Hello all,
I'm Beginner with htc, i have problem with boot loop, i have done lot of search in the internet and i applied many procedures but i couldn't resolve the problem.
My phone is :
HTC EVO 3D GSM
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
RADIO-11.25.3504.06_M
OpenDSP-v02.6.0.2226.00.02.02
eMMC-boot
Can i have your helps please?
Thank you very much
Best regards,
On hboot 1.53 s-on you can only flash sense based roms. This means ics only, no jelly bean, because jb is based on cyanogenmod. If you have 4ext recovery, go into it, and in the Tools section, activate Smartflash. That way you will not have any more boot loops on ics sense roms, but the rest are still unavailable to you... i suggest you revert to stock ruu, go to unlimited.io and get s-off, then downgrade hboot to 1.49, for everything to work. There are a lot of tutorials around here for that
Sent from my Evo 3D GSM using xda premium
aagrou said:
Hello all,
I'm Beginner with htc, i have problem with boot loop, i have done lot of search in the internet and i applied many procedures but i couldn't resolve the problem.
My phone is :
HTC EVO 3D GSM
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
RADIO-11.25.3504.06_M
OpenDSP-v02.6.0.2226.00.02.02
eMMC-boot
Can i have your helps please?
Thank you very much
Best regards,
Click to expand...
Click to collapse
What abaout your bootloader is it LOCKED or UNLOCKED ? Do u have custom rom or original stock ICS rom?
Dadovvv said:
What abaout your bootloader is it LOCKED or UNLOCKED ? Do u have custom rom or original stock ICS rom?
Click to expand...
Click to collapse
thank you for your replays,
my phone is unloked, i don't know each rom or ruu i can use i downloaded a lot of rom and ice, i had installed them by 4rex and fasboot but doesn't work.
I can't switch my phone to s-off.
thank you very much for all helps,
best regrades,
I really suggest you to S-OFF and for that, here's a small tutorial: Go to 4EXT, Wipe everything except SD Card. Then reboot into bootloader. In bootloader click the power button to activate fastboot and connect your phone to pc. In a command prompt, while the phone is connected (in hboot fastboot, very important) write "fastboot oem lock". After you have done so, find the RUU file to fit your phone (http://androidfiles.org/ruu/?dir=Shooter search for the one to fit your radios). After the ruu has completed, root your phone again, and then get S-OFF from unlimited.io. Then everything will work nicely
posedatull said:
I really suggest you to S-OFF and for that, here's a small tutorial: Go to 4EXT, Wipe everything except SD Card. Then reboot into bootloader. In bootloader click the power button to activate fastboot and connect your phone to pc. In a command prompt, while the phone is connected (in hboot fastboot, very important) write "fastboot oem lock". After you have done so, find the RUU file to fit your phone (http://androidfiles.org/ruu/?dir=Shooter search for the one to fit your radios). After the ruu has completed, root your phone again, and then get S-OFF from unlimited.io. Then everything will work nicely
Click to expand...
Click to collapse
when the RUU has completed just unlock bootloader again and u are ready to go with wire trick ,,no need to root (root does not require more for wire trick)
Thank you all,
I have done this yesterday but doesn't work for my phone, i have use all ruu.exe that have the same radios like my phone but it doesn't completed, the ruu.exe show me the error that my phone is non-compatible with this ruu,
Please, can you send me a link for any ruu works with my phone described above,?
Thank you very much for your all collaborations and helps,
Best regards,
Dadovvv said:
when the RUU has completed just unlock bootloader again and u are ready to go with wire trick ,,no need to root (root does not require more for wire trick)
Click to expand...
Click to collapse
Thank you all,
I have done this yesterday but doesn't work for my phone, i have use all ruu.exe that have the same radios like my phone but it doesn't completed, the ruu.exe show me the error that my phone is non-compatible with this ruu,
The ruu that i have used from the ()are:
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_264110_signed.exe
RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed.exe
RUU_SHOOTER_U_ICS_35_S_Rogers_WWE_3.28.631.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262715_signed.exe
Please, can you send me a link for any ruu works with my phone described above,?
Thank you very much for your all collaborations and helps,
Best regards,
posedatull said:
I really suggest you to S-OFF and for that, here's a small tutorial: Go to 4EXT, Wipe everything except SD Card. Then reboot into bootloader. In bootloader click the power button to activate fastboot and connect your phone to pc. In a command prompt, while the phone is connected (in hboot fastboot, very important) write "fastboot oem lock". After you have done so, find the RUU file to fit your phone (http://androidfiles.org/ruu/?dir=Shooter search for the one to fit your radios). After the ruu has completed, root your phone again, and then get S-OFF from unlimited.io. Then everything will work nicely
Click to expand...
Click to collapse
Thank you all,
I have done this yesterday but doesn't work for my phone, i have use all ruu.exe that have the same radios like my phone but it doesn't completed, the ruu.exe show me the error that my phone is non-compatible with this ruu,
The ruu that i have used from the ()are:
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Rad io_11.77.3504.00U_11.25.3504.06_M_release_264110_s igned.exe
RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio _11.77.3504.00U_11.25.3504.06_M_release_262714_sig ned.exe
RUU_SHOOTER_U_ICS_35_S_Rogers_WWE_3.28.631.1_Radio _11.77.3504.00U_11.25.3504.06_M_release_262715_sig ned.exe
Please, can you send me a link for any ruu works with my phone described above,?
Thank you very much for your all collaborations and helps,
Best regards,
Thank you, this has been very helpful!
posedatull said:
On hboot 1.53 s-on you can only flash sense based roms. This means ics only, no jelly bean, because jb is based on cyanogenmod. If you have 4ext recovery, go into it, and in the Tools section, activate Smartflash. That way you will not have any more boot loops on ics sense roms, but the rest are still unavailable to you... i suggest you revert to stock ruu, go to unlimited.io and get s-off, then downgrade hboot to 1.49, for everything to work. There are a lot of tutorials around here for that
Sent from my Evo 3D GSM using xda premium
Click to expand...
Click to collapse
aagrou said:
Thank you all,
I have done this yesterday but doesn't work for my phone, i have use all ruu.exe that have the same radios like my phone but it doesn't completed, the ruu.exe show me the error that my phone is non-compatible with this ruu,
Please, can you send me a link for any ruu works with my phone described above,?
Thank you very much for your all collaborations and helps,
Best regards,
Click to expand...
Click to collapse
I think you can enter the fastboot mode in the phone, connect it to your pc, use "fastboot oem readcid", the cid can tell what ruu to choose.
radiowave21 said:
I think you can enter the fastboot mode in the phone, connect it to your pc, use "fastboot oem readcid", the cid can tell what ruu to choose.
Click to expand...
Click to collapse
Hello, my cid: VODAP304:
but i don't no wich ruu work with my phone.
thank you,
Related
hello everyone
I recently installed KingCobra3D ICS 1.2 ROM on my EVO 3D, and it was running well until all of a sudden it started having many issues of turning off while the screen is sleeping (it wont turn back on until I do a battery pull), rebooting, and wont turn on until I do multiple battery pulls. First I thought it was the kernel, so I reflashed the kernel along with the ROM many times, and it still does those issues. My question is, how dp I go back to the original stock Gingerbread firmware without relocking the bootloader? I flashed the ICS ROM, not firmware.
EDIT: I tried restoring my backup from the recovery, but the phone didn't boot after that
any help is greatly appreciated. thanks
extra helpful info:
ROGERS HTC Evo 3D
GSM, Carrier Unlocked
unlocked bootloader via HTCDev method, S-ON, H-BOOT-1.49.0008
madmajd said:
hello everyone
I recently installed KingCobra3D ICS 1.2 ROM on my EVO 3D, and it was running well until all of a sudden it started having many issues of turning off while the screen is sleeping (it wont turn back on until I do a battery pull), rebooting, and wont turn on until I do multiple battery pulls. First I thought it was the kernel, so I reflashed the kernel along with the ROM many times, and it still does those issues. My question is, how dp I go back to the original stock Gingerbread firmware without relocking the bootloader? I flashed the ICS ROM, not firmware.
EDIT: I tried restoring my backup from the recovery, but the phone didn't boot after that
any help is greatly appreciated. thanks
extra helpful info:
ROGERS HTC Evo 3D
GSM, Carrier Unlocked
unlocked bootloader via HTCDev method, S-ON, H-BOOT-1.49.0008
Click to expand...
Click to collapse
Hello madmajd,
S-ON as your phone is you can not flash boot.img(kernel) from the recovery.
Extract boot.img from your gingerbread rom.zip and flash-it from fastboot
Code:
fastboot flash boot boot.img
reboot in recovery, do a full wipe
and flash your rom
sincerely,
fxjumper said:
Hello madmajd,
S-ON as your phone is you can not flash boot.img(kernel) from the recovery.
Extract boot.img from your gingerbread rom.zip and flash-it from fastboot
Code:
fastboot flash boot boot.img
reboot in recovery, do a full wipe
and flash your rom
sincerely,
Click to expand...
Click to collapse
While its true YOU CAN flash the kernel that way its not needed with HTC Unlock...
If u enter your recovery via fastboot command prompt ( fastboot boot your recoveryfilename.img), roms And KERNELS WILL flash like normal from the recovery. Here's some extra info I pm'd to another gsm user...
mpgrimm2 said:
Some key points:
- The ICS /ICS Leaked roms (3.6/4.0) typically have trouble booting the stock kernel on several HTC Unlocked phones. This doesn't seem to occur on S-off phones. (Boot loops are usually a sign of a kernel issue).
- I am on a Sprint CDMA EVO3D & have no idea how to s-off your gsm version/downgrade the bootloader.
- I do have an HTC Unlocked guide in my signature that covers many of the basics for the CDMA version. It's the same process/steps for gsm, but the files used need to be gsm specific from the gsm threads (recovery, kernel, roms, etc).
- If u decide to run an Ruu (exe or zip), you must be locked/relocked & run the same or higher firmware version as currently installed. The exe will work with the phone booted to android or with the bootloader in "fastboot usb". The zip must be renamed exactly PG86IMG.zip and put directly on the root of the sdcard & boot into the bootloader.
- If the phone boots to the bootloader, you can use fastboot command prompt to " unlock" the phone again with your unlock code. Then fastboot flash the recovery again (4ext or Cwm 4.0.1.4 gsm versions recommended), then fastboot boot the recovery, run a superwipe (or format system, data & cache), & flash a gingerbread Rom or one of your nand backups.
- The correct HTC unlocked flashing process (ICS or GB) is to enter recovery via fastboot command prompt, format/superwipe, & flash the Rom (and/or kernel) as you normally would. (4ext Recovery is a solid workaround to using fastboot commands)
Click to expand...
Click to collapse
Sent from my PG86100 using Tapatalk
Sprint HTC EVO 3D
Unlocked
Shooter XC SHIP S-ON RL
HBOOT 1.50.0000
cMMC-boot
Recovery - TWRP 1.1.1
Stuck in bootloop. How do I fix?
wbpo5l said:
Sprint HTC EVO 3D
Unlocked
Shooter XC SHIP S-ON RL
HBOOT 1.50.0000
cMMC-boot
Recovery - TWRP 1.1.1
Stuck in bootloop. How do I fix?
Click to expand...
Click to collapse
Doing what?
You might want to consider upgrading your firmware and getting S-OFF status. I have a guide here that can help.
ramjet73
Too late!
Ok so I followed someone's note to me that said I needed to relock the phone first. So following the instructions for relocking I did the "fastboot oem lock" and now I am "Relocked" but the phone only boots now to Bootloader/Fastboot.
What do I do now?
All I really want to do at this point is get the phone back working. I don't care about root as this phone is going to someone else.
Thanks
wbpo5l said:
What do I do now?
All I really want to do at this point is get the phone back working. I don't care about root as this phone is going to someone else.
Thanks
Click to expand...
Click to collapse
Just do step1 of the guide I linked in my previous post and you will be back to stock.
ramjet73
wbpo5l said:
Sprint HTC EVO 3D
Unlocked
Shooter XC SHIP S-ON RL
HBOOT 1.50.0000
cMMC-boot
Recovery - TWRP 1.1.1
Stuck in bootloop. How do I fix?
Click to expand...
Click to collapse
Hi
I think you need to downgrade to HBOOT 1.49.007 Because versions 1.50.00 and above have a restart issue with custom ROMS
The bad new is that you must spend your HTC EVO 3D S-OFF
I followed this thread to downgrade
http://forum.xda-developers.com/showthread.php?t=17434661
Follow this thread to return to 1.49.007 version of hboot
http://forum.xda-developers.com/showthread.php?t=1906172
If you really want to s-on your phone after this downgrade, you can enter
fastboot oem writesecureflag 3
in fastboot mode, but i don't recommend it
Pay attention to these manipulations and does not hesitate to completely read all the tutorials and all comments.
goodbye,
fxjumper said:
Hi
I think you need to downgrade to HBOOT 1.49.007 Because versions 1.50.00 and above have a restart issue with custom ROMS
The bad new is that you must spend your HTC EVO 3D S-OFF
Click to expand...
Click to collapse
I know he didn't say that, but I think the hboot 1.5 indicates that he has a CDMA model.
ramjet73
Thank you
ramjet73 said:
I know he didn't say that, but I think the hboot 1.5 indicates that he has a CDMA model.
ramjet73
Click to expand...
Click to collapse
ok
Thank you everyone for your help.
Was able to re-lock it and find and install through the correct RUU.exe.
Now my wife has a phone again.
I have been trying to root my 3d for liek 2 days now and have searched every where and tried ever trick i can find. No matter what i cannot seem to figure out what is going on.
I am hboot 1.58 S-ON i keep getting an error that the RUU i have is not the right one i have downloaded 3 different ones and all say the same thing i have read many thread and tried many ways to root this thing. I relock before using RUU but no matter what i get this message. It also will not flash any recovery, It just gets stuck at "sending"
i have the right drivers and everything. my computer sees my phone when i type "fastboot devices". any help would be so great.
lulzy1 said:
I have been trying to root my 3d for liek 2 days now and have searched every where and tried ever trick i can find. No matter what i cannot seem to figure out what is going on.
I am hboot 1.58 S-ON i keep getting an error that the RUU i have is not the right one i have downloaded 3 different ones and all say the same thing i have read many thread and tried many ways to root this thing. I relock before using RUU but no matter what i get this message. It also will not flash any recovery, It just gets stuck at "sending"
i have the right drivers and everything. my computer sees my phone when i type "fastboot devices". any help would be so great.
Click to expand...
Click to collapse
Based on your bootloader version, it sounds like you have a Sprint Evo 3D. I have a guide here that should help you get the the right RUU flashed, then get root and S-OFF.
ramjet73
ramjet73 said:
Based on your bootloader version, it sounds like you have a Sprint Evo 3D. I have a guide here that should help you get the the right RUU flashed, then get root and S-OFF.
ramjet73
Click to expand...
Click to collapse
your guide is the first guide I tried with no luck.. and yes im sprint
lulzy1 said:
your guide is the first guide I tried with no luck.. and yes im sprint
Click to expand...
Click to collapse
Then you need to give more specifics. If you can post the header information displayed in your bootloader here, and give the text of the error messages you are getting when you try to flash the RUU contained in the download, that will make it easier to help.
Also, please issue the following commands from fastboot and post the output here:
fastboot getvar cid
fastboot getvar mainver
ramjet73
Definitely post up the information ramjet73 is asking for.
Btw ramjet, you are quick. You always beat me to it!
Also curious if you are running the Ruu while booted up or from fastboot?
This seems blaringly obvious but if you are s-on, did you relock the bootloader?
Sent from my PG86100 using Tapatalk 2
ramjet73 said:
Then you need to give more specifics. If you can post the header information displayed in your bootloader here, and give the text of the error messages you are getting when you try to flash the RUU contained in the download, that will make it easier to help.
Also, please issue the following commands from fastboot and post the output here:
fastboot getvar cid
fastboot getvar mainver
ramjet73
Click to expand...
Click to collapse
bootloader header
***unlocked*** (currently, as I relock it to run RUU)
SHOOTER XC SHIP S-ON RL
HBOOT-1.58.0000
eMMC-boot
C:\Users\lulzyl\Desktop\QADERSO\Root>fastboot getvar cid
cid: SPCS_001
finished. total time: -0.000s
C:\Users\lulzyl\Desktop\QADERSO\Root>fastboot getvar mainver
mainver: SPCS_001
finished. total time: 0.005s
My battery is too low to run RUU right and im about to go to sleep I will update with the exact wording tomorrow but it says that Do not have the right RUU for my device. and if i am remembering correctly it says error 155 but I cant be 100% positive.
what i am using is RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed
Brian706 said:
Also curious if you are running the Ruu while booted up or from fastboot?
This seems blaringly obvious but if you are s-on, did you relock the bootloader?
Click to expand...
Click to collapse
He said in the OP that "I relock before using RUU but no matter what i get this message", but that's why I want to see his bootloader info and the text of the message he is getting.
I always recommend starting the RUU.exe with the phone in "fastboot usb" mode, but in theory it should work even if he is booted into Android.
Let's see what he has to say.
lulzy1 said:
C:\Users\lulzyl\Desktop\QADERSO\Root>fastboot getvar mainver
mainver: SPCS_001
finished. total time: 0.005s
Click to expand...
Click to collapse
That mainver doesn't look right. I should be 2.89.651.2 if you are on hboot 1.58. If that's really the current mainver it would explain why you can't flash the RUU. I have no idea how that could have been changed without flashing something with an incorrect android-info.txt in a PG86IMG.zip file, which requires S-OFF, or someone setting the mainver incorrectly via ADB. Did you get the phone new or used?
Please verify that is correct, and if it is, it will need to changed before the RUU will take.
Also, when you try to run the RUU.exe again make sure the phone is in fastboot USB mode.
ramjet73
I will rerun the comand later to make sure, I always run it from fastboot usb. Also i got the phone as an insurance replacement. sprint sucks so bad there is no telling if the phone is actually new or not
ok.. update I redid your command this morning and got what you were looking for.
C:\Users\lulzy\Desktop\QADERSO\Root>fastboot getvar mainver
mainver: 2.89.651.2
finished. total time: 0.000s
here is what RUU continues to give me no matter if im in fastboot usb or just the home screen
ERROR [155]: UNKNOWN ERROR
The ROM Update Utility cannot update your android phone.
Please get the correct ROM Update Utility and try again.
This is using the one you have in your RUU file ramjet and when this happens i get the black HTC screen but it has no loading bar and nothing in all the corners
lulzy1 said:
here is what RUU continues to give me no matter if im in fastboot usb or just the home screen
ERROR [155]: UNKNOWN ERROR
The ROM Update Utility cannot update your android phone.
Please get the correct ROM Update Utility and try again.
This is using the one you have in your RUU file ramjet and when this happens i get the black HTC screen but it has no loading bar and nothing in all the corners
Click to expand...
Click to collapse
So your CID and mainver look OK.
The 155 error usually means your current bootloader is unlocked.
Try relocking your your bootloader, then remove and and replace the battery and start the bootloader. Since your bootloader is currently unlocked, the status should show as "*** RELOCKED ***". Make sure it does and that you are connected to your PC in "fastboot usb" mode, then try it again.
If that doesn't work, you can try downloading just the RUU.exe from here. It's the same one that is in the QADERSO .zip file, but it's worth a try.
ramjet73
during my previous attempt it was relocked, anytime i try running RUU from fastboot it says it cant run because my battery is too low (i have 93% battery and i dont get the warning if i run from the home screen) i cannot run RUU from fastboot because this is all i ever see even after re downloading
lulzy1 said:
during my previous attempt it was relocked, anytime i try running RUU from fastboot it says it cant run because my battery is too low (i have 93% battery and i dont get the warning if i run from the home screen) i cannot run RUU from fastboot because this is all i ever see even after re downloading
Click to expand...
Click to collapse
The battery low indicator in fastboot mode sounds like a hardware problem to me. If your battery isn't charging correctly it may be a problem with your cable or USB port. Many people have gotten the RUU.exe to flash successfully by changing to a different cable and/or PC, but if you can't do that I suggest fully charging the battery with the A/C adapter that came with the phone before trying to flash the RUU.exe again.
Flashing the RUU.exe with the phone in Android mode may be masking the problem, but something is not right with your hardware.
ramjet73
all done!! different computer and cord works.
Thanks alot
How do you relock the hboot? I'm getting the same error. Thanks.
"fastboot OEM lock"
Phone:
Sprint HTC EVO 3D
Root & S-Off(JBear)
HBoot: JBear 1.58.5858
Firmware: 2.89.651.5
Radio: 1.09.00.0706
Rom: FroZenROM Ep 2.1
Kernel: AnthraX 2.7.0
Recovery: TWRP 2.3.3.0
SDCard: San Disk 64GB Extreme Class 10 UHS-1 (Low External Storage Wizard? Uninstall)
i need help
i need some help fixing my phone i rooted it had it working well for about 2 hours changed somthing now im stuck on the htc green and white sceen
my bootloader says relocked ive been trying to follow the guides but nothing seems to work, right now the phone is in the bootloader as thats all ive been able to access i have a virgin mobile evo 3d with hboot 1.58..can somebody please help me? or is my phone screwed?
Your phone is not screwed
What did you change? I'm guessing you either flashed a rom that's incompatible with your current hboot or you are s-on and need to flash the kernel separately.
What recovery do you have installed?
Brian706 said:
Your phone is not screwed
What did you change? I'm guessing you either flashed a rom that's incompatible with your current hboot or you are s-on and need to flash the kernel separately.
What recovery do you have installed?
Click to expand...
Click to collapse
thanks for the response but i actually managed to fix it yesterday. idk what i changed but i was using the clockworld recovery but it wouldnt install the stock shooter file so i used 4ext and its all bueno now except it boots as a sprint phone now but whatever i can deal with that
Glad you got it!
I'd stick with 4ext. I have heard cwm doesn't play well with this device but have not experienced it first hand.
Yea I won't be putting that back on my phone now I have a question I believe I have the vmobile stock shooter on my pc I need to fast boot that to get my splash screen and stuff back right? Cause right now when I turn it on it says sprint
Hi,
Device: Flyer Wifi 16gb
HBOOT: 6.11.1111
Revolutionary S-OFF
No Root (apparently by Root Checker Basic)
3.2.1 RUU
i followed this guide:
http://forum.xda-developers.com/showpost.php?p=19339909&postcount=1
to regain S-ON and standard recovery. Unfortunately it didnt work, I installed the RUU, it boots and works fine but if I send the devices to bootloader via ADB it lands back in Revolutionary. The guide was completed without errors.
So I am currently on RUU but with S-OFF and Revolutionary and I would like to get S-ON and standard recovery.
I found several other guides, but I cant see what puts them above the mentioned one and therefore I prefer to ask...
Thank you very much in advance for any help,
P32r
More
For example this:
http://forum.xda-developers.com/showthread.php?t=1257909
just ends in that:
http://forum.xda-developers.com/showpost.php?p=16147471&postcount=77
and that holds for everything I found.
Somebody said I could just use fastboot and send "fastboot oem lock" for the lock and RUU afterwards. But am I right that HBOOT is not replaced by RUU at all? Do I have to downgrade first?
p32r said:
For example this:
http://forum.xda-developers.com/showthread.php?t=1257909
just ends in that:
http://forum.xda-developers.com/showpost.php?p=16147471&postcount=77
and that holds for everything I found.
Somebody said I could just use fastboot and send "fastboot oem lock" for the lock and RUU afterwards. But am I right that HBOOT is not replaced by RUU at all? Do I have to downgrade first?
Click to expand...
Click to collapse
the RUU flash will not write over a S Off Hboot. the procedure you listed in the OP is the only one I know of that will do what you want. Are you sure that when you:
fastboot flash hboot flyer_downgrader.nb0
it was successful?
pic
Thank you for your help!
I attached the output of fastboot and I actually dont think that it flashes correctly but all I saw is "OKAY" and "finished"...
Is the screen supposed to show anything during this flash? Because it stays just the way it is and shows no change in HBOOT or any part of the fastboot screen.
After rebooting it says "HBOOT-6.10.1005" but revolutionary still.
Great Success!
Got it! Works with RUU
RUU_Flyer_HTC_WWE_Wifi_1.36.1114.32_Radio_20.3501.30.089BU_3809.05.04.10_M_release_191235_signed
and NOT with the one I used. With this RUU I did the exact same procedure and succeeded. Now on stock recovery, S-ON and 1.10.0000!
Thank you for the guide, it really does work
How do i unroot my Sprint HTC EVO 3D AND RETURN TO STOCK..
UNLOCKED
SHOOTER XC SHIP S-OFF RL
HBOO1.58.0000
THANKS!
Follow one of the multiple guides.
sent from MY BAD A$$ ET4G
patrao_n said:
Follow one of the multiple guides.
sent from MY BAD A$$ ET4G
Click to expand...
Click to collapse
what multiple guildes?
I myself just run the RUU when I want stock. It's simple.
Sent from my shooter using xda premium
Unroot Help
If you want to unroot, first find the Stock Hboot 1.58, then install it.
Then run the RUU for your device.
Lastly, in fastboot (adb), run "reboot bootloader" then run "fastboot oem writesecureflag 3".
Congrats, you will now be unrooted with bootloader *LOCKED*.
If you need any more help, feel free to PM me.
Boris Spektor said:
then run "fastboot oem writesecureflag 3".
Click to expand...
Click to collapse
DON'T RUN THIS.........
What are you trying to do?
Boris Spektor said:
If you want to unroot, first find the Stock Hboot 1.58, then install it.
Then run the RUU for your device.
Lastly, in fastboot (adb), run "reboot bootloader" then run "fastboot oem writesecureflag 3".
Congrats, you will now be unrooted with bootloader *LOCKED*.
If you need any more help, feel free to PM me.
Click to expand...
Click to collapse
raptoro07 said:
DON'T RUN THIS.........
What are you trying to do?
Click to expand...
Click to collapse
He said to run the RUU before issuing that command so it should be fine if the intent is to return to 100% stock, including S-ON. It's not really necessary to flash the stock bootloader before flashing the RUU but it might save having to restart the RUU if it hangs after flashing the bootloader. The OP said he was already on hboot 1.58 anyway.
You will also need to to lock the bootloader with a zip file in recovery since flashing the RUU doesn't do that. I have a guide here that includes everything you need.
Good luck!
ramjet73
ramjet73 said:
He said to run the RUU before issuing that command so it should be fine if the intent is to return to 100% stock, including S-ON. It's not really necessary to flash the stock bootloader before flashing the RUU but it might save having to restart the RUU if it hangs after flashing the bootloader. The OP said he was already on hboot 1.58 anyway.
You will also need to to lock the bootloader with a zip file in recovery since flashing the RUU doesn't do that. I have a guide here that includes everything you need.
Good luck!
ramjet73
Click to expand...
Click to collapse
When i reinstalled the stock Hboot manually (via bootloader) it showed *LOCKED* for me.
Just wondering, how does flashing a zip file in recovery, (which doesn't touch the Hboot) turn it *LOCKED*?
Boris Spektor said:
When i reinstalled the stock Hboot manually (via bootloader) it showed *LOCKED* for me.
Just wondering, how does flashing a zip file in recovery, (which doesn't touch the Hboot) turn it *LOCKED*?
Click to expand...
Click to collapse
That's because you were locked already and it just wasn't showing because the custom hboot masks that status.
There's a link to a thread that explains how the lock zip file works in this post.
ramjet73
Thanks guys for all your help....
Back to stock.
But my HBOOT is still showing S-OFF
SHOOTER XC SHIP S-OFF RL
How do iget S-OFF TO S-ON...
PSid not run this command yet..(fastboot oem writesecureflag 3)
I have an Evo 3d with Virgin Mobile and I desperately want CyanogenMod 10.1
I am rooted, s-off, unlocked, and on hboot 1.57. To flash CM 10.1, you must be on an hboot version lower than 1.57. Is there a way to downgrade my hboot without reverting to s-on? because every link I find warns that you must be s-on, or you will irreversibly brick your phone.
I tried putting the PG86IMG.zip file with hboot 1.40 on my sd card and rebooting into bootloader, but I get an error message (see attached picture)
Please help, and Thank you in advance.
jrvermee said:
I have an Evo 3d with Virgin Mobile and I desperately want CyanogenMod 10.1
I am rooted, s-off, unlocked, and on hboot 1.57. To flash CM 10.1, you must be on an hboot version lower than 1.57. Is there a way to downgrade my hboot without reverting to s-on? because every link I find warns that you must be s-on.
I tried putting the PG86IMG.zip file with hboot 1.40 on my sd card and rebooting into bootloader, but I get an error message (see attached picture)
Please help, and Thank you in advance.
Click to expand...
Click to collapse
I'm on Sprint and by all means I'm no expert. I followed ramjet73's http://forum.xda-developers.com/showthread.php?t=1889438
and was able to switch between hboot's version. Download QADERSO-V2-VM.zip and unpack to C drive. Install HTCDriver3.0.0.007 then open command prompt and do "cd C:\QADERSO\Root"
Then follow this thread http://forum.xda-developers.com/showpost.php?p=32259533&postcount=60
JohnnyBeGood113 said:
I'm on Sprint and by all means I'm no expert. I followed ramjet73's http://forum.xda-developers.com/showthread.php?t=1889438
and was able to switch between hboot's version. Download QADERSO-V2-VM.zip and unpack to C drive. Install HTCDriver3.0.0.007 then open command prompt and do "cd C:\QADERSO\Root"
Then follow this thread http://forum.xda-developers.com/showpost.php?p=32259533&postcount=60
Click to expand...
Click to collapse
Thanks for the reply. I tried that method too and it didn't give me an error message, but when I booted into bootloader it still showed 1.57. Do you remember if you were locked when you downgraded? I think I read somewhere that you had to be but I don't really want to try it because relocking my phone will wipe everything.
And thanks again
jrvermee said:
Thanks for the reply. I tried that method too and it didn't give me an error message, but when I booted into bootloader it still showed 1.57. Do you remember if you were locked when you downgraded? I think I read somewhere that you had to be but I don't really want to try it because relocking my phone will wipe everything.
And thanks again
Click to expand...
Click to collapse
I'm not sure where you got the hboot you are trying to flash but it looks like it's only setup for the Sprint CID and not Virgin Mobile.
Since you are already S-OFF you can follow the procedure in this guide and the hboots linked from that post are setup for both Sprint and VM CID's.
ramjet73
ramjet73 said:
I'm not sure where you got the hboot you are trying to flash but it looks like it's only setup for the Sprint CID and not Virgin Mobile.
Since you are already S-OFF you can follow the procedure in this guide and the hboots linked from that post are setup for both Sprint and VM CID's.
ramjet73
Click to expand...
Click to collapse
Thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
It worked!!