Hi can anybody help me.
I just bought Samsung Galaxy Note LTE from Singtel Singapore
and when i check on my galaxy note version i got
Model : GT-N7005
Android Version : 4.0.4
Baseband : N7005DXMA1
Kernel Version : 3.0.8-1146594
[email protected] #1
SMP PREEMPT Tue Oct 16 17:22:36 KST 2012
Version Number : IMM76D.DXLJ2
Which root method i can use safely on my galaxy note lte ?
jiprudy said:
Hi can anybody help me.
I just bought Samsung Galaxy Note LTE from Singtel Singapore
and when i check on my galaxy note version i got
Model : GT-N7005
Android Version : 4.0.4
Baseband : N7005DXMA1
Kernel Version : 3.0.8-1146594
[email protected] #1
SMP PREEMPT Tue Oct 16 17:22:36 KST 2012
Version Number : IMM76D.DXLJ2
Which root method i can use safely on my galaxy note lte ?
Click to expand...
Click to collapse
I'm following this method and now my phone rooted
http://rootgalaxynote.com/galaxy-no...y-note-sgh-i717-icsgingerbreadeasiest-method/
Be sure to follow the ICS instructions -- many have followed the GB side, by accident or inattention. Flashing the wrong kernel puts your phone into endless bootloops.
That link doesn't seem to flash a kernel.
Looks like it does it the way I would suggest
Flash a custom recovery then just flash a root.zip in said recovery.
Which works no matter what version of android you're running.
But, not dishing your advice, good looking out.
And in fact.. op if you're planning on running a custom Rom... you can skip the flashing of that root.zip and just flash the desired Rom you want.
The rom will be rooted once it boots.
Only reason to root first, would be to run titanium backup.
I'm glad you explained that. It makes sense the stock recovery partition that gets replaced/rewritten is separate from the kernel. I made a bad assumption because to root and get the custom recovery I flashed a kernel .tar file with Odin.
rangercaptain said:
Be sure to follow the ICS instructions -- many have followed the GB side, by accident or inattention. Flashing the wrong kernel puts your phone into endless bootloops.
Click to expand...
Click to collapse
Thanks, this is so very important !
cheers
Related
Hello,
I ve just got this phone http://www.ebellking.com/cell-phones/android-phone/feiteng-gt-i9300-android-smart-phone
http://www.everbuying.com/product196616.html
Baseband I9300XXLEF
Kernel May 23
Build IMM76D.I9300ZSALED
The problem is Titanium, Battery Calibration say the phone is not rooted but Barclays applications doesnt want to install cos it says the phone is rooted.....
Dont know what to do
Does anyone know how to root it properly?
Cheers
Did u try tpsparkyroot? this should work for mt6575. i have gt-i9300 cpu smdk4x12 :
Model number
GT-I9300
Android Version
4.04
BAseband version
MAUI.11AMD,w11,50,SP,V20,2012/08/13 14:56
Kernel version
3.0.13 1211V12 Wed Aug 22 17:26:11 CST 2012
Build Number
IMM76D.I9300ZSALE9
Custom build version
1345627582
simkad said:
Did u try tpsparkyroot? this should work for mt6575. i have gt-i9300 cpu smdk4x12 :
Click to expand...
Click to collapse
No, you? Did you manage to root your device with this method?
Yes im rooting my phone with tpsparkyroot.. my device is gt-19300 cpu smdk4x12.. same with ur phone? if its based on mt6575 tpsparkyroot method
can be use.. search google for it.
or try this method : http://forum.xda-developers.com/showthread.php?t=1886460
How to check if I got this - smdk4x12?
Did you use this method of rootin? http://forum.xda-developers.com/showthread.php?t=1646544 ?
I use antutu benchmark.. smdk4x12 ( actually is mt6575 cpu ) thickness of my phone is 8.6mm.
from the link u post, i think our phone is different model.. my phone dont have speaker grill at the bottom back. but ur phone is mt6575..
Ive try the rooting method http://forum.xda-developers.com/show....php?t=1646544 but not success.. Using tpsparkyroot and get root. i suggest u use tpsparkyroot method first as many mt6575 user success using it.
I try to help as much as i could, hope u successfully root ur phone.
tohon
that phone seems can't root
http://forum.xda-developers.com/showthread.php?t=1886460 Method 1, the phone has been rooted, easy! cheers
i9300 Plus S3 4.8inch Capacitive Screen 1Ghz MTK6575 Android 4.0 3G GPS WIFI 8.0 Pixel Camera Phone
this model rom have
Firmware for IMM76D.I9300ZSALE9
DO ANYBODY know how to get Firmware for below :-
Model number
GT-I9300
Android Version
4.04
BAseband version
MAUI.11AMD,w11,50,SP,V20,2012/08/13 14:56
Kernel version
3.0.13 1211V12 Wed Aug 22 17:26:11 CST 2012
Build Number
IMM76D.I9300ZSALE9
Custom build version
1345627582[/QUOTE]
harrisdaniel said:
DO ANYBODY know how to get Firmware for below :-
Model number
GT-I9300
Android Version
4.04
BAseband version
MAUI.11AMD,w11,50,SP,V20,2012/08/13 14:56
Kernel version
3.0.13 1211V12 Wed Aug 22 17:26:11 CST 2012
Build Number
IMM76D.I9300ZSALE9
Custom build version
1345627582
Click to expand...
Click to collapse
[/QUOTE]
tell me if you get it plz i need it too
try this
narod.ru/disk/61342868001.803db61055a649e1b2c6b9d84a616193/MTKdroidTools_v228.exe.html
4shared.com/zip/DjiLvkvl/Taiwan101-FeiTeng-i9300_ICS_V0.html
Hello guys!
I recently bought this phone: Feiteng GT-I9300 MTK6575 like the one here:
http://www.aliexpress.com/store/prod...615460960.html
Then I flashed it with SP Flash Tool. The phone turn on well and I have access to the recovery mode. The problem is I can't use my touch panel and the menu and back keys! only physical keys work. So I'm stocked at the slide page!
Do anybody have the same phone?
If so is it possible to have a backup of this phone with all necessery files by using this posts?:
- backup: http://forum.china-iphone.ru/viewtop...609028#p609028
- .bin files: http://forum.xda-developers.com/show...285573&page=10
thanks to help me please!
________________________
My phone:
Model number: GT-I9300
Android version: 4.04
Baseband version: I9300XXLEF
Kermel version: 3.0.15-570657-user
[email protected]#1
SMP PREEMPT Wed May 23 09:05:19
KST 2012
Build number: IMM76D.I9300ZSALED
In Need for the Official Firmware
HI All,
While fixing Play Store and Installing GTalk I have briked this phone so could you please provide me the links wherein i can flash the official firmware for "mt6575 maui.11amd.w11.50.sp.v20,2012/08/13"
Thanks,
John
I cannot root that FeiTeng GT-I9300 ph
Hi all,
is there anyone who can help me to root that phone?
Model - GT-I9300, Android version - 4.0.4, Baseband version -MAUI.11AMD.W11.50.SP.V20, 2012/08/13 14:56, Kernel version - 3.0.13 1211 V28 Tue Sep 25 12:43:35 CST 2012, Build number - IMM76D.I9300ZSALE9, Custom build version - 1348481485
I want to root this and update into JB. is it possible?
If so, plz let me know how to do it.
Thanks in advance!
notwo said:
Hi all,
is there anyone who can help me to root that phone?
Model - GT-I9300, Android version - 4.0.4, Baseband version -MAUI.11AMD.W11.50.SP.V20, 2012/08/13 14:56, Kernel version - 3.0.13 1211 V28 Tue Sep 25 12:43:35 CST 2012, Build number - IMM76D.I9300ZSALE9, Custom build version - 1348481485
I want to root this and update into JB. is it possible?
If so, plz let me know how to do it.
Thanks in advance!
Click to expand...
Click to collapse
This is how I rooted my S3 i9300 mtk6577 you can try this but with caution and at your own risk.
- Install the MTK6577 usb drivers http://www.4shared.com/rar/0MvyztbR/...oid_ZTE_.html? cau2=403tNull
- Download the rooting .rar file (v2) from http://forum.xda-developers.com/show....php?t=1886460
- Enable USB-Debug option from settings and Close all apps;
- Connect the phone to USB and click RunMe.bat file and select option 3
- Click Restore option on mobile to backup data.
- Mobile should reboot twice and the command prompt on ya PC shows this msg: "Successful, going to reboot your device!"
Install RootChecker from play store and verify the phone is rooted or not.
Install TitaniumBackup from play store and take full backup.
Use "Root App Delete" from play store to delete Chinese apps
PS do this with caution.
simkad said:
I use antutu benchmark.. smdk4x12 ( actually is mt6575 cpu ) thickness of my phone is 8.6mm.
from the link u post, i think our phone is different model.. my phone dont have speaker grill at the bottom back. but ur phone is mt6575..
Ive try the rooting method http://forum.xda-developers.com/show....php?t=1646544 but not success.. Using tpsparkyroot and get root. i suggest u use tpsparkyroot method first as many mt6575 user success using it.
I try to help as much as i could, hope u successfully root ur phone.
Click to expand...
Click to collapse
Hi Simkad,
Do you have orignal ROM, can upload
My phone info is attached.
can we remove chinese apps ?
and i have trouble with playstore ( no connection )
mon2oo said:
This is how I rooted my S3 i9300 mtk6577 you can try this but with caution and at your own risk.
- Install the MTK6577 usb drivers http://www.4shared.com/rar/0MvyztbR/...oid_ZTE_.html? cau2=403tNull
- Download the rooting .rar file (v2) from http://forum.xda-developers.com/show....php?t=1886460
- Enable USB-Debug option from settings and Close all apps;
- Connect the phone to USB and click RunMe.bat file and select option 3
- Click Restore option on mobile to backup data.
- Mobile should reboot twice and the command prompt on ya PC shows this msg: "Successful, going to reboot your device!"
Install RootChecker from play store and verify the phone is rooted or not.
Install TitaniumBackup from play store and take full backup.
Use "Root App Delete" from play store to delete Chinese apps
PS do this with caution.
Click to expand...
Click to collapse
I think it's a dump question but i will ask.Do you know how to install drivers becouse i tryed with no luck.I tryed with device manager and no luck.Please help
S3 clone Singal SIM (Micro SIM) ROM upgrade
S3
single SIM micro sim
GT -I900
android Ver "4.1.1"
base band "I9300xxLH1"
base band Ver "MAUl.11AMD.W11.50.SP.V12.2012/09/20 18:56"
kernel "3.0.13"
Build no "ALPS.ICS.MP.2.6"
custom build ver 008511107
modem 6575
After reset log change from Samsung to Welcome. dial *#2013# original logo will be back
1) Where can i download correct rom or upgraded rom? Scared to upgrade
2) GPS not working. Any solution?
3) Win xp not identifying modem65xx.can some one help
Hey there,
After 2 years I've decided to root my SGS2, Ive been through flashing with nokia's and that kind of things. However, Im a total NOOB in android rooting.
My problem is the following:
I've updated my phone to ICS 4.0.4 (biggest mistake of my life).
Now I've searched everywhere to find a root manual for my Firmware-version, but I keep coming up with german sites (I'm Dutch).
Google translate does its work like a piece of sh**, so I've lost all of my faith.
After some crappy translating, I read something about a hard-brick of this firmware.
My question is: Wich version is safe to root on my phone?!
Info about my phone:
Carrier: T-mobile
Model: GT-I9100 (ofcourse)
Android version: 4.0.4
Baseband version: I9100BOLP7
Kernel version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT Fri Aug 24 17:36:36 KST 2012
Build number: IMM76D.BOLPM
I hope my question isn't a dumb one, if so, I'm sorry!
soulcap said:
Hey there,
After 2 years I've decided to root my SGS2, Ive been through flashing with nokia's and that kind of things. However, Im a total NOOB in android rooting.
My problem is the following:
I've updated my phone to ICS 4.0.4 (biggest mistake of my life).
Now I've searched everywhere to find a root manual for my Firmware-version, but I keep coming up with german sites (I'm Dutch).
Google translate does its work like a piece of sh**, so I've lost all of my faith.
After some crappy translating, I read something about a hard-brick of this firmware.
My question is: Wich version is safe to root on my phone?!
Info about my phone:
Carrier: T-mobile
Model: GT-I9100 (ofcourse)
Android version: 4.0.4
Baseband version: I9100BOLP7
Kernel version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT Fri Aug 24 17:36:36 KST 2012
I hope my question isn't a dumb one, if so, I'm sorry!
Click to expand...
Click to collapse
dwnld the .tar file of the latest siyah kernel and flash the same thro 'ODIN' to root ur phone
since custom kernels like siyah are safe without any brick bug
Sun90 said:
dwnld the .tar file of the latest siyah kernel and flash the same thro 'ODIN' to root ur phone
since custom kernels like siyah are safe without any brick bug
Click to expand...
Click to collapse
Allright! that's a quick awnser!
I'll look into it! Many thanks!
Im still not sure wich one I should use, the siyah version I've found is from May, is that a good version?
And how about this one: http://forum.xda-developers.com/showthread.php?t=1804619
I wanted to know If I could get this on my phone!
Thanks in advance!
soulcap said:
Im still not sure wich one I should use, the siyah version I've found is from May, is that a good version?
And how about this one: http://forum.xda-developers.com/showthread.php?t=1804619
I wanted to know If I could get this on my phone!
Thanks in advance!
Click to expand...
Click to collapse
check the link below for the latest Siyah kernel ma8
SiyahKernel S2-v4.1.5
and for that rom link u posted, Yes u can install the same after u have rooted ur phone successfully though
I too have this same problem. I have the following stats:
Carrier: AT&T
Model: GT-I9100
Android version: 4.0.4
PDA: I9100BULPG
Phone: I9100BULP8
CSC: I9100VODLPB
Baseband version: I9100BULP8
Kernel version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT Thu Sep 13 10:45:25 KST 2012
Build number: IMM76D.BULPG
I want the Siyah kernel, but before I can flash that, I need root! Chainfire hasn't made the file that roots this specific firmware yet, so how do I root it?
Many Thanks
FirebirdStud said:
I too have this same problem. I have the following stats:
Carrier: AT&T
Model: GT-I9100
Android version: 4.0.4
PDA: I9100BULPG
Phone: I9100BULP8
CSC: I9100VODLPB
Baseband version: I9100BULP8
Kernel version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT Thu Sep 13 10:45:25 KST 2012
Build number: IMM76D.BULPG
I want the Siyah kernel, but before I can flash that, I need root! Chainfire hasn't made the file that roots this specific firmware yet, so how do I root it?
Many Thanks
Click to expand...
Click to collapse
Flashing Siyah will also root your phone. Just make sure you use the correct version of Siyah for your model and version of Android.
You do not need to root your phone to flash Siyah kernel.
When you flash Siyah you will get root. Here's what you do:
#download siyah kernel
#Boot phone to download mode
#Open Odin and connect phone
#put siyah kernel .Tar file in PDA section of Odin.
#click start.
It is extremely difficult to brick your phone flashing a kernel in Odin.
Good luck
Sent from my GT-I9100 using xda app-developers app
Thanks! I used the PhilZ method before seeing this, and worked great!
Hi their all im matt
what it is i have the samsung galaxy s3 i9300 i bought it from carphone warehouse a while back in london (uk obviously) on sim only, so it wasnt branded etc.
Anyway shortly after a while i wanted to root it as i heard about all the benefits etc, so i used the samsung toolkit 7.0 and it rooted fine
anyway for some reason i ened up unrooting it i cannot remember why but i did, and now my device status shows as MODIFIED, and the OTA updates does seem to work as it just says searching but does nothing, ( im guessing this is because i unrooted and the device status says modified)
but before i rooted in the first place i never wrote down what firmware was on the model ( obviously the stock rom but i dont know what rom it was seen as i bought it from carphone warehouse in the uk)
but i wish to root my mobile again but also have the stock rom what came with the actual phone installed.
the rom information on my mobile is :
andorid version: 4.1.2
Baseband version: i9300XXELKC
Kernal version: 3.0.31-742798 [email protected] #1 SMP PREEMPT SAT DEC 22 17:04:04 KST 2012
Build number JZO54K.I9300XXELKC
can anybody tell me if this is the stock rom that came on my phone when i bought it from carphone warehouse or did i do something wrong when i rooted it in the first place and its installed some other rom. as i just want the stock rom and be able to update as normal but be rooted and device status to be OFFICAL and not MODIFIED
hope somebody can help me with step-by-step instructions
thank you
I've rooted and unrooted a few times, and yes because it says modified you are unable to update. The easiest way and the way i have previously done it was download
http://forum.xda-developers.com/showthread.php?t=1703488
and run the flash stock via Odin, this will download a stock firmware which it will then install. Follow the steps to the letter though.
Ive managed to update via kies previously and had an OTA update for it too.
The Uk unbranded firmware version is BTU, if it asks and i believe if you install XXELLA it will then update via kies.
Hi i used the samsung toolkit v7.0 like you said and ODIN loaded up and used the flash thingy but it does nothing to my mobile.
it still says
andorid version: 4.1.2
Baseband version: i9300XXELKC
Kernal version: 3.0.31-742798 [email protected] #1 SMP PREEMPT SAT DEC 22 17:04:04 KST 2012
Build number JZO54K.I9300XXELKC
in the about device.
so what firmware should be on my galaxy s3, if i bought it from carphone warehouse in uk should it be BTU or ELLA
arnie2012 said:
Hi i used the samsung toolkit v7.0 like you said and ODIN loaded up and used the flash thingy but it does nothing to my mobile.
it still says
andorid version: 4.1.2
Baseband version: i9300XXELKC
Kernal version: 3.0.31-742798 [email protected] #1 SMP PREEMPT SAT DEC 22 17:04:04 KST 2012
Build number JZO54K.I9300XXELKC
in the about device.
so what firmware should be on my galaxy s3, if i bought it from carphone warehouse in uk should it be BTU or ELLA
Click to expand...
Click to collapse
BTU is the country code for the firmware. Basically a uk firmware has BTU on it. ELLA is the firmware version. I flashed that one and it was 06 on the selection screen from that toolkit. I managed to do firmware upgrade OTA successfully.
Now that odin has finished does it still say modified?
Sent from my GT-I9300 using xda app-developers app
ok iv downloaded and flashed a rom im beliving is the correct one now it says
android version 4.1.2
baseband version i9300XXELLA
Kernal version 3.0.31-742798 [email protected] #1 SMP PREEMPT sat Dec 22 17:04:04 KST 2012
Build number - JZ054K.I09300XXELLA
under device status, it still says modified
i loaded up Kies and now it says, the firmware i have on my s3 is not supported to recieved updates through kies
i try OTA updates and it just loads nothing happens
before i downloaded this rom i have on now, i followed all your previous intructions and i flashed 06 form the selection but it doesnt do anything to my phone
what is happening i dont understand, thank you i appreciate your time helping me to get my mobile back to normal
Im at work till 9 but I'll try and run the flasher and set mine back to stock to see if I can run the update afterwards.
Like I said ive done it before so unless they have changed something in one of the updates to ELLA it shluld bw working. Ill post again once ive done it and let you know
Sent from my GT-I9300 using xda app-developers app
reset phone
right i heard about a csc changer and as you said before my samsung galaxy s3 should be on BTU, but it appears it wasnt, it looked like it was on XEO.
so i installed csc changer from the google play and it reset my mobile.
device status: says normal,
in download mode, everything is offical again.
but im not rooted
how do i get my mobile rooted without anything changing to custom again
not: i backed up all my apps via titanium
Im pretty sure rooting your device changes it back to modified as its flashes a new image.
Triangle away by chainfire can reset the flash counter so possibly give that a try.
Sent from my GT-I9300 using xda app-developers app
hi. i'm a newbie
i need a solution for my thread
its very painful if you installing a new roms and got " NO SERVICE "
i'm using samsung galaxy grand duos gt-i9082l
help me please !! i need a savior for my phone
baseband version I9082LUBAMA6
kernel version 3.0.31 -1262039
[email protected] #1
SMP PREEMPT Thu Jun 13 20:16:26 KST 2013
Build number JZO54K.I9082XXAMF7
need you help ASAP :crying:
Welcome to my nightmare...
you have to accept that, when dealing with custom roms
flash a different one..
wait for an update
build your own
IT'S ALL ABOUT CHOICES my friend
You need to flash with odin app (for using Odin, please use a search engine) modem_xxxxxx_.tar file for your country and your operator, using the "Phone" button.
You may need to flash a CSC file for your country or region.
Hey, contact your nearest Samsung repair center. Hope they can resolve your problem as soon as possible.
k2wl
@k2wl hello big boss , need your help in my thread
i'm using samsung galaxy gran duos gt-i9082L
reply ASAP please
fergaapriandry said:
hi. i'm a newbie
i need a solution for my thread
its very painful if you installing a new roms and got " NO SERVICE "
i'm using samsung galaxy grand duos gt-i9082l
help me please !! i need a savior for my phone
baseband version I9082LUBAMA6
kernel version 3.0.31 -1262039
[email protected] #1
SMP PREEMPT Thu Jun 13 20:16:26 KST 2013
Build number JZO54K.I9082XXAMF7
need you help ASAP :crying:
Click to expand...
Click to collapse
Hello,
i had this same problem. Maybe you only forget wipe data before instalation of new ROM. When i made wipe and reset to factory settings, i got my operator
May be your ROM is not supporting the current baseband
Please check and install the correct baseband version for you ROM. I had the same problem when I first installed a custom rom in my LG optimus p500. Once I installed the correct baseband I go the signal
fergaapriandry said:
hi. i'm a newbie
i need a solution for my thread
its very painful if you installing a new roms and got " NO SERVICE "
i'm using samsung galaxy grand duos gt-i9082l
help me please !! i need a savior for my phone
baseband version I9082LUBAMA6
kernel version 3.0.31 -1262039
[email protected] #1
SMP PREEMPT Thu Jun 13 20:16:26 KST 2013
Build number JZO54K.I9082XXAMF7
need you help ASAP :crying:
Click to expand...
Click to collapse
Flash a compatible kernel. That should do it
This is the best fix for no service after flashing rom
Steps are as follows:
(1) Make sure you are connected to wifi
(2)Open Google Play Store
(3) Search "Whatsapp"
(4)Install the app
(5) Open it
(6) Signup with your phone number.(Phone number does not display in settings but you should know it)
(7)Its gonna verify with a text message(Phone must be in service)
(8) Its gonna verify and open
(9)Whatsapp is a running app and it configures your phone better than any other method.
**Second Option is to get someone to text and call**
Hello guys. My device used hyperdroid 7 androidmeda before then I decided to flashed to Cyanogenmod 10.2 yesterday but some problem popped up. My GS2 can't find any signal, IMEI disappeared from "About phone". I tried many ways to solve it but all had failed so I flashed again with 4.0.4 base rom (I9100DXLPF - Thailand) successfully and got my IMEI appeared again with full phone signal. Now I'm planning to flash it to ERobot version 24(android 4.0.4) since it's quite popular in my country and that leads to my question
1. Since I flashed 4.0.4 base rom does that mean my device got unrooted?
2. If it's unrooted then should I flash Siyah kernel 5.0.1 through Odin to get it root again?
3. Does Siyah kernel already has CWM? or do I have to flash CWM in later?
4. In the case that ERobot rom can't function like I expect it to and I might want to go back to hyperdroid 7 which has android version 2.3.6 can I just use "install zip from SDCard in CWM" because at the time I should have CWM in already and with Siyah kernel.
My current device
Model number : GT-I9100
Android Version : 4.0.4
Baseband Version : I9100DXLPB
Kernel Version : [email protected] #3 SMP PREEMPT Thu Aug 23 13:50:48 KST 2012
Build number : IMM76D.DXLPF
also I got my IMEI back just from flashing this base rom
Thank you in advance