hello
i need help to backup rom of karbonn a111.
please post any solution.
thanks
singhforhelp said:
hello
i need help to backup rom of karbonn a111.
please post any solution.
thanks
Click to expand...
Click to collapse
Do you have CWM for your phone....try that
Sent from my Symphony w25 using xda premium
Root >installcwm>reboot to recovery>make a backup.
Sent from MOON.....
singhforhelp said:
hello
i need help to backup rom of karbonn a111.
please post any solution.
thanks
Click to expand...
Click to collapse
Have you rooted? Someone has posted a method but I have not tried yet, http://forum.gsmhosting.com/vbb/f606/karbonn-a111-rooting-done-1624834/
jesrani said:
Have you rooted? Someone has posted a method but I have not tried yet, http://forum.gsmhosting.com/vbb/f606/karbonn-a111-rooting-done-1624834/
Click to expand...
Click to collapse
I rooted the phone successfully.
http://forum.xda-developers.com/showthread.php?t=2180176
jesrani said:
Have you rooted? Someone has posted a method but I have not tried yet, http://forum.gsmhosting.com/vbb/f606/karbonn-a111-rooting-done-1624834/
Click to expand...
Click to collapse
that is my thread,i do root but i cant find CWM for this model.
please post if any solution you find.
thanks
singhforhelp said:
that is my thread,i do root but i cant find CWM for this model.
please post if any solution you find.
thanks
Click to expand...
Click to collapse
Yes, I noticed the user name later. Thanks for the rooting solution, hope someone is able to find CWM.
cwm install
YES...FINALLY..I DEVELOP FIRST CWM FOR A111...!!!
Download the zip file named A111CWM.RAR from this link :
www . mediafire . com/ ?16efzaani3f2ehj (REMOVE SPACE & USE)
After downloading unzip the file in a folder of you computer. ............................Now
1)Boot your phone in fastboot mode by holding vol up + power on boot till you see a green screen.
2)connect your phone to pc via USB cable and wait for fastboot drivers to install.
3)Double click and run ROOT.bat (root.bat file is in the folder in which you have unzip the downloaded file)
4)Your phone will reboot after the process completes.
I TESTED IT RUN PERFECTLY IN KARBONN A111...!!!!!
I STARTED DEVELOP NEW ROM FOR A111..!!!
downloading,
Hopefully it works as expected.
Thanks for the time and effort.
First Root your Device-Go to CWM/TWRP-Nandroid-Backup
samir0 said:
YES...FINALLY..I DEVELOP FIRST CWM FOR A111...!!!
Download the zip file named A111CWM.RAR from this link :
www . mediafire . com/ ?16efzaani3f2ehj (REMOVE SPACE & USE)
After downloading unzip the file in a folder of you computer. ............................Now
1)Boot your phone in fastboot mode by holding vol up + power on boot till you see a green screen.
2)connect your phone to pc via USB cable and wait for fastboot drivers to install.
3)Double click and run ROOT.bat (root.bat file is in the folder in which you have unzip the downloaded file)
4)Your phone will reboot after the process completes.
I TESTED IT RUN PERFECTLY IN KARBONN A111...!!!!!
I STARTED DEVELOP NEW ROM FOR A111..!!!
Click to expand...
Click to collapse
But how to get into recovery mode....
samir0 said:
YES...FINALLY..I DEVELOP FIRST CWM FOR A111...!!!
Download the zip file named A111CWM.RAR from this link :
www . mediafire . com/ ?16efzaani3f2ehj (REMOVE SPACE & USE)
After downloading unzip the file in a folder of you computer. ............................Now
1)Boot your phone in fastboot mode by holding vol up + power on boot till you see a green screen.
2)connect your phone to pc via USB cable and wait for fastboot drivers to install.
3)Double click and run ROOT.bat (root.bat file is in the folder in which you have unzip the downloaded file)
4)Your phone will reboot after the process completes.
I TESTED IT RUN PERFECTLY IN KARBONN A111...!!!!!
I STARTED DEVELOP NEW ROM FOR A111..!!!
Click to expand...
Click to collapse
i have done all the things you told!! all done!!!
but im not getting cwm recovery yet whenever i go to recovery mode from rom manager...
please help me....
I respect your work!! :good::good::good::good::good:
and please post the custom roms for karbonn a111 and once again please clarify the cwm installation, its not working for me...
waitin for the new rom
samir0 said:
YES...FINALLY..I DEVELOP FIRST CWM FOR A111...!!!
Download the zip file named A111CWM.RAR from this link :
www . mediafire . com/ ?16efzaani3f2ehj (REMOVE SPACE & USE)
After downloading unzip the file in a folder of you computer. ............................Now
1)Boot your phone in fastboot mode by holding vol up + power on boot till you see a green screen.
2)connect your phone to pc via USB cable and wait for fastboot drivers to install.
3)Double click and run ROOT.bat (root.bat file is in the folder in which you have unzip the downloaded file)
4)Your phone will reboot after the process completes.
I TESTED IT RUN PERFECTLY IN KARBONN A111...!!!!!
I STARTED DEVELOP NEW ROM FOR A111..!!!
Click to expand...
Click to collapse
can't hardly wait for your new custom rom.. :good::good:
Does this cwm work?
Sent from Samsung Note 2 N7100 using Tapatalk 2
u can use custom recovery like cwm etc ndu cn also use titanium backup app to backup all of ur apps nd rom..
help me finding karbonn a111 drivers
jesrani said:
I rooted the phone successfully.
http://forum.xda-developers.com/showthread.php?t=2180176
Click to expand...
Click to collapse
Buddy.. i want to root my karbonn a111. trying from a very long time.. but the problem is device driver missing.. i installed sdk means i did everything.. still 3 drivers missing.. names are Tianyu HS-USB android modem 9025 , Tianyu HS-USB Diagnostics 9025(COM8) , Tianyu HS-USB NMEA 9025(COM 10).. these three drivers missing.. i can send or recieve data now.. but it just happened today.. earlier.. i couldn't even send or receive data to my phone.. so still not sure.. so help me with these 3 drivers of karbonn a111 .. thanks
driver for a111
neeld127 said:
Buddy.. i want to root my karbonn a111. trying from a very long time.. but the problem is device driver missing.. i installed sdk means i did everything.. still 3 drivers missing.. names are Tianyu HS-USB android modem 9025 , Tianyu HS-USB Diagnostics 9025(COM8) , Tianyu HS-USB NMEA 9025(COM 10).. these three drivers missing.. i can send or recieve data now.. but it just happened today.. earlier.. i couldn't even send or receive data to my phone.. so still not sure.. so help me with these 3 drivers of karbonn a111 .. thanks
Click to expand...
Click to collapse
you need install pdanet software for adb driver!! for link search google
if you feel i help you please hit thanks button!! i need 10 thnanks.. i want to start karbonn a111 new thread..!!!
---------- Post added at 07:07 AM ---------- Previous post was at 07:00 AM ----------
rackyson said:
i have done all the things you told!! all done!!!
but im not getting cwm recovery yet whenever i go to recovery mode from rom manager...
please help me....
I respect your work!! :good::good::good::good::good:
and please post the custom roms for karbonn a111 and once again please clarify the cwm installation, its not working for me...
Click to expand...
Click to collapse
sorry for that actually i have karbonn a111 (duple series)factory (stock) rom but i can't upload because i need 10 thnx so hit thnxx button to upload
rom to xda dev site
bhagu99 said:
if you feel i help you please hit thanks button!! i need 10 thnanks.. i want to start karbonn a111 new thread..!!!
Click to expand...
Click to collapse
You do not need 10 thanks to post in development forums, you need 10 posts. They should be 10 worthwhile posts though, which is why I've deleted some of your posts. Do not spam the forum just to post in a development forum. It's not exactly the intelligent work I'd expect from someone who wants to be trusted enough with ROM development.
See my signature for info about the 10 post rule and do not spam any more.
his desrsi
Archer said:
You do not need 10 thanks to post in development forums, you need 10 posts. They should be 10 worthwhile posts though, which is why I've deleted some of your posts. Do not spam the forum just to post in a development forum. It's not exactly the intelligent work I'd expect from someone who wants to be trusted enough with ROM development.
See my signature for info about the 10 post rule and do not spam any more.
Click to expand...
Click to collapse
sorry accept my apologies,, can you give me info about lock bootloader??,is karbonn bootloader locked or nothing ?? how to find??is cwm work with my locked bootloader??
i build cwm from build.cwm site...!!
Related
I have iBall Andi4.5h. Please let me know how to root the device in order to get more benefits.
vmgajera said:
I have iBall Andi4.5h. Please let me know how to root the device in order to get more benefits.
Click to expand...
Click to collapse
here is the link i just rooted my iball andi 4.5h
http://forum.xda-developers.com/showthread.php?t=1886460
hit thanks if it helped you.
i need i ball andi 4.5h usb drivers plz post the link
cannot boot into recovery mode
Today i bought iball andi 4.5h phone and tried to root it. I used a tutorial, where a Recovery- APP was used, where i simply had to choose the zipfile and it restarted on its own. Something must have gone wrong, because i cant boot into any kind of recovery (volume up Power).but my phone rooted successfully by using another tutorial.But my ultimate aim is to install clockwork mod recovery.please help
Shanipallikkara said:
Today i bought iball andi 4.5h phone and tried to root it. I used a tutorial, where a Recovery- APP was used, where i simply had to choose the zipfile and it restarted on its own. Something must have gone wrong, because i cant boot into any kind of recovery (volume up Power).but my phone rooted successfully by using another tutorial.But my ultimate aim is to install clockwork mod recovery.please help
Click to expand...
Click to collapse
hi i also own this mobile. can u explain me the exact procedure of rooting this device,,,
http://forum.xda-developers.com/showthread.php?t=1886460
1.) Download attached file from above link.
2.) Extract it
3.) Double click the RunMe.bat and follow instructions!
hit thanks if it helped you.
Help needed with andi driver..
matharuajay said:
http://forum.xda-developers.com/showthread.php?t=1886460
1.) Download attached file from above link.
2.) Extract it
3.) Double click the RunMe.bat and follow instructions!
hit thanks if it helped you.
Click to expand...
Click to collapse
hi
my phone is not getting detected after running runme.bat,I am sure its caue of drivers but I cud nt found it anywhere please some one Help..and also can we use other mediatech custom roms on these one
I have samsung and htc mobile drivers installed so it detected, not sure which one works.
How to install adb driver...
matharuajay said:
I have samsung and htc mobile drivers installed so it detected, not sure which one works.
Click to expand...
Click to collapse
Use the Adb Driver Installer to install drivers supported by your device from the following link. I just used it to install and root my Andi 5c. It installed HTC drivers for my iball device.
http://forum.xda-developers.com/showthread.php?t=2091922
pulak said:
Use the Adb Driver Installer to install drivers supported by your device from the following link. I just used it to install and root my Andi 5c. It installed HTC drivers for my iball device.
http://forum.xda-developers.com/showthread.php?t=2091922
Click to expand...
Click to collapse
Thanks Seems like this might work..will give it a try as sme time soon
And is there any Kernel Custom rom available, which i doubt . i cud not find any one so far
adi.borndevil said:
Thanks Seems like this might work..will give it a try as sme time soon
And is there any Kernel Custom rom available, which i doubt . i cud not find any one so far
Click to expand...
Click to collapse
hey.. i have successfully rooted my andi 4.5h.. u install samsung drivers ur phone will be detected..
What about cwm recovery?
How to root iball and4.5h
being a layman would like to know where do i download the file in my computer or the mobile phone. tried to run runme.bat on the phone but it does not recognize the file type. please advise
matharuajay said:
http://forum.xda-developers.com/showthread.php?t=1886460
1.) Download attached file from above link.
2.) Extract it
3.) Double click the RunMe.bat and follow instructions!
hit thanks if it helped you.
Click to expand...
Click to collapse
This method is not working on iball andi 4.3j +
cwm recovery
cwm recovery please................
recovery
hi guys i found this tutorial to install recovery for any mtk6577 phones.can anyone try this as iam not a technically sound guy
http://chinagizmos.blogspot.in/2012/10/porting-touch-recovery-for-mt65xx-phones.html
Finally Rooted
Finally Rooted it Successfully.
for Source
just go here : http://skytech101.blogspot.in/2013/02/how-to-root-iball-andi-45h.html
or
Read this tutorial :
1. Download Rooting Kit here : http://www.mediafire.com/?cnvohexs662qvo9
2. Make sure that USB debugging is on your device. To enable go to Settings >Development >USB debugging
3. Extract the Rooting Kit on your PC and connect your phone. Don't turn on USB Storage
4. In the Rooting kit folder you have extracted start the "Runme.bat" file
5. A command prompt will start now
6. Now you will get Onscreen Instructions just follow them carefully.
To start the process just type "1" and then hit Enter. Now you will get the instructions on the command
prompt follow that.
7. Your device will now reboot
Hurray your device is now Rooted..!! Now just enjoy..
Unrooting the phone :- Instep 5 instead of typing "1" type "x" and hit enter. This will Unroot your iBall Andi 4.5h
Stay connected for more updates..
Thanks to Skytech
Note : Its Rebranded Malata i8 Device
Please help in in build.prop
Hello.. i edited build.prop in my iball andi 4.5h in filder system/build.prop .. and it went into boot loop.. can you please give me the file o its contents as your phone is ooted and working?? Please help
Help Needed
Hello.. i edited build.prop in my iball andi 4.5h in filder system/build.prop .. and it went into boot loop.. can you please give me the file o its contents as your phone is ooted and working?? Please help
I want to customize my andy 3n can any1 give me rom and rooting process
Hi all, i made a terrible mistake and installed cyanogen 10 for nexus 7 on my protab2xxl tablet.
Is there any way to save my tablet?
Cant use touchscreen so im using mouse/keyboard, but i tried 100 ways to fix it and cant do it.
Recovery mode always goes to Android 3e and not CWM, so im getting "signature verification failed" error
and i cant install the correct cyanogen mod.
Also tried with nexus tool without any luck.
If anybody can help, it would be much appreciated. I will PayPal $10 if somebody helps me to fix this tablet.
OK....
Try this method it will help you
1)Download ADT (android download tool)
2)Download and install all usb drivers of ur device.
3)Boot into download mode .
4)connect usb.
5)DONT DO ANYTHING ELSE. STATED.
IN ERASE TICK
BOOT
SYSTEM
USERDATA
RECOVERY.
Click begain
Then download a compitable recovery cmw of ur device
Then open adt and in ARM11
tick recovery and browse recovery.img click begain.
It will flash the recovery
now reboot to recovery and flash any rom of ur choice.
Hit thanks....
yash.pranjale86 said:
OK....
Try this method it will help you
1)Download ADT (android download tool)
2)Download and install all usb drivers of ur device.
3)Boot into download mode .
4)connect usb.
5)DONT DO ANYTHING ELSE. STATED.
IN ERASE TICK
BOOT
SYSTEM
USERDATA
RECOVERY.
Click begain
Then download a compitable recovery cmw of ur device
Then open adt and in ARM11
tick recovery and browse recovery.img click begain.
It will flash the recovery
now reboot to recovery and flash any rom of ur choice.
Hit thanks....
Click to expand...
Click to collapse
i have no idea how to do steps 2 and 3
do i need now drivers for nexus 7 or protab2xxl?
how to install them? i tried with live suite but its not recognizing the tablet.
how to boot into download mode?
Go to official site of ur device and download usb drivers of ur device or just google it
These are .exe files install them normally on ur PC
Just search google about the key combination to boot in download mode or search on xda
Or try booting in bootloader and then follow steps below
Sent from my A60 using xda app-developers app
yash.pranjale86 said:
Go to official site of ur device and download usb drivers of ur device or just google it
These are .exe files install them normally on ur PC
Just search google about the key combination to boot in download mode or search on xda
Or try booting in bootloader and then follow steps below
Sent from my A60 using xda app-developers app
Click to expand...
Click to collapse
I downloaded the drivers, but there is no exe files:
i50.tinypic.com/bi0zvd.png
If they are not setup files then they are in which format ?
Are u sure u downloaded correct drivers for correct operating system ex- exe for windows etc
U have to install it on computer with Microsoft windows os
Or follow tutorial for installing drivers on pc go the official site or search Google .
yash.pranjale86 said:
If they are not setup files then they are in which format ?
Are u sure u downloaded correct drivers for correct operating system ex- exe for windows etc
U have to install it on computer with Microsoft windows os
Or follow tutorial for installing drivers on pc go the official site or search Google .
Click to expand...
Click to collapse
I use Windows 7 64
I downloaded the lates firmware: 10 inch TAB-PROTAB2XXL(4.1)-Android 4.0-20120409.zip
Inside there are 3 folders: LiveSuite, 10 inch TAB-PROTAB2XXL(4.1)20120409, UsbDriver
In UsbDriver there are 7 files and non of them is .exe:
usbdrv.inf
usbdrv.sys
usbdrv_AMD64.sys
usbdrv_IA64.sys
usbdrvi64.cat
usbdrvx64.cat
usbdrvx86.cat
I also tried to install with "Device Manager", but when i click on UsbDriver it gives me empty folder.
Sorry i cant post image links. I dont have 10 posts yet.
Download this PDF file
It contains all the instructions
Its ur device official tutorial given by company.
Will work 100% for you
Download link
downloads.pointofview-online.com/Dr...are upgrade Mobii 10 Inch ProTab2XXL V1 3.pdf
IF THIS DOES NOT WORK JUST INSTALL THE USB DRIVERS AS GIVEN IN PDF THEN FOLLOW MY TUTORIAL ABOVE.
Hope ur problem gets solved as soon as possible.
yash.pranjale86 said:
Download this PDF file
It contains all the instructions
Its ur device official tutorial given by company.
Will work 100% for you
Download link
downloads.pointofview-online.com/Dr...are upgrade Mobii 10 Inch ProTab2XXL V1 3.pdf
IF THIS DOES NOT WORK JUST INSTALL THE USB DRIVERS AS GIVEN IN PDF THEN FOLLOW MY TUTORIAL ABOVE.
Hope ur problem gets solved as soon as possible.
Click to expand...
Click to collapse
I think im going to break the fking thing. Im on the edge of my nerves.
I manage to reset it to its original android 4.03 and touchscreen is working now, but
still getting the same "signature verification failed" error when in recovery mode 3e.
Also, tablet is not recognized by ROM Manager CWM, so booting to that recovery and
toggle between signature verification option is not an option.
I think there is no "download mode" on this tablet.
Anything else that you suggest? Im running out of options and the tablet already
received couple of punches. Not sure how long is going to last.
i guess download mode is the recovery mode? When android is on his back?
Anybody got any advice?
SuperOneClick says that my tablet is rooted, but SuperUser cant gain root access. Also i installed Titanium Backup and its same, cant gain access to the root.
What else can i try? Is this tablet lost?
Did u tried to install the USB drivers from the method given in PDF file
Use z4root to root ur tablet.
Thank You Yash for all your help. Finally managed to install Cyanogenmod.
So wow ur done ......
Sent from my A60 using xda app-developers app
Finally rooted the phone using Kingroot. Now advancing towards porting a custom recovery for the device. The needed files are stock boot.img and recovery.img of the device. My problem is I have tried all the following ways for their extraction -
1) RomDump script 0.72b by Sebastian404
2) cat proc/mtd
3) log_data to find in which partition the recovery belongs to
But no luck, for all.
anybody, who can help me?
Please don't suggest adb process.
aakashabhinav said:
Finally rooted the phone using Kingroot. Now advancing towards porting a custom recovery for the device. The needed files are stock boot.img and recovery.img of the device. My problem is I have tried all the following ways for their extraction -
1) RomDump script 0.72b by Sebastian404
2) cat proc/mtd
3) log_data to find in which partition the recovery belongs to
But no luck, for all.
anybody, who can help me?
Please don't suggest adb process.
Click to expand...
Click to collapse
If u have rooted your phone thn download flashify and backup boot img and recovery img from there.. Thn it will be in your sdcard flashify folder
Hope it helps
Regards
my phone was bricked how to solve this problem
my coolpad dazen 1 was bricked after flashing recovery.img after rooted..
and it got error like "download and instal the packag? this may expose the device falt and hidden troubles."
please help it's urgent... :angel:
use bootloader to flash stock recovery
Bibhudutta Das said:
my coolpad dazen 1 was bricked after flashing recovery.img after rooted..
and it got error like "download and instal the packag? this may expose the device falt and hidden troubles."
please help it's urgent... :angel:
Click to expand...
Click to collapse
i was having the same problem
i tried flashing cwm recovery which was for coolpad f1 plus (as it is same device with qualcomm processor)
and after flashing my device was unable to boot (or stuck on bootloader)
but it can be cured....
you have to download the batch program developed by cool community
and dazen 1 adb drivers
(you will need the stock recovery to put back your device to life)
replace both the given recoveries in the batch program folder with stock recovery and rename it
then enter bootloader mode (both volume buttons+power button)
open batch program on your pc and press 1 and click enter
now connect your device to pc and press vol. up button to continue
and its done.
now I am trying to flash a stable recovery
I am new to Xda so sorry in advance if i missed something
feel free to ask.....
Full guide for unbrick dazen 8297L-100
In the attachment there are stock boot and recovery images and link for downloadin the cool comunity batch programe
jaswant singh said:
In the attachment there are stock boot and recovery images and link for downloadin the cool comunity batch programe
Click to expand...
Click to collapse
where is the attachment?? plz help..
bonny1256 said:
i was having the same problem
i tried flashing cwm recovery which was for coolpad f1 plus (as it is same device with qualcomm processor)
and after flashing my device was unable to boot (or stuck on bootloader)
but it can be cured....
you have to download the batch program developed by cool community
and dazen 1 adb drivers
(you will need the stock recovery to put back your device to life)
replace both the given recoveries in the batch program folder with stock recovery and rename it
then enter bootloader mode (both volume buttons+power button)
open batch program on your pc and press 1 and click enter
now connect your device to pc and press vol. up button to continue
and its done.
now I am trying to flash a stable recovery
I am new to Xda so sorry in advance if i missed something
feel free to ask.....
Click to expand...
Click to collapse
Hello Friend,
Please post the download link for the
1 . stock rom
2. stock recovery
3. and the batch program which you have mentioned.
4. dazen 1 adb drivers
and any other resources which you used to bring your dazen out of brick.
Thanks
Finally fixed my dazen 1.....
Ho....ffff......
Finally managed to bring my dazen back to life... Thanks to bonny1256 for the information..
Found the batch script after serching all forums almost searched down all internet..
Used the recovery that i had backed up using flashify.. I will upload the stock recovery and link to the tool. Shortly... Once again thanks to @bonny1256..
---------- Post added at 12:58 AM ---------- Previous post was at 12:54 AM ----------
The recoveries in the zip is for coolpad F1 plus which need to be replaced by the stock recovery of dazen 1...
---------- Post added at 01:27 AM ---------- Previous post was at 12:58 AM ----------
stock recovery: https://drive.google.com/file/d/0By_nubQ5FzzoSnBiSl9JaGR1YW8/view?usp=sharing
Drivers: http://download.yulong.com///DOWNLOAD_INFO/20141203151613244(4).rar
Note:: this tool will temporarily install recovery.. So after reboot flash the recovery with flashify for a properly working recovery in your phone..
regards..
techy97 said:
Finally rooted the phone using Kingroot. Now advancing towards porting a custom recovery for the device. The needed files are stock boot.img and recovery.img of the device. My problem is I have tried all the following ways for their extraction -
1) RomDump script 0.72b by Sebastian404
2) cat proc/mtd
3) log_data to find in which partition the recovery belongs to
But no luck, for all.
anybody, who can help me?
Please don't suggest adb process.
Click to expand...
Click to collapse
Try..
adb shell
cat /proc/partitions
Or
adb shell
ls -al /dev/block/platform/7824900.sdhci/by-name
need to know partition details of dazen 1
bonny1256 said:
i was having the same problem
i tried flashing cwm recovery which was for coolpad f1 plus (as it is same device with qualcomm processor)
and after flashing my device was unable to boot (or stuck on bootloader)
but it can be cured....
you have to download the batch program developed by cool community
and dazen 1 adb drivers
(you will need the stock recovery to put back your device to life)
replace both the given recoveries in the batch program folder with stock recovery and rename it
then enter bootloader mode (both volume buttons+power button)
open batch program on your pc and press 1 and click enter
now connect your device to pc and press vol. up button to continue
and its done.
now I am trying to flash a stable recovery
I am new to Xda so sorry in advance if i missed something
feel free to ask.....
Click to expand...
Click to collapse
hi @bonny1256
plz help me know the system partition of coolpad dazen 1..
run this
adb shell
ls -al /dev/block/platform/7824900.sdhci/by-name
i had used it to dump system.img.. i am stuck in bootloop after ota..
plz run the command and upload screenshot...
thanks..
Please send the boot.img and recovery.img for coolpad dazen 1.
My mail id is [email protected]
Send Image
Send me the stock recovery and the boot image with instructions on how to get stock rom on my dazen1 pls send it at [email protected]
hi my dazen 1 is showing waiting for the device after using all this... can any one please help me to get correct procedure. please share complete procedure with required software and links @ [email protected]
Please help to recover my phone. It was rooted using Kingroot and while installing OTA update it got bricked.
Is any way to flash full rom or firmware in our device
hey guyss,,,
Sent from my Coolpad 8297L-I00 using XDA Premium 4 mobile app
---------- Post added at 06:20 PM ---------- Previous post was at 06:16 PM ----------
ArjunrambZ said:
hey guyss,,,
Sent from my Coolpad 8297L-I00 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
we need to start a new team for our phone ,so that development can be started
please comment below if ur interested
thanks
Sent from my Coolpad 8297L-I00 using XDA Premium 4 mobile app
Hi, I have rooted my dazen 1 , now waiting for custom recovery and ROMs to test
vishwasnp said:
Hi, I have rooted my dazen 1 , now waiting for custom recovery and ROMs to test
Click to expand...
Click to collapse
did you root using kingroot ?
Yes, used Kingroot
I am facing lots of issues with call log and sms , they suddenly don't update or become non responsive. Any way to replace them ?
Please help me I want to install custom recovery on my karbonn titanium MACHFIVE.
This phone running on lollipop 5.0. & it have MediaTek MT6582 1.3 GHz Quad-core processor
&2GB of RAM & 16GB internal memory.
have you rooted your fone
need root
i know machfive is new in the market but really need at least rooting method for it cause it have some bugs though pls pls pls developers we are relaying on you for this
Yes
farhanfarhan32 said:
have you rooted your fone
Click to expand...
Click to collapse
I have rooted phone.
I root with kingroot
mukulkumars13 said:
I have rooted phone.
I root with kingroot
Click to expand...
Click to collapse
kingo root does not worked for me
Use iroot it worked for me
Need recovery for it man..... Xposed is also need to flash zip n i dont hav recovery damn!!
ajju akm said:
Use iroot it worked for me
Click to expand...
Click to collapse
kingo root , iroot , towel root, every thing failed:crying::crying:
I just rooted with iroot windows application.
ashish128 said:
I just rooted with iroot windows application.
Click to expand...
Click to collapse
which version of iroot you used?
root with kingroot
i used kingroot ver. 4.0.0 and it works try it out
after root u can use http://forum.xda-developers.com/showthread.php?t=2379412 to make recovery for ur machfive as it is a mediatek device
hit thanks if i helped
ajju akm said:
i used kingroot ver. 4.0.0 and it works try it out
after root u can use http://forum.xda-developers.com/showthread.php?t=2379412 to make recovery for ur machfive as it is a mediatek device
hit thanks if i helped
Click to expand...
Click to collapse
king root 4.0 worked:laugh:
farhanfarhan32 said:
king root 4.0 worked:laugh:
Click to expand...
Click to collapse
Hi
Just bought this phone for my friend. While trying to root with kingroot v4 and 4.5 its does not works.. Can u tell me ur frmware version number ?
Is there any recovery for this phone Karbonn Titanium Machfive.
Thanks in advance.
Sent from my MACHFIVE using Tapatalk
phone stuck in boot loop after kingroot 4.5. what to do?
model karbonn mach five.
Ya my phone too struck in karnonn logo after updating su binary...
Please anyone provide the factory image of karbonn titanium mach five ASAP..
And also provide instructions for flashing the image
Device: Karbonn Titanium Mach Five
Status: Rooted, No custum recovery installed, Bootloop...
Kingroot 4.0 worked. Rooted successfully
Sent from my MACHFIVE using Tapatalk
Recover KARBONN TITANIUM MACHFIVE
rockybilla007 said:
Ya my phone too struck in karnonn logo after updating su binary...
Please anyone provide the factory image of karbonn titanium mach five ASAP..
And also provide instructions for flashing the image
Device: Karbonn Titanium Mach Five
Status: Rooted, No custum recovery installed, Bootloop...
Click to expand...
Click to collapse
The last week I had a similar issue stuck on KARBONN logo.
I used Stock from XDA Firmware xdafirmware.com/karbonn-mach-five
Download the necessary drivers (a must) .
The downloaded compressed file will have SP flash tool with it .
1 .Open "flash_tool.exe" under "\SP Flash Tool v5.1516" folder (with admin privileges) .
2 .Navigate to the "Download" section .
3. Click on the "Scatter-loading". Browse "MT6582_Android_scatter.txt" under "Firmware" .
4. Now this will give you a list of files to flash that comes from the "\Firmware" folder . Make sure every files load correctly to the list(location can be seen to the right of the item to be flashed) . Especially "Android" which correspond to the system.img file in the \Firmware which I think which actually solves the android system related files' problems.
5. Now Power off your phone .
'''Wait for a sec ( many people advice removing the battery for a while).
6. Now click on the Download sign in the SP flash tool window . Connect your phone with the USB cable immediately and click on the volume up or down for SP flash tool to detect your phone. If the phone gets detected SP flash tool throws some info on the left pane. Then the files will start flashing . Flashing status is provided by a yellow bar at the bottom of the window.
7. After the flash is complete a green ok popup.
8. Boot your phone to recovery and Wipe the cache partition.
9. Restart the phone.
This worked with my MACHFIVE . Wishing you luck :good:.
*Flashing always have a risk of bricking your phone. Think twice before you act . I will not take responsibility.
*Always take any errors in SP flash tool seriously and consult expert advice before continuing
*Even if you are stuck on boot if you have enabled USB debugging you can use adb pull to pull your data from memory.
greentoy said:
The last week I had a similar issue stuck on KARBONN logo.
I used Stock from XDA Firmware xdafirmware.com/karbonn-mach-five
Download the necessary drivers (a must) .
The downloaded compressed file will have SP flash tool with it .
1 .Open "flash_tool.exe" under "\SP Flash Tool v5.1516" folder (with admin privileges) .
2 .Navigate to the "Download" section .
3. Click on the "Scatter-loading". Browse "MT6582_Android_scatter.txt" under "Firmware" .
4. Now this will give you a list of files to flash that comes from the "\Firmware" folder . Make sure every files load correctly to the list(location can be seen to the right of the item to be flashed) . Especially "Android" which correspond to the system.img file in the \Firmware which I think which actually solves the android system related files' problems.
5. Now Power off your phone .
'''Wait for a sec ( many people advice removing the battery for a while).
6. Now click on the Download sign in the SP flash tool window . Connect your phone with the USB cable immediately and click on the volume up or down for SP flash tool to detect your phone. If the phone gets detected SP flash tool throws some info on the left pane. Then the files will start flashing . Flashing status is provided by a yellow bar at the bottom of the window.
7. After the flash is complete a green ok popup.
8. Boot your phone to recovery and Wipe the cache partition.
9. Restart the phone.
This worked with my MACHFIVE . Wishing you luck :good:.
*Flashing always have a risk of bricking your phone. Think twice before you act . I will not take responsibility.
*Always take any errors in SP flash tool seriously and consult expert advice before continuing
*Even if you are stuck on boot if you have enabled USB debugging you can use adb pull to pull your data from memory.
Click to expand...
Click to collapse
Sir thank you so much for replying have been waiting for weeks for the solution..
1)Downloaded the files
2)Installed drivers
3)Started flash tool and loaded scatter file
4)Clicked on download
5)Powered off phone and connected via usb
6)Flashing process started
7)Flashing finished and green ring appeared!!!
8)Device booted after some time.
Thanks again for the solution :good::good::good:
Thanks for the guide.
Did anyone made custom recovery for this phone yet. If anyone has a recovery kindly share here.
Sent from my MACHFIVE using Tapatalk
Hii Guys..
I need the custom TWRP recovery for my LYF water F1S (LS -5201), so that i can root it and install custom ROMs. Developers i request you to do the needful please.
Regards
My phone also f1s.
Did you had any rom-package or recovery.img?
onkarrathee said:
Hii Guys..
I need the custom TWRP recovery for my LYF water F1S (LS -5201), so that i can root it and install custom ROMs. Developers i request you to do the needful please.
Regards
Click to expand...
Click to collapse
Try using this guide
https://forum.xda-developers.com/android/software/guide-how-to-compile-twrp-source-step-t3404024
Guys...i have found a page for the stock rom for LYF water F1s Ls-5201. You can download it from here
I also extracted the stock recovery image from device and here is the link https://drive.google.com/file/d/0BwMCGOjWJuaxY0NSemJ6ZzdNU1U/view?usp=sharing
Also tried the method to make TWRP for LYF water F1_ LS5201 by @suraj-b method.... but not successful yet. For the process i've used twrp recovery of Le 2 x526.
i'm not a developer but it would be my pleasure if whatever i tried, help somebody.
Don't forget to "Hit THANKS..."
onkarrathee said:
Guys...i have found a page for the stock rom for LYF water F1s Ls-5201. You can download them from there http://www.needrom.com/download/lyf-ls-5201/#
I also extracted the stock recovery image from device and here is the link https://drive.google.com/file/d/0BwMCGOjWJuaxY0NSemJ6ZzdNU1U/view?usp=sharing
Also tried the method to make TWRP for LYF water F1_ LS5201 by @suraj-b method.... but not successful yet. For the process i've used stock recovery of Le 2 x526.
i'm not a developer but i would be my pleasure if whatever i tried, help somebody.
Don't forget to "Hit THANKS..."
Click to expand...
Click to collapse
Good job !
How to flash stock firmware to LYF water F1s Ls-5201
Prepare your system-----
1) Install the Qualcomm usb drivers on your system. Download link
2) Check your PC device manager, your phone should be detected in "Qualcomm HS-USB QDloader 9008" mode. It must detect to start the process.
3) Download the stock firmware from here . The software version downloaded with this link is "LS-5201-S10A_LYF_L13EN_200_170124_09-55-13".
4) Extract the downloaded firmware zip to an folder and rename the "IMAGES_FOR_QMSCT" to "firmware".
5) Download & install the QPST tool. Google it you can find it easily.
6) power off your phone & Make sure your device is charged to at least 50%.
7) Run the installed QFIL from installed programmes. Browse in programmer path to the "prog_emmc_firehose_8976_ddr.mbn" file in the folder where firmware is extracted. It will load the firmware & buid will be selected automatically.
8) Click on load xml and select the "rawprogram_unsparse_without_qcn.xml" if you havn't the backup of NV partition of your device.
If you have the backup NV partition of your device than you can select "rawprogram_unsparse.xml" because this will erase your RF Calibration data, IMEI and WiFi/Bluetooth Address etc. and you will have to restore the NV partition after installing the ROM.
I would suggest you to select "rawprogram_unsparse_without_qcn.xml" & keep it simple.
9) Choose the "patch0.xml" after that.
10) Hold the vol+ & vol- key together and plug usb cable to phone to enter into download mode. As you plug in the QPST tool would recognise your device in QDLoader 9008 mode with com port no. and download button will get activated.
11) Click the download button and sit back, it will take some time.
12) "finish dowload" appear, when process got completed and phone will reboot automatically.
13) Disconnect the device from PC one "android screen" appears (usually it takes 5 min. to appear LYF logo screen from android boot screen)
14) If doesn't reboots, there is some problem & get ready for real hard work .
You might have bricked. In this case just press the power button so than it can power ON. If android screen appears you are lucky enough
-----If android screen remains more than 6-8 minute, you are in bootloop. (It useually takes 5 min for LYF logo to appear after android logo)
-----To switch off your device in case of bootloop, press vol+, vol- & power key together for some time. It will switch off.
-----try to flash the firmware again by above process.
I have tested this method on my device and successfully flashed the stock firmware.
Don't forget to "HIT thanks"...!!!
Credit:
@[email protected] for providing the stock firmware
Me: for testing the procedure
Le2 not support MicroSd.
I will try use recovery of oppo R9plus.
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/open?id=0BwVjewgp3fvLbmtxZ21fSUZhOW8
Or download full package with flash tools and supersu.zip [URL="https://drive.google.com/open?id=0BwVjewgp3fvLUnRHS3NGRjlIRTQ]TWRP-OneKeyFlash-supersu-lyf-water-f1s.rar[/URL]
TWRP recovery LYF_LS-5201
Guys... here is the unofficial twrp recovery for LS-5201. Download it here .
Let me know that you suceed..
This is twrp_unofficial_3.1.0.0 ported from Leeco Le2's TWRP recovery using @suraj-b method and if anythong goes wrong on your device download the stock recovery from the thread and flash it from bootloader.
Try on your own risk..!! :fingers-crossed:
Don't forget to HIT "Thnanks" down there
Please share the adb & fastboot files you used for unloacking bootloader and flashing recovery for the noobs. It would help.
keep it up. :good:
zjsss said:
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/file/d/0BwVjewgp3fvLRm9IM0FOcTF1aGc/view?usp=sharing
Click to expand...
Click to collapse
zjsss said:
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/file/d/0BwVjewgp3fvLRm9IM0FOcTF1aGc/view?usp=sharing
Click to expand...
Click to collapse
How to flash it bro...plzzz give us step by step help
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
zjsss said:
Okey.
It works and rooted by supersu system less package.
I shared recovery.img on https://drive.google.com/file/d/0BwVjewgp3fvLRm9IM0FOcTF1aGc/view?usp=sharing
Click to expand...
Click to collapse
If i flash it via fastboot...den can i root it through twrp...
prashant.palange said:
How to flash it bro...plzzz give us step by step help
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
If i flash it via fastboot...den can i root it through twrp...
Click to expand...
Click to collapse
You can download full package and use "OneKeyFlash(LYF-f1s).bat" to flash easier TWRP-OneKeyFlash-supersu-lyf-water-f1s.rar
zjsss said:
You can download full package and use "OneKeyFlash(LYF-f1s).bat" to flash easier TWRP-OneKeyFlash-supersu-lyf-water-f1s.rar
Click to expand...
Click to collapse
Bro but is it proper twrp for f1s...hv u try it
prashant.palange said:
Bro but is it proper twrp for f1s...hv u try it
Click to expand...
Click to collapse
It works well on my phone.
zjsss said:
It works well on my phone.
Click to expand...
Click to collapse
Thnk u soo much to bring us such wonderfull recovery....but bro...i found 2 issue....1 internal storage is showing empty 0mb and 2 der is no option for root like supersu.zip..plzz help me for dat...m i done wrong anything..plzzz help thank u sooo much brother...it doesn't mount internal storage..i tried mound system and data....but data doesn't mount...plzz help..hope u will understand
prashant.palange said:
Thnk u soo much to bring us such wonderfull recovery....but bro...i found 2 issue....1 internal storage is showing empty 0mb and 2 der is no option for root like supersu.zip..plzz help me for dat...m i done wrong anything..plzzz help thank u sooo much brother...it doesn't mount internal storage..i tried mound system and data....but data doesn't mount...plzz help..hope u will understand
Click to expand...
Click to collapse
It's my bad. This img had bugs.I well try to fix it.
You can copy supersu.zip to MircoSD and install it in TWRP rigtht now.
I checked by adb shell root is success.
Very sorry about that.
zjsss said:
It's my bad. This img had bugs.I well try to fix it.
You can copy supersu.zip to MircoSD and install it in TWRP rigtht now.
I checked by adb shell root is success.
Very sorry about that.
Click to expand...
Click to collapse
U r simply genius brother..root works properly.....god bless u ..love u ....:laugh::good:
Just try to make bugless twrp....thnk u in advance....
prashant.palange said:
U r simply genius brother..root works properly.....god bless u ..love u ....:laugh::good:
Just try to make bugless twrp....thnk u in advance....
Click to expand...
Click to collapse
Thx,i found this not a bug.
/data was locked by system.
Into twrp and keep /system read only,
And wipe /data will be ok .
but it will lost all your data in the phone!!!
So backup everything before you do it.
and install supersu .zip again to root.
zjsss said:
Thx,i found this not a bug.
/data was locked by system.
Into twrp and keep /system read only,
And wipe /data will be ok .
but it will lost all your data in the phone!!!
So backup everything before you do it.
and install supersu .zip again to root.
Click to expand...
Click to collapse
So what should i wipe...dalvik, cache, and data dats it..okay....not system...m i right? But data is not mounting den how can i wipe it?
prashant.palange said:
So what should i wipe...dalvik, cache, and data dats it..okay....not system...m i right? But data is not mounting den how can i wipe it?
Click to expand...
Click to collapse
It doesn't matter of wipe /date or wipe 3.
I guess because the phone kernel was rooted.TWRP had right of wipe.
But not so sure that.