Related
I get an error when I type the fastboot oem relock
INFO[ERR] Command error !!!
Why does this happen. I want to relock my phone so I can update my firmware.
Please Help!!
U use the cmd line for flashing the token
dragonrazorz said:
U use the cmd line for flashing the token
Click to expand...
Click to collapse
?????????
I'm already unlocked, I need to relock, can you tell me the steps I need to Relock
xxdababyonexx said:
?????????
I'm already unlocked, I need to relock, can you tell me the steps I need to Relock
Click to expand...
Click to collapse
Are you in HBOOT when you try to relock? You should be. Also if you have a custom recovery you're going to have to RUU.
MrSmith317 said:
Are you in HBOOT when you try to relock? You should be. Also if you have a custom recovery you're going to have to RUU.
Click to expand...
Click to collapse
Yes I'm on hboot now and already flashed the stock recovery but I need to know is why it is not letting me relock, thats the error I get all the time
Fastboot oem lock
Try that
Sent from my ADR6425LVW using XDA App
k_flan said:
fastboot oem lock
try that
sent from my adr6425lvw using xda app
Click to expand...
Click to collapse
thanks a million cant believe it was that difficult
k_flan said:
fastboot oem lock
try that
sent from my adr6425lvw using xda app
Click to expand...
Click to collapse
ok now i get the update fail mainversion older update fail
http://forum.xda-developers.com/showthread.php?t=1467099
Sent from my ADR6425LVW using XDA App
I cant even boot up my phone to enable debug mode
k_flan said:
http://forum.xda-developers.com/showthread.php?t=1467099
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
k_flan said:
Fastboot oem lock
Try that
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
Haha didn't notice that
Sent from my ADR6425LVW using Tapatalk
xxdababyonexx said:
I cant even boot up my phone to enable debug mode
Click to expand...
Click to collapse
You shouldn't need debug mode. Run the ruu then run the update
Sent from my ADR6425LVW using Tapatalk
Shoot my bad lol. I read it right, idk y I thought u were unlocking lol
MrSmith317 said:
You shouldn't need debug mode. Run the ruu then run the update
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
i got it relocked already now i need help with the fix mainver error because adb shell wont locate device
xxdababyonexx said:
i got it relocked already now i need help with the fix mainver error because adb shell wont locate device
Click to expand...
Click to collapse
Easiest way to ignore the mainver is to get the kernel(boot.img) from the RUU or whatever ROM you're trying to flash. Then boot the phone into HBOOT, plug into your pc, and issue the command "fastboot flash boot boot.img" (In DOS/Command Prompt). That will flash the kernel without dealing with the mainver issue.
Thanks everyone, I finally got the new ota radios and running clean rom 1.6. Patience was the key. I got my mainvers down to 1.00.000.0 as I was referred and WaaLaahttp://forum.xda-developers.com/showthread.php?t=1467099
I apprecaite you guys help. I will be back I guarantee. I love trying out new roms.
i rooted my phone that was not a problem, i did the lazy panda s-off not a problem but for some reasone i can not flash recovery using fastboot is there another way ? every time i try when it goes to verify sig it fails
Try flashing thru goo manager, is in the play store
Sent from my EVO using xda premium
Sounds like you don't have it named right.
Also verify that you don't actually have .zip.zip as windows hides file extensions
Sent from my EVO using Tapatalk 2
lokster_1000 said:
i rooted my phone that was not a problem, i did the lazy panda s-off not a problem but for some reasone i can not flash recovery using fastboot is there another way ? every time i try when it goes to verify sig it fails
Click to expand...
Click to collapse
Did you flash the 1.12.2222 HBOOT from the LazyPanda website after running the S-OFF tool?
DNarsingh said:
Did you flash the 1.12.2222 HBOOT from the LazyPanda website after running the S-OFF tool?
Click to expand...
Click to collapse
Do we need to flash that hboot after s off I did not and I'm on latest radio and rom?
Sent from my EVO using xda premium
tech7 said:
Do we need to flash that hboot after s off I did not and I'm on latest radio and rom?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Yes, if you haven't updated the hboot you can't flash through fast boot.
You can get it from either the lazypanda website or by using regaws boot loader customizer
Sent from my EVO using Tapatalk 2
tech7 said:
Do we need to flash that hboot after s off I did not and I'm on latest radio and rom?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
The hboot that comes with last panda allows fastboot commands. Go ahead and flash it if you haven't already. Your hboot version should say 1.12.2222 once it's done.
Sent from my EVO LTE
premo15 said:
The hboot that comes with last panda allows fastboot commands. Go ahead and flash it if you haven't already. Your hboot version should say 1.12.2222 once it's done.
Sent from my EVO LTE
Click to expand...
Click to collapse
How can I flash the 1.12.2222
Sent from my EVO using xda premium
Via the bootloader.
I'm suprised you're trying to install recovery through fastboot and not through the bootloader. Thats one of the best perks to being S-OFF :laugh:
From http://teamw.in/project/twrp2/98
"Download - Bootloader Method:
http://techerrata.com/file/twrp2/jewel/PJ75IMG-twrp-2.2.1-jewel.zip
Download the file above and rename to PJ75IMG.zip and place it on the root of the sdcard. Boot into bootloader and accept the update. Boot back to the rom and rename/remove the file"
You can install all sorts of things through bootloader. It has to be on the external SD-card, not the internal one
Rxpert said:
Via the bootloader.
I'm suprised you're trying to install recovery through fastboot and not through the bootloader. Thats one of the best perks to being S-OFF :laugh:
From http://teamw.in/project/twrp2/98
"Download - Bootloader Method:
http://techerrata.com/file/twrp2/jewel/PJ75IMG-twrp-2.2.1-jewel.zip
Download the file above and rename to PJ75IMG.zip and place it on the root of the sdcard. Boot into bootloader and accept the update. Boot back to the rom and rename/remove the file"
You can install all sorts of things through bootloader. It has to be on the external SD-card, not the internal one
Click to expand...
Click to collapse
No I flash with goo manager and that how I flash it but I just flash the hboot. Thanks for the help
Sent from my EVO using xda premium
Rxpert said:
Via the bootloader.
I'm suprised you're trying to install recovery through fastboot and not through the bootloader. Thats one of the best perks to being S-OFF :laugh:
From http://teamw.in/project/twrp2/98
"Download - Bootloader Method:
http://techerrata.com/file/twrp2/jewel/PJ75IMG-twrp-2.2.1-jewel.zip
Download the file above and rename to PJ75IMG.zip and place it on the root of the sdcard. Boot into bootloader and accept the update. Boot back to the rom and rename/remove the file"
You can install all sorts of things through bootloader. It has to be on the external SD-card, not the internal one
Click to expand...
Click to collapse
thanks thats what i was looking for
I have a Rezound rooted and S-off. If I want to return completly to stock can I get S-on with this device?
tjamscad said:
I have a Rezound rooted and S-off. If I want to return completly to stock can I get S-on with this device?
Click to expand...
Click to collapse
yes you can. here is how to get s-on.
adb devices
adb reboot bootloader
fastboot devices
fastboot oem writesecureflag 3
fastboot reboot-bootloader
*verify you are locked s-on
fastboot reboot
(you will need to load a non engineering hboot before doing the steps above.)
synisterwolf said:
(you will need to load a non engineering hboot before doing the steps above.)
Click to expand...
Click to collapse
Yep, and as such, I highly recommend running the 3.14.605.12 RUU before doing those steps.
Also MAKE sure your not on an eng. Hboot when you turn s-on it would brick your phone.
sent from my s-off reZound rockin' viperRez Rom on global ICS firmware
synisterwolf said:
yes you can. here is how to get s-on.
adb devices
adb reboot bootloader
fastboot devices
fastboot oem writesecureflag 3
fastboot reboot-bootloader
*verify you are locked s-on
fastboot reboot
(you will need to load a non engineering hboot before doing the steps above.)
Click to expand...
Click to collapse
load a non engineering hboot? I'm not faliluar "non engineering hboot".
An engineering hboot allows extended fastboot commands while locked...you can only run them when you're s-off. Just flash the OTA RUU before you run those commands and you'll be fine. That will get everything back to stock, hboot included.
shrike1978 said:
Yep, and as such, I highly recommend running the 3.14.605.12 RUU before doing those steps.
Click to expand...
Click to collapse
shrike1978 said:
An engineering hboot allows extended fastboot commands while locked...you can only run them when you're s-off. Just flash the OTA RUU before you run those commands and you'll be fine. That will get everything back to stock, hboot included.
Click to expand...
Click to collapse
tjamscad said:
load a non engineering hboot? I'm not faliluar "non engineering hboot".
Click to expand...
Click to collapse
easiest way to get the non engineering hboot its to ruu. that way you can minimized the risk of bricking when going back to s-on.
what you should do is this:
back up your rom.
back up your internal sd card.
flash ruu -3.14.605.12-
do the steps for s-on
check to make sure you are s-on
then you will be at 100% factory out of the box phone.
*** please make sure you are at 80% or higher on battery life and have some free time. this might take up to an hour to do successfully. ***
shrike1978 said:
Yep, and as such, I highly recommend running the 3.14.605.12 RUU before doing those steps.
Click to expand...
Click to collapse
Why that RUU?
That's the one he suggested personally. Any fully stock ruu should be fine. Someone correct me if I'm wrong.
Sent from my ADR6425LVW using xda app-developers app
tjamscad said:
Why that RUU?
Click to expand...
Click to collapse
famouscollin said:
That's the one he suggested personally. Any fully stock ruu should be fine. Someone correct me if I'm wrong.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
The only reason I suggested that particular one is that it is the current OTA. Flash it, and you'll be at the "official" versions on your hboot and radios.
shrike1978 said:
The only reason I suggested that particular one is that it is the current OTA. Flash it, and you'll be at the "official" versions on your hboot and radios.
Click to expand...
Click to collapse
Great thanks, This is what I got from this thread. Correct?
1. Flash latest RUU for Rezound
2. *ADB required*
a. adb devices
b. adb reboot bootloader
c. fastboot devices
d. fastboot oem writesecureflag 3
e. fastboot reboot-bootloader
f. fastboot reboot (verify you are locked s-on)
Correct. Good luck
Sent from my ADR6425LVW using xda app-developers app
tjamscad said:
Great thanks, This is what I got from this thread. Correct?
1. Flash latest RUU for Rezound
2. *ADB required*
a. adb devices
b. adb reboot bootloader
c. fastboot devices
d. fastboot oem writesecureflag 3
e. fastboot reboot-bootloader
f. fastboot reboot (verify you are locked s-on)
Click to expand...
Click to collapse
This did loaded RUU and turned S-on but did not unlock. Tried this fastboot oem lock and that says "RELOCKED" not the same. It was worth a shot I guess.
While trying to reroot and get s-off I have managed to get things all jacked up. I am now S-on, Unlocked and Tampered. Is there a way out of this?
Anybody?
tjamscad said:
Anybody?
Click to expand...
Click to collapse
the ruu should have given you a stock locked hboot. try running it again with a locked/relocked bootloader..
famouscollin said:
the ruu should have given you a stock locked hboot. try running it again with a locked/relocked bootloader..
Click to expand...
Click to collapse
Thanks, this has not been going like planned. I think it is wunning out of space to give me warnings.
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/ name this to ph98img and flash in hboot. Your phone won't boot with the security warning. You have to run ruu.. this should help. It's the latest
Sent from my ADR6425LVW using xda app-developers app
famouscollin said:
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/ name this to ph98img and flash in hboot. Your phone won't boot with the security warning. You have to run ruu.. this should help. It's the latest
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
can i use that to get s-off?
tjamscad said:
can i use that to get s-off?
Click to expand...
Click to collapse
Yes. You'll have to unlock, flash recovery (amonRa personally), flash supersu in recovery. Use the .5 ICS version of control bear
Sent from my ADR6425LVW using xda app-developers app
famouscollin said:
Yes. You'll have to unlock, flash recovery (amonRa personally), flash supersu in recovery. Use the .5 ICS version of control bear
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Sent you a Gtalk, this is not working out for me
I had a unlocked bootloader, rooted rezound running AOKP JB rom. Now after trying to flash a differnet kernel (stupid me) I can't get past the bootloader screen. I was able to relock my bootloader but now on Hboot screen it says ***tampered*** *****relocked**** and ****security warning**** I am completely stuck. Am I SOL or is there a chance to fix this? Any help would be greatly appreciated.
bluerez79 said:
I had a unlocked bootloader, rooted rezound running AOKP JB rom. Now after trying to flash a differnet kernel (stupid me) I can't get past the bootloader screen. I was able to relock my bootloader but now on Hboot screen it says ***tampered*** *****relocked**** and ****security warning**** I am completely stuck. Am I SOL or is there a chance to fix this? Any help would be greatly appreciated.
Click to expand...
Click to collapse
Get back into fastboot. Unlocked your phone. You can just go back and flash the boot.img that was on your original rom
Flyhalf205 said:
Get back into fastboot. Unlocked your phone. You can just go back and flash the boot.img that was on your original rom
Click to expand...
Click to collapse
I tried. I went through the htc.dev and it all went ok until i tried to submit it. It said "unlocking bootloader failed"
bluerez79 said:
I tried. I went through the htc.dev and it all went ok until i tried to submit it. It said "unlocking bootloader failed"
Click to expand...
Click to collapse
You s-on or s-off?
Might as well install the RUU again...
Flyhalf205 said:
You s-on or s-off?
Might as well install the RUU again...
Click to expand...
Click to collapse
S-on
Can I flash with a locked bootloader?
Sent from my Galaxy Nexus using xda app-developers app
bluerez79 said:
Can I flash with a locked bootloader?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
You won't be able to flash a rom or kernel if your s-on and locked. The only thing you can do is try and unlock bootloader or run RUU and restart from scratch
I can't unlock boot loader. Went thru the process and it said the token was too long. So I guess I'll look for the RUU and give it a go.
Sent from my Galaxy Nexus using xda app-developers app
bluerez79 said:
I can't unlock boot loader. Went thru the process and it said the token was too long. So I guess I'll look for the RUU and give it a go.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
At what point did it say that? When you are trying to get it from the HTC site? If that's it you are just copying too much. Make sure you don't copy any extra characters at all.
If it's when you are flashing the unlock token bin file then I agree that you should just run the RUU and get back to fresh stock then try again.
Use the RUU that is the .12 version rather than the global leak, unless you have already run the global leak one, if you want to be able to take the newest OTA.
I tries to flash ruu from my pc. The command prompt said “access denied"
Sent from my Galaxy Nexus using xda app-developers app
And your bootloader is locked? You talked about getting the unlock token, did you unlock it again before RUUing?
It needs to be locked to run the RUU.
bluerez79 said:
I tries to flash ruu from my pc. The command prompt said “access denied"
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
How are you flashing it?
Fastboot flash and then the name of the ruu
Sent from my Galaxy Nexus using xda app-developers app
It was locked when I tried to flash ruu
Sent from my Galaxy Nexus using xda app-developers app
Try this:
fastboot oem rebootRUU
fastboot flash zip {nameofruu}.zip
Or place it on your sd card and flash it in hboot
If it's an exe file you need to double click on that on your pc while the phone is connected.
dear all
i have htc legend with unlocked S-ON and hboot 1.02.0000
i need to flash this arabic rom:
RUU_Legend_Froyo_S_HTC_ARA_3.30.415.6_Radio_47.51. 35.17_7.13.35.05_release_168871_signed
but it gives an error while installing. someone told me that i should soff the phone or make super cid
can any one help me by the steps to make my htc legend soff?
mofanofa said:
dear all
i have htc legend with unlocked S-ON and hboot 1.02.0000
i need to flash this arabic rom:
RUU_Legend_Froyo_S_HTC_ARA_3.30.415.6_Radio_47.51. 35.17_7.13.35.05_release_168871_signed
but it gives an error while installing. someone told me that i should soff the phone or make super cid
can any one help me by the steps to make my htc legend soff?
Click to expand...
Click to collapse
As far as I know you cant s-off hboot 1.02, besides, there is no need to, as you can pretty much do everything needed anyhow.
Your trying to install an ruu, so you need to re-lock hboot again.
From memory reboot into bootloader, connect phone to computer, select fastboot mode, in cmd mode on pc goto where fastboot.exe is and then type fastboot OEM lock.
Just double check that before doing it, the instructions were included in the unlocking email from htcdev.
Sent from my HTC Desire HD using xda app-developers app
ranger4740 said:
As far as I know you cant s-off hboot 1.02, besides, there is no need to, as you can pretty much do everything needed anyhow.
Your trying to install an ruu, so you need to re-lock hboot again.
From memory reboot into bootloader, connect phone to computer, select fastboot mode, in cmd mode on pc goto where fastboot.exe is and then type fastboot OEM lock.
Just double check that before doing it, the instructions were included in the unlocking email from htcdev.
Sent from my HTC Desire HD using xda app-developers app
Click to expand...
Click to collapse
dear i did relock but when flashing ruu it gives error 131
Ok, I searched google on your behalf
Error 131 means you are trying to install an ruu not ment for the region of your phone, the solution is to either install the correct Rom for the region of your phone or make a goldcard, however at this point the website to make goldcard is not running.
There is however a backdoor to make goldcard that might work, look in this thread http://forum.xda-developers.com/showthread.php?p=41527043 and have a read.
Sent from my HTC Desire HD using xda app-developers app
ranger4740 said:
Ok, I searched google on your behalf
Error 131 means you are trying to install an ruu not ment for the region of your phone, the solution is to either install the correct Rom for the region of your phone or make a goldcard, however at this point the website to make goldcard is not running.
There is however a backdoor to make goldcard that might work, look in this thread http://forum.xda-developers.com/showthread.php?p=41527043 and have a read.
Sent from my HTC Desire HD using xda app-developers app
Click to expand...
Click to collapse
thankyou
my phone is voda from outside
and i need to have arabic included for necessary
i will check for the gold card if possible..
i made the gold card and put the rom on it and rename to LEGEIMG.ZIP
in the hboot after loading zip nothing happened why?
i got now CID incorrect
What what what? Isn't that an ruu, you run it on a windows pc with phone connected, it's not a Rom you flash with recovery or legeimg.zip
Sent from my HTC Desire HD using xda app-developers app
ranger4740 said:
What what what? Isn't that an ruu, you run it on a windows pc with phone connected, it's not a Rom you flash with recovery or legeimg.zip
Sent from my HTC Desire HD using xda app-developers app
Click to expand...
Click to collapse
i didn't get u
it is rom.zip renamed to LEGEIMG and put on sd card to flash
wht is the problem?
thank you all it is done and works now )))))))
mofanofa said:
thank you all it is done and works now )))))))
Click to expand...
Click to collapse
Could you have some decency and tell us how?