Hello Xda,
PROBLEM SOLVED
i have some weird problems with my player 3.6 EU model (physical home button)
Yesterday i was on stock XXLH3 Rom with CWM kernel from Zaclimon and decided to go back to my S3specialrom rom that is based on XXLH3 after flashing that it booted up fine but every app i clicked begin to force close so i flashed back to my flashable stock XXLH3 rom and after that no problems but this morning i booted up my player and i decided to flash back with odin to XXLD1 and after that flashed CWM XXLH3 but now the problems begin
- No lockscreen
- Home button doesn;t respond to anything i do
- power off menu only show shutdown
I have never seen this problem before and flashing other kernels or roms doesn't solve this.
Any help?
Greetings SK
Device info:
Galaxy Player: 3.6 (EU)
Android version: 2.3.6
Rom version: XXLH3
Kernel: XXLH3 with CWM
Related
hello sory 4 bad my english
befor create this topick i'm search in the from and find many tapick with this problem but that's not give any result(not usefull)
my device is xperia mini
before install this rom my device is:
stock rom android 4 with unlocked boot loader and rage v3 keneral
i installed this rom (wrong use mini pro rom)via recovery and install extended stock keneral via flash tools
After turning on the phone's touch is not working properly.
But, back and menu buttons work well
I flash stock android 4 rom for solve this problem
But after flash touch not working
please help me for fix this problem
my works 4 fix touch
flash stock android 4 =touch not working
flash stock android 4 +flash keneral extended stock+install real ics=touch not working
flash stock gb 2.3 baseband 42=touch not working
flash stock gb 2.3 baseband 62=touch not working
install real ics rom sk15{mini pro}=soft key work fine but touch screen not work fine touch is not callibre
fash sotock ics 4 and flash krsh keneral and install real ics but touch not calibre
try to repair with . pc compain but touch not working
milad10 said:
hello sory 4 bad my english
befor create this topick i'm search in the from and find many tapick with this problem but that's not give any result(not usefull)
my device is xperia mini
before install this rom my device is:
stock rom android 4 with unlocked boot loader and rage v3 keneral
i installed this rom (wrong use mini pro rom)via recovery and install extended stock keneral via flash tools
After turning on the phone's touch is not working properly.
But, back and menu buttons work well
I flash stock android 4 rom for solve this problem
But after flash touch not working
please help me for fix this problem
my works 4 fix touch
flash stock android 4 =touch not working
flash stock android 4 +flash keneral extended stock+install real ics=touch not working
flash stock gb 2.3 baseband 42=touch not working
flash stock gb 2.3 baseband 62=touch not working
install real ics rom sk15{mini pro}=soft key work fine but touch screen not work fine touch is not callibre
fash sotock ics 4 and flash krsh keneral and install real ics but touch not calibre
try to repair with . pc compain but touch not working
Click to expand...
Click to collapse
have you tried rage kernel v 3.0 gb
Then wipe cach partition factory reset.
Then stock rom 2.3.4
Do this to fix your touch problem(100% works)
1:flash an stock 2.3.4 firmware
2:then flash a costum kernel and flash the real ics (mini pro version)
3:flash stock 2.3.4 rom again
i had the same problem and i fixed it with that method
Hi there...
I looked but couldn't find these combination...i mean: XWLSD + Siyah-s2-v6.0b4 + Chainfire3D.
Ok, so this is what it happened:
Yesterday i flashed XWLSD on my i9100 , and everything went smooth, all my apps were there, and all my configurations.
So today i flashed a custom kernel, Siyah-s2-v6.0b4, in order to root my phone, and again, everything went well.
The problem came when i remember that i got the ChainFire3D Drivers to install and play some games.
In the minute i tried to install them, my SGS2 turn off, and when i tried to turn it on again, i got a boot loop. All i got is the SAMSUNG GALAXY SII screen, and after that, the phone just turns off again.
I'm able to enter in recovery mode and also into download mode.
So , what i need to know is that, if i flash again my XWLSD ROM i can fix the problem, or do i need to do a full wipe first, or if there's some other way to do this.
Chainfire 3d of i remember right are only for gb, not ics and jb.
Galaxy powered by GM @ Dorimanx
Odp: [Q] SGS2 Bricked?? XWLSD + Siyah-s2-v6.0b4 + Chainfire3D
Reflash rom again, and don't use C3d
TeamXD: Official Beta Tester
Phone: Samsung Galaxy S II
Mods: AC!D, Camera by Jobnik
Rom: NeatRom Lite
Kernel: Stock
Battery: Stock 1650
Send via: Tapatalk
Hello,
I updated my phone to Omega Jellybean 4.1.2 rom and the wifi worked fine initially but now its stopped and it refuses to turn on.
I again updated to another custom rom (Omega jb AOKP milestone 4.2.2 rom) but it still doesn't work.
How can I fix this? Please Help!!!
Thanks
Wipe phone flash stock rom and test ,
Read the basic faqs and guides before flashing
Hello.
I have problem with dualboot. I try with two roms ( NeatRom 4.4 lite and x-treme jb ro v9).
I did:
1. I flash NeatRom 4.4 lite and kernel dorimanx 8.39.
2. In dual boot option I chose clone 1 to 2.
3. Wipe data and flash x-treme jb ro v9 and kernel dorimanx 8.39.
4. Restart.
Custom rom start normally but stock rom ( black screen or boot loop).
Please help me. Thanks.
Is neat rom a moded stock rom in 2nd rom and custom on 1st rom? Stock rom wont work as has to be moded to work. Also did you make two threads for one topic??
I9100/I9300
Hello,
My friend asked to update his Stock I9100 non rooted ICS (4.0.3) to KitKat, his phone reboots when data/wifi is turned on.
I have already downloaded CM11 M12, can i install the latest Can i flash philz_touch_6.48.4 (brickbug safe kernel) with stock 4.0.3 (i know it won't boot ICS) but then again come back to recovery and install CM11 M12?
Is this possible?
SOLVED
Working good!
I installed philz_touch_6.48.4 from Stock Recovery, then installed CM11 M12 + Gapps + Kernel-Lanchon-FPBug
Links:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9100/philz_touch_6.48.4-i9100.zip/
https://www.androidfilehost.com/?fid=95864024717066249