Fisrt of all, i installed a non branded version of the FW R2BA026 and i get it from the decrypted roms in this forum, all h e other FW that i installed have the option for automatic APN configuration, exept for the R2BA026 for X10a, is there a possibility to get this FW from another, older, or from some FW of US???
Thanks...
You could just enter the APN info manually no?
Sent from my X10a using Tapatalk
i've done that, but when it does automatically, had a lot more data in the configuration.... beside if is a non branded firmware, shouldn't it come with auto config, for operators? and i'm in Chile (Latino America) but i cant get any fw to just update through SEUS and get the 026 for x10a... that's why i'm asking...
As far as I know, unbranded phones do not come with all the preconfigured APIs (there would be a crapload of them). The branded ones do.
SMS, MMS and 3G work after manual input of the API settings? If yes then why worry?
Kuronow said:
i've done that, but when it does automatically, had a lot more data in the configuration.... beside if is a non branded firmware, shouldn't it come with auto config, for operators? and i'm in Chile (Latino America) but i cant get any fw to just update through SEUS and get the 026 for x10a... that's why i'm asking...
Click to expand...
Click to collapse
I really don't understand your concern? If you manually set up your APN and it works fine then why do you care? Furthermore I wouldn't expect generic UK software to have automatic APN configurations for every operator in Chile. Most people face this same "issue" from other countries too, like here in Canada, it's easily resolved and I think this thread is unnecessary and misleading, esp in the Android Dev. :S
well, all the non branded firmware beside 026 have the auto config option enabled... and i'm not installing the uk generic, it suppose to be one 026 generic for x10i , and another for x10a, when you install any of the other generic(non branded) firmware u can use the auto settings for APN, but in the x10a R2BA026 its disabled this option, doesn't make you think maybe it's a branded version?, that's why i care.....
And beside, the auto config APN get all the config from the carrier, it doesn't come in the firmware. (correct me if i'm wrong)
Kuronow said:
Fisrt of all, i installed a non branded version of the FW R2BA026 and i get it from the decrypted roms in this forum, all h e other FW that i installed have the option for automatic APN configuration, exept for the R2BA026 for X10a, is there a possibility to get this FW from another, older, or from some FW of US???
Thanks...
Click to expand...
Click to collapse
i have the factory firmware backed up for AT&T USA i believe its R2BA016.
let me know.
Wait a minute, there's such a thing as a "non branded version of the FW R2BA026"????????
I thought 26 was only available for the x10i?
How do I get it for x10a?
Related
X10a
Canada Generic R1FA014
http://www.megaupload.com/?d=XK3EKTQ0
Brazil R1FB001 (BRAND UNKNOWN)
http://www.4shared.com/get/280380721/df6ceedd/X10a_Customized_BR_Released_12.html
X10i
Hong Kong Generic (VERSION UNKNOWN)
http://www.megaupload.com/?d=AAS0XUTZ
United Kingdom Generic R1FA016
http://andydodd.co.uk/Xperia/SimFreeUK.zip
United Kingdom Vodafone R1FA014
http://andydodd.co.uk/Xperia/VodafoneUK.zip
German Generic R1FA016
http://rapidshare.com/files/381330027/blob_fs.rar
German Generic R1FA014
http://rapidshare.com/files/37650474...GENERIC_EU.rar
German O2 R1FA014
http://rapidshare.com/files/38419824..._1.0.14_o2.rar
Anyone identity the hk&br firmware version for us?
German generic 1.0.16 http://rapidshare.com/files/381330027/blob_fs.rar
German generic 1.0.14 http://rapidshare.com/files/376504741/SE_X10_R1FA014_GENERIC_EU.rar
German O2 Brand http://rapidshare.com/files/384198245/x10_firmware_1.0.14_o2.rar
German O2 Brand R2BA020 http://rapidshare.com/files/402413803/blob_fs.rar (Works on all Phones, but u must get the APN Settings for ur Serviceprovider)
German Vodafone 1.0.14 http://rapidshare.com/files/399312482/original_Vodafone_1.0.14.rar
Can I install any firmware on my X10?
At the moment I have a german X10 with Baseband 1.0.14.
Can I upgrade to 1.0.16 without any problems?
Yes, when you have an branded Version, u must use the instructions to debrand it. But u can upgrade without any Problems. When Your phone is unbranded use the Sony Ericsson Update service, it will find the update. Save your old frimware when u decide to debrand it, so u can brand it back for warranty reasons.
Sounds great.
You have to know, that this is my first Android device. Before, I jsut used webOS and WinMo.
What tools do I need do 1. drebrand, 2. save the old firmware and 3. put the new firmware on the device?
I'm using a Mac, but can use Windows if needed.
Thanks for answer
any tutorial "how to flash it?"
and which firmware should i use it?cause i live in Indonesia...
Anyone identity the firmware version for us?
anyone 2.0 been relased?
United Kingdom Generic (VERSION UNKNOWN)
http://rapidshare.com/files/375895233/SE_x10.rar
is R1FA16 firmware
does anyone have older R1FA007 firmware?
Brazil version 1.0.21
have anyone try it?
4shared
get/280380721/df6ceedd/X10a_Customized_BR_Released_12.html
jerpelea said:
United Kingdom Generic (VERSION UNKNOWN)
http://rapidshare.com/files/375895233/SE_x10.rar
is R1FA16 firmware
does anyone have older R1FA007 firmware?
Click to expand...
Click to collapse
Thats R1FA16 for a X10i and its UK Simfree.
C987 said:
Thats R1FA16 for a X10i and its UK Simfree.
Click to expand...
Click to collapse
that is what i wrote
i need an older 007
This might be a stupid question but I'm running R1FA016 (was originally running R1FA014, Vodafone UK but flashed the phone) however when I go into the service menu it states that it's customized. I was under the impression that R1FA016 is unbranded.
To get into the service menu press menu, back, back, menu, back, menu, menu, back when the phone is locked.
I'm getting my info from the first option 'Model Info'.
Any ideas or am I being stupid?
I have R1FA016 version x10, bought it from o2 in uk, its not sim locked and it doesnt apear to be branded either, but it says customized too
jojosplace said:
This might be a stupid question but I'm running R1FA016 (was originally running R1FA014, Vodafone UK but flashed the phone) however when I go into the service menu it states that it's customized. I was under the impression that R1FA016 is unbranded.
To get into the service menu press menu, back, back, menu, back, menu, menu, back when the phone is locked.
I'm getting my info from the first option 'Model Info'.
Any ideas or am I being stupid?
Click to expand...
Click to collapse
same question for me ? Customised for UK maybe ?
Using R1FB001 (Brazil) on my Rogers X10a .. no problems so far.. Marketplace seems to be fine.. i can still install the app Rogers My Account from Marketplace
I have R1FA014 on tmobile Uk, am i far behind?
Oficially just one update behind, but considering the amount of total updates, yes you're far behind
Using R1FB001 (Brazil) on my Rogers X10a .. no problems so far.. Marketplace seems to be fine.. i can still install the app Rogers My Account from Marketplace
Click to expand...
Click to collapse
same here everything fine with brazil firmware on rogers
Sent from my X10a using the XDA mobile application powered by Tapatalk
daeshawn said:
same here everything fine with brazil firmware on rogers
Sent from my X10a using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
Running Brazil firmware on X10i, Tmobile US. Everything is peachy... testing now.
Hi!
I bought an X10 Mini about a month ago (Unlocked Latin American) and I've falshed it 2 times through SEUS, I was checking the back of my phone and it says SI 1237-3271 (from what I've gathered this is the General Latin American CDF), however I opened my default-capability.xml not only does it say that my model is and E10i (and it can't be since it's Latin American and I have a 3G connection in Colombia) but it also says that the phone's CDF is 1238-5790.
Does anyone know if this might be a problem when I try to update to 2.1 or any other kind of problem at all?
Thanx
if you are on your oficial firmware or the firmware what you wabt to stay... try doing a repair with PC companion, i downgrade from 2.1 nordic or whatever to the 1.6 nordic or whatever.... then i change my build.prop to the orginal one from my claro carrier, then do a repair, so i was on the original firmware claro again but Not 3G/UTSM band support, i repair it again and the problems gone
If your build prop refers to 1238-5790 it should be good for updates to 2.1. That is a E10a code.
Thanks for your answers, I realized that both CDFs are correct, the problem is that no update has been release for any E10a that I know of.
Hi everyone, i need some advise.
I had the global 2.1 rom on my rogers phone and it was beautiful, fast and flawless.
It did bother me i had an x10i rom on my phone, so i decided to change the codes to brazil and do the reinstall from seus to get 2.1 from brazil on my rogers phone.
This is where it went all bad, the update failed 3 times and on the forth it went through.
1. My x10 now has a few issue's, terrible signal strength, no bars in my basement. with the global rom i was getting 2 to 3 bars.
2. My wifi connects once and after the phone sleeps i need to restart the phone to get it to connect.
3. The app men u is slow, it opens fast but it takes about 7 to 8 swipes before it moves, then it sticks to where it scrolls to and again 7 to 8 swipes to get it to scroll. with the global rom the app menu was super fats no hesitation. i could go from the first app to the last very fast.
4. generally seems slower.
Here is the advice i would like to get.
1.should i reinstall the brazil rom?
2. should i go to rogers rom?
3. should i go to the global rom again?
One last thing, has anyone else had an issue with the brazilian rom?
Thanks for any tips/ advise.
i did the same with mine did not like having the 10i im not having any of your problems but I would also like to get rogers 2.1 on my phone also. but no issues with the brazil one so far.
Brazil Rom works like a charm on my x10a, I tried the nordic and the global roms but the Brazil Rom is the smoothest. Plus the app launcher doesn't lag.
I would suggest to flash the phone again through SEUS then do a factory reset for the phone and ur SD card
Sent from my X10a using XDA App
thanks guy's.
I'm glad to here it is not the brazil rom. i will reset and do the reinstall using seus and post back if i have any issue's.
Gota love the xda forums, everyone is so good at sharing experinces. makes it one of my favorite places to hang out and read.
im about to do this to my x10a as well, is this the correct code?
X10a CUST-BR NAM1 1234-4836 1232-4526 Customized BR/Sensuous black
Yes, that code is the right one for brazilian 2.1 generic fw.
Ok all is good now, seems that when the seus update failed it caused some issue's.
or doing the reset of the phone and sd card might have saved me.
Anyways all is good again.
Thanks
luimed said:
Yes, that code is the right one for brazilian 2.1 generic fw.
Click to expand...
Click to collapse
its worked thanks
Sent from my X10a using XDA App
According to Sony Ericsson Product Blog page LAM firmware has been released isnt the one with code 1232-4388?
Not sure if this is a good thread for this but I couldn't really find a response. I got a White X10 from Rogers a while back. I already debranded it using Generic Latin America (I think Argentina?? it was something like xploid, I can't remember exactly). Now I want to change the region so I can update to 2.1 but I'm not exactly sure how. Someone told me to I should change it to Brazil but I didnt know how to do that using the SEUS? I have an X10a with R2BA026. When I do the lock screen code (menu, back back etc...) under Country it says Generic LAM (b) - Brand is Customized. Under software info it has Phone Software Version: 1227 - 4612_R2BA026 Generic. Not sure if all of this was helpful but I hope someone can help me I really dont know when or how I'll be able to update to 2.1 without changing the region
Not able to bring phone back to original using SEUS
I tried upgrading to 2.3 but had no SD, so tried bringing it back to 2.1 Brazil 1232-4526 edited the custom files and what not but SEUS downloads the something than says my phone is already up to date. I'm using US X10a generic 2.1 right now. any ideas? also tried using recovery image I made with xrecovery but phone boots to SE colored logo than restarts.
A lot of people including myself have the problem with 2.1 where we cant send text messages longer than a single text.
But it says here that vodafone have worked with SE to fix the issue and have released an updated 2.1 firmware.
Is this firmware available yet for flashing? if it is where can i download it?
It tells you in the link you posted. Update/Repair using PC Companion.
But i have a rooted and unbranded phone with the nordic firmware. If i was to try and update i'd imagine PCC would not detect a vodafone firmware and not update to it... or that would not matter if SE have fixed all firmwares and not just done a vodafone fix, does anyone know? would PCC even work correctly with a flashed phone?
Beanyness said:
But i have a rooted and unbranded phone with the nordic firmware. If i was to try and update i'd imagine PCC would not detect a vodafone firmware and not update to it... or that would not matter if SE have fixed all firmwares and not just done a vodafone fix, does anyone know? would PCC even work correctly with a flashed phone?
Click to expand...
Click to collapse
Sorry, from your OP it sounded like you were on vodaphone firmware already. The easiest way to flash it back to vodaphone is by the CDA change method as you are rooted.
see here:-
http://forum.xda-developers.com/showthread.php?t=824711
you will need to change the codes to 1234-4579
Although as you were having problems with it on nordic firmware it would say to me that its not a firmware issue, more likely a network one but i'm no expert.
also, probably worth you keeping an eye on this thread, and PM Jeff-SEAnswers ...
http://forum.xda-developers.com/showthread.php?t=828615
Thanks mate
I dont think it's a network issue because other people have the same problem on all kinds of networks and in different countries.
I have a vodafone SIM but i've always had a unlocked/unbranded phone... what would happen if i tried to use PCC to put the new firmware on my phone without flashing back to my phones original firmware? and are all UK firmwares the same or would this one with the fix be specifically for vodafone?
Beanyness said:
Thanks mate
I dont think it's a network issue because other people have the same problem on all kinds of networks and in different countries.
I have a vodafone SIM but i've always had a unlocked/unbranded phone... what would happen if i tried to use PCC to put the new firmware on my phone without flashing back to my phones original firmware? and are all UK firmwares the same or would this one with the fix be specifically for vodafone?
Click to expand...
Click to collapse
Using the above method I linked to would install the newest Vodafone firmware (ie. The 'fixed' one in your link). It doesn't matter what firmware you are currently on. No, all UK firmwares are different, some will come with provider settings preinstalled, specific apps or features enabled/disabled depending on network. If you don't want to go back to branded try flashing to generic UK 2.1 using flash tool, thats what i'm on and I never had any text problems.
Think i'll just try flashing to the firmware you use and see if that fixes it... could you link me to the UK firmware you used? Cheers again!
Beanyness said:
Think i'll just try flashing to the firmware you use and see if that fixes it... could you link me to the UK firmware you used? Cheers again!
Click to expand...
Click to collapse
X10i Generic UK - http://www.multiupload.com/TVLQVFW4OA
just put the files in the 'firmware' folder of flashtool then run it.
Just to clarify things.
Could people please indicate the country and carrier if they have been able to get the .24 update.
Please DON'T report if you are unable to get it.
Many thanks.
not sure but think just countries with nordic 2.1 or mainly x10i countries have it
haven't seen any x10a update
alankstiyo said:
not sure but think just countries with nordic 2.1 or mainly x10i countries have it
haven't seen any x10a update
Click to expand...
Click to collapse
X10a CDA 1234-4820 has been out for almost a week now
I got the update through SEUS, flashed to generic nordic. I am in the Philippines on Globe Telecom bought my phone open line though and not through a telco