Hi, I bought a XT910 in Marseille and the phone came with a FR Retail sock rom.
I'm in Brazil right now, and for some reason European roms mess with my APN settings, If i set the MNC to "02", like my Brazilian carrier (TIM) recommends, the APN just vanishes and does not work. And according to the carrier, that's why I'm not receiving SMS messages.
I tried flashing a (LATAM) BR Retail, and a BR TIM stock ICS rom with RSD Lite 5.7, but it always fails on step 6/18.
I tried with a (EMEA) UK Retail, just to check if the problem was with RSD, and it worked.
My question is: Can I flash a LATAM stock rom into this European phone?
Thanks, and I hope I was clear, I'm a complete noob since this is my first Android.
Doc.
I'm still stuck here, any help is appreciated.
Related
Hi,
so I've just picked up my Galaxy S Vibrant, imported from the US. Since I am a Norwegian I would very much like to flash to the European firmware with Norwegian language support. However, samfirmware.com site says that one "should ask in the forums" if ones phone is from the US.
So, is it safe for me to follow the regular guides and flash the phone to EU fw? Also, not sure if it's related, when I try to check my fw version (*#1234#) I get the message "Unable to process request"?
Thanks in advance.
Fisrt of all, i installed a non branded version of the FW R2BA026 and i get it from the decrypted roms in this forum, all h e other FW that i installed have the option for automatic APN configuration, exept for the R2BA026 for X10a, is there a possibility to get this FW from another, older, or from some FW of US???
Thanks...
You could just enter the APN info manually no?
Sent from my X10a using Tapatalk
i've done that, but when it does automatically, had a lot more data in the configuration.... beside if is a non branded firmware, shouldn't it come with auto config, for operators? and i'm in Chile (Latino America) but i cant get any fw to just update through SEUS and get the 026 for x10a... that's why i'm asking...
As far as I know, unbranded phones do not come with all the preconfigured APIs (there would be a crapload of them). The branded ones do.
SMS, MMS and 3G work after manual input of the API settings? If yes then why worry?
Kuronow said:
i've done that, but when it does automatically, had a lot more data in the configuration.... beside if is a non branded firmware, shouldn't it come with auto config, for operators? and i'm in Chile (Latino America) but i cant get any fw to just update through SEUS and get the 026 for x10a... that's why i'm asking...
Click to expand...
Click to collapse
I really don't understand your concern? If you manually set up your APN and it works fine then why do you care? Furthermore I wouldn't expect generic UK software to have automatic APN configurations for every operator in Chile. Most people face this same "issue" from other countries too, like here in Canada, it's easily resolved and I think this thread is unnecessary and misleading, esp in the Android Dev. :S
well, all the non branded firmware beside 026 have the auto config option enabled... and i'm not installing the uk generic, it suppose to be one 026 generic for x10i , and another for x10a, when you install any of the other generic(non branded) firmware u can use the auto settings for APN, but in the x10a R2BA026 its disabled this option, doesn't make you think maybe it's a branded version?, that's why i care.....
And beside, the auto config APN get all the config from the carrier, it doesn't come in the firmware. (correct me if i'm wrong)
Kuronow said:
Fisrt of all, i installed a non branded version of the FW R2BA026 and i get it from the decrypted roms in this forum, all h e other FW that i installed have the option for automatic APN configuration, exept for the R2BA026 for X10a, is there a possibility to get this FW from another, older, or from some FW of US???
Thanks...
Click to expand...
Click to collapse
i have the factory firmware backed up for AT&T USA i believe its R2BA016.
let me know.
Wait a minute, there's such a thing as a "non branded version of the FW R2BA026"????????
I thought 26 was only available for the x10i?
How do I get it for x10a?
Hi,
i have Fido Motorola Razr Droid.
i have installed root and Clockwork on it and works fine,
how can i dientify which fastboot file i have to flash to unlock my bootloader? where is the fast boot version marked? under about?
my plan is to get the retail EU version then upgrade to the european ICS.
can anyone advise what is the procedure to take change my phone firmware from Fido to the Retail EN version then upgrade to ICS?
Thanks
1. there is no unlocked bootloaders for the razr... so you cant flash anything to get it -_-
2. i believe w.e u do the EU version doesnt flash on any of the canadian razr because of the signature checks... for now we wait until a custom arctic comes out
i was impatient and flashed the brazilian retail fasboot flash from the ethernity project , it flashed , when i tried to flash the europe retail it did not,
why brazil it accept while not european one?
So as you are telling me there is no way for u s Canadian to get the Retail european version?
the Brazilian retial Flash Worked on Fido Razr Xt910.
Thanks.
according to what ive tried ya... euro doesnt seem to work... the only one we can use is the brazilian... i just installed Arctic rom over that which helps make the phone a lot more stabler
Here is my Experience,
i installed Asia Rom on my Fido and it worked fine and for my languages and in the about screen it has all Asian Rom Stuff,
the way i did it via Clockwork recovery,
someone on the net put the asian Backup recovery ,
i download it and boot it in CWM and Voila i got it working, without using RSD, now if i brick it i know that i have to use RSD Lite and restore brazilian then do whatever i want.
Hi, I've combed through the internet and this forum but it seems the stock Rogers, Middle East retail and Asia retail are yet to be leaked! Someone please tell me im wrong and provide download links for the 3 mentioned!?
Also, I reside in Pakistan and am using an imported (unlocked) rogers xt910. From what I've learned, only the Brazilian retail rom is compatible with my rogers razr. Is there any way for me to successfully and safely flash any other rom on my rogers razr? Has anyone successfully managed to do so yet?
Any suggestion/advice would be greatly appreciated!
I don't think its been leaked yet but you can follow these steps to return to asia rom:
http://forum.xda-developers.com/showthread.php?t=1441471
Hi Everyone,
I am facing really weird issue with my Motorola Defy+ having Android 2.3.6
I had Android 2.3.4 installed on my defy+ which came with factory packing. Last week I was playing around with my cell with romtoolbox pro and broke something and found the "infamous" error which made me stuck on bootlogo. So I had to flash. So I flashed it (using RSD lite) with sbf DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTGB005.0R_PDS03C_USAJRDNGIBRRTGB_P023_A025_M002_Service1FF.sbf
It worked like a charm. Now only but major problem I'm facing is that I'm just not able to get a signal for my sim which is Vodafone India. When I insert other sim like Airtel, it works pretty well. After going through so many threads, posts, comments, hints, I just couldn't fix this issue. So can anyone of you please get this n00b out of this problem?
I'm really frustrated at the moment
I wanna use Baseband switcher, but I can't cause it's not possible to use without root!! And as we know Android 2.3.6 defy+ is "Unrootable".
I also tried to switch back to 2.3.4 but it was all in vain.
No success!! Just no success!!
I tried other sbf files such as DFP-1321, DFP-139, DFP-2311, DFP-2312, etc etc.
If it is Android 2.3.6 then I don't find any signal for my Vodafone India ****.
If it is Android 2.3.4 then I'm just not able to flash it. All I get it is black screen.
I apologize, if my post it too long. I hope I made my problem and myself clear in it. Please help me!
Edit: Mods, please modify the thread title as I failed to add [Q] in it at the beginning.
BUMP!!!!
Nobody? :S
Edit: Fixed!!!!!
Installed SBF for Asia region and it's up and running.
No signals in vodafone sim
mahi_j87 said:
BUMP!!!!
Nobody? :S
Edit: Fixed!!!!!
Installed SBF for Asia region and it's up and running.
Click to expand...
Click to collapse
Hey, I'm having same issue with my vodafone sim. Its I've tried bbsV4.0mlV0.7 but no luck
Can you please send me a link for SBF for Aisa region? :angel: