Hi!
I bought an X10 Mini about a month ago (Unlocked Latin American) and I've falshed it 2 times through SEUS, I was checking the back of my phone and it says SI 1237-3271 (from what I've gathered this is the General Latin American CDF), however I opened my default-capability.xml not only does it say that my model is and E10i (and it can't be since it's Latin American and I have a 3G connection in Colombia) but it also says that the phone's CDF is 1238-5790.
Does anyone know if this might be a problem when I try to update to 2.1 or any other kind of problem at all?
Thanx
if you are on your oficial firmware or the firmware what you wabt to stay... try doing a repair with PC companion, i downgrade from 2.1 nordic or whatever to the 1.6 nordic or whatever.... then i change my build.prop to the orginal one from my claro carrier, then do a repair, so i was on the original firmware claro again but Not 3G/UTSM band support, i repair it again and the problems gone
If your build prop refers to 1238-5790 it should be good for updates to 2.1. That is a E10a code.
Thanks for your answers, I realized that both CDFs are correct, the problem is that no update has been release for any E10a that I know of.
Related
Fisrt of all, i installed a non branded version of the FW R2BA026 and i get it from the decrypted roms in this forum, all h e other FW that i installed have the option for automatic APN configuration, exept for the R2BA026 for X10a, is there a possibility to get this FW from another, older, or from some FW of US???
Thanks...
You could just enter the APN info manually no?
Sent from my X10a using Tapatalk
i've done that, but when it does automatically, had a lot more data in the configuration.... beside if is a non branded firmware, shouldn't it come with auto config, for operators? and i'm in Chile (Latino America) but i cant get any fw to just update through SEUS and get the 026 for x10a... that's why i'm asking...
As far as I know, unbranded phones do not come with all the preconfigured APIs (there would be a crapload of them). The branded ones do.
SMS, MMS and 3G work after manual input of the API settings? If yes then why worry?
Kuronow said:
i've done that, but when it does automatically, had a lot more data in the configuration.... beside if is a non branded firmware, shouldn't it come with auto config, for operators? and i'm in Chile (Latino America) but i cant get any fw to just update through SEUS and get the 026 for x10a... that's why i'm asking...
Click to expand...
Click to collapse
I really don't understand your concern? If you manually set up your APN and it works fine then why do you care? Furthermore I wouldn't expect generic UK software to have automatic APN configurations for every operator in Chile. Most people face this same "issue" from other countries too, like here in Canada, it's easily resolved and I think this thread is unnecessary and misleading, esp in the Android Dev. :S
well, all the non branded firmware beside 026 have the auto config option enabled... and i'm not installing the uk generic, it suppose to be one 026 generic for x10i , and another for x10a, when you install any of the other generic(non branded) firmware u can use the auto settings for APN, but in the x10a R2BA026 its disabled this option, doesn't make you think maybe it's a branded version?, that's why i care.....
And beside, the auto config APN get all the config from the carrier, it doesn't come in the firmware. (correct me if i'm wrong)
Kuronow said:
Fisrt of all, i installed a non branded version of the FW R2BA026 and i get it from the decrypted roms in this forum, all h e other FW that i installed have the option for automatic APN configuration, exept for the R2BA026 for X10a, is there a possibility to get this FW from another, older, or from some FW of US???
Thanks...
Click to expand...
Click to collapse
i have the factory firmware backed up for AT&T USA i believe its R2BA016.
let me know.
Wait a minute, there's such a thing as a "non branded version of the FW R2BA026"????????
I thought 26 was only available for the x10i?
How do I get it for x10a?
I have a rooted X10a with the 026 firmware.
This is the info on it:
Model: X10a
Country: Germany
Brand: Customized
if I want to update to 2.1 legitimately through Rogers, do I have to flash my phone back to the Original Firmware that came with Rogers, or will SEUS do it automatically.
Sorry if this has been asked before...
Thank you
if I want to update to 2.1 legitimately through Rogers, do I have to flash my phone back to the Original Firmware that came with Rogers, or will SEUS do it automatically.
Click to expand...
Click to collapse
in future, to flash phone to 2.1 by rogers you could try default.prop method, a then just use Repair in PC Companion
ya .. i need to too..
i have the rogers X10a , with the Nordic 1.6 FW.. please help me to go back...
hi,
i own a X10 mini pro.
I got i from e-bay with T-Mobile branding.
I thought that I could update to 2.1 and debrand at the same time.
My Idea was to first unbrand my Phone by changing the build.prop to the unbranded German and updating via SEUS.
Whenever the Update to 2.1 would be ready for germany I could then update to 2.1.
I got it as far as installing the UK generic build.prop and installing UK generic but, as I live in germany, i would be interested in the german Image. Just replacing the Number in the build.prop does not work.
Does anyone here have any x10 mini pro build.prop from germany?
Greetings
Hi, I just walked to my local hardware store and pulled the file from one the phones there.
In case someone is interested I will attach the file.
Hi I live in germany too. I have tested the debrand method to replace the build.prop with the original german one that you attach. I get everytime the same error from SEUS and PC Companion that I have already the latest firmware. So far so good. But Iam missing the installtion button which appears when I have the original T-Mobile build.prop...
Can you verify me that the debranding works with your phone and you build.prop?
Thanx in advance.
I was intrigued by CDA 1233-8200. After updating to World 2.1, I changed all CDA references in the BUILD.PROP to 1233-8200. SEUS said my phone was up-to-date and did not give option to repair.
I had just used it to repair the World 2.1 to make sure it was working.
PC Companion got all the way to download and then came back with “no update available”.
IF it is a valid CDA IT IS MAY NOT be a variant on World. Now my phone is at World 2.1 with CDA pointing to 1233-8200. The SI may not be released and when It is it may then point to World.
If any more info is available on this CDA, please post.
Tony_C said:
I was intrigued by CDA 1233-8200. After updating to World 2.1, I changed all CDA references in the BUILD.PROP to 1233-8200. SEUS said my phone was up-to-date and did not give option to repair.
I had just used it to repair the World 2.1 to make sure it was working.
PC Companion got all the way to download and then came back with “no update available”.
IF it is a valid CDA IT IS MAY NOT be a variant on World. Now my phone is at World 2.1 with CDA pointing to 1233-8200. The SI may not be released and when It is it may then point to World.
If any more info is available on this CDA, please post.
Click to expand...
Click to collapse
I had this CDA on my device.
In the settings, it stated X10a, Generic America, country was America.
I could not get an update and since have flashed X10a generic 2.1 which is a world generic.
I got exasperated waiting for SEUS to release the update. My guess is the X10 has only been released in the US with AT&T and the 1233-8200 CDA would be if they ever released a unlocked version here.
augie7107 said:
I had this CDA on my device.
In the settings, it stated X10a, Generic America, country was America.
I could not get an update and since have flashed X10a generic 2.1 which is a world generic.
I got exasperated waiting for SEUS to release the update. My guess is the X10 has only been released in the US with AT&T and the 1233-8200 CDA would be if they ever released a unlocked version here.
Click to expand...
Click to collapse
Thanks, would you mind sharing your SI?
It wouldn't matter.
I'm on a Rogers device that was unlocked when I bought back in April by the seller.
I got the 1233-8200 CDA after flashing world generic R2BA026 through Davinci.
My phone is a Nordic Generic phone. But I did install the Norwegian Generic rom to it, but becuase this is a Telenor branded one I want to go back to the Nordic one.
Tried changing the build.prop file to trick SEUS to download the Nordic firmware but it just throws me a error about my firmware being customized before it starts downloading the firmware.
Does anyone know how to trick SEUS or maybe know of any Nordic firmware (1257-6087) to download? Old or new doesn't madder..
Flashtool the Europe Generic one.
K900 said:
Flashtool the Europe Generic one.
Click to expand...
Click to collapse
I know I could do that. But I want to have the Nordic one just in case I need to send in my phone for service.
A couple of years ago when I used the SE X10 Mini I just changed the build.prop file to change firmware/branding.
Is this possible somehow with Xperia S?
After some testing it seams like the Nordic Generic (1257-6087) firmware does not exist..
I now have the Norway Generic (1257-8821) on my phone. When I tried changing build.prop and cust.prop to match 1257-6087 PCC would always turn off and check my phone before downloading any firmware. But when I change them to match the Swedish Generic (1257-6919) it downloads the firmware to blob_fs before checking the phone, it does complain and does not update the phone but since the files have been downloaded I can update it with flashtool.
My SI number is 1257-6087 but it does not seam to be any firmware with that customization number.. strange..