more specifically, getting the AIO Vibrant Toolkit to recognize my phone. (http://forum.xda-developers.com/showthread.php?t=954509)
I installed the vibrant drivers, and my computer recognizes my vibrant and I can mount it no problem, but when I open up the toolkit, it doesnt seem to be able to control the phone at all. (i have usb debugging on and I don't mount the phone when I'm trying to use the toolkit.)
I'm on windows 7 pro.
any ideas?
try it on xp 32 bit and see if it has the same problems
so here i am sitting with my i think its bricked phone. i cant get it to stop boot looping or get it to be recongnized by my computer. i was on admers rom and since then i been having probs with connecting to odin and computer.. some say i need drivers for a nexus s drivers but i cant seem to find any that install. any help is apreciated. i am on windows 7 and also have a windows xp xomp
davzava said:
so here i am sitting with my i think its bricked phone. i cant get it to stop boot looping or get it to be recongnized by my computer. i was on admers rom and since then i been having probs with connecting to odin and computer.. some say i need drivers for a nexus s drivers but i cant seem to find any that install. any help is apreciated. i am on windows 7 and also have a windows xp xomp
Click to expand...
Click to collapse
Try these: http://d.pr/ixua
Having searched for a long time for a solution in using Odin under Mac OSX environment, I've finally found a solution! A lot of people say can't , but here it is...
1. Load up VirtualBox's Windows session
2. Download the Samsung USB drivers in Windows from the attachment and extract in a folder.
3. Closes the Windows session
4. Go to the USB setting of the Windows session
3. Reboot SGS2 in download mode
4. Plug in the phone to USB
5. Add a new USB filter <SAMSUNG Gadget Serial [021B]>
- Note: There could be a error box showing up, ignore it
6. Unplug USB
7. Load up Windows session again
8. Once loaded, plug in the phone again and wait for new hardware prompt
9. Add the required drivers from the downloaded file
10. Unplug USB
11. Load Odin
After Odin is loaded inside the Windows session and the phone is plugged in, the COM box will turn yellow and you can flash whatever you want!
My setup is like this:
Mac OS: 10.7.2 Lion
Win OS: Win XP SP3 32 bit
VirtualBox: 4.1.6 (with USB extension pack)
For those who are using difference OS versions, please report the results and help others! I'll try to generate a list from the feedback.
Thanks, I've been looking for a way to do this forever.
Working on my setup:
OSX (Host) - 10.7.2
Win (Guest) - XP SP3 32bit
VBox - 4.1.8 (USB extention pack)
Virtualbox Odin crash
I actually managed to work out who to get as far as getting Odin to recognise my phone (after ages of fiddling, i found the usb filters in virtual box).
HOWEVER, when I START odin to flash a rom, it reboots my VM. Anyone got any ideas what might cause this?
FYI:
I am trying to flash a previous rom version onto my Galaxy Note (LA4 back down to KKA [United Kingdom]) so that I can run the one-click CF-Root.
NB:
Running OSX Lion
Virtualbox version 4.1.8
Windows XP with service pack 3
davidgood89 said:
I actually managed to work out who to get as far as getting Odin to recognise my phone (after ages of fiddling, i found the usb filters in virtual box).
HOWEVER, when I START odin to flash a rom, it reboots my VM. Anyone got any ideas what might cause this?
FYI:
I am trying to flash a previous rom version onto my Galaxy Note (LA4 back down to KKA [United Kingdom]) so that I can run the one-click CF-Root.
NB:
Running OSX Lion
Virtualbox version 4.1.8
Windows XP with service pack 3
Click to expand...
Click to collapse
check the "enable usb 2.0 (ehci) controller" into machine configuration. that solves the OS reboot for me.
May have to try this cause it sure isn't working with VMWare
You legend
I have been looking for the samsung device drivers for ages. Working great with virtual box. Good bye boot camp, you were only there for odin these days anyway! Thank you.
Thank you !!!
Thank you very much !!!
Thanks!
dj_ghosie = gentleman + scholar
wow. awesome find here.
this worked for me as well. however, I used the drivers and odin and recovery files found here in the 2nd post:
http://forum.xda-developers.com/showthread.php?t=1275031
(drivers http://devphone.org/files/gtab7/Sprint_P100_Samsung_GALAXY_Tab_USB_Drivers.msi)
OSX 10.8.2
WindowsXP SP2
VirtualBox 4.2.4
THANK YOU SO MUCH!!!
OKAY, very interested in this.
I have the Galaxy s3. Would I download this..
http://download.virtualbox.org/virtualbox/4.2.6/VirtualBox-4.2.6-82870-OSX.dmg
and then follow the directions listed in OP?
Want to eventually do this...
http://forum.xda-developers.com/showthread.php?t=2046439
Good stuff!!!
Works in my setup:
Mac OS: 10.8.3
Win OS: Win XP SP3 32 bit
VirtualBox: 4.2.10 (with extension pack)
Stuck at last step when I boot into Odin
Hi,
Thanks for the awesome guide. I'm on a Mac (10.7.5) using VirtualBox with Win7. I installed all the drives and Odin and VirtualBox has no trouble picking up my phone (GS3) when I plug in in BEFORE going to Odin mode.
Then I follow the last set of instructions (unplug USB, boot into Odin, plug phone back in) and then VirtualBox won't find the phone. Any ideas? I've Googled all over the place and haven't found anyone with this exact issue yet.
Wrong forum. Post in S3 Q&A/similar.
Experience with os Mavericks and windows xp virtualized in vmware
dj_ghosie said:
Having searched for a long time for a solution in using Odin under Mac OSX environment, I've finally found a solution! A lot of people say can't , but here it is...
1. Load up VirtualBox's Windows session
2. Download the Samsung USB drivers in Windows from the attachment and extract in a folder.
3. Closes the Windows session
4. Go to the USB setting of the Windows session
3. Reboot SGS2 in download mode
4. Plug in the phone to USB
5. Add a new USB filter <SAMSUNG Gadget Serial [021B]>
- Note: There could be a error box showing up, ignore it
6. Unplug USB
7. Load up Windows session again
8. Once loaded, plug in the phone again and wait for new hardware prompt
9. Add the required drivers from the downloaded file
10. Unplug USB
11. Load Odin
After Odin is loaded inside the Windows session and the phone is plugged in, the COM box will turn yellow and you can flash whatever you want!
My setup is like this:
Mac OS: 10.7.2 Lion
Win OS: Win XP SP3 32 bit
VirtualBox: 4.1.6 (with USB extension pack)
For those who are using difference OS versions, please report the results and help others! I'll try to generate a list from the feedback.
Click to expand...
Click to collapse
just my experience:
Mac os Mavericks, vmware, windows xp virtualized in vmware, last version of samsung kies installed inside the windows xp virtualized machine. install Odin3 3.10, put your phone in download mode, connect the usb cable and when operating system ask for connection with osx or vmware obviosly choose vmware, Odin3 recognize immediatly the phone and you can update everything you want. I have updated my bootloader e my CMW and after installed the rom "android revolution hd" without any problem
Method still works. macOS Big Sur host, Windows 10 guest.
You need to make sure you have VirtualBox Extension Pack installed, otherwise in VB USB settings you'll only see USB 1.1 controller.
May need to create different filters for connecting your phone in normal mode vs download/adb/whatever.
Also I didn't need any Samsung drivers (for my S10e Exynos). Everything "just worked".
Hello,
my laptop has the operating system GNU/Linux (Debian Testing) and I installed Windows XP Professional on VirtualBox. Virtualized XP recognizes USB devices mounted on the host. After, I installed the drivers for my smartphone Star S7589 and it is recognized by XP.
The problem begins with Flash Tools. When I want to start the process, after giving the button "Download" and I insert the phone without battery, then VirtualBox not recognize it and It doesn't start the installation of the ROM.
How could you recognize the phone connected to USB when it's turned off?
Thanks.
luface2000 said:
Hello,
my laptop has the operating system GNU/Linux (Debian Testing) and I installed Windows XP Professional on VirtualBox. Virtualized XP recognizes USB devices mounted on the host. After, I installed the drivers for my smartphone Star S7589 and it is recognized by XP.
The problem begins with Flash Tools. When I want to start the process, after giving the button "Download" and I insert the phone without battery, then VirtualBox not recognize it and It doesn't start the installation of the ROM.
How could you recognize the phone connected to USB when it's turned off?
Thanks.
Click to expand...
Click to collapse
I had a very similar problem. Ubuntu 13.04, virtualbox and Windows Vista. My tablet could be recognized as a mass storage device but I could never get it into APX mode because it wouldn't recognize it.
I ended up finding flash tools for my tablet for Linux.
I would suggest you see if there are flashing tools that work on Linux instead.
TomTcom said:
I had a very similar problem. Ubuntu 13.04, virtualbox and Windows Vista. My tablet could be recognized as a mass storage device but I could never get it into APX mode because it wouldn't recognize it.
I ended up finding flash tools for my tablet for Linux.
I would suggest you see if there are flashing tools that work on Linux instead.
Click to expand...
Click to collapse
Thank you for your advice.
I will look for Flash Tools for GNU\/Linux.
Hey everyone,
so I'm trying to flash CWM again on my p760 after i had to factory reset with the LG tool (since.... i'm dumb and had my cwm backup removed from my card before....... i hate myself), but since Windows 8.1 is a *** i'm just not able to install the omap drivers for fastboot. When i try to search the directory windows just tells me that no drivers where found, when i install them manually i get the USB Connected sound like every second and can't do anything.
I have searched up and down for solutions...but none of them worked.
I'd also tried the Nocturnal drivers (which obviously didn't work but i'm desperate)
I even tried a VM with Windows XP setup, but i can't get the USB to pass trough my 8.1 without having the nonstop USB Connected sound....
Is there any solution? Maybe a linux flash? I've been bashing my head against this problem for hours now and just want my recovery back
ps.: i also installed the Windows Hotfix for fastboot, but to no avail.
I gave up on it. Install windows 7 instead. With windows 8 you can disable signature enforcement and install driver correctly, but not in windows 8.1.
nhoc_maruko9x said:
I gave up on it. Install windows 7 instead. With windows 8 you can disable signature enforcement and install driver correctly, but not in windows 8.1.
Click to expand...
Click to collapse
Thanks. I just installed Win7 on my old PC and it's finally working again! What a hassle tho