If I switch back to stock and download the OTA will I lose root? If so I'm assuming if I re-root the way I did the first time I would be just canceling out the update. Would that be correct?
Sounds like you are rooted now. I would not doing anything. In the past I would let the update drop and not take it. It's only a matter of time before someone pulls what is needed from the official update and applies it to a rom. I feel it's just easier that way. You keep root and don't loose the freedom of trying new roms.
The ota has been out. The only difference is it is official and not leaked. Most, if not all the devs have updated their roms with the newer verision. If you download a signed ruu you will lose root, and there is no sure thing that the exploit has changed, thus making the older root process still usable.
Sent from my ADR6400L using XDA App
I am a little confused with the note, i see what i believe to be 4 different versions of it.
i have a stock rogers note, what rom can i use, what root method, what recovery, what kernel.
is mine the same as at&t and should just follow anything that is for the at&t version?
i don't see ics coming to rogers any time soon so might as well get it over with and flash ics.
as for warranty, i see a flash count reset tool, will that realy fool them and allow for warranty repair?
and with that tool available, should i care if my flash count goes up with the normal root methods since i can just reset it to 0 later?
Hardware-wise, the Rogers Note is the same as the AT&T Note and the ROMs will work with both. Only thing to keep in mind is that the ICS ROM available us built off the AT&T leak and does not allow access to some Canadian apps.
I would also suggest flashing CWM first, then back up your unmodified stock ROM, radio, and boot image to reflash later if Rogers decided to release ICS. Let me know if you need any help with that.
I apologize in advance if this has been answered or if I have inadvertently offended. I did watch the video and have developed OSes for 30 years. I also have searched all over this site and the web for resolution and am making no progress, so I'm asking the 'oracle'
Got an ATT S4 (I337) a week ago - it was running UCUAMDL. I rooted it using Motochopper and was happily using Titanium Pro etc. I get notified of OTA update. OTA update downloads (357MB) yet fails during install at 30% consistsently.
I figure it is unhappy with my root - I unrooted and cannot remember which way I did it - I seem to recall SuperSU I was using did not have the built-in 'unroot' support so I grabbed the stock image and used ODIN to flash it.I also may have manually uninstalled the 'normal' way the SU app - I suspect this may be my real problem.
After flashing stock ROM for UCUAMDL phone was no longer rooted, did not say custom etc, and took the OTA upgrade just fine. This was for UCUAMF3 which did add App 2 SD support - BTW this update used another 1G of storage compared to UCUAMDL, and I could not recover the 1G by moving apps either, making it virtually worthless as far as adding support for apps in SD, lol.
The problem is now I cannot seem to get the device rooted again. Motochopper fails when installing su.apk. I suspect I have screwed the pooch - what do I need to do to get this thing rooted again?
Is it typical for an OTA update to fail 'because' the device is rooted?
Any advice is much appreciated.
TheKog said:
I apologize in advance if this has been answered or if I have inadvertently offended. I did watch the video and have developed OSes for 30 years. I also have searched all over this site and the web for resolution and am making no progress, so I'm asking the 'oracle'
Got an ATT S4 (I337) a week ago - it was running UCUAMDL. I rooted it using Motochopper and was happily using Titanium Pro etc. I get notified of OTA update. OTA update downloads (357MB) yet fails during install at 30% consistsently.
I figure it is unhappy with my root - I unrooted and cannot remember which way I did it - I seem to recall SuperSU I was using did not have the built-in 'unroot' support so I grabbed the stock image and used ODIN to flash it.I also may have manually uninstalled the 'normal' way the SU app - I suspect this may be my real problem.
After flashing stock ROM for UCUAMDL phone was no longer rooted, did not say custom etc, and took the OTA upgrade just fine. This was for UCUAMF3 which did add App 2 SD support - BTW this update used another 1G of storage compared to UCUAMDL, and I could not recover the 1G by moving apps either, making it virtually worthless as far as adding support for apps in SD, lol.
The problem is now I cannot seem to get the device rooted again. Motochopper fails when installing su.apk. I suspect I have screwed the pooch - what do I need to do to get this thing rooted again?
Is it typical for an OTA update to fail 'because' the device is rooted?
Any advice is much appreciated.
Click to expand...
Click to collapse
I do believe it's because of the latest OTA update. I know the OTA for Verizon patched our bootloader hack that we previously had and I think the same may have happened for AT&T. You might want to check through the AT&T forums section as you have an AT&T S4 and this is the Verizon section. Hope you find what your looking for!
TheKog said:
Any advice is much appreciated.
Click to expand...
Click to collapse
I'd begin with posting in the forum applicable to your device. That being said, in about sure at&t's update was on par with ours
Sent from my Nexus 7 using Tapatalk HD
I'll post the link to the article below. This is good news if you happen to be in one of the markets that gets this faster LTE. What I am wondering is, in the article it says VZ will roll out updates to AWS capable devices to allow them to take advantage of the spectrum... If we rooted our Note 3, will we miss out?
http://m.androidcentral.com/verizon-deploying-lte-aws-spectrum-major-markets
I would think it would only be a modem update but I could be wrong, but if it is just a modem then that could be flashed in Odin hopefully. Or maybe designgears puzzle pieces will work and it won't even matter.
This is more or less a radio update rather than a software update, so don't mistake this as an OTA or something like that. But, none the less, I would not be so much concerned with it as not being offered to those of us with Root as it will be offered Device/carrier wide Root or No Root. The concern is will it cause us to lose Root. In the past the common protocol was use Voodoo OTA hide Root then take Update and Restore Root after the update, which Android 4.3 really damaged Voodoo. However, SuperSU Pro, which for those of us that have Root already have SuperSU, there is an Upgrade to the Pro version which allows the ability to burry SuperUser into the System much the way that Voodoo did in the past.
As for me, I'm going to hold back on this update and let the others go first, since there is no Recovery as of yet, no rush for me at this point. :good:
If we get bootloader bypass or safestrap, then no worries. Otherwise, you'll have to give up root under the current method in order to take any updates. I bet safestrap is just a few days away.
It should be a modem update to turn it on if it has bootloader files though I don't think we will be able to tear it apart to flash via odin. Because it will.no longer be signed? If the "puzzle pieces" fit then we will be able to flash through recovery though....If I'm wrong please correct me
Sent from my SM-N900V using xda app-developers app
Maybe we don't need an update and AWS works right out of the box? I don't know. Can't get near Bryant Park to test it out.
So, I am getting an LG G3 tomorrow.
I already looked up how to downgrade it to 10B, root with Stump or Ioroot, and use Bump! to install TWRP. (Unless the software it comes with will be rootable, but I doubt it. If I am wrong, please let me know!) I obviously don't know everything there is to know, and may have missed some things.
Once I have it rooted.
I upgrade it via OTA keeping root with SuperSU's survival mode.
And it should stay rooted?
Then I use Bump! to flash TWRP into it, or can I do that before and update? I am just getting this phone and I really don't want to mess it up.
Downgrading and rooting it will be no issue, but I am unsure whether I use Bump! to install TWRP before or after updating it OTA.
Or if I should even update it at all and wait until developers say it's okay on the latest software as of Dec. 13th.
I checked around for a good thirty minutes and did not find a clear answer, I am hoping someone can directly clear this up.
I know updating a phone OTA while trying to keep root isn't the smartest thing to do, but if it works then I have the latest software and it's also a rooted device.
Also, the latest software I saw was 12D? Is that it, or is it 11C? I am confused on how the updates are (in the sense of which ones are out for this phone/coming out soon).
In simplicity/TL;DR:
(I did read about my issue, but could not find anything so I asked here!)
Once I downgrade to 10B and root my G3, is it safe to update OTA and keep root? (With SuperSU Survival Mode I'd assume.)
If so, should I flash TWRP with Bump! before or after the updates?
- If after, what should I do? Reflash completely back to 10B?
What is the latest released update for the G3 (Verizon - VS985)?
- Is there a new update coming soon?
Do the updates actually help the phone performance and fix issues without me doing anything to improve performance and fix issues myself?
Thanks!
Ariac Konrel said:
So, I am getting an LG G3 tomorrow.
I already looked up how to downgrade it to 10B, root with Stump or Ioroot, and use Bump! to install TWRP. (Unless the software it comes with will be rootable, but I doubt it. If I am wrong, please let me know!) I obviously don't know everything there is to know, and may have missed some things.
Once I have it rooted.
I upgrade it via OTA keeping root with SuperSU's survival mode.
And it should stay rooted?
Then I use Bump! to flash TWRP into it, or can I do that before and update? I am just getting this phone and I really don't want to mess it up.
Downgrading and rooting it will be no issue, but I am unsure whether I use Bump! to install TWRP before or after updating it OTA.
Or if I should even update it at all and wait until developers say it's okay on the latest software as of Dec. 13th.
I checked around for a good thirty minutes and did not find a clear answer, I am hoping someone can directly clear this up.
I know updating a phone OTA while trying to keep root isn't the smartest thing to do, but if it works then I have the latest software and it's also a rooted device.
Also, the latest software I saw was 12D? Is that it, or is it 11C? I am confused on how the updates are (in the sense of which ones are out for this phone/coming out soon).
In simplicity/TL;DR:
(I did read about my issue, but could not find anything so I asked here!)
Once I downgrade to 10B and root my G3, is it safe to update OTA and keep root? (With SuperSU Survival Mode I'd assume.)yes
If so, should I flash TWRP with Bump! before or after the updates?after, or you will get stuck in recovery
- If after, what should I do? Reflash completely back to 10B?no, just flash twrp after updating
What is the latest released update for the G3 (Verizon - VS985)?12b
- Is there a new update coming soon?unlikely anyone can answer this
Do the updates actually help the phone performance not really and fix issues other than lag im not sure what needs to be fixed without me doing anything to improve performance and fix issues myself? for the most part, you will need to tweek and mod yourself to improve performance and fix issues such as lag
Thanks!
Click to expand...
Click to collapse
in red above
One more thing...
When I am updating and another software update is released, I will have TWRP flashed.
Updating it will cause a bootloop.
How can I prevent that?
Using titanium backup (TiBU) or similar program, freeze the app called "System updates 1_...". For me this has worked, though some people seem to still have issues; I'm trying to figure out if it is a TiBU problem or if they have accidentally frozen the wrong thing.
Alternative is to go to /system/app and rename the two LGDMSClient files, add a .bak to the end of the names, then restart.
See this post: http://forum.xda-developers.com/showthread.php?p=56061720
Copy the zip in the first post onto your phone. If you accidentally do get an ota after you have a custom recovery, tell twrp to Install that zip
file. It will flush the ota from your system, so you aren't such buying to recovery.
HTH!
Fwiw I just got a new G3 and it came with 10B
Doh...
BladeRunner said:
Fwiw I just got a new G3 and it came with 10B
Click to expand...
Click to collapse
Lucky....12b here
rensmooth said:
Lucky....12b here
Click to expand...
Click to collapse
You DO know that you can downgrade back to 10b to root and bump, correct? Just use KDZ or TOT files.
That was one of the other things I researched before getting this phone. Luckily, it came with 10B, but I'm on 12b, rooted and bumped.
Yes thanks. Just preparing everything. I had LG usb driver issue,resolved now with latest from LG. Now downloading 10b TOT. Too many years getting comfortable rooting HTC 's lol.
rensmooth said:
Yes thanks. Just preparing everything. I had LG usb driver issue,resolved now with latest from LG. Now downloading 10b TOT. Too many years getting comfortable rooting HTC 's lol.
Click to expand...
Click to collapse
I know the feeling. For the past 3 three years, I was on Motorola phones, so there was a lot of FXZ files and fastboot flashing for me. Switching to LG meant learning that all over again.
New Question
Here, if any of you know the answer.
http://forum.xda-developers.com/verizon-lg-g3/help/lg-g3-overheating-issues-t2975509
Still looking for a way to downgrade with wither OS X or Linux, my only two options.
manchucka said:
Still looking for a way to downgrade with wither OS X or Linux, my only two options.
Click to expand...
Click to collapse
That I don't know about, since the two tools to flash the TOT and KDZ files are windows based.
Not sure if you could get them to run via Wine or something, but that might be an option, but since it also requires all the drivers and such, I have no idea how/if that would work and wouldn't even know how to start to set that up.
On motorola phones, you could use the fastboot command line tool that comes with the Android SDK and drivers, so that was nice.
But to take the TOT and KDZ files and flash them under Linux, I have no idea.
I got my phone on 11b, and downgraded it.
Used the Stump root, and then I used Bump! to install TWRP.
Forgot to do the updates, oh well another day.
They're not that important., right?
It's often handy to update modem, to pick up any enhancements on the rf side, the sw that actually talks to the cell tower.
I also ended up updating to the 11c boot, and the 12b system. IMG. 12b system picks up Verizon's first VoLTE, what they call Advanced Calling 1.0.
I did the above by using autoprime's flash2xxx zip files, and the .IMG files.
markfm said:
It's often handy to update modem, to pick up any enhancements on the rf side, the sw that actually talks to the cell tower.
I also ended up updating to the 11c boot, and the 12b system. IMG. 12b system picks up Verizon's first VoLTE, what they call Advanced Calling 1.0.
I did the above by using autoprime's flash2xxx zip files, and the .IMG files.
Click to expand...
Click to collapse
Advanced calling does nothing for me because I believe it's an extra charge on your bill for it. Forget that!
AC 1.0 is no added charge. HD voice is billed the same as any other call. The video part of a video call gets booked against your data plan (I'm grandfathered Unlimited), and free if it goes over WiFi.
manchucka said:
Still looking for a way to downgrade with wither OS X or Linux, my only two options.
Click to expand...
Click to collapse
If I was you. I would get me an older used Win7 Laptop if you want to flash phones. Will make your life easier...
help
markfm said:
It's often handy to update modem, to pick up any enhancements on the rf side, the sw that actually talks to the cell tower.
I also ended up updating to the 11c boot, and the 12b system. IMG. 12b system picks up Verizon's first VoLTE, what they call Advanced Calling 1.0.
I did the above by using autoprime's flash2xxx zip files, and the .IMG files.
Click to expand...
Click to collapse
can you please show me how to this my phone got stuck tryin to go to 11c
In the Verizon g3 General section, stickies, bweN diorD has a reference thread. He has links to the various images, and to a thread on using flash2.
one click root
BladeRunner said:
Fwiw I just got a new G3 and it came with 10B
Click to expand...
Click to collapse
This is the second G3 I have purchased. I Suggest using one click root to root. Also stop and Phil's can be flashed using flashing. It seems easier to me dealing with image rather than zip. I've foremost roms and so far my experience has me favoring Bliss Pop. That is what I am running now and to be honest I think I'm going back to 10b. The customizations are nice but to me it's not worth the problems associated with L.P. My opinion Bliss Pop has the best handle on the problems and still too much for me. I'm going to give LP a few months for the developers fix all bugs. Verizon hasn't released LP yet and there is reason behind that other than being big bully carrier. Once again my opinion only. You picked a great phone that is for sure!