Hello all
I have searched all over but have not found any similar problems.
I rooted my phone and installed CWM and would like to install a custom rom that exists for Gingerbread 2.3.6 (I flashed back to stock OS), I have found the rom that I seem to like a lot (Atomic rom) however when I put the .zip file into my external sd and use rom manager to install the rom it turns off, then the phone boots back up... Any ideas about what is happening? Maybe I do not have everything rom manager needs?
I am definitely not ready to flash the new rom using odin, unless you put the .zip file into PDA section and hit "Start" when the phone is in download mode... from the forums I read it is not as easy as installing the stock OS
Thanks in advance!
HeyLookItsKarl said:
Hello all
I have searched all over but have not found any similar problems.
I rooted my phone and installed CWM and would like to install a custom rom that exists for Gingerbread 2.3.6 (I flashed back to stock OS), I have found the rom that I seem to like a lot (Atomic rom) however when I put the .zip file into my external sd and use rom manager to install the rom it turns off, then the phone boots back up... Any ideas about what is happening? Maybe I do not have everything rom manager needs?
I am definitely not ready to flash the new rom using odin, unless you put the .zip file into PDA section and hit "Start" when the phone is in download mode... from the forums I read it is not as easy as installing the stock OS
Thanks in advance!
Click to expand...
Click to collapse
you leave so many questions unanswered here. you have provided some information here, but not the vital info and the last part is very confusing.
im sorry, I know you are new here, but you lead me to ask some very generic questions....................
are you in the right forum for the right phone? this is for the Note1
I only ask this because I cant even find any GB ROMS for this phone. the Note 1 has been updated to official JB. I would and I am sure you would hate to flash wrong files to wrong phone and wind up with a BRICK.
I am not trying to make it sound as if you don't even know what phone you have, but you would not be the first to flash wrong and kill your phone.
may I suggest you read up in the "Super Everything Thread", which is in the General Forum. you will find exactly that, EVERYTHING, there. Odin is no big deal and super easy to use. also most don't even use CWM or ROM MANAGER anymore. TWRP is now the RECOVERY of choice and much more user friendly.
there are also many YOUTUBE tutorals that can walk you through. but first, lets make sure you are in the right place.
your phone is a ???????? NOTE 1
you carrier is ?????? att, tmo, ver, sprint
it is presently running ??????? GB, ICS, JB
good luck and let us know if we help
Saurom!!!!!!! ¡¡¡¡¡¡!!!!!!! I is a custom gb rom for our i717 note
2§HAYNE
shayneflashindaily said:
Saurom!!!!!!! ¡¡¡¡¡¡!!!!!!! I is a custom gb rom for our i717 note
2§HAYNE
Click to expand...
Click to collapse
SAUROM !!!!
captemo said:
you leave so many questions unanswered here. you have provided some information here, but not the vital info and the last part is very confusing.
im sorry, I know you are new here, but you lead me to ask some very generic questions....................
are you in the right forum for the right phone? this is for the Note1
I only ask this because I cant even find any GB ROMS for this phone. the Note 1 has been updated to official JB. I would and I am sure you would hate to flash wrong files to wrong phone and wind up with a BRICK.
I am not trying to make it sound as if you don't even know what phone you have, but you would not be the first to flash wrong and kill your phone.
may I suggest you read up in the "Super Everything Thread", which is in the General Forum. you will find exactly that, EVERYTHING, there. Odin is no big deal and super easy to use. also most don't even use CWM or ROM MANAGER anymore. TWRP is now the RECOVERY of choice and much more user friendly.
there are also many YOUTUBE tutorals that can walk you through. but first, lets make sure you are in the right place.
your phone is a ???????? NOTE 1
you carrier is ?????? att, tmo, ver, sprint
it is presently running ??????? GB, ICS, JB
good luck and let us know if we help
Click to expand...
Click to collapse
Sorry about that... I have the Samsung Galaxy Note i717 for AT&T and I am running Gingerbread 2.3.6
I thought that if a rom could run on GB it could run on any phone that has GB but your response has lead me to know that it also depends on what phone I'm running, so thanks!
I'll go and double check to see if the rom I tried to install was for the note... I guess I'm lucky I didn't brick my phone when I tried flashing the other 2 rome xD... Gonna count my blessings tonight lol
HeyLookItsKarl said:
Sorry about that... I have the Samsung Galaxy Note i717 for AT&T and I am running Gingerbread 2.3.6
I thought that if a rom could run on GB it could run on any phone that has GB but your response has lead me to know that it also depends on what phone I'm running, so thanks!
I'll go and double check to see if the rom I tried to install was for the note... I guess I'm lucky I didn't brick my phone when I tried flashing the other 2 rome xD... Gonna count my blessings tonight lol
Click to expand...
Click to collapse
don't need to apologize to me for anything. the more information the better. not only are there so many phones out there, there are variations of those phones that have gotten people in trouble.
you have the North American version
International version
Korean version
different internals and wont all take same ROM. just be careful my friend.
shayneflashindaily said:
Saurom!!!!!!! ¡¡¡¡¡¡!!!!!!! I is a custom gb rom for our i717 note
2§HAYNE
Click to expand...
Click to collapse
I am looking into this rom, looks pretty interesting. Flashing the "AT&T fix" though, do I put that on my SD card also?
Update: For some reason I can not install rome
I am not sure what I am doing wrong because I have Rom manager do everything when I put the .zip file on my SD card and the phone restarts like normal, I even tried doing it manually in cwm recovery. I have no idea what I am doing wrong. And this rom I know for sure is meant for GB and the i717.
Any suggestions? Thanks again
You mean it's a gb rom meant for the i717 galaxy note....... I think you may be a little mixed up on what a rom is and what your actually doing...... Explain in detail what exact steps your doing when your flashing the rom so someone can help you.
2§HAYNE
shayneflashindaily said:
You mean it's a gb rom meant for the i717 galaxy note....... I think you may be a little mixed up on what a rom is and what your actually doing...... Explain in detail what exact steps your doing when your flashing the rom so someone can help you.
2§HAYNE
Click to expand...
Click to collapse
I appreciate your patience
Step 1: I put the downloaded .zip rom (saurom) into my external sd card in a special folder I named Roms
Step 2: I fire up Rom manager and go to "Install ROM from SD Card"
Step 3: Go to folder containing the Saurom .zip file and select it
Step 4: Make sure "Backup Existing Rom" and "Wipe Data and Cache" are selected
Step 5: Hit "Reboot And Install"
The phone will then turn off and restart like normal, I check but the rom did not install. I honestly have no idea how I'm screwing up lol
Do you have a custom recovery installed....
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
HeyLookItsKarl said:
I appreciate your patience
Step 1: I put the downloaded .zip rom (saurom) into my external sd card in a special folder I named Roms
Step 2: I fire up Rom manager and go to "Install ROM from SD Card"
Step 3: Go to folder containing the Saurom .zip file and select it
Step 4: Make sure "Backup Existing Rom" and "Wipe Data and Cache" are selected
Step 5: Hit "Reboot And Install"
The phone will then turn off and restart like normal, I check but the rom did not install. I honestly have no idea how I'm screwing up lol
Click to expand...
Click to collapse
You have to understand this as well, the ROMS do not install in conjunction or within the current Stock ROM. They replace them. So as stated above you have to make sure you have CWM or TWRP installed and boot directly to the custom recovery. Then wipe your data/system/cache/dalvik and after all of that install the ROM of choice.
http://forum.xda-developers.com/showthread.php?t=1525341
The very first thing listed in this topic is how to install Saurom. No where does it say to try and do it through ROM Manager.
Maybe that is where your hiccup is coming from?
No further instructions needed good luck and happy flashing
2§HAYNE
ZacksBuilds said:
Do you have a custom recovery installed....
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Yes
KSoD said:
You have to understand this as well, the ROMS do not install in conjunction or within the current Stock ROM. They replace them. So as stated above you have to make sure you have CWM or TWRP installed and boot directly to the custom recovery. Then wipe your data/system/cache/dalvik and after all of that install the ROM of choice.
http://forum.xda-developers.com/showthread.php?t=1525341
The very first thing listed in this topic is how to install Saurom. No where does it say to try and do it through ROM Manager.
Maybe that is where your hiccup is coming from?
Click to expand...
Click to collapse
Alright so I forgot that I had to wipe the data/system / cache / dalvik
But even when I tried that just now and went into installing the .zip file it said that the installation failed, is it because cwm was removed when I wiped the device?
Update your recovery to twrp 2.6
Sent from my SGH-I717 using xda app-developers app
What would updating the recovery do?
Gets rid of status 7 error that makes it unable to flash.
Sent from my SGH-I717 using xda app-developers app
HeyLookItsKarl said:
Yes
Alright so I forgot that I had to wipe the data/system / cache / dalvik
But even when I tried that just now and went into installing the .zip file it said that the installation failed, is it because cwm was removed when I wiped the device?
Click to expand...
Click to collapse
How do you forget that? That's the whole point besides actually flashing the rom... It's a must.... Smfh
2§HAYNE
ZacksBuilds said:
Gets rid of status 7 error that makes it unable to flash.
Sent from my SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
So could I flash using GooManager?
shayneflashindaily said:
How do you forget that? That's the whole point besides actually flashing the rom... It's a must.... Smfh
2§HAYNE
Click to expand...
Click to collapse
haha, only problem is that the rom hit an error anyways so I'm still lost at what I am doing wrong...
Another question, when I reset all of the settings and stuff before I flash the rom, wouldn't that get rid of titanium back up? then how would I restore my apps and data?
Yes you are right... But first stick your phone in the freezer for 2hrs...then microwave it for 3 mins... It will cause your recovery to reconstruct and see your internal storage enabling developer options to be on... Then hit the rom installer button.
2§HAYNE
---------- Post added at 03:36 AM ---------- Previous post was at 03:33 AM ----------
Disregard last post I put..... Go to super everything thread.....
2§HAYNE
Related
Go easy on me guys I tried looking for the answers for the last 3-4 hours. ;/
I already rooted my phone using this guide
http://forum.xda-developers.com/showthread.php?t=1310115
and unlocked the bootloaded as well using the htcdev website.
And I would like to install beastmod. I went through the faq and the whole bit but still have questions and still a tad bit confused. I even went online to google and search the forum.
I know this is the official thread for beast mod
http://forum.xda-developers.com/showthread.php?t=1313017?referrerid=922386
I have unlocked the boot loader, do I need to flash the kernel still? This is where I am confuse.
I read the
"FAQ for the HTC Amaze 4G. Read Frequently Asked Questions before you post a question!"
and
"HTC AMAZE ROM Bible - Everything you need to know"
I'm coming from a Blackberry which I used for almost 6 years.
I'm just kinda stumped right now as far as steps I need to take if any prior to installing Beastmod. I have never installed a rom before but I figure I ask the questions above before attempting anything.
Forgive me if i'm wrong everyone, but i think the Kernel is already cooked into the ROM. So no need for flashing a kernel after flashing the ROM.
I too am new to the HTC Amaze. I'm coming from a Samsung Galaxy S2 and was also running BeastMod v4.0. And God is this a pain in the butt to root. Last HTC phone i had was a HTC TouchPro. WinMo6 ftl
Really? What made you go to the Amaze? I came in T Mobile store thinking I was going to walk out with the S2 but after 3 days I ended up leaving with the Amaze, just seemed like a better phone.
Have you installed beastmod on your phone going?
Oh i still have my SGS2, just got really bored with it dev wise. Too many Roms with pretty much the same things. BeastMod was really the only ROM that stood out. Just got my Amaze last night, so i haven't even been able to try to root it yet. I've been reading alot of tutorials, and it sounds fairly easy....just alot of steps than what i'm used to. But so far, i'm really liking the Amaze over the SGS2. Sense and the camera are a WIN!
As far as I can tell from reading the official BeastMod first post you do need to flash the kernel.
That message below is right in the change log.
"**FULL WIPE REQUIRED FOR v2.2.0 and Kernel Flash**
YES!
You must flash the Kernal with Kernal Flasher
We do not have S-off... Security Off
So Kernals can not be buried in the rom they have to be seperate. We do not anticipate S-off any time soon. Since bootoader is unlocked we can use ADB to push the kernal. VIOLA! for us mere mortals the mighty DEV have created a tool that does it for us!
I just want to help. I find it hard to believe you did not see this in like every Xboarder ROM thread there is! Follow instructions on front page of the ROMs. They are explicit.
Feel free to PM if you have issues though. Amaze is my first Android phone and I cut my teeth with it so I should be a good resource. Cheers
I still do not see that thread, I just looked. I;ve spent a few hours on this but still determined to do it.
nguyendqh said:
As far as I can tell from reading the official BeastMod first post you do need to flash the kernel.
That message below is right in the change log.
"**FULL WIPE REQUIRED FOR v2.2.0 and Kernel Flash**
Click to expand...
Click to collapse
Now thats really confusing. But i guess we'd have to go with what the latest changelog says.
babymatteo said:
Now thats really confusing. But i guess we'd have to go with what the latest changelog says.
Click to expand...
Click to collapse
How do you think I feel?
Alright so fact, need to flash kernel 1st.
Alright I found this
http://forum.xda-developers.com/showthread.php?t=1328141
Which I assume its the correct one.
I am confused at number 4,
4. Place the boot.img that you want to be flashed in the Kernel-Here folder.
Which boot.img? The one thats included in beastmod?
and 5
5. Make sure adb is enabled on your phone via settings
adb?
You always flash the ROM first then the Kernel.
babymatteo said:
You always flash the ROM first then the Kernel.
Click to expand...
Click to collapse
I don't know what you mean by that could you be more specific please?
Do you see on the BeastMod thread where you downloaded the ROM?
Underneath it, it says "Kernel for 2.2.0" that is the boot.img download it.
As for ADB under settings this is just referring to "USB debugging" turned on.
Put the boot.img in the "Kernel Here" folder which is in the "Kernal Flash Tool v3".
Then after run the flash.bat (windows) or flash.sh(mac) file in that tool folder.
That should do it.
---------- Post added at 05:54 PM ---------- Previous post was at 05:53 PM ----------
F9zSlavik said:
I don't know what you mean by that could you be more specific please?
Click to expand...
Click to collapse
And where are you still having problems?
That's what I thought but I wanted to make sure that what I needed to do, I was semi sure but I do not want to brick my phone by doing a step I was not suppose to.
ADB is a confusing term debugging makes a lot more sense and that is what I figured but I did not see any reference between adb and debugging mode.
So after following these steps, this will install beastmod?
I saved my contacts, sms, and call logs using a program called supa back up, they were saved on my sd card.
Anything else I need to know?
And thank yo for taking the time to fill in the gaps I really do appreciate and hopefully this thread will help anyone else that was confused as I was.
UPDATE
Does the phone need to be in any specific mode? I have it as Disk Drive and after running the bat I get a msg saying error device not found" and "waiting for device"
F9zSlavik said:
That's what I thought but I wanted to make sure that what I needed to do, I was semi sure but I do not want to brick my phone by doing a step I was not suppose to.
ADB is a confusing term debugging makes a lot more sense and that is what I figured but I did not see any reference between adb and debugging mode.
So after following these steps, this will install beastmod?
I saved my contacts, sms, and call logs using a program called supa back up, they were saved on my sd card.
Anything else I need to know?
And thank yo for taking the time to fill in the gaps I really do appreciate and hopefully this thread will help anyone else that was confused as I was.
UPDATE
Does the phone need to be in any specific mode? I have it as Disk Drive and after running the bat I get a msg saying error device not found" and "waiting for device"
Click to expand...
Click to collapse
The boot.img is the kernel. Flashing it doesn't mean you have BeastMod.
You need to download BeastMod and flash it through recovery to get BeastMod on your phone.
Remember to wipe data, wipe dalvik and wipe cache.
After you flash the ROM then you flash the kernel using the tool.
Sometimes the kernel needs to flashed twice to fix any issues you might have after flashing a ROM and new kernel.
First boot takes longer and after first boot, once the phone settles, reboot again.
Your phone needs to be in "charge only" and not "disk drive" for ADB to recognize it.
do not worry about bricking your phone, you actually cant since there is no s-off yet + htc hasnt released much of the sources so pretty much ur phone is locked and cant brick it.
OK I did the flash.bat, phone restarted.
So in order to install the beastmod, do I copy the beastmod file I downloaded into the sdcard? Then reboot and install it through recover?
How do I wipe the data?
F9zSlavik said:
OK I did the flash.bat, phone restarted.
So in order to install the beastmod, do I copy the beastmod file I downloaded into the sdcard? Then reboot and install it through recover?
How do I wipe the data?
Click to expand...
Click to collapse
Yes. Copy the zip you downloaded on to your sdcard then reboot into recovery.
Volume down + power.
Once in recovery you should have options.
First do a backup.
Then look for the options to wipe data/factory reset.
Then usually wipe cache and wipe dalvik are under the "advanced" option.
I do believe you have a custom recovery so your options might be different.
Navigate around to find the options to wipe all your data.
After you wipe then you navigate to "apply update from sdcard" and then "choose zip from sdcard" select BeastMod and flash it.
You should be ready to go.
Sorry my instructions aren't specific as I haven't rooted my Amaze or flashed a custom ROM.
So I don't know what your recovery looks like.
I am going off my experience with 7 MT4Gs and 2 Sensations.
The steps should be pretty basic when flashing a ROM anyway.
I understand that for someone who is new at this reading the instructions might seem complicated at times.
I'm just trying my best to reword those instructions for you and put it steps you can understand.
Alright, final question, do I need to make a folder for the files that in the zip folder or do I just copy them to the sdcard2 directory as the way its shown when you un zip the beastmod.zip file?
F9zSlavik said:
Alright, final question, do I need to make a folder for the files that in the zip folder or do I just copy them to the sdcard2 directory as the way its shown when you un zip the beastmod.zip file?
Click to expand...
Click to collapse
Don't unzip it. Just place the entire thing on your sdcard.
If you're flashing the ROM through recovery you should not need to unzip it.
It's just placing it on your SDcard and flashing it.
ooooh
I will try it right now then.
OK
Off topic question, Cynogen is a mod like Beastmod correct?
UPDATE
Alright its been flashed yay it works lol. Do I need to flash the kernel again? I did it before, do i have to do it afterwards as well, you mention that earlier.
Boy it looks so different...... so the Sense theme is still there but just hidden in some sort of way? Will they ever disable the security on this phone or is that permanent?
Dude if the admin are smart they will PIN this thread. I am a computer guy I fix them for a living mod the etc and damm this was a pain in the ass. The information is there but its missing certain details and its scattered, I searched around and sort of has the jist of it but honestly they should make a faq on how to more or less how its detailed in this thread, would save a lot of time and effort.
This forum is so awesome! lol
This is going to need some getting use to....
Any advice on what to do next? lol Like I said this is the 1st time I've own a phone that is not a blackberry...
As A Noob here im a small bit confused.
Was going to follow this link Complete Noobs Guide but some of the links in that guide dont work anymore.
So then I came across this Video and seems too easy to do
Is the video the same thing as the noobs guide?
If it is, and I follow the video, what Rom is the best one to use.
Just looking for a stable rom, good looking and saves battery.
Thank you, great website.
Rom is your choice, yes it's so simple it takes literally a couple of mins, it took me longer to dl the files needed than to root
Personally i use the rom in my sig - Neo is the dogs bollocks
Thanks for the help.
Think I have everything sorted, last thing is do I need an SD card for this.
Dont think I do but just want to make sure before start.
Nope you can just use internal memory...
As far as I know you don't need an SD card. I rooted mine last night and was really surprised how easy it is. Literally a 5 minute process (including flashing the sensation ROM). After reading up on here I used this thread and this page which has an easy to follow, summarised guide below the video.
It was a lot easier than I expected but to be far the last device I rooted was a HTC and so didn't know what to expect without it being locked.
If you run into any problems just search for the solution as so many people have rooted I'm pretty sure everything will have been covered.
Make sure you have a insecure kernel>use SuperOneClick to root>flash CWM>put ROM on sd>boot in CWM recovery>wipe data & cache & dalvik cache> install from sd>ROM of choice>do it twice just to be safe! You're done. If you need any additional help browse/search xda forums. If you need any additional help let me know!
Ok successfully rooted and placed a kernel on the phone.
Before I put on a new ROM, I wanted to get rid of the yellow triangle.
I found this page but all the files are on mega upload which is currently down at the minute.
Any ideas how I can get a stock kernels to remove the yellow triangle?
I just seen he has updated all the links. Great news.
Just read on the last comments and im now confused.
Does the link in the previous comment fix the yellow triangle?
yellow triangle indicate that you have not a stock kernel on your phone,
normally flash a stock one and the triangle will go away,
I have not searching deep to get rid of the triangle with any kernel but ways seems to be possible.. posts on dev forum answer this
a usb jig is fine and the simple one I think, but you have to make or buy it..
try the V3RTR3MA 4.6 from the android development forum here
its one of the best roms i've ever flashed
Sent from my GT-I9100 using XDA App
Why are you even bothered by it? U only see it on boot up
Because its very easy to get rid of.
All I need is a original Kernel.
I downloaded one and the image file is a MD5 file?
Is that correct?
Yes. 10 ch
Rochey21 said:
Because its very easy to get rid of.
All I need is a original Kernel.
I downloaded one and the image file is a MD5 file?
Is that correct?
Click to expand...
Click to collapse
MistahBungle said:
Yes. 10 ch
Click to expand...
Click to collapse
Sorry probably stupid question but what does that mean?
How to install new ROM ICS on my Galaxy SII
I'm trying to install by boot options but always i select the zip rom i'd received a message that the package cannot by validade. Why ?
Rochey21 said:
Sorry probably stupid question but what does that mean?
Click to expand...
Click to collapse
The minimum message length is 10 characters, so when you just want to say yes or no you as 10chars or other stuff to bump the lenght so it will post.
roguand said:
I'm trying to install by boot options but always i select the zip rom i'd received a message that the package cannot by validade. Why ?
Click to expand...
Click to collapse
You dont have CWM recovery (stock recovery wont flash custom rom zips), go do some more reading before you flash a rom so you understand what you are getting into, FAQ's here.
roguand said:
I'm trying to install by boot options but always i select the zip rom i'd received a message that the package cannot by validade. Why ?
Click to expand...
Click to collapse
Or do you mean signature verification ?
So what is the easiest method to root this device?
Can I install 4ext instead of cwn?
And what is this stuff about different ucl* roms I keep seeing,not sure.
http://forum.xda-developers.com/showthread.php?t=1518962
Kernel- http://forum.xda-developers.com/showthread.php?t=1504920!
I would run stock rom with a overclocked kernel get the "set cpu" app... set it to 1.84 ghz this run fine on my note seems very stable.min 384.If it seems unstable make you click set to boot "off" until everything seems stable then click set to boot enabled.
SysAdmNj said:
So what is the easiest method to root this device?
Can I install 4ext instead of cwn?
And what is this stuff about different ucl* roms I keep seeing,not sure.
Click to expand...
Click to collapse
Da_G Has an odin root available in the DEV section for the stock GB. As far as I know there are only 2 types of recovery for the Note Braway's CWM and the TWRP 2.1.2 ( I use CWM.) As far as the UCL*** those are all ICS leak builds. UCLE2 being the most recent. Personally I have pretty much stuck with Team Perfections builds but depending on what you want another ROM may suite your needs. If you install one of the new roms they keep root access and install either SU or superuser and are all flashable via CWM, however I assume you need to be rooted prior to installing which is where Da_G root comes in.
wish777 said:
http://forum.xda-developers.com/showthread.php?t=1518962
Kernel- http://forum.xda-developers.com/showthread.php?t=1504920!
I would run stock rom with a overclocked kernel get the "set cpu" app... set it to 1.84 ghz this run fine on my note seems very stable.min 384.If it seems unstable make you click set to boot "off" until everything seems stable then click set to boot enabled.
Click to expand...
Click to collapse
Stock? I hate touchwiz lol. Im honestly going to try a few custom roms.
cjsspape said:
Da_G Has an odin root available in the DEV section for the stock GB. As far as I know there are only 2 types of recovery for the Note Braway's CWM and the TWRP 2.1.2 ( I use CWM.) As far as the UCL*** those are all ICS leak builds. UCLE2 being the most recent. Personally I have pretty much stuck with Team Perfections builds but depending on what you want another ROM may suite your needs. If you install one of the new roms they keep root access and install either SU or superuser and are all flashable via CWM, however I assume you need to be rooted prior to installing which is where Da_G root comes in.
Click to expand...
Click to collapse
So I guess 4ext doesnt work on the note? Also, its easy to brick this device?
I didn't see any flash able zips for it in the dev section so I don't think its supported. Rom manager for the most part is unsupported also except for fixing permissions after flashing new stuff. This is my first experience with android (iPhone convert haha) I haven't had any bad experiences flashing yet but general rule of thumb is read and re read instructions for specific roms and make sure its specifically for the i717 not n7000 or anything else because that will hard brick. Also use only approved ics kernel because of the super brick bug out there
Sent from my SAMSUNG-SGH-I717 using xda premium
cjsspape said:
however I assume you need to be rooted prior to installing which is where Da_G root comes in.
Click to expand...
Click to collapse
Nope, you can just flash cwm with Odin and then flash a ROM without rooting first. The ROM is rooted.
The only reason to root first is if you want to run titanium backup to nip any apps you may have installed prior to deciding to ROM.
Also that "super brick bug" is only on exynos processor equipped phones, I717 has a Qualcomm. So if you stick to just kernels MADE FOR THIS DEVICE then you can't ever encounter it.
Ah was never 100% clear on that cuz I rooted prior to running saurom rom. As for the kernel thing that's what I meant about not using the n7000 stuff prolly should of been more specific didn't want ya to make a mistake on that.
Sent from my SAMSUNG-SGH-I717 using xda premium
Yup.
And now that you've made the glorious switch to Android, when you upgrade to the next beast that catches your eye, you can take the titanium backup folder from your note, drop it in the sdcard of your new phone, install cwm, flash a ROM, then restore your backed up apps.
Easy peasy
So I need to verify, I can completely install a rom that gets rid of touchwiz? Also would this same rom improve battery charging time?
If I could just flash cm7 on this baby I'd be fine with that.
Cm7 is not supported on this device
There are a couple aosp roms floating around, but they are still in early development, alpha stage.
studacris said:
Nope, you can just flash cwm with Odin and then flash a ROM without rooting first. The ROM is rooted.
The only reason to root first is if you want to run titanium backup to nip any apps you may have installed prior to deciding to ROM.
Also that "super brick bug" is only on exynos processor equipped phones, I717 has a Qualcomm. So if you stick to just kernels MADE FOR THIS DEVICE then you can't ever encounter it.
Click to expand...
Click to collapse
+1....Common misconception is that you need to be rooted to flash a custom ROM. CWM is the first thing I would flash. Like Studacris said, everything else is easy peasy.
Sent from Galaxy Note
ok so i d/l odin and it goes through i followed all steps right, and it just says sdded
removed and then it freezes after 9 total of them.... what do i do? the phone still says
downloading....
do not turn off target
been like this for over 5 minutes. i downloaded drivers and all that. step by step.
studacris said:
Nope, you can just flash cwm with Odin and then flash a ROM without rooting first. The ROM is rooted.
The only reason to root first is if you want to run titanium backup to nip any apps you may have installed prior to deciding to ROM.
Also that "super brick bug" is only on exynos processor equipped phones, I717 has a Qualcomm. So if you stick to just kernels MADE FOR THIS DEVICE then you can't ever encounter it.
Click to expand...
Click to collapse
so let me get this straight also im new. but right now all i have done is use odin to put cwm recovery on my phone and i have not installed superuser yet. because phone would not recognize with computer. so since i only have cwm i can go to this site on my phone, download a rom from my phone, to my phone and then go into cwm and zip it from there. is this correct?
joshmingus said:
so let me get this straight also im new. but right now all i have done is use odin to put cwm recovery on my phone and i have not installed superuser yet. because phone would not recognize with computer. so since i only have cwm i can go to this site on my phone, download a rom from my phone, to my phone and then go into cwm and zip it from there. is this correct?
Click to expand...
Click to collapse
Exactly. No need to root stock ROM if your going to flash a rooted ROM anyway. Make sure you do a backup of your stocker before doing anything else. The only reason to root your stock ROM would be to backup all your apps and data. If you don't do that, you have to start from scratch. What's the issue you're having with the superuser zip?
Sent from Galaxy Note
Make sure your not trying to hook the phone up to the PC while in recovery.
Sent from Galaxy Note
anyone gonna answer my question???
usmarine2141 said:
anyone gonna answer my question???
Click to expand...
Click to collapse
Don't really understand it to be honest. Need a step by step of what you did and what your trying to flash. Could be many things.
Sent from Galaxy Note
trying to root it...
I figured that, but there's more than one way to do that. You flashing cwm or kernel?
Sent from Galaxy Note
ok it said pass... what do i do now? its still on the downloading screen??????? i put the pda. tar in the pda box and then said pass... stuck on downloading screen what nex?
---------- Post added at 12:28 AM ---------- Previous post was at 12:24 AM ----------
ok so nobody explains you had to choolse something to flash after it said that!!! now my phone says firmware upgrade encountered a issue
Hey guys I rooted and unlocked my Verizon Galaxy note. I installed some custom roms using the Touchwiz recovery and everything works except... I cannot make any phone calls or text. It says mobile signal or something like that. Did I do something wrong can any one assist me on this matter? I followed the steps on the form as well as several videos showing me how to do this. another question do i need to root first or unlock first? I've done this process over and over again but cannot get my cell phone to make calls or get data, There is like a hazard sign where the data shows.. please help me!
ovakill22 said:
Hey guys I rooted and unlocked my Verizon Galaxy note. I installed some custom roms using the Touchwiz recovery and everything works except... I cannot make any phone calls or text. It says mobile signal or something like that. Did I do something wrong can any one assist me on this matter? I followed the steps on the form as well as several videos showing me how to do this. another question do i need to root first or unlock first? I've done this process over and over again but cannot get my cell phone to make calls or get data, There is like a hazard sign where the data shows.. please help me!
Click to expand...
Click to collapse
You should ask in the ROMs thread.
When you unlock, you also gain root.
kimdoocheol said:
You should ask in the ROMs thread.
When you unlock, you also gain root.
Click to expand...
Click to collapse
So if I follow the unlock guide. via ODIN and casual I gain root? I'm a newbie to this lol former Iphone user all of this is new to me. I've tried several roms and still have the same issue. Also followed the guides as well. It's very fustrating because I get no where regarding this matter. Even watching the video's and following the steps have led me to be unsucessful..
ovakill22 said:
So if I follow the unlock guide. via ODIN and casual I gain root?
Click to expand...
Click to collapse
1. Flash revision3 via odin following the guide in its thread. (This will give you root)
2.Follow the bootloader unlock process in adam's guide from its thread (this will unlock your bootloader and unless hes changed it flash twrp a custom rocovery.)
Now you need to reboot into recovery and make a back up. To do this you need to go into recovery (twrp or clockwork mod). You can get to recovery by powering off the phone and holding volume-up+home+power. Now go to backup and restore back up. If you have an external sd I would recommend selecting the option to backup to it.
After that select a rom you want. If you want stock rooted you dont have to flash anything. Look in your app drawer if you see an app called supersu or super user you're rooted. If you want another rom follow these steps to flash it.
1. Read rom thread for known bugs so you know what youre getting into.
2. Download rom. DO NOT UNZIP.
3. Check md5 sum.
4. Move to external or internal sd where you can find it.
5. Boot into recovery.
6. Select install.
7 navigate to rom file.
8. Swipe to install. If it has aroma follow instructions if not wait for it to do its thing
ovakill22 said:
Hey guys I rooted and unlocked my Verizon Galaxy note. I installed some custom roms using the Touchwiz recovery and everything works except... I cannot make any phone calls or text. It says mobile signal or something like that. Did I do something wrong can any one assist me on this matter? I followed the steps on the form as well as several videos showing me how to do this. another question do i need to root first or unlock first? I've done this process over and over again but cannot get my cell phone to make calls or get data, There is like a hazard sign where the data shows.. please help me!
Click to expand...
Click to collapse
What ROM did you install?
johnnyvol said:
What ROM did you install?
Click to expand...
Click to collapse
Yeah..do you have a vzw phone? Did you flash a vzw rom for the note2?
johnnyvol said:
What ROM did you install?[/QUOT
I installed the clean rom verizon galaxy note 2 rom as well as the AOKP i believe and ran into that issue.
Click to expand...
Click to collapse
bendystrawboy said:
Yeah..do you have a vzw phone? Did you flash a vzw rom for the note2?
Click to expand...
Click to collapse
Yes I did. I used several roms but came into that issue still. I'm actually back to stock and later on today I'm going to try and unlock and root again. Wish me LUCK!
Evankovich406 said:
1. Flash revision3 via odin following the guide in its thread. (This will give you root)
2.Follow the bootloader unlock process in adam's guide from its thread (this will unlock your bootloader and unless hes changed it flash twrp a custom rocovery.)
Now you need to reboot into recovery and make a back up. To do this you need to go into recovery (twrp or clockwork mod). You can get to recovery by powering off the phone and holding volume-up+home+power. Now go to backup and restore back up. If you have an external sd I would recommend selecting the option to backup to it.
After that select a rom you want. If you want stock rooted you dont have to flash anything. Look in your app drawer if you see an app called supersu or super user you're rooted. If you want another rom follow these steps to flash it.
1. Read rom thread for known bugs so you know what youre getting into.
2. Download rom. DO NOT UNZIP.
3. Check md5 sum.
4. Move to external or internal sd where you can find it.
5. Boot into recovery.
6. Select install.
7 navigate to rom file.
8. Swipe to install. If it has aroma follow instructions if not wait for it to do its thing
Click to expand...
Click to collapse
Will do later on! wish me luck! I'll keep you posted if i'm successful or not...
Sounds like your phone now locked to a different network. This can occur. You did make a backup,efs etc?
From box 13......
howard bamber said:
Sounds like your phone now locked to a different network. This can occur. You did make a backup,efs etc?
From box 13......
Click to expand...
Click to collapse
No I did not do that. Now would I do that through recovery? I'm new to the andriod game lol Former Iphone user..
ovakill22 said:
No I did not do that. Now would I do that through recovery? I'm new to the andriod game lol Former Iphone user..
Click to expand...
Click to collapse
To do this wouldve meant you flashed a rom not meant for verizion and got another carriers radios. Also did you check in your settings to make sure you didnt switch data off airplane mode or switch off cdma/lte. Is your phone getting service now that you're back to stock?
Sent from my SCH-I605 using xda app-developers app
Hi i got my white AT&T Galaxy Note ii few months back and i really loved it, i was first using my phone with Wifi since it was locked, but after unlocking it few days ago, when i inserted my sim card, the phone showed 4G and ever since my BATTERY have not known peace, i loose 1% battery life in like 2 minutes.
I also had issues turning on my wifi hotspot so i can share network to other devices.
When i found this awesome site, i learned that i could root my phone and get it to do so much more, i did that successfully with an APK app here called framaroot, now i followed every single step well and booted my phone with Samsung Custom rom i think.
But the problem now is, my battery is still not been able to hold a charge, the 4G icon is still there which i don't need for anything, am ok with 3G, and i still have all this crazy useless AT&A apps allover my phone and i can't even turn on my hotspot for tethering.
Please i hope to get solution to this problems, and i hope i have not asked my question in the wrong thread.
Thanks all.
Johnny10119 said:
Hi i got my white AT&T Galaxy Note ii few months back and i really loved it, i was first using my phone with Wifi since it was locked, but after unlocking it few days ago, when i inserted my sim card, the phone showed 4G and ever since my BATTERY have not known peace, i loose 1% battery life in like 2 minutes.
I also had issues turning on my wifi hotspot so i can share network to other devices.
When i found this awesome site, i learned that i could root my phone and get it to do so much more, i did that successfully with an APK app here called framaroot, now i followed every single step well and booted my phone with Samsung Custom rom i think.
But the problem now is, my battery is still not been able to hold a charge, the 4G icon is still there which i don't need for anything, am ok with 3G, and i still have all this crazy useless AT&A apps allover my phone and i can't even turn on my hotspot for tethering.
Please i hope to get solution to this problems, and i hope i have not asked my question in the wrong thread.
Thanks all.
Click to expand...
Click to collapse
may the custom rom was not working well
so just flash the original rom using odin
sangalaxy said:
may the custom rom was not working well
so just flash the original rom using odin
Click to expand...
Click to collapse
Ok first i'll like to thanks you for the fast response, i appreciate it.
But since am new to all this, can you share a link here with clear direction on how to flash with odin and where to download whats needed, sorry if this sounds stupid, but am trying my best to catch up been spending all day on the AT&T Note II section of the forum to learn more
Johnny10119 said:
Ok first i'll like to thanks you for the fast response, i appreciate it.
But since am new to all this, can you share a link here with clear direction on how to flash with odin and where to download whats needed, sorry if this sounds stupid, but am trying my best to catch up been spending all day on the AT&T Note II section of the forum to learn more
Click to expand...
Click to collapse
go here for downloading you stock firmware
or here also download odin from the second link
then open odin and place the downloaded tar file in pda
if it is a zip file extract it you will get tar file or tar.md5
then backup your data etc and turn off your phone
press vol down+home+power button to enter a screen then press vol up to enter download mode
connect your phone to pc
odin will show the port you connected
then start flashing after some time usually below 10min
odin will show pass then remove your phone and on
your phone will be as fresh as you bought
sangalaxy said:
go here for downloading you stock firmware
or here also download odin from the second link
then open odin and place the downloaded tar file in pda
if it is a zip file extract it you will get tar file or tar.md5
then backup your data etc and turn off your phone
press vol down+home+power button to enter a screen then press vol up to enter download mode
connect your phone to pc
odin will show the port you connected
then start flashing after some time usually below 10min
odin will show pass then remove your phone and on
your phone will be as fresh as you bought
Click to expand...
Click to collapse
Hi thanks again for the fast response.
I don't want anything AT&T on my phone, so my question now is, can i flash to latest Jedi X ROM for rooted Galaxy Note 2 users using the same process ?
Let me know what you think.
Thanks
Johnny10119 said:
Hi thanks again for the fast response.
I don't want anything AT&T on my phone, so my question now is, can i flash to latest Jedi X ROM for rooted Galaxy Note 2 users using the same process ?
Let me know what you think.
Thanks
Click to expand...
Click to collapse
yes you can but the better is flash stock rom before you go to any custom ones
first flash the stock
then root
then do as you want install any custom rom kernel etc etc
and the process for installing stock rom will be on the original thread of the rom so follow that
sangalaxy said:
yes you can but the better is flash stock rom before you go to any custom ones
first flash the stock
then root
then do as you want install any custom rom kernel etc etc
and the process for installing stock rom will be on the original thread of the rom so follow that
Click to expand...
Click to collapse
Thanks again.
One more thing please and i hope you understand why am asking this.
Am in Africa right now and downloading here is very much limited, so i want to know, do i really need to download the the stock rom from the first link and flash it before this problem can be fixed or can the CUSTOM Jedi rom do the job for me as well, please i don't want to download 2GB if i really don't need it then renew my internet connection with a huge amount.
Thanks
Johnny10119 said:
Thanks again.
One more thing please and i hope you understand why am asking this.
Am in Africa right now and downloading here is very much limited, so i want to know, do i really need to download the the stock rom from the first link and flash it before this problem can be fixed or can the CUSTOM Jedi rom do the job for me as well, please i don't want to download 2GB if i really don't need it then renew my internet connection with a huge amount.
Thanks
Click to expand...
Click to collapse
the custom rom should work try
but be care full and follow the instructions
if anything goes wrong you will have to download the original rom
sangalaxy said:
the custom rom should work try
but be care full and follow the instructions
if anything goes wrong you will have to download the original rom
Click to expand...
Click to collapse
Hi am going through it now, once am done i'll give you an update on how it all went.
Thanks
Hi,
After installing the Jedix 19 ROM the phone is stock on the Samsung Galaxy Note II logo.
What do you think could be the cause of this, i even did the wipe data and wipe cache process but still the same thing.
Do you have a recovery installed? If you've got cwm, download CyanogenMod and stick it on an mini SD card, move it to your phone, factory wipe it and flash it. Its worked for me on a boot looped gnote2. Also, once you get a working ROM, just use your root to remove system apps.
only do this is if you have a custom recovery like cwm or twrp
Step by step:
0: get the required stuff, you're gonna need about 250mb of internet, a microsd card, a card reader and some patience.
1: download CyanogenMod, http://get.cm and get a stable for the t0lteatt (att gnote 2)
2:download gapps for 4.3.
3:move them both to the SD and put it in your phone. Boot into recovery.
4:factory reset it, hope you don't using a out of the box phone.
5:flash cm, then gapps.
6:reboot
7:if it works, take a backup
Good luck!
Sent from carbon note 2 on XDA premium app
shbaldw said:
Do you have a recovery installed? If you've got cwm, download CyanogenMod and stick it on an mini SD card, move it to your phone, factory wipe it and flash it. Its worked for me on a boot looped gnote2. Also, once you get a working ROM, just use your root to remove system apps.
only do this is if you have a custom recovery like cwm or twrp
Step by step:
0: get the required stuff, you're gonna need about 250mb of internet, a microsd card, a card reader and some patience.
1: download CyanogenMod, http://get.cm and get a stable for the t0lteatt (att gnote 2)
2:download gapps for 4.3.
3:move them both to the SD and put it in your phone. Boot into recovery.
4:factory reset it, hope you don't using a out of the box phone.
5:flash cm, then gapps.
6:reboot
7:if it works, take a backup
Good luck!
Sent from carbon note 2 on XDA premium app
Click to expand...
Click to collapse
Hi thanks so much for your reply, i appreciate your time.
Yes i have a backup file with the help of CWM and i have been able to move back to my backup file.
My phone model is SAMSUNG-SGH-I317 and from all the reviews i have seen i think the JediX Custom ROM is the best yet for it so am trying to stick with it for a start.
I need suggestions on why after getting the congratulation message to feel the force, it won't boot and just hangs.
Please if you have experienced this in the past please your suggestions are welcomed.
Ask me questions and i'll provide answers that am sure will help you to help me solve this
I would just flash cyanogen for the time being to see if itll even boot. It just replaces the downloading stock in previous posts. If you can get it to boot, that will be progress.
Sent from my Nexus 7 using XDA Premium 4 mobile app
shbaldw said:
I would just flash cyanogen for the time being to see if itll even boot. It just replaces the downloading stock in previous posts. If you can get it to boot, that will be progress.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So sorry i forgot to mention it that i was able to restore to my stock backup file and my phone is working fine, but i still want to flash a ROM on it.
Am tired of charging this phone every minute, this is a Note II for crying out loud.
If i ask you to choose for me, between Jedix19 and CyanogenMod 10, which would you stick with so that i'll know if am to start downloading a new ROM to flash again and try.
Thanks
Honestly I've never used a Jedi ROM, so mainly if you want to stick to Jedi try flashing a different version. Good job taking that backup, that saved a whole lotta trouble.
Sent from my Nexus 7 using XDA Premium 4 mobile app
shbaldw said:
Honestly I've never used a Jedi ROM, so mainly if you want to stick to Jedi try flashing a different version. Good job taking that backup, that saved a whole lotta trouble.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well I really won't take the credit, you guys are just great.
Now i have fine the perfect rom that is best for this version of my note and good to battery life too, I need suggestions before i start downloading.
deleted
sangalaxy said:
deleted
Click to expand...
Click to collapse
Well am on JediX19 now everything runs smoothly, but my battery life is still messed up, i really need help to get this fixed, am not enjoying my phone
Johnny10119 said:
Well am on JediX19 now everything runs smoothly, but my battery life is still messed up, i really need help to get this fixed, am not enjoying my phone
Click to expand...
Click to collapse
for battery try any other kernel or use set cpu or no frills to set up the kernel for optimum battery
That, or your battery may just be shot. You can buy one for it off the internet: I'm rockin' a 5300 mah for this.
Sent from carbon note 2 on XDA premium app