Hey all,
I started messing around with the stock rom I got from this thread http://forum.xda-developers.com/showthread.php?t=2080200
Pretty much all I did was pull some apk's from system/app and now after booting, my screen will occasionally flicker.
I did some digging on the forums here, and the only work around I could find is to disable hw overlay.
Is there a fix for this? Anyone else have this problem?
Thanks
Sounds like your using an old kernel on that updated rom. If you are going to use a 2.04 rom you have to use the stock 2.04 kernel.
Sent from my HTC6435LVW using xda app-developers app
Bigandrewgold said:
Sounds like your using an old kernel on that updated rom. If you are going to use a 2.04 rom you have to use the stock 2.04 kernel.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
I am currently using crpalmers's kernel. I also tried the stock 2.04 kernel that came packaged with the stock rom
rjd584 said:
I am currently using crpalmers's kernel. I also tried the stock 2.04 kernel that came packaged with the stock rom
Click to expand...
Click to collapse
Crpalmers kernel will not work. Flash the stock kernel and be sure you fully flash it(both parts)
Sent from my HTC6435LVW using xda app-developers app
Bigandrewgold said:
Crpalmers kernel will not work. Flash the stock kernel and be sure you fully flash it(both parts)
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Sorry, I'm a bit new to this, both parts? All I have is a boot.img
Edit: Flashing kernel and modules....
Bigandrewgold said:
Crpalmers kernel will not work. Flash the stock kernel and be sure you fully flash it(both parts)
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Running stock kernel now. No flicker. Thanks a lot for your help.
Related
So I have been using ICS Crumble which it has it's own kernal. And Now I want to use a different rom that uses a different kernal. How would I do this safely?
If it is a CM9 ROM from the development forum then you can just flash it. The kernel will be replaced automatically
Sent from my Nexus 7 using XDA Premium HD app
Supermaster34 said:
If it is a CM9 ROM from the development forum then you can just flash it. The kernel will be replaced automatically
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
But wouldn't that cause boot looping if i use odin since after I'm done it'll reboot? Or should I just use
Recovery to put them both? If so should I do the kernal first?
Sent from my YP-G70 using xda app-developers app
Which ROM are you trying to flash? If it is Odin flash able then it will just replace the kernel you currently have. You will only have issues if you flash a ROM without an inbuilt kernel
Sent from my Nexus 7 using XDA Premium HD app
Supermaster34 said:
Which ROM are you trying to flash? If it is Odin flash able then it will just replace the kernel you currently have. You will only have issues if you flash a ROM without an inbuilt kernel
Sent from my Nexus 7 using XDA Premium HD
Thanks man. I got it.
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
Hey guys , I used CWR to flash viper DNA 1.0.1 on my DNA and i flashed LK kernel. Now everything is ok just my WIFI says all the time " Turning on Wi-Fi ..." and it runs like taht for 30 min and goes to error.....any help ? Im new to flashing......
You have to flash both parts of the kernel.
Sent from my HTC6435LVW using xda app-developers app
tyracz said:
Hey guys , I used CWR to flash viper DNA 1.0.1 on my DNA and i flashed LK kernel. Now everything is ok just my WIFI says all the time " Turning on Wi-Fi ..." and it runs like taht for 30 min and goes to error.....any help ? Im new to flashing......
Click to expand...
Click to collapse
Like bigandrewgold said. Kernel and modules. When you flashed viper it has the modules for dsbsrw kernel, so you need to flash the modules for lk's kernel
Sent from my HTC6435LVW using Tapatalk 2
I do install Rom with CWR and than I use flash gui for kernel,is that tighy?y
Sent from my HTC6435LVW using xda app-developers app
tyracz said:
I do install Rom with CWR and than I use flash gui for kernel,is that tighy?y
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
If you want to use lk kernel then flash the ROM. Then flash the boot.img in flash image GUI. Than go back to recovery and flash the modules for lk kernel.
Sent from my GT-P7510 using xda app-developers app
Got it!!I guys awesome!!
Sent from my HTC6435LVW using xda app-developers app
I'm having issues with my WiFi trying to inniate and the finally says error.....I'm currently on viper Rom and have the boot.img a few times with no luck. I've also used the stock kernal modules and my phone still has this problem...I've seen a few threads about WiFi and have explored the resolutions but they do not work for me nor do the situations in those threads match my phones symptoms.....any guidance would be much appreciated......
Sent from my HTC6435LVW using xda app-developers app
Did you flash the kernel modules in recovery after installing the kernel?
Yes and I have done the boot img first and then modules and reversed process as well but still showing error
Sent from my HTC6435LVW using xda app-developers app
Go to a kernels thread.
Download the zip
Extract the zip.
Flash the boot.img
Flash the modules.zip
You how have working WiFi.
Sent from my HTC6435LVW using xda app-developers app
What version of Viper are you using?
I had the same problem and extracted the boot.img from the viperDNA_1.1.0.zip (might have been a bad download unsure I didn't check the md5)
I also did a factory reset and wiped cache in recovery and aroma. Version 1.1.0 doesn't like a dirty flash.
The same thing is happening to me
This is the first android phone, so I do not have much experience in custom ROMs and that sort. A friend of mine led me through making a backup of my phone and I flashed the newest version of Viper, and thought everything was okay until I noticed that the WiFi wouldn't turn on. I then restarted the phone, reflashed the ROM, and then flashed another ROM. Every single time the WiFi wouldn't work. I finally gave up and restored to the backup that I made, and my WiFi works with it. Any suggestions on how to get Viper installed with working WiFi? I really enjoyed it.
ICruentusI said:
This is the first android phone, so I do not have much experience in custom ROMs and that sort. A friend of mine led me through making a backup of my phone and I flashed the newest version of Viper, and thought everything was okay until I noticed that the WiFi wouldn't turn on. I then restarted the phone, reflashed the ROM, and then flashed another ROM. Every single time the WiFi wouldn't work. I finally gave up and restored to the backup that I made, and my WiFi works with it. Any suggestions on how to get Viper installed with working WiFi? I really enjoyed it.
Click to expand...
Click to collapse
You have to flash the boot.img that is in the viper Rom thread.
Sent from my HTC6435LVW using xda app-developers app
Bigandrewgold said:
You have to flash the boot.img that is in the viper Rom thread.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
I have flashed thru flash gui app and done it thru manually, no luck
Sent from my HTC6435LVW using xda app-developers app
mkzbdroid said:
I have flashed thru flash gui app and done it thru manually, no luck
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Where were you getting the boot.img from.
Sent from my HTC6435LVW using xda app-developers app
Bigandrewgold said:
Where were you getting the boot.img from.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Directly from the viper Rom thread
Sent from my HTC6435LVW using xda app-developers app
Does anyone know where I can find the stock rom for the US Player 5.0? Thanks!
Sent from my SCH-I535 using xda app-developers app
http://forum.xda-developers.com/showthread.php?p=39188127
Ok thanks!
Sent from my SCH-I545 using xda app-developers app
When I try to flash it thru odin, it starts a little then sits and doesn't do anything. (see pics)
Sent from my SCH-I545 using xda app-developers app
I forgot that that doesn't work for some reason. I'll try to find the stock ROM, if I can. The closest thing may be 2.3.6 though.
TheKryptonite said:
I forgot that that doesn't work for some reason. I'll try to find the stock ROM, if I can. The closest thing may be 2.3.6 though.
Click to expand...
Click to collapse
Can I flash it thru cwm recovery?
Sent from my SCH-I545 using xda app-developers app
fastfive said:
Can I flash it thru cwm recovery?
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
You can try it, but I'm not sure if it'll work. Unless you're asking me if you can flash 2.3.6, in which case, the answer is yes. In case something goes wrong, you may want to backup.j
Here is the stock U.S. - 2.3.5 ROM.
http://www.4shared.com/rar/XkZ-pDCc/YP-G70_UEKI8_MIN.html?
Note: this is the kernel and system.rfs only.
Note: original kernel did not support ext4.
NEVER USE INCLUDED PIT FILE!
Meticulus said:
Here is the stock U.S. - 2.3.5 ROM.
http://www.4shared.com/rar/XkZ-pDCc/YP-G70_UEKI8_MIN.html?
Note: this is the kernel and system.rfs only.
Note: original kernel did not support ext4.
NEVER USE INCLUDED PIT FILE!
Click to expand...
Click to collapse
Lol, I think that's what he downloaded.
Yeah, your right... The only reason, I can think of, that it wouldn' t work is if he ghetto lagfixed... I created that file and have used it plenty of times and it should work....
Meticulus said:
Here is the stock U.S. - 2.3.5 ROM.
http://www.4shared.com/rar/XkZ-pDCc/YP-G70_UEKI8_MIN.html?
Note: this is the kernel and system.rfs only.
Note: original kernel did not support ext4.
NEVER USE INCLUDED PIT FILE!
Click to expand...
Click to collapse
Thanks! And flash it w / odin?
Sent from my SCH-I545 using xda app-developers app
Yes and let me know how it goes...
What ROM are you flashing back to stock from? If I may ask.
And are you still having issues getting it to load?
Meticulus said:
Here is the stock U.S. - 2.3.5 ROM.
http://www.4shared.com/rar/XkZ-pDCc/YP-G70_UEKI8_MIN.html?
Note: this is the kernel and system.rfs only.
Note: original kernel did not support ext4.
NEVER USE INCLUDED PIT FILE!
Click to expand...
Click to collapse
It says link is invalid....
Sent from my SCH-I545 using xda app-developers app
fastfive said:
It says link is invalid....
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
My apologies, had the file marked as private. Fixed now...
Flashed it and now player is stuck in bootloop.
Sent from my SCH-I545 using xda app-developers app
HOG1csmith said:
What ROM are you flashing back to stock from? If I may ask.
And are you still having issues getting it to load?
Click to expand...
Click to collapse
I had Slimbean 4.2.2 on it but the camera didn't work.
Sent from my SCH-I545 using xda app-developers app
fastfive said:
I had Slimbean 4.2.2 on it but the camera didn't work.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
You should try booting to recovery and wipeing cache and data... You probably still got some jelly bean stuff foating around. Might want to flash a kernel too. Entrophy's daily driver if U.S; rj's if INT.
Any success because I'm in the same boat you are but just thinking about buying a new one. I feel like it's going to be extremely to complicated to fix.
Sent from my GT-I9300 using xda app-developers app
Nope. No luck...
Sent from my SCH-I545 using xda app-developers app
So I flashed the Dirty Unicorn ROM that is apparently AOSP and Android 4.3.1. They have a custom kernel you can install that allows you to do many awesome features. I'm new to android and don't know much about these things, so my question is can anyone help me by telling me how do I install that custom kernel? Thanks!
Sent from my SCH-I545 using xda app-developers app
Download and flash it like any ROM.
prshosting.org
I'm pretty sure Dirty Unicorns comes with the kernel built in.
blackra1n said:
So I flashed the Dirty Unicorn ROM that is apparently AOSP and Android 4.3.1. They have a custom kernel you can install that allows you to do many awesome features. I'm new to android and don't know much about these things, so my question is can anyone help me by telling me how do I install that custom kernel? Thanks!
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Go to the ktoonsez thread OP and look for old builds link by luigibull23 get the 11/4 aosp 4.3 build for verizon. Runs wonderful on this rom. Imo
Sent from my SCH-I545 using xda app-developers app
prsterero said:
Download and flash it like any ROM.
prshosting.org
Click to expand...
Click to collapse
So just go to CWM Recovery and flash it? Would I need to wipe everything again even though I'm already on the ROM?
Sent from my SCH-I545 using xda app-developers app
blackra1n said:
So just go to CWM Recovery and flash it? Would I need to wipe everything again even though I'm already on the ROM?
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Yes to the first part and no to the second. You could just wipe caches after flashing it, but even that isn't needed.
prshosting.org
Okay sweet. Thanks!!
Sent from my SCH-I545 using xda app-developers app