Hi there...
I looked but couldn't find these combination...i mean: XWLSD + Siyah-s2-v6.0b4 + Chainfire3D.
Ok, so this is what it happened:
Yesterday i flashed XWLSD on my i9100 , and everything went smooth, all my apps were there, and all my configurations.
So today i flashed a custom kernel, Siyah-s2-v6.0b4, in order to root my phone, and again, everything went well.
The problem came when i remember that i got the ChainFire3D Drivers to install and play some games.
In the minute i tried to install them, my SGS2 turn off, and when i tried to turn it on again, i got a boot loop. All i got is the SAMSUNG GALAXY SII screen, and after that, the phone just turns off again.
I'm able to enter in recovery mode and also into download mode.
So , what i need to know is that, if i flash again my XWLSD ROM i can fix the problem, or do i need to do a full wipe first, or if there's some other way to do this.
Chainfire 3d of i remember right are only for gb, not ics and jb.
Galaxy powered by GM @ Dorimanx
Odp: [Q] SGS2 Bricked?? XWLSD + Siyah-s2-v6.0b4 + Chainfire3D
Reflash rom again, and don't use C3d
TeamXD: Official Beta Tester
Phone: Samsung Galaxy S II
Mods: AC!D, Camera by Jobnik
Rom: NeatRom Lite
Kernel: Stock
Battery: Stock 1650
Send via: Tapatalk
Related
Hello everybody. I have a i9100 with pda: xwlpy, phone: xxlq6, csc: neelp6 on stock 4.0.4 and Dorimanx 5.92 kernel.
Untill now i didn't want CM because of the dialer (really like the Samsung dialer) and other small things, but now i want a clean, fresh install and start.
So i was wondering, can I install this stock LSJ 4.1.2, then root it (or should i install it with mobile odin and try to keep root? i preffer via pc but root is a must), then install Dorimanx 7.26 kernel with mali and then as a second rom this CM 10 4.1.2 ? Then i'll switch dorimanx to battery mode because i'm not that much into gaming.
Are this the latest releases? Any advice before i start working ? (now i'm downloading for ages the stock 4.1.2)
You can root LSJ but not with Dorimax kernel.
You cant use dual boot option (yet).
Yes XXLSJ is latest release.
ok, is that 4.1.2 stock recommanded or another download
dotuletz said:
ok, is that 4.1.2 stock recommanded or another download
Click to expand...
Click to collapse
that stock 4.1.2 is a leaked test version and not a official samsung release for u
hence try some other stable Stock ICS 4.0.3 versions for now, till a official JB released from samsung
hm... any eta for that ? that would be great but i'm afraid i'll have to wait some months and move to another country, so i'll have little access to a pc to get in download mode and everything to make a really clean install
hi
I want to dual boot two JB roms on my phone
I tried several krenels (ex siyah 5.0 & Dorimanx 7.38) it just install the second rom successfully but after reboot no any roms are booting its go in a loop and replays samsung logo for the two roms ...
i running VK 6.4 rom as a primary rom and tried Omega & Armageddon as second but have the same problem
so is there a way to dual boot two jb roms on gt-i9100 ?
Thank you & Sorry For my English
Is the same thing with me ROM (with Dorimanx 7.38) and the CM10.1. I think the leak of Samsung isn't compatible with the dual boot.
I've never tried dual booting before (im still a very lite noob user of my phone) but i'd like to give it a try. I currently have Neatrom Lite 4.0 with Dorimanx 7.38 (i think thats the latest?) and i'd like to installing either another Sammy based ROM such as AllianceROM or an AOSP/AOKP (i still dont know the difference) such as Resurection Remix or JellyBam.
I read this guide and it seems easy enough but aftre doing a search i also found this thread which report problems with JB and Dorimanx dual booting.
am2010r said:
hi
I want to dual boot two JB roms on my phone
I tried several krenels (ex siyah 5.0 & Dorimanx 7.38) it just install the second rom successfully but after reboot no any roms are booting its go in a loop and replays samsung logo for the two roms ...
i running VK 6.4 rom as a primary rom and tried Omega & Armageddon as second but have the same problem
so is there a way to dual boot two jb roms on gt-i9100 ?
Thank you & Sorry For my English
Click to expand...
Click to collapse
RM57380 said:
Is the same thing with me ROM (with Dorimanx 7.38) and the CM10.1. I think the leak of Samsung isn't compatible with the dual boot.
Click to expand...
Click to collapse
Anyone have any advice?
Thanks
7.40 is latest. http://dorimanx.shine.sk/
Can't dual boot with NeatROM JB for now.
You can dual boot 2 ICS ROMS (NeatROM UHLPZ & something else) using Dorimanx 5.92
*NeatROM* Its Neat, and its a ROM!
Same issue here...
[Almost] Same issue here:
Phone: SGSII I9100
Kernel: Dorimanx 7.44
1st ROM: CM10.1 (2013 Jan 28 build). Boots perfectly
2nd ROM: Omega ROM 19.1 (2013 Jan 23 build). Loops....
Hello Xda,
PROBLEM SOLVED
i have some weird problems with my player 3.6 EU model (physical home button)
Yesterday i was on stock XXLH3 Rom with CWM kernel from Zaclimon and decided to go back to my S3specialrom rom that is based on XXLH3 after flashing that it booted up fine but every app i clicked begin to force close so i flashed back to my flashable stock XXLH3 rom and after that no problems but this morning i booted up my player and i decided to flash back with odin to XXLD1 and after that flashed CWM XXLH3 but now the problems begin
- No lockscreen
- Home button doesn;t respond to anything i do
- power off menu only show shutdown
I have never seen this problem before and flashing other kernels or roms doesn't solve this.
Any help?
Greetings SK
Device info:
Galaxy Player: 3.6 (EU)
Android version: 2.3.6
Rom version: XXLH3
Kernel: XXLH3 with CWM
Hi,
I installed V14 Temaseki's V14 on my samsung galaxy sIII version, and it installs normally, but when enter on the first cyanogenmod page, the touchscreen doesn't work!!!
I already tried to back to 10.1.3 CM official version but the touch still doesn't work!!
What to do?
Regards,
Flash stock with Odin and test.
correiaguilherme said:
Hi,
I installed V14 Temaseki's V14 on my samsung galaxy sIII version, and it installs normally, but when enter on the first cyanogenmod page, the touchscreen doesn't work!!!
I already tried to back to 10.1.3 CM official version but the touch still doesn't work!!
What to do?
Regards,
Click to expand...
Click to collapse
Try flashing stock firmware from odin and check whether the screen works or not.. if it still does not work in stock firmware than maybe its a digitizer failure but it shouldn't be because it has just stopped working after flashing CM 11.. First try to flash Stock Firmware abd see what happens..
I installed the stock version and the touch still doesn't work!
what should i do?
The 2 buttons(Menu and Back) works but the on the screen the touch doesn't work
=(
Hi
Now i discovered that i installed CWM for Galaxy i9500 - Do you guys think that i burned my digitizer for that?