I am trying to select the 3G 850 band on my Galaxy Grand (I-9082L), and when I select the appropriate band via service mode, i get this:
MODEM RETURN ERROR
PLEASE TRY LATER!!
I am troubleshooting my phone, for I flashed a I-9082 firmware and lost the 3G, I cant find a I-9082L firmware so, if there is a way to solve this, please help. If you can point me to a 9082L firmware or compatible modem, please.
Peter
Got the same issue
Im stuck in this too, I already tried to flash with many ROMs and back to stock but it does not work, I tried this too: http://forum.xda-developers.com/showthread.php?t=2317298, it worked fine the first time then when I went back to stock it have the same problem, I tried with modems from different ROMS but I have no luck ;P
Related
Hi,
First post on XDA so bare with me on this.
Have flashed my TELUS Note 717D with a few different ROM's over the last few days. With the news that Sammy will be pushing out official ICS in the next week or so I am trying to get my Note A$S back to stock including the correct radio file.
This is where I have come unstuck. I have all the correct files but for some reason I can't get my LTE back. Yes it was working prior to my loading new ROM's and also after I went testing. Had the soft bricking issue yesterday & managed to get that resolved but since then no LTE nada.
Loaded the full TELUS recovery (found here http://forum.xda-developers.com/showthread.php?t=1585440 ) and then the TELUS kernel.
Still no LTE. I have the GB & ICS radio files & now can’t get the recover to load any zip files as I get a error at the first screen.
Any help would be greatly appreciated.
Mike
I went thru this yesterday... i
I flashed the ATT stock rom/system from these boards, then downloaded the three part Telus file..when assembled its about 1 Gb...
After flashing ATT, I cleared dalvik, flashed the Telus stock.. Then i did a factory reset, and i was back.
I'm still running a non stock modem file.. But all is functioning.
Sent from my SGH-I717D using XDA
getting LTE now?
Everything is working but the lack of LTE is missing.
I am in downtown Vancouver & out address has a in building LTE system so coverage is not a problem.
Can you confiem that you have LTE? do you have the isp.telus.com apn too?
Mike
still having issues
I can flash the AT&T ROM with no problems using odin. when I reboot into recovery I am getting a error that wont allow me to use the power button and select the reset option.
The power button works because I can press and hold to reboot the phone but the white triangle with ! mark is in the moddle of the screen. With out that I am unable to do the resetting & clearing of the cache.
Any thoughts?
telephonemike said:
I can flash the AT&T ROM with no problems using odin. when I reboot into recovery I am getting a error that wont allow me to use the power button and select the reset option.
The power button works because I can press and hold to reboot the phone but the white triangle with ! mark is in the moddle of the screen. With out that I am unable to do the resetting & clearing of the cache.
Any thoughts?
Click to expand...
Click to collapse
Yeah.. Unfortunately my skillset definitely into the "knows just enough to be dangerous" category..
What 'recovery' is currently in the phone? Stock recovery? A CWM type recovery? I ask because I had an issue once previously where the power button wouldn't let me select items.. but I was able to use one of the four soft buttons on the bottom front of the phone to execute the same command. Once it was the 'home' button.. on my current recovery software it's the search button oddly enough.
What happens when, from the phone dialpad after a normal boot, you key : *#2263# ?
Do you get the Band preference menu?
What's selected? What happens if you pick 4 (LTE) and then 7 (LTE ALL) ?
And have you done a factory reset on the phone after any of these flashes? (I didn't see where you had so I askl)
Lastly -- in the SETTINGS / WIRELESS & NETWORK / MOBILE NETWORKS menu.. do you have "NETWORK MODE" menu item that the stock Canadian i717 device has the AT&T device does not?
I'll add here as a postscript.. it may not matter ... if the update includes an updated radio file.. all this worrying over it may not much matter once the update comes?
knoxster said:
Yeah.. Unfortunately my skillset definitely into the "knows just enough to be dangerous" category..
What 'recovery' is currently in the phone? Stock recovery? A CWM type recovery?
I have CWM v5.5.0.4 installed which works but wont let me installed the radio file. Bombs out with errors.
When I flash the TELUS stock GB Kernel, I get the standard recovery which wont even let me see the radio file.
What happens when, from the phone dialpad after a normal boot, you key : *#2263# ?
I thought this was a At&t thing only? But that said I did try to the number and got a recorded annc saying that is was not a valid number.
Do you get the Band preference menu?
Yes I have the correct options and its set to use all the HSPA types & LTE too.
And have you done a factory reset on the phone after any of these flashes? (I didn't see where you had so I askl)
Yes I did the reset to factory in CWM after the At&t ROM flash and after I loaded the TELUS ROM too. I did had to load a different kernel to allow the CWM recovery but then installed the TELUS stock kernel after.
I'll add here as a postscript.. it may not matter ... if the update includes an updated radio file.. all this worrying over it may not much matter once the update comes?
Click to expand...
Click to collapse
Thanks for all the help so far
Mike
Well, I have the same CWM .. I can't flash any of the supposedly flashable CWM modem files.. errors out part way thru. Weird.
I'm uploading my Telus Stock image that I used to Google drive.. I'll pm you the link once its up.
Sent you the links.
Also -- I managed to get the Bell Radio CWM file loaded on my Telus device from the thread located in this forum. (STOCK BELL thread)
There is now a Rogers stock thread and hopefully they'll have a Telus thread that will have a modem file that loads as well as the Bell one did. I can't imagine the differences are that great.
success
we have LTE!!!
Huge thanks for your help here. Flashing the BELL LTE radio file has now enabled the LTE in my telus note.
A little embarrassing as I work at telus but shhhhhhhhhhhhhhhh.
XDA Dev site is the best for anything Andriod.
telephonemike said:
we have LTE!!!
Huge thanks for your help here. Flashing the BELL LTE radio file has now enabled the LTE in my telus note.
A little embarrassing as I work at telus but shhhhhhhhhhhhhhhh.
XDA Dev site is the best for anything Andriod.
Click to expand...
Click to collapse
Yay!... See? Occasionally the blond leading the blind .. something good can come from it!
Plus I managed to get my modem back to stock as well .. I was using that T769 modem that was tweaked for Note use.. and all the Telus CWM modem files I would try to flash in ...just errored out.
I talk to Rogers and apparently there's the 401 sim that's not lte capable. They told me to go back to the store to get the 403 sim with lte capable, maybe that should help fix the problem. I'll give an update tmr once I get the new sim.
Does anyone know where I can find the Rogers radio or modem file? I found the radio but it says installation aborted when I try to flash CWM. I flash the Rogers modem file and the log shows me a installation success but it's i717M which is Bell, not Rogers. Can anyone give me a proper Rogers working link? also, apparently Radio and Modem is the same thing, it's just people playing with words, or I'm I getting it wrong? Thank you.
andronikal659 said:
I talk to Rogers and apparently there's the 401 sim that's not lte capable. They told me to go back to the store to get the 403 sim with lte capable, maybe that should help fix the problem. I'll give an update tmr once I get the new sim.
Does anyone know where I can find the Rogers radio or modem file? I found the radio but it says installation aborted when I try to flash CWM. I flash the Rogers modem file and the log shows me a installation success but it's i717M which is Bell, not Rogers. Can anyone give me a proper Rogers working link? also, apparently Radio and Modem is the same thing, it's just people playing with words, or I'm I getting it wrong? Thank you.
Click to expand...
Click to collapse
Why do you ask when you have already posted in that thread?
http://forum.xda-developers.com/showthread.php?p=26232608#post26232608
Agoattamer said:
Why do you ask when you have already posted in that thread?
http://forum.xda-developers.com/showthread.php?p=26232608#post26232608
Click to expand...
Click to collapse
sorry. I wasn't sure I was at the right forum. should I delete the post? btw how do I get alert for reply that people made after me instead of bookmarking every page? Thanks.
Here is the link to the Rogers Modem, http://www.mediafire.com/?ol9yzmmjx8uayh5
you can always flash your modem using adb to push the back to the phone just follow this thread
http://forum.xda-developers.com/showthread.php?t=1506212
Thanks guys. I'll stick with the .zip files to flash in CWM for now as I'm not comfortable with adb yet. One missing letter and it can fail to boot or whatever...
Hi,
In my ignorance I loaded on the i9100 rom from Samfirmware XXLSJ, and it loaded ok. However the modem doesn't work. The symptoms are: connects ok to 3g network, however will not txt/make phone calls, the phone reports "not registered on network"
So, I tried flashing the XXLSJ JB again, this time with another modem, one that is supposed to be for the T variant, I'm in New Zealand by the way and use Telecom. Same deal.
No problem i thought, ill simply go back to an earlier official Telecom version on ICS. However, this now hangs on boot up on the S logo.I went back to an earlier one, that one also hangs. I went back to Gingerbread, that hangs on start up also on the S logo too.
So some questions:
Can i run jellybean and use some new modem?
If not, can i put it back to original 4.0.3 official firmware without it hanging?
I'm using Odin 3.07 to do the flashing.
Thanks in advance, i'll just be happy with a working phone at this stage :silly:
laserfist3000 said:
Hi,
In my ignorance I loaded on the i9100 rom from Samfirmware XXLSJ, and it loaded ok. However the modem doesn't work. The symptoms are: connects ok to 3g network, however will not txt/make phone calls, the phone reports "not registered on network"
So, I tried flashing the XXLSJ JB again, this time with another modem, one that is supposed to be for the T variant, I'm in New Zealand by the way and use Telecom. Same deal.
No problem i thought, ill simply go back to an earlier official Telecom version on ICS. However, this now hangs on boot up on the S logo.I went back to an earlier one, that one also hangs. I went back to Gingerbread, that hangs on start up also on the S logo too.
So some questions:
Can i run jellybean and use some new modem?
If not, can i put it back to original 4.0.3 official firmware without it hanging?
I'm using Odin 3.07 to do the flashing.
Thanks in advance, i'll just be happy with a working phone at this stage :silly:
Click to expand...
Click to collapse
Sorted, ran the old firmware back on from Telecom, went into recovery mode and did a factory reset. all seems better.
I run CM 10.1 on my phone, which had original specs: PDA:KG3 / PHONE:KE7 / CSC:KG1 (VNZ). I've been running those CM nightlies since about November 2012 with few problems, updating to new nightlies every few weeks to a month. I'd never flashed new radios - just the CM rom.
Starting a couple of months ago, I began to see a problem where my phone would drop cell service (no bars + empty triangle in the cell signal indicator) and rebooting was the only way to bring the cell signal back. This happened every couple of days, so was bearable. I figured something in the nightlies had caused a weird problem and that the CM devs/community would find and fix this.
After flashing a nightly last week, my phone wouldn't hold cell signal for more than an hour - sometimes not even that. Reboots fixed this but never permanently. I started to read about radios, modems, and RILs. hawkerpaul's post here was a great help. I found that my phone had the original KE7 radio but had a RIL of I9100XXLS8(2) - I presume from the CM rom? I flashed some new radios and have now gone through a series of the (matched) modem + RIL files in hawkerpaul's post above. In most cases I see the following behaviour:
Phone successfully finds network (Vodafone NZ) on boot
Trying to manually select a mobile operator fails (error when searching for networks)
Unable to successfully call out! Dialling stalls, and I can't hang up - only fixed by a reboot
How do I fix this immediate problem of not being able to call/receive calls? Seems like maybe I'm using a radio that doesn't work with Vodafone NZ - but I haven't seen any posts on what DOES work well with that network. I have the modem file to flash the original KE7 back again, but what should I do about the RIL file then? Not sure I have found an RIL for KE7 yet in my travels. Any help would be appreciated - and thanks!
To help me figure out where I went wrong, do the CM builds include the RIL, or is that something that could only get updated somewhere else? I know the rom doesn't change the modem but I suspect that XXLS8(2) RIL had to come from CM.
1) Don't mess with RIL's (You'll make it 'worse').
2) Check stock roms released by your telco. Find out which modems were bundled with those stock roms. Try those modems. If they don't help, look for stock roms released by other carriers which sold the the I9100T world-wide (check Samfirmware). Try the modems bundled with these roms. If they don't help, try any & every modem you can get your hands on.
If you've already flashed RIL's, you may well have created a bigger problem for yourself. You might want to do a clean install of stock as well for good measure if that's the case. The reason I stopped using CM9 (and never bothered with CM10) was similar issues that seem to have gotten introduced with a particular nightly & never went away (a fix was tried which benefited a very few problems who were having RIL problems but created problems for even more people who previously had no problems).
MistahBungle said:
2) Check stock roms released by your telco. Find out which modems were bundled with those stock roms. Try those modems. If they don't help, look for stock roms released by other carriers which sold the the I9100T world-wide (check Samfirmware). Try the modems bundled with these roms. If they don't help, try any & every modem you can get your hands on.
...You might want to do a clean install of stock as well for good measure...
Click to expand...
Click to collapse
I'm just about at this point. If I reinstall stock, will that reset my modem as well?
Thanks for the help - looks like I did definitely make things worse.
You'll end up with whatever modem is bundled with the stock rom, so probably use the most recent released by your carrier, then you can try other modems released by your carrier as per my PP. The rationale with that is you'd hope your carrier has tested the modems they bundle with their stock roms so they work in most places/at most times with their network. Doing a clean install of stock should fix anything funky messing around with RIL's may have done as well.
If you get no joy from those, proceed as per my PP (You might get other suggestions from other people as well).
Thanks for the help. I was able to flash the latest stock rom, which included baseband I9100XXLS8. This worked fine for making and receiving calls. I lasted a couple of hours with that stock Samsung firmware before I started to get itchy for Android 4.2 again, so I've now rooted and am going to try CM10 again, but at least this time I know not to touch the modem - and I'm confident I can get back to stock again if I have any problems! Many thanks!
Glad you've got connectivity back You can flash modems as much as you want, I'd just be wary of messing with RIL's unless it's as an absolute last resort (I.E you have no connectivity & you've tried every single modem. Too many people try them when their connectivity is fine in the mistaken belief they're going to get 8Mbps instead of 7.8Mbps downloads, I.E it wasn't broke in the first place), even then a clean install of stock & choosing the right modem will often fix the problems.
You're welcome Any dramas post to this thread again & I'm sure someone will help.
Similar problems with modem or radio
MistahBungle said:
Glad you've got connectivity back You can flash modems as much as you want, I'd just be wary of messing with RIL's unless it's as an absolute last resort (I.E you have no connectivity & you've tried every single modem. Too many people try them when their connectivity is fine in the mistaken belief they're going to get 8Mbps instead of 7.8Mbps downloads, I.E it wasn't broke in the first place), even then a clean install of stock & choosing the right modem will often fix the problems.
You're welcome Any dramas post to this thread again & I'm sure someone will help.
Click to expand...
Click to collapse
Hi and thanks in advance. I have a galaxy i9100 which shows the following information: PDA: i9100xwlsd - Phone i9100xxls8 - Csc i9100vnzls9. I installed via odin Android version 4.1.2 which made the phone work really well except that it kept dropping network service and signal strength. I replaced the sim which did seem to help but did not fix the problem totally. I also notice that the GPS will not find any satellites and just keeps searching for as long as I would let it. I have read various threads and it appears that this may be a modem problem? I have found that Vodafone NZ has released a modem which is i9100xxls9? Should I flash the modem file only in Odin and do you really think this would fix the problem. How would I flash the modem file. Would I do this through odin? Any help gratefully received.
Yes, first step is definitely to flash the modem which was released by your carrier for your region. If you can find a file which is Odin flashable then yes, try it. However most of the files are for flashing via CWM. Are you rooted? If not they won't work for you, in which case you'll have to search around for an Odin flashable version of LS9.
Just to check, you do have an i9100? Not an i9100t etc? Some variants require different modems.
Sent from a galaxy far, far away
Thanks again
Hopper8 said:
Yes, first step is definitely to flash the modem which was released by your carrier for your region. If you can find a file which is Odin flashable then yes, try it. However most of the files are for flashing via CWM. Are you rooted? If not they won't work for you, in which case you'll have to search around for an Odin flashable version of LS9.
Just to check, you do have an i9100? Not an i9100t etc? Some variants require different modems.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
Thanks for the response. How do I know if a file is odin flashable? How do you flash via cwm (whatever that is). You can see I am a little bit or a lot of a novice on this. The unfortunate thing is I enjoy it. I think the phone is rooted and it says the phone is: Model GT- i9100. The phone was purchased in UAE and I have flashed the android 4.1.2 which was a vodafone NZ system. Everything works fine except the GPS and the phone signal drops out all the time showing no service when there is service? Thanks again for your help on this. I have just found that the phone may not be rooted? I tried to install root manager but it indicated phone was not rooted?
Ok so no offence, you need to do a lot of reading for yourself. Reading is the key to successful (ie without bricking) modification of your phone.
For a start, if you've flashed stock then of course you will not have root. You don't need to have root to flash a modem. Have a look here:
http://forum.xda-developers.com/showthread.php?t=1656005
I'm not saying to flash that modem file. But that's how you do it, now you just need to find your file and flash it.
Sent from a galaxy far, far away
Hello everyone,
First of all i want to thank you for all this guides that i was trying to use here
So here's my story.
I got Samsung Galaxy S3 I9300 with bootloop issue so i decide to fix this by myself.
I was trying to install fimware using KIES but i doesn't fix my issue.
Then i was trying to search for right rom on several websites.
The right one and only working one was 4.0.4 with orange brand logo.
So i was excited that its finally working
Then i realize that my imei is null and my sim card is not working.
So i was trying to restore EFS using several tools and methods.
Finally i got it default IMEI 0049 but it was still not working.
My phone is not qualcomm based model so i cannot use nv item reader writer as it's required to edit IMEI
Even after applying phonutil patch my device is not being recognize as Qualcomm one.(because it's not)
So i was still looking for another way to change my imei manually as i have my original one on the box and under battery.
Finally I realized that i cannot make even Emergency calls it comes with message Out of service area.
So i was trying to apply few modem and radio updates to my phone but none of them are helping.
Anyone have similiar issue?
I have another Galaxy S3 that is working can i copy imei or whole system to my not working phone?
I know that after that i cannot use other device, but thats ok if its possible.
Rockafella71 said:
Hello everyone,
First of all i want to thank you for all this guides that i was trying to use here
So here's my story.
I got Samsung Galaxy S3 I9300 with bootloop issue so i decide to fix this by myself.
I was trying to install fimware using KIES but i doesn't fix my issue.
Then i was trying to search for right rom on several websites.
The right one and only working one was 4.0.4 with orange brand logo.
So i was excited that its finally working
Then i realize that my imei is null and my sim card is not working.
So i was trying to restore EFS using several tools and methods.
Finally i got it default IMEI 0049 but it was still not working.
My phone is not qualcomm based model so i cannot use nv item reader writer as it's required to edit IMEI
Even after applying phonutil patch my device is not being recognize as Qualcomm one.(because it's not)
So i was still looking for another way to change my imei manually as i have my original one on the box and under battery.
Finally I realized that i cannot make even Emergency calls it comes with message Out of service area.
So i was trying to apply few modem and radio updates to my phone but none of them are helping.
Anyone have similiar issue?
I have another Galaxy S3 that is working can i copy imei or whole system to my not working phone?
I know that after that i cannot use other device, but thats ok if its possible.
Click to expand...
Click to collapse
Have you tried patched modem and kernel? Did you read the guides on xda >> http://forum.xda-developers.com/galaxy-s3/general/ref-imei-efs-stuff-i9300-including-t2393289 << and no you cannot copy imei from another phone.
tallman43 said:
Have you tried patched modem and kernel? Did you read the guides on xda >> http://forum.xda-developers.com/galaxy-s3/general/ref-imei-efs-stuff-i9300-including-t2393289 << and no you cannot copy imei from another phone.
Click to expand...
Click to collapse
I tried everything from this guide.
Regarding patch:
4.0.4-I9300BVALE4 firmware is the only one working on my Samsung
Patched modem and kernel that i found and try it are XXUGMK6.
Maybe they are different one or dedicated to my firmware
Rockafella71 said:
I tried everything from this guide.
Regarding patch:
4.0.4-I9300BVALE4 firmware is the only one working on my Samsung
Patched modem and kernel that i found and try it are XXUGMK6.
Maybe they are different one or dedicated to my firmware
Click to expand...
Click to collapse
The reason you can't make calls is because at some point your phone software was on 4.3 this means your efs as changed to efs v2. Now because your current firmware is at 4.0.4 then your efs can't read this because 4.0.4 is efs v1. So you need to get a 4.3 stock rom onto your phone (I know you said only 4.0.4 works) but what are you using install firmware are you using Odin? If so what errors are you getting installing with Odin.
The patched modems and kernels are for 4.3 so they won't work on 4.0.4 or any other apart from 4.3
I was trying so many of them but its always ends with samsung logo loop it doesn' matter if i'm
do things like wipe cache, factory settings etc everytime its not working.
Even on 4.0.4 only this one rom is working.
Im always using ODIN, with KIES its always ends with samsung logo loop.
Rockafella71 said:
I was trying so many of them but its always ends with samsung logo loop it doesn' matter if i'm
do things like wipe cache, factory settings etc everytime its not working.
Even on 4.0.4 only this one rom is working.
Im always using ODIN, with KIES its always ends with samsung logo loop.
Click to expand...
Click to collapse
Ok a couple of things you could try (if you haven't already) I presume you have a custom recovery? Try flashing a custom stock 4.3 with recovery I suggest this >> http://forum.xda-developers.com/galaxy-s3/general/rom-sammys-stock-deodexed-rooted-t2585670 << This is as close to stock as possible but can be flashed with a custom recovery like Cwm,PhilZ,Twrp etc. You will also need to flash a 4.3 modem for this which is included in the thread. If the modem in the thread does not give you a signal (presuming the rom boots ) then keep the same custom rom but flash a patched modem and kernel on top with your custom recovery.
Don't forget to factory reset after flashing!
If none of that works you can always try the rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << obviously flash the 4.3 one. Hope that helps
Thank you very much for your help i will try this and let know here if it's working
Rockafella71 said:
Thank you very much for your help i will try this and let know here if it's working
Click to expand...
Click to collapse
So it's me again.
I have good news and bad news.
So i was able to install both of firmware with success.
After applying patched modem everything was still working.
But when im calling 112 for example im still having "out of service area" and my imei is still 004999...
So issue is still exist.
I can discover any network when i choose network its even says"registred on network" but then if im trying to choose some number im having error message that im not registred or if emergency call "out of service area".
Any ideas what still can i try ?
I had my s2 hard bricked and now i got a new motherboard for it, the thing is that on all stock roms (2.3 and 4.1.2) the phone works perfectly but all the custom roms 4.4 5.0 6.0 the cellular does not work, it gives me no service, tried flashing modem from cwm but no change.
i also tried different recoveries etc but custom rom no service
sometimes in custom rom imei used to be blank but it comes back after reboot, in stock no issues at all
any idea what im doing wrong or is there something up with the new board?
thanks,
Update
I was searching and I read somewhere that installing NeatROM by Sale will help, i downloaded and installed it, the good news is that cellular works and i have full 3G access.
Question: How to proceed further?
i could experiment but the thing is that if i flash a non-working rom (no cellular), i will have to flash stock from odin and start all over again
any ideas?
Update 2
i tried NeatROM and it worked perfectly, then i tried installing slimLP and boom, no service again, this time,my IMEI was blank too, so now i'm flashing stockrom again.
any idea anyone please?