hello ,
Firstly , i would thank every one here for helping people , and i hope god give you a good health
my problem is :
i have re-partition a pit file from odin 3.04 , put i have selected a wrong Pit File , After that the phone wouldn't work or swich on again , and i can't login into Download mode , and it not connect to my laptop , as a died thing ,
and there no center in my city can help me or repaire it , so please any one try to help me ,
last thing , can the usb Jig help me in this problem or not
Phone : Samsung Galaxy S2
Model : GT-I9100
Sorry for my Bad Language , i'm not very good in english , and Thank you again, even if you are not able to help me
A jig probably won't help you, but you can try
But why would you want to flash random pit files?
Sent from my gt-9100 powered by dorimanx
You can thank me if i helped you
Sorry to tell you, but if jig wont get you to download mode - the phone is hardbricked. In that case, only a main board replacement will get the phone running.
If you can't go to any service center, perhaps there are phone shops in your area that can fix phones.
Also, you can sell the device on eBay (or any other 2nd hand site/store) as famaged phone, for parts.
Edit: spelling is hard.
Sent from my digital submersible hovercraft.
oh my god
How much it will cost if i repair it ? , and is there any box can fix it without replace any thing in the mobile ?
Thank You For Your Time
i have did that by mistake
DubAholic said:
A jig probably won't help you, but you can try
But why would you want to flash random pit files?
Sent from my gt-9100 powered by dorimanx
You can thank me if i helped you
Click to expand...
Click to collapse
i have did that by mistake
If you can't get into download mode, then the jig won't help. I believe it is only for people with broken hardware buttons.
Are you sure you can't get into any mode? Download (volume down+home+power) and recovery (volume up+home+power)? Make sure you hold them for ten-ish seconds or until you see the Samsung GT-i9100 bootscreen.
Put your phone to a charger for 3-4 hours even though it may seen to not charge.
Try booting into download mode now .
If this doesn't work borrow/buy/make a jig . That is your last option .
Sent from my GT-I9100 using Tapatalk 2
Related
Well, today I installed new ROM, and I don't realy understand in those things, so I did as was in intstructions, few minutes ago, I turned it off, tried to turn it on and its not turning again!
What to do? I am sure it is bircked, and if my parents will know they will kill me!!
I bought the phone 3 weeks ago (( please help
I could get it to work with Odin.. I plugged the USB with the phone and ODIN showed yellow thing on it with port working... But I Cant get it in download mode
please help me!
Here are some questions so that we might be able to help you:
-What exact model do you have? 5660 or 5660M (Bell Canada variant)?
-What exactly did you try to flash?
-To get your phone in download mode, did you try the "three button combo"? meaning: volume down, home and power all at the same time.
-Are you sure that whatever you're going to try and flash this time is going to be suitable for your phone?
Good luck,
Darkshado
S5660 GT
ROM
Yes I tried
Well yes
Odin recognizes the phone but I can't get it to download or rescovery mode, it is not even flashing. What should I do? Please help me!! it is urgent, my parents will kill me!!
The screen is black, no downloade mode, no rscovery, i tried all combinations, i plugged usb and the phone and Odin detected it... i guess it is fully bricked
i bought phone few weeks ago ((((((((((((((((( nowi have no phone and i afraid to tell my parents what to do plz help
Does anyone know if a USB jig like those used on the Galaxy S and Nexus S series would work to get his phone in download mode?
Make I should go to the company and maybe they will can fix it? Should I tell my parents tomorow or got solution?
Hi , i want to ask about my phone cant turn on after using odin 1 click downloader..i try soft reset & hard reset before but still cant turn on ..need help pls
Have you tried removing the battery? If not, try it. Wait a few seconds before reinstalling the battery.
Do you get into DL-mode? Maybe try using a jig.
Arrow MY Galaxy S II I9100G cant turn on
i have removing my battery and try get into DL-mode..but it cant turn on...hmm.. hve to buy usb jigg tomorrow
...but black screen or what?
Try to check this tutorial :
http://forum.xda-developers.com/showthread.php?t=1619571
firstly, remove your battery about 5 minutes or less, then put it on and try to use 3 button again. connect your device to computer with your cable. hope can fix your problem
i m facing same problem in gt i9100G
after using odin my phone cant open donwloading mode using (volume-,home key,power key) then what to do?
i am tired of removing battery thousand time
please help frendsssssssssssss
Try a jig. For me it worked perfectly.
Try the jig
most of the time the USB jig work out just fine and should get u out this problem
Connect it to PC and try to see if ODIN find it, in case you can flash the phone with the right firmware
Are you flashing 9100 Firmware on 9100G
stealthmovic said:
Hi , i want to ask about my phone cant turn on after using odin 1 click downloader..i try soft reset & hard reset before but still cant turn on ..need help pls
Click to expand...
Click to collapse
Does this somehow look like a questions forum to you??
NO. This is a developer forum for developments , not for n00bs to basic crap.
You want to do this first search, look at sticky topics and then go to the dedicated questions forum which surprisingly is for "questions".
briccked i9100g?
stealthmovic said:
Hi , i want to ask about my phone cant turn on after using odin 1 click downloader..i try soft reset & hard reset before but still cant turn on ..need help pls
Click to expand...
Click to collapse
have you tried to flash a kernel? if you havent try it(you dont need to get to download mode) ,and if it still does not repair then usb jig would be needed.
Hello All
i have make a misstake with my Galaxy S2 (i9100) this is already rooted , and the CFW is JB 2.5 , i have download the 2.7 and do a factory reset /wipe reset , when the phone has rebooted , he will not start , nothing , i have try volume down home and power also .. is dead
Any Idea ?
i hope is not bricked QQ
camiela said:
Hello All
i have make a misstake with my Galaxy S2 (i9100) this is already rooted , and the CFW is JB 2.5 , i have download the 2.7 and do a factory reset /wipe reset , when the phone has rebooted , he will not start , nothing , i have try volume down home and power also .. is dead
Any Idea ?
i hope is not bricked QQ
Click to expand...
Click to collapse
Firstly, wtf is JB 2.7??
If you cant power on your device try using USB Jig. If that doesnt work then its flucked and needs a new motherboard.
What exactly is a JB 2.5?
Sorry if is not clear
i have use this
http://forum.xda-developers.com/showthread.php?t=1436854
and update my first rom (2.5 to 2.7)
After this i have restart , and nothink happend after this ..
i have buy the Jig USB , and try (this morning) nothing .. the S2 don't start anything ..
what i can do after this ? the Emergency start don't work , jig usb don't work .. i'm totaly lost
i hope anyone here can me help ?.??.?
If the phone won't boot, and you have no download mode or recovery, the phone's Donald. There's no pixie dust that's going to magically fix it.
Service centre & hope they either don't notice or don't care you've been messing with the phone so they fix it under warranty (and they're quite entitled to charge you for it given you borked the phone), or it may be JTAG'able which will probably be cheaper than Samsung/authorised repairer fixing it if they do decide to charge you for the repair.
Maybe you didnt check your battery level when flashing and it sucked all your juice... try charging your phone
Edit: Where the hell does it say to use odin to flash RR Rom...
Sent from my tomato using xda premium
How the hell did you flash RR Rom using ODIN?? Didnt you read the instructions
First hello guys..its just my 2nd post here anyways . i have a huge problem that i fully bricked my galaxy s3
My problem is that am stucked at samsung logo black screen and i can't do anything more ( can't enter downlload mode ...can recognize my phone on pc so i can use odin or fully reset it or something)
My bigger problem is that i lose my warrenty because my phone is rooted and flashed
Note: this problem happens while i was trying to flash cm10 and i did something wrong on rom manager thats why that all happens
Srry for my bad english and big talk and thx in advance
donsemaryy said:
First hello guys..its just my 2nd post here anyways . i have a huge problem that i fully bricked my galaxy s3
My problem is that am stucked at samsung logo black screen and i can't do anything more ( can't enter downlload mode ...can recognize my phone on pc so i can use odin or fully reset it or something)
My bigger problem is that i lose my warrenty because my phone is rooted and flashed
Note: this problem happens while i was trying to flash cm10 and i did something wrong on rom manager thats why that all happens
Srry for my bad english and big talk and thx in advance
Click to expand...
Click to collapse
perhaps a USB Jig may be of use to you in this situation to get you to download mode (Check my sig if you need a USB jig)
once you go to download mode, you can get to flash a stock firmware from odin
cheers!
By bricked doesn't that mean it's better off at a repair shop?
Since you can flash through odin. Tried flashing stock fitmwares? there's a site where you can download them.. Google.
Bricked ??? the OP may just be saying fully bricked without knowing .
Service job is paid for no warranty .
OP does not mention recovery mode .
jje
just try to go to samsung center and they will give their warranty. because they can get into download mode too so they can check your binary count dude
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
skycasaway said:
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
Click to expand...
Click to collapse
Seems like a sudden death issue.take it to the service center.they'll replace the board.
Sent from my GT-I9300 using xda premium
Its either SDS or user bricked .
Service centre is your only option left .
jje
yes it's SDS
JJEgan said:
Its either SDS or user bricked .
Service centre is your only option left .
jje
Click to expand...
Click to collapse
Thank's mate, i think it's SDS! Do you know any fix to this problem!? please help me:crying::crying:
skycasaway said:
Thank's mate, i think it's SDS! Do you know any fix to this problem!? please help me:crying::crying:
Click to expand...
Click to collapse
as said before: service centre
skycasaway said:
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
Click to expand...
Click to collapse
The thing is you flashed a version not meant for your GT I9300. You flashed the Verizon bootchain. Verizon GSIII is Samsung SCH-i535.
Different hardware than a i9300 (Qualcomm Snapdragon MSM8260A Dual core CPU, and the i9300 has a Samsung Exynos 4412 Quadcore). Sorry bro. If you still have download mode, you can try flash a i9300 bootloader. If not. you're dead.