked for me 3 times over. gimme a sec. ill make this work. sorry for the inconvenience oh by the way. can anyone confirm that they have tried this on a mytouch that hasnt recieved the new ota update. this is the only phone i have tested it on. im not sure if it has anything to do with it.
Click to expand...
Click to collapse
Did you go back and recheck?
Sent from my T-Mobile myTouch 3G Slide using XDA App
migueltherocker said:
This will not work. You're missing the ENG bootloader.
Click to expand...
Click to collapse
What's the eng boatloader? Once we have it, will it work?
Sent from my T-Mobile myTouch 3G Slide using XDA App
OuncE718 said:
What's the eng boatloader? Once we have it, will it work?
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
Read through the working root method here.
This method was developed by ChiefzReloaded, a dev we all know and love. He knows his stuff.
The one posted in this thread seems easier, but simply will not work.
migueltherocker said:
Read through the working root method here.
This method was developed by ChiefzReloaded, a dev we all know and love. He knows his stuff.
The one posted in this thread seems easier, but simply will not work.
Click to expand...
Click to collapse
So is it possible that we can use this method with eng bootloader added?
Sent from my T-Mobile myTouch 3G Slide using XDA App
Hi guys, I was trying to flash new ROM via CWM. However, cwm wasn't able to read the zip file saying something about script is not supported blah blah blah... Browsing thru xda forum, I found out that this problem has caused due to the cwm version(recently updated to cwm3.0.0.8) , or at least I want to believe it this way. So lastnight I ended up finding a thread started by jt1134 which I basically helped out lots of ppl who were struggling with similar problem as mine. But the thing is when I was trying to download the files, cwm-recovery-ALL.zip and cwm-recovery-ALL odin. The download links were broken giving me an error message. So guys, if anyone has the files I beg of you to share it pleaseeeeeeeee.
to shorten it down, the link is broken, I think. So if anyone has the files I beg of you to share it thank you..............
Hello jjalhjy
I will make this easy for the both of us!
Direct your browser to this link:http://forum.xda-developers.com/showthread.php?t=999802
Once there scroll down to the 5th post (#5) where I linked both the page you referenced (broken links) and a link to a working download of the ".tar" file (was earlier! ).
If you need the .zip file scroll down to post 9 (#9) where I have linked it.
A quick guide to getting you flashed.
*note* I am assuming you cannot use .zip files due to the incompatible script error! This is for using odin.
1. Put phone in download mode via the power menu if on superclean. If not turn off the power, pull battery, plug into computer, hold "down" on the volume rocker till the yellow triangle "download" screen appears
2. download the ".tar" version of cwr all
3. Launch odin
4. Click the PDA button and search for the ".tar" file and select it -> then hit "ok"
5. Run the file in odin, wait for the phone to reboot.
6. put your battery back in and test recovery mode to see how it looks!
*whew*
good luck!
Wow that was a fast reply! Thank you! A quick question tho, 1. Do you know if I have to uninstall ROMmanager and delete update.zip file in my sd card before I even start flashing via using odin. 2. After following your instruction step by step, and let's say if it works. Do I still need to download ROMmanager? 3. I remember reading someone's thread in xda saying it is always necessary to flash new cwm after flashing a ROM (I always have it done using ROMmanager but now things have changed, obvisouly. So yea, how would I flash new CWM after flashing a ROM from now?
Sorry if these questions sound so newbyyyy hehe and thanks again!
jjalhjy said:
1. Do you know if I have to uninstall ROMmanager and delete update.zip file in my sd card before I even start flashing via using odin.
Click to expand...
Click to collapse
It is advised (so I have read) that you should not use ROM manager with the Fascinate. While it is a powerful tool, it is just not 100% Fascinate friendly yet. Also I have never had to remove/mess with the update.zip on my SD card. Heck as far as I know you can delete it after using ODIN with the new cwr-all.
jjalhjy said:
2. After following your instruction step by step, and let's say if it works. Do I still need to download ROMmanager?
Click to expand...
Click to collapse
No. I would use the Development Thread here in the fascinate section for your ROMS. ROM manager is just not made for us.....yet!
jjalhjy said:
3. I remember reading someone's thread in xda saying it is always necessary to flash new cwm after flashing a ROM (I always have it done using ROMmanager but now things have changed, obvisouly. So yea, how would I flash new CWM after flashing a ROM from now?
Click to expand...
Click to collapse
I personally have never done this. To the best of my knowledge (and real life experience) cwr-all (red version) is the current and most up-to-date version (for the Fascinate). Once I ODIN-ed over the cwr-all I have not updated it once. You should be fine to flash it and flash ROMs as you please!
Dude, thanks A LOTTTTTT
Hello Fellow XDA'ers
Today i started rooting my SGS II with CF-TOOL for XWKK2 and that worked. secondly i tried to add a theme from here : http://forum.xda-developers.com/showthread.php?t=1131746 so i installed it by recovery mode. i started up my phone again and it says cant load TW.Launcher.Connect or something. I was like oh. so i tried to put on a new theme from http://forum.xda-developers.com/showthread.php?t=1154278 and now it sticks on this screen: http://www.google.nl/imgres?q=how+to+see+galaxy+s2+root+check&start=406&um=1&hl=nl&sa=N&tbm=isch&tbnid=LrkiHyngL3wLOM:&imgrefurl=http://www.elakiri.lk/forum/showthread.php%3Ft%3D1217605&docid=syBKpqoQsy7huM&imgurl=http://recenthottestnews.info/wp-content/plugins/RSSPoster_PRO/cache/d8dfa_rootingsgs5.jpg&w=620&h=465&ei=UqUZT7buH8Gh-QauvbWhCg&zoom=1&chk=sbg&iact=rc&dur=1721&sig=108334096676297027967&page=12&tbnh=179&tbnw=210&ndsp=37&ved=1t:429,r:8,s:406&tx=67&ty=66&biw=1647&bih=928
i was hoping if someone here with more brains than me could help me,
thanks in advance.
Kay
The first link modifies a whole heap of files, and the second one modifies far less files but also doesn't have a version for stock (odexed) KK2. What did you flash from the second one?
Anyway, what I'm trying to get at is that they're not really comparable.
Easiest way to get back to a working state is to reflash your ROM or restore a nandroid backup if you took one. Messing around with trying to undo whatever you did might take a while.
Well i tried to install the theme throught recovery mode and now it stops there however i can get in download mode and recovery mode. I hope you got some more information for me so i can fix this
thanks for replying anyway
Kay
Kay Wigger said:
Hello Fellow XDA'ers
Today i started rooting my SGS II with CF-TOOL for XWKK2 and that worked. secondly i tried to add a theme from here : http://forum.xda-developers.com/showthread.php?t=1131746 so i installed it by recovery mode. i started up my phone again and it says cant load TW.Launcher.Connect or something. I was like oh. so i tried to put on a new theme from http://forum.xda-developers.com/showthread.php?t=1154278 and now it sticks on this screen: http://www.google.nl/imgres?q=how+to+see+galaxy+s2+root+check&start=406&um=1&hl=nl&sa=N&tbm=isch&tbnid=LrkiHyngL3wLOM:&imgrefurl=http://www.elakiri.lk/forum/showthread.php%3Ft%3D1217605&docid=syBKpqoQsy7huM&imgurl=http://recenthottestnews.info/wp-content/plugins/RSSPoster_PRO/cache/d8dfa_rootingsgs5.jpg&w=620&h=465&ei=UqUZT7buH8Gh-QauvbWhCg&zoom=1&chk=sbg&iact=rc&dur=1721&sig=108334096676297027967&page=12&tbnh=179&tbnw=210&ndsp=37&ved=1t:429,r:8,s:406&tx=67&ty=66&biw=1647&bih=928
i was hoping if someone here with more brains than me could help me,
thanks in advance.
Kay
Click to expand...
Click to collapse
1) With rooting u also on stock firmware and not on Rom, which for theme is
2) Ur second link is for JKay Deluxe and this isn't a theme like u think, it's a modification tool for notificationbar, lockscreen and Power-off menu.
3) This screen is the normal bootscreen after flash (sign because not originally firmware [root])
I don't know how long u wait, but after flashing the JKay .zip it's normal that boot take some time (up to 3 min).
If u already wait so long an didn't boot u have to choices:
1) Flash original firmware again.
Search here and flash this like root via odin (READ INSTRUCTION!):
http://forum.xda-developers.com/showthread.php?t=1075278
2) Because cf-root u should have the CWM (ClockWorkMod).
- Go into Recovery Menu (Press Vol- ; Home and the Powerbutton 'til Logo like in third link appears)
- Then Choose Factory reset and after this make a reboot
If system isn't crashed in all u should get it work again, if not u have to choose point one.
If works u can choose a rom from here (like one u see in my signature), copy file on sd card and flash it via CWM (Go again in CWM and then "choose .zip from internal sd card">"flash .zip from internal sd card">then select .zip)
Much success. If anything unclear just let me know...
CHEERS
Kay Wigger said:
I hope you got some more information for me so i can fix this
thanks for replying anyway
Click to expand...
Click to collapse
Why would I give you more information? I told you everything you need to know.
Well sinds i cant connect through USB i'll go for number one i am downloading the xwkk2 official sinds i had that one before i started rooting. lets hope it works..
thanks for replying.
Kay
Kay Wigger said:
Well sinds i cant connect through USB i'll go for number one i am downloading the xwkk2 official sinds i had that one before i started rooting. lets hope it works..
thanks for replying.
Kay
Click to expand...
Click to collapse
the above poster told you exactly what to do. if you have a backup rom just go into recovery and revert back to that and problem solved. no more to it. no need for any extra info but anyway if you say you have found a way good luck my friend
Hello all
I have searched all over but have not found any similar problems.
I rooted my phone and installed CWM and would like to install a custom rom that exists for Gingerbread 2.3.6 (I flashed back to stock OS), I have found the rom that I seem to like a lot (Atomic rom) however when I put the .zip file into my external sd and use rom manager to install the rom it turns off, then the phone boots back up... Any ideas about what is happening? Maybe I do not have everything rom manager needs?
I am definitely not ready to flash the new rom using odin, unless you put the .zip file into PDA section and hit "Start" when the phone is in download mode... from the forums I read it is not as easy as installing the stock OS
Thanks in advance!
HeyLookItsKarl said:
Hello all
I have searched all over but have not found any similar problems.
I rooted my phone and installed CWM and would like to install a custom rom that exists for Gingerbread 2.3.6 (I flashed back to stock OS), I have found the rom that I seem to like a lot (Atomic rom) however when I put the .zip file into my external sd and use rom manager to install the rom it turns off, then the phone boots back up... Any ideas about what is happening? Maybe I do not have everything rom manager needs?
I am definitely not ready to flash the new rom using odin, unless you put the .zip file into PDA section and hit "Start" when the phone is in download mode... from the forums I read it is not as easy as installing the stock OS
Thanks in advance!
Click to expand...
Click to collapse
you leave so many questions unanswered here. you have provided some information here, but not the vital info and the last part is very confusing.
im sorry, I know you are new here, but you lead me to ask some very generic questions....................
are you in the right forum for the right phone? this is for the Note1
I only ask this because I cant even find any GB ROMS for this phone. the Note 1 has been updated to official JB. I would and I am sure you would hate to flash wrong files to wrong phone and wind up with a BRICK.
I am not trying to make it sound as if you don't even know what phone you have, but you would not be the first to flash wrong and kill your phone.
may I suggest you read up in the "Super Everything Thread", which is in the General Forum. you will find exactly that, EVERYTHING, there. Odin is no big deal and super easy to use. also most don't even use CWM or ROM MANAGER anymore. TWRP is now the RECOVERY of choice and much more user friendly.
there are also many YOUTUBE tutorals that can walk you through. but first, lets make sure you are in the right place.
your phone is a ???????? NOTE 1
you carrier is ?????? att, tmo, ver, sprint
it is presently running ??????? GB, ICS, JB
good luck and let us know if we help
Saurom!!!!!!! ¡¡¡¡¡¡!!!!!!! I is a custom gb rom for our i717 note
2§HAYNE
shayneflashindaily said:
Saurom!!!!!!! ¡¡¡¡¡¡!!!!!!! I is a custom gb rom for our i717 note
2§HAYNE
Click to expand...
Click to collapse
SAUROM !!!!
captemo said:
you leave so many questions unanswered here. you have provided some information here, but not the vital info and the last part is very confusing.
im sorry, I know you are new here, but you lead me to ask some very generic questions....................
are you in the right forum for the right phone? this is for the Note1
I only ask this because I cant even find any GB ROMS for this phone. the Note 1 has been updated to official JB. I would and I am sure you would hate to flash wrong files to wrong phone and wind up with a BRICK.
I am not trying to make it sound as if you don't even know what phone you have, but you would not be the first to flash wrong and kill your phone.
may I suggest you read up in the "Super Everything Thread", which is in the General Forum. you will find exactly that, EVERYTHING, there. Odin is no big deal and super easy to use. also most don't even use CWM or ROM MANAGER anymore. TWRP is now the RECOVERY of choice and much more user friendly.
there are also many YOUTUBE tutorals that can walk you through. but first, lets make sure you are in the right place.
your phone is a ???????? NOTE 1
you carrier is ?????? att, tmo, ver, sprint
it is presently running ??????? GB, ICS, JB
good luck and let us know if we help
Click to expand...
Click to collapse
Sorry about that... I have the Samsung Galaxy Note i717 for AT&T and I am running Gingerbread 2.3.6
I thought that if a rom could run on GB it could run on any phone that has GB but your response has lead me to know that it also depends on what phone I'm running, so thanks!
I'll go and double check to see if the rom I tried to install was for the note... I guess I'm lucky I didn't brick my phone when I tried flashing the other 2 rome xD... Gonna count my blessings tonight lol
HeyLookItsKarl said:
Sorry about that... I have the Samsung Galaxy Note i717 for AT&T and I am running Gingerbread 2.3.6
I thought that if a rom could run on GB it could run on any phone that has GB but your response has lead me to know that it also depends on what phone I'm running, so thanks!
I'll go and double check to see if the rom I tried to install was for the note... I guess I'm lucky I didn't brick my phone when I tried flashing the other 2 rome xD... Gonna count my blessings tonight lol
Click to expand...
Click to collapse
don't need to apologize to me for anything. the more information the better. not only are there so many phones out there, there are variations of those phones that have gotten people in trouble.
you have the North American version
International version
Korean version
different internals and wont all take same ROM. just be careful my friend.
shayneflashindaily said:
Saurom!!!!!!! ¡¡¡¡¡¡!!!!!!! I is a custom gb rom for our i717 note
2§HAYNE
Click to expand...
Click to collapse
I am looking into this rom, looks pretty interesting. Flashing the "AT&T fix" though, do I put that on my SD card also?
Update: For some reason I can not install rome
I am not sure what I am doing wrong because I have Rom manager do everything when I put the .zip file on my SD card and the phone restarts like normal, I even tried doing it manually in cwm recovery. I have no idea what I am doing wrong. And this rom I know for sure is meant for GB and the i717.
Any suggestions? Thanks again
You mean it's a gb rom meant for the i717 galaxy note....... I think you may be a little mixed up on what a rom is and what your actually doing...... Explain in detail what exact steps your doing when your flashing the rom so someone can help you.
2§HAYNE
shayneflashindaily said:
You mean it's a gb rom meant for the i717 galaxy note....... I think you may be a little mixed up on what a rom is and what your actually doing...... Explain in detail what exact steps your doing when your flashing the rom so someone can help you.
2§HAYNE
Click to expand...
Click to collapse
I appreciate your patience
Step 1: I put the downloaded .zip rom (saurom) into my external sd card in a special folder I named Roms
Step 2: I fire up Rom manager and go to "Install ROM from SD Card"
Step 3: Go to folder containing the Saurom .zip file and select it
Step 4: Make sure "Backup Existing Rom" and "Wipe Data and Cache" are selected
Step 5: Hit "Reboot And Install"
The phone will then turn off and restart like normal, I check but the rom did not install. I honestly have no idea how I'm screwing up lol
Do you have a custom recovery installed....
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
HeyLookItsKarl said:
I appreciate your patience
Step 1: I put the downloaded .zip rom (saurom) into my external sd card in a special folder I named Roms
Step 2: I fire up Rom manager and go to "Install ROM from SD Card"
Step 3: Go to folder containing the Saurom .zip file and select it
Step 4: Make sure "Backup Existing Rom" and "Wipe Data and Cache" are selected
Step 5: Hit "Reboot And Install"
The phone will then turn off and restart like normal, I check but the rom did not install. I honestly have no idea how I'm screwing up lol
Click to expand...
Click to collapse
You have to understand this as well, the ROMS do not install in conjunction or within the current Stock ROM. They replace them. So as stated above you have to make sure you have CWM or TWRP installed and boot directly to the custom recovery. Then wipe your data/system/cache/dalvik and after all of that install the ROM of choice.
http://forum.xda-developers.com/showthread.php?t=1525341
The very first thing listed in this topic is how to install Saurom. No where does it say to try and do it through ROM Manager.
Maybe that is where your hiccup is coming from?
No further instructions needed good luck and happy flashing
2§HAYNE
ZacksBuilds said:
Do you have a custom recovery installed....
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Yes
KSoD said:
You have to understand this as well, the ROMS do not install in conjunction or within the current Stock ROM. They replace them. So as stated above you have to make sure you have CWM or TWRP installed and boot directly to the custom recovery. Then wipe your data/system/cache/dalvik and after all of that install the ROM of choice.
http://forum.xda-developers.com/showthread.php?t=1525341
The very first thing listed in this topic is how to install Saurom. No where does it say to try and do it through ROM Manager.
Maybe that is where your hiccup is coming from?
Click to expand...
Click to collapse
Alright so I forgot that I had to wipe the data/system / cache / dalvik
But even when I tried that just now and went into installing the .zip file it said that the installation failed, is it because cwm was removed when I wiped the device?
Update your recovery to twrp 2.6
Sent from my SGH-I717 using xda app-developers app
What would updating the recovery do?
Gets rid of status 7 error that makes it unable to flash.
Sent from my SGH-I717 using xda app-developers app
HeyLookItsKarl said:
Yes
Alright so I forgot that I had to wipe the data/system / cache / dalvik
But even when I tried that just now and went into installing the .zip file it said that the installation failed, is it because cwm was removed when I wiped the device?
Click to expand...
Click to collapse
How do you forget that? That's the whole point besides actually flashing the rom... It's a must.... Smfh
2§HAYNE
ZacksBuilds said:
Gets rid of status 7 error that makes it unable to flash.
Sent from my SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
So could I flash using GooManager?
shayneflashindaily said:
How do you forget that? That's the whole point besides actually flashing the rom... It's a must.... Smfh
2§HAYNE
Click to expand...
Click to collapse
haha, only problem is that the rom hit an error anyways so I'm still lost at what I am doing wrong...
Another question, when I reset all of the settings and stuff before I flash the rom, wouldn't that get rid of titanium back up? then how would I restore my apps and data?
Yes you are right... But first stick your phone in the freezer for 2hrs...then microwave it for 3 mins... It will cause your recovery to reconstruct and see your internal storage enabling developer options to be on... Then hit the rom installer button.
2§HAYNE
---------- Post added at 03:36 AM ---------- Previous post was at 03:33 AM ----------
Disregard last post I put..... Go to super everything thread.....
2§HAYNE
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
riekkir said:
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
Click to expand...
Click to collapse
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
es0tericcha0s said:
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
Click to expand...
Click to collapse
No I don't have it atm as I just wiped the data/cache last night but will I already have CWM, I just need to unlock the bootloader and try again...I'm trying to install this one:
Android 4.4.2 KitKat Mokee Rom, and it says the version is a nightly. Yes I'm positive it's the Bell Version as I purchased it at a Bell Store and my carrier is Bell. The error message is "Installation Aborted." It begins installing, and then halfway through I get that error message. How do I fix this?
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/moto_msm8960
es0tericcha0s said:
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
Click to expand...
Click to collapse
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
riekkir said:
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
Click to expand...
Click to collapse
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
http://forum.xda-developers.com/showthread.php?t=2619489
For installing recovery:
http://forum.xda-developers.com/showthread.php?t=2262726
es0tericcha0s said:
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
For installing recovery:
Click to expand...
Click to collapse
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
riekkir said:
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
Click to expand...
Click to collapse
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
es0tericcha0s said:
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
Click to expand...
Click to collapse
Okay so I'm trying it now and the program won't even open :/
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
es0tericcha0s said:
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
Click to expand...
Click to collapse
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
riekkir said:
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
Click to expand...
Click to collapse
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
es0tericcha0s said:
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
Click to expand...
Click to collapse
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
riekkir said:
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
Click to expand...
Click to collapse
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
es0tericcha0s said:
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
Click to expand...
Click to collapse
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
riekkir said:
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
Click to expand...
Click to collapse
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
es0tericcha0s said:
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
Click to expand...
Click to collapse
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
riekkir said:
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
Click to expand...
Click to collapse
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
es0tericcha0s said:
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
Click to expand...
Click to collapse
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
riekkir said:
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
Click to expand...
Click to collapse
Oh yea, forgot you have to undo the screws on the bottom. So you scroll down to hit recovery and use the Power button to select and it doesn't do anything? That's odd.. Try and reflash the recovery since you can still get to fastboot. If that doesn't work, you're not totally screwed since you can still get to fastboot, that means you should be able to restore it to stock and start over.
Alternatively, if you have fastboot set up, you could make sure that philz touch is in the fastboot folder and use this command:
fastboot boot recovery nameofphilztouchfile.img
If you don't have fastboot, then just grab this one: http://forum.xda-developers.com/showthread.php?t=2317790 , drop the recovery img in that folder and open the CMD prompt on your computer and change directories to it and run the command.