hello friends...
i try this all method http://forum.xda-developers.com/showthread.php?t=1743466
and als try http://unlimited.io/ wire trick
not work ... for me
i want to s-off . bcz i am going bore with official ics ..
plz help me
Are you on the stock rom, or did you flash a modified one? If you are still on the stock rom, unlock your bootloader via www.htcdev.com and then try the wire trick again. I had to do it a lot of times, but it eventually worked. Just keep trying and eventually you will succeed
thanks
posedatull said:
Are you on the stock rom, or did you flash a modified one? If you are still on the stock rom, unlock your bootloader via www.htcdev.com and then try the wire trick again. I had to do it a lot of times, but it eventually worked. Just keep trying and eventually you will succeed
Click to expand...
Click to collapse
thanks bro from last 3 days i try more then 20 time but not work ...
i always stuck on juopuntbear screen after that adb not work ...\i don't know what should i do
i try restart my pc and mobile both so many time but not work for me
it sucks .....
thsnks for reply
faizan950 said:
thanks bro from last 3 days i try more then 20 time but not work ...
i always stuck on juopuntbear screen after that adb not work ...\i don't know what should i do
i try restart my pc and mobile both so many time but not work for me
it sucks .....
thsnks for reply
Click to expand...
Click to collapse
Did you get s off or not? Tell me exactly what you have done so far. I can give you step by step instructions and guide you through the process.
MrJyrks said:
Did you get s off or not? Tell me exactly what you have done so far. I can give you step by step instructions and guide you through the process.
Click to expand...
Click to collapse
thanks bro ....
i try with control bear box
my mobile going junpuntbear after that my pc not dedect my htc .... adb fail always
my phone is unlocked recovery installed
i want s-off
i also attached one picture ... stuck there every time....
wait for you tips
thanks
First of all, you must be on stock rom. Every sense 3.6 based rom should work. Did you run ControlBear as administrator?
If you did, run murder.bat from the attached .rar as administrator, wait till it's done. Try again. Still not working? Extract all the files from the rar to a folder. Run controlbear from there (run as admin). Give me feedback if it worked!
Edit: I have to upload the file somewhere else, it's over 8 mb so cant upload here.
Here's the link: https://docs.google.com/file/d/0B-fWg2dqIcnRT0xSZUdnVFRHeVk/edit?usp=sharing
Also It's a good idea to disable antivirus. I always do it as a precaution so I don't screw up anything.
If you need to know, the bat file searces for processes that may be interfering with controlbear and kills them.
Also none of this is my work, so all the thanks go to unlimited team.
MrJyrks said:
First of all, you must be on stock rom. Every sense 3.6 based rom should work. Did you run ControlBear as administrator?
If you did, run murder.bat from the attached .rar as administrator, wait till it's done. Try again. Still not working? Extract all the files from the rar to a folder. Run controlbear from there (run as admin). Give me feedback if it worked!
Edit: I have to upload the file somewhere else, it's over 8 mb so cant upload here.
Here's the link: https://docs.google.com/file/d/0B-fWg2dqIcnRT0xSZUdnVFRHeVk/edit?usp=sharing
Also It's a good idea to disable antivirus. I always do it as a precaution so I don't screw up anything.
If you need to know, the bat file searces for processes that may be interfering with controlbear and kills them.
Also none of this is my work, so all the thanks go to unlimited team.
Click to expand...
Click to collapse
thank you very much ....
i just use samsumg galaxy s3 data cable and every think work fine and finlly i did s-off thanks for you reply ...
Hello, I tried this junpuntbear s-off tutorial, but I'm stuck on junpuntbear boot. My pc can't find my phone from adb and it just stays there.
I unlocked with htcdev my bootloader, 4ext recovery installed, rooted. "Still not found device" etc... Any suggestion? I installed all drivers, fastboot/adb works fine. I installed mwakious3Drom 16.0.150_BASE_FINAL_RELEASE rom on my phone, is this the problem?
mhnx said:
Hello, I tried this junpuntbear s-off tutorial, but I'm stuck on junpuntbear boot. My pc can't find my phone from adb and it just stays there.
I unlocked with htcdev my bootloader, 4ext recovery installed, rooted. "Still not found device" etc... Any suggestion? I installed all drivers, fastboot/adb works fine. I installed mwakious3Drom 16.0.150_BASE_FINAL_RELEASE rom on my phone, is this the problem?
Click to expand...
Click to collapse
You need to go stock ROM first and then try s-off
Sent from my Evo 3D GSM using xda premium
simran420 said:
You need to go stock ROM first and then try s-off
Sent from my Evo 3D GSM using xda premium
Click to expand...
Click to collapse
Thanks for your reply, how can I go to stock ICS? Which RUU I must pick to flash? I'm from Greece. (GSM Model)
If I keep a Nandroid, can I restore it after s-off with wiping the stock rom? Or I must start from the begining?
Well, in theory any sense 3.6 based roms should work. Not sure about mwakiousrom though. To go completely stock you must flash a ruu as far as im concerned. Just download the appropriate ics RUU. Link
Since you are s on, lock bootloader with"fastboot oem lock". Run RUU. It will take a long time to finish. After that you must unlock bootloader from htcdev. Flash recovery. And finally, do the wire trick. After wire trick flash hboot 1.49. Link. You need to format all partitions except sd card after hboot change.
You can get the correct Europe ICS RUU from here -> http://www.androidfiles.org/ruu/sec...00U_11.25.3504.06_M_release_262714_signed.exe
MrJyrks said:
Well, in theory any sense 3.6 based roms should work. Not sure about mwakiousrom though. To go completely stock you must flash a ruu as far as im concerned. Just download the appropriate ics RUU. Link
Since you are s on, lock bootloader with"fastboot oem lock". Run RUU. It will take a long time to finish. After that you must unlock bootloader from htcdev. Flash recovery. And finally, do the wire trick. After wire trick flash hboot 1.49. Link. You need to format all partitions except sd card after hboot change.
Click to expand...
Click to collapse
I will do it with revolutionary because I know how revolutionary works (old Desire Z user ) but I need to downgrade hboot. In theory can I get a nandroid and restore after all this? Or the rom should be unstable?
You can restore stuff from a nandroid using this app
It restores apps/data, wifi settings, sms etc. It will require you to have a rooted rom. So in theory after you have done the wire trick you can flash a rooted rom and restore important stuff with this app
---------- Post added at 05:58 PM ---------- Previous post was at 05:55 PM ----------
https://play.google.com/store/apps/details?id=com.rerware.android.MyBackup&hl=en
Another backup option
And just a reminder, wire trick sometimes corrupts sdcards. so save your backups before doing wire trick
Oh, your on hboot 1.49? Revolutionary tools needs 1.49 afaik. If so, get the gb RUU.
MrJyrks said:
Oh, your on hboot 1.49? Revolutionary tools needs 1.49 afaik. If so, get the gb RUU.
Click to expand...
Click to collapse
I'm downloading the GB RUU, I think...
Code:
RUU_Shooter_U_HTC_Europe_1.20.401.2_Radio_10.53.9020.00_10.13.9020.08_2M_release_203403_signed.exe
is that right?
and one last thing, I think my mobile is vodafone branded, CID VODAP102.
then you should flash a vodafone ruu. And what hboot do you have? you cant run a GB ruu on a phone with the ics bootloader(1.53)
EM|NEM said:
then you should flash a vodafone ruu. And what hboot do you have? you cant run a GB ruu on a phone with the ics bootloader(1.53)
Click to expand...
Click to collapse
I have 1.53.0007 hboot. how I can downgrade the hboot? any suggestion?
mhnx said:
I have 1.53.0007 hboot. how I can downgrade the hboot? any suggestion?
Click to expand...
Click to collapse
Gosh. Maybe there is a way, but i am not aware of it. It is certainly a lot more easier to do the wire trick.
MrJyrks said:
Gosh. Maybe there is a way, but i am not aware of it. It is certainly a lot more easier to do the wire trick.
Click to expand...
Click to collapse
Then I'm going to make the wire trick, just hoping the ics ruu will work to get stock back. How much fool am I?
EDIT: The
Code:
RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed
RUU doesn't work, It reads the software info, I press start and nothing happens to my phone.
Related
Hey folks..so I want to start flashing kernels and yes I know I probably should have gone s-off way sooner but I want to do it now. I've been rooting and romming my phones for a while but this whole s-off procedure continued to scare the crap out of me. But..I don't want to limit my choices when it comes to roms and kernels so I guess I'll do it anyway.
However, I am currently running RUU 4.03.605.2 with Vigor360 1.1 s modified kernel.
Can I still go s-off even though I am now running the global leak (or is it now impossible) and if so, can someone point me in the right direction?
Thank you kind gents n ladies!
I've heard of several people being successful on 4.03.605.2 with the 3.14.605.5 ControlBear version.
Only other advice I can offer is don't give up, try different wires if you're having trouble, and pay attention to the troubleshooting page if you decide you want back out and try again later. I've S-OFF'ed three Rezounds. The first took 3 days, the second 2 minutes, and the third 30 minutes.
dplane said:
Hey folks..so I want to start flashing kernels and yes I know I probably should have gone s-off way sooner but I want to do it now. I've been rooting and romming my phones for a while but this whole s-off procedure continued to scare the crap out of me. But..I don't want to limit my choices when it comes to roms and kernels so I guess I'll do it anyway.
However, I am currently running RUU 4.03.605.2 with Vigor360 1.1 s modified kernel.
Can I still go s-off even though I am now running the global leak (or is it now impossible) and if so, can someone point me in the right direction?
Thank you kind gents n ladies!
Click to expand...
Click to collapse
i did s-off with viper's rom and the .5. i was on global too, don't let it scare you or you will not get it. i couldn't get the timing for the life of me. first two hours was a hassle, then i had to get my other battery(thought i bricked my phone) then i relized that they had a metrnome with the correct timing and it worked the first time. but use a different memory card. all of these things can be found under the s-off instructions.:good:
its really easy man you can do it. i reccemend using speaker wire as its more pliable than a paperclip.. if you need help i can walk you thru it on gtalk. just pm me for me gtalk. otherwise. goodluck and yes the 3.14.605.5 ControlBear version is the correct one just lock your bootloader, run the full ruu agan( 4.03.605.2), flash amonRA, then flash this in recovery (https://docs.google.com/file/d/0B0ZJtM40GdJ0MEpGeG1ZWi0yNDA/edit) to gain root on stock global, download root checker from the app store to be sure you got root before you begin. then boot phone and check usb debugging, connect your phone to the comp(within the stock rom), start control bear.. make sure to back up EVERYTHING as it could all get wiped. (internal sd, external sd, and your nandroid if you so choose) i reccemend using a spare sd card if you have one.. ive only done my phone but it took me all of 2 trys.. i got weird errors a couple times (other than "error: still sober" got that once) if you do just run control bear again
Thanks for the responses and moral support folks!
Collin, I may have to hit you up for that assistance soon, I'd rather be safe then sorry so I might feel better if I have someone to "hold my hand"
May not get around to it til Sat afternoon or Sunday though.
famouscollin said:
its really easy man you can do it. i reccemend using speaker wire as its more pliable than a paperclip.. if you need help i can walk you thru it on gtalk. just pm me for me gtalk. otherwise. goodluck and yes the 3.14.605.5 ControlBear version is the correct one just lock your bootloader, run the full ruu agan( 4.03.605.2), flash amonRA, then flash this in recovery (https://docs.google.com/file/d/0B0ZJtM40GdJ0MEpGeG1ZWi0yNDA/edit) to gain root on stock global, download root checker from the app store to be sure you got root before you begin. then boot phone and check usb debugging, connect your phone to the comp(within the stock rom), start control bear.. make sure to back up EVERYTHING as it could all get wiped. (internal sd, external sd, and your nandroid if you so choose) i reccemend using a spare sd card if you have one.. ive only done my phone but it took me all of 2 trys.. i got weird errors a couple times (other than "error: still sober" got that once) if you do just run control bear again
Click to expand...
Click to collapse
I'm working with the same situation as the OP. You posted a link to a second recovery to flash after Amon Ra, I've tried that link and it forces me to request access. Which recovery is it and is there another link or are you able to give me access to that one?
Hey guys.
I am a complete newb with most this stuff.
I am not sure how I look at RUU I have. I will say that my phone was pretty much stock through the official ICS release.
Currently I have CM9 flashed as my rom.
Is there anyway I can S-OFF my phone?
Sax1031 said:
Hey guys.
I am a complete newb with most this stuff.
I am not sure how I look at RUU I have. I will say that my phone was pretty much stock through the official ICS release.
Currently I have CM9 flashed as my rom.
Is there anyway I can S-OFF my phone?
Click to expand...
Click to collapse
If you haven't already, I would say start by checking out unlimited.io They have all the basic details about how to achieve S-OFF. Without knowing more specifics about your setup it would be hard someone to give a more specific answer.
neowisdom1031 said:
If you haven't already, I would say start by checking out unlimited.io They have all the basic details about how to achieve S-OFF. Without knowing more specifics about your setup it would be hard someone to give a more specific answer.
Click to expand...
Click to collapse
Yea I have went there.
I have the program downloaded. I am on Gray's CM9 rom.
Followed all the instructions. When the program runs it goes like this:
Starting up....
Connecting to device....
Searching device.....
Found device......
Backing up.....
Permission denied.....
Transferring backups....
Secondary backup FAILED!!
Press ENTER to exit.
like I said my phone was stock till the official ICS update released. After that I unlocked the boot loader and just recently flashed my first rom, through Amon Ra.
If I could kindly ask you what info you need, and possibly how to access the info, to help me out. Do I need to flash a stock rom back?
---------- Post added at 08:27 PM ---------- Previous post was at 07:29 PM ----------
I hope to god my hboot was stock. As I am running a previous RUU.
Hopefully once I do this, I will be able to S-OFF.
Sax1031 said:
Yea I have went there.
I have the program downloaded. I am on Gray's CM9 rom.
Followed all the instructions. When the program runs it goes like this:
Starting up....
Connecting to device....
Searching device.....
Found device......
Backing up.....
Permission denied.....
Transferring backups....
Secondary backup FAILED!!
Press ENTER to exit.
like I said my phone was stock till the official ICS update released. After that I unlocked the boot loader and just recently flashed my first rom, through Amon Ra.
If I could kindly ask you what info you need, and possibly how to access the info, to help me out. Do I need to flash a stock rom back?
---------- Post added at 08:27 PM ---------- Previous post was at 07:29 PM ----------
I hope to god my hboot was stock. As I am running a previous RUU.
Hopefully once I do this, I will be able to S-OFF.
Click to expand...
Click to collapse
If you're able to flash back to stock that would be the best place to start for S-OFF
neowisdom1031 said:
If you're able to flash back to stock that would be the best place to start for S-OFF
Click to expand...
Click to collapse
I flashed back to the first ICS RUU.
I think I know why it said permission denied. Because I didn't have actual root access.
At the point of trying the wire trick.
Edit: Achieved S-OFF. Thanks so much guys. Going from 3 days ago of flashing my first rom. To having to relock the device, run the first ICS Ruu, then doing the wire trick. Hell of a learning curve on these things. Thanks everyone for all the help.
Just a quick update. I was able to achieve S-Off while using this specific RUU. It took a few time flashing the RUU and a rooted rom to finally get it but it is possible with this RUU.
neowisdom1031 said:
Just a quick update. I was able to achieve S-Off while using this specific RUU. It took a few time flashing the RUU and a rooted rom to finally get it but it is possible with this RUU.
Click to expand...
Click to collapse
Fwiw I also was able to go s-off using this ruu and flashing supersu from a temporary amon ra. Not as tough as it thought.
Sent from my ADR6425LVW using xda app-developers app
.
Did you put the Juopunutbear executable and files into the same folder
that Android fastboot, adb, and other files are located?
michaelbsheldon said:
Did you put the Juopunutbear executable and files into the same folder
that Android fastboot, adb, and other files are located?
Click to expand...
Click to collapse
It shouldn't matter. ControlBear has its own versions of everything it needs.
Sent from my HTC Rezound using Tapatalk 2
So this is what i've done and its failing with the error: "Secondary backup FAILED!!"
-I reset everything by using the RUU 4.03.605.2.
-I then set the debugging mode, unlocked the bootloader
-Put AmonRa3.15 as my recovery
-Flashed the CWM SuperSU.
-Confirmed root access by using TitaniumBackup.
-Started the ControlBearRelease_vigor_ICS_3.14.605.5 for the ICS leak process.
-Then I get the fun error Secondary backup FAILED!!.
I'm using the latest version of JuopunutBear 0.4. Help?
-------------update---------------
So I re-flashed the full RUU and went through all the steps and still same outcome. "Secondary backup Failed!". I read that only version .1 may work if this error occurs?
=-\
Izeltokatl said:
So this is what i've done and its failing with the error: "Secondary backup FAILED!!"
-I reset everything by using the RUU 4.03.605.2.
-I then set the debugging mode, unlocked the bootloader
-Put AmonRa3.15 as my recovery
-Flashed the CWM SuperSU.
-Confirmed root access by using TitaniumBackup.
-Started the ControlBearRelease_vigor_ICS_3.14.605.5 for the ICS leak process.
-Then I get the fun error Secondary backup FAILED!!.
I'm using the latest version of JuopunutBear 0.4. Help?
-------------update---------------
So I re-flashed the full RUU and went through all the steps and still same outcome. "Secondary backup Failed!". I read that only version .1 may work if this error occurs?
=-\
Click to expand...
Click to collapse
i s-offed with the global ruu and and this version of control bear https://docs.google.com/file/d/0B0ZJtM40GdJ0SmVBbm40anJpRTg/edit ia got a few wierd errors but just started it up again and all went well..also make sure you have htc sync uninstalled from your computer
famouscollin said:
i s-offed with the global ruu and and this version of control bear https://docs.google.com/file/d/0B0ZJtM40GdJ0SmVBbm40anJpRTg/edit ia got a few wierd errors but just started it up again and all went well..also make sure you have htc sync uninstalled from your computer
Click to expand...
Click to collapse
Ya that's the exact same version I have, not really sure what to do? I re-did everything back to RUU again to no avail.
Izeltokatl said:
Ya that's the exact same version I have, not really sure what to do? I re-did everything back to RUU again to no avail.
Click to expand...
Click to collapse
you can try backing up your sd cards and partition them before you start the control bear process, and your sure you have root access correct? via rootchecker, tatanium backup or somethin gand usb degugging checked? if your still having issues look for apophis' thread named "so you need assistance, WE ARE HERE TO HELP" post in that thread im sure he can help you walk thru it..
When I bought my rezound used it had a constant boot loop issue. That's why I got it fairly cheap. I immediayly ran the global ruu hoping it would boot. It still boot looped. I was able to unlock, flash recovery and install newts xxx. I have tried to boot other romsand they give me issues too. Is there any way I can s off in my current configuration because I am pretty confident another ruu from my sd card just won't boot. Has anyone had success being on a custom Rom w global firmware hboot 2.27?
So I just cant get my EVO 3D downgraded........I followed the thread which says I can do it with xvi32 but I am on mwakious ROM and I cant find those numbers no way what I do.
HBOOT 1.53.007 is really a pain
So I would ask If you guys could help me......no I am not a noob but I need directions how to solve it.
Any Help is appreciated. thanks
Are you s-off? If not, then that's your first step.
coal686 said:
Are you s-off? If not, then that's your first step.
Click to expand...
Click to collapse
No my phone is S-ON.
gesange said:
So I just cant get my EVO 3D downgraded........I followed the thread which says I can do it with xvi32 but I am on mwakious ROM and I cant find those numbers no way what I do.
HBOOT 1.53.007 is really a pain
So I would ask If you guys could help me......no I am not a noob but I need directions how to solve it.
Any Help is appreciated. thanks
Click to expand...
Click to collapse
I am assuming you are trying to gain s-off correct? If that's the case perhaps I can offer you a different solution. With this solution you won't have to downgrade your hboot. Here's a link to this guide. http://forum.xda-developers.com/showthread.php?t=1743466
Now before you attempt it you must have the prerequisites met:
Unlocked via HTC Dev method
On stock ROM
Have superuser root
A PC windows or Linux
Insulated wire (speaker wire, or a paperclip wrapped with electrical tape is good enough)
Make sure HTC sync and or iTunes are uninstalled so they won't interfere
You will follow method D on the guide for those who are on 1.53
Follow the directions step by step. Make sure you download the appropriate control bear based on what os, phone, and computer you are using.
Make sure you know what contact areas you need to touch. This is the wire trick BTW.
When you have everything set up run the exe file and when it prompts you. Touch both contacts at the same time.
It might take a few tries but it should work.
Jsparta26 said:
I am assuming you are trying to gain s-off correct? If that's the case perhaps I can offer you a different solution. With this solution you won't have to downgrade your hboot. Here's a link to this guide. http://forum.xda-developers.com/showthread.php?t=1743466
Now before you attempt it you must have the prerequisites met:
Unlocked via HTC Dev method
On stock ROM
Have superuser root
A PC windows or Linux
Insulated wire (speaker wire, or a paperclip wrapped with electrical tape is good enough)
Make sure HTC sync and or iTunes are uninstalled so they won't interfere
You will follow method D on the guide for those who are on 1.53
Follow the directions step by step. Make sure you download the appropriate control bear based on what os, phone, and computer you are using.
Make sure you know what contact areas you need to touch. This is the wire trick BTW.
When you have everything set up run the exe file and when it prompts you. Touch both contacts at the same time.
It might take a few tries but it should work.
Click to expand...
Click to collapse
Yes I am tryin to gain S-OFF on my EVO 3D.
Unlocked via HTC Dev method: unlocked
On stock ROM: I would need a RUU correct? I downloaded one but the image version was lower than mine ( mine image version: 3.28.401.1 )
Have superuser root: i have
A PC windows or Linux : windows 7
Insulated wire (speaker wire, or a paperclip wrapped with electrical tape is good enough): sorii my englisch aint that good a picture would help
Make sure HTC sync and or iTunes are uninstalled so they won't interfere: never had HTC sync or Itunes
No you don't need a ruu if your already on stock. Your all good to go. There should be a picture of where to touch the contacts and a video if I'm not mistaken in unlimited.io's page where you find the evo 3d.
Jsparta26 said:
No you don't need a ruu if your already on stock. Your all good to go. There should be a picture of where to touch the contacts and a video if I'm not mistaken in unlimited.io's page where you find the evo 3d.
Click to expand...
Click to collapse
No I am not on stock.......I am on mwakious ICS ROM thats the point.
Ahaaa ok will check it out and btw the link for controlbear is dead.....removed I mean :S
gesange said:
No I am not on stock.......I am on mwakious ICS ROM thats the point.
Ahaaa ok will check it out and btw the link for controlbear is dead.....removed I mean :S
Click to expand...
Click to collapse
OK grab that ruu you were talking about and let's find out if we can get another link. I'll try pm the devs behind juopunut bear and see if they can post a link.
Edit: my mistake, you were referring about media fire. That's OK we can get the file from their website (hopefully) brb
Jsparta26 said:
OK grab that ruu you were talking about and let's find out if we can get another link. I'll try pm the devs behind juopunut bear and see if they can post a link.
Click to expand...
Click to collapse
Okay I got it on the site unlimited.IO
So I got the image version but cant determine which of the RUUs on our site is the correct one....because a lower one wont do nothing
Ok I found the link. http://unlimited.io/jb_shooteru.htm hopefully this will be it.
Edit: OK you got the control bear file. Are you branded? If so which carrier, if not just use the European ruu.
Here's how to downgrade your hboot for gsm after you s-off successfully http://forum.xda-developers.com/showthread.php?p=32032629
(Don't ask me for help as I couldn't care if your phone explodes, eh!
Jsparta26 said:
Ok I found the link. http://unlimited.io/jb_shooteru.htm hopefully this will be it.
Edit: OK you got the control bear file. Are you branded? If so which carrier, if not just use the European ruu.
Click to expand...
Click to collapse
No I am not branded so I will grab just an RUU European version
gesange said:
No I am not branded so I will grab just an RUU European version
Click to expand...
Click to collapse
OK once you get the file. Remember to relock your boot loader first before flashing your ruu.
1. Power down you phone and put it in fast boot
2. Make sure USB debugging is enabled
3. Hook your phone up to your PC
4. Run cmd and type fastboot oem lock.
5. If the file is an exe you can run it on your PC after relocking.
6. If not place it on root of sdcard and rename it too PG86IMG in all caps
7. Boot into boot loader and let your phone pick up the update
8. Start and let the update finish
9. Unlock bootloader again
10. Flash recovery
11. Flash super user
Presto!! Now your ready to run wire trick. Good luck.
Jsparta26 said:
OK once you get the file. Remember to relock your boot loader first before flashing your ruu.
1. Power down you phone and put it in fast boot
2. Make sure USB debugging is enabled
3. Hook your phone up to your PC
4. Run cmd and type fastboot oem lock.
5. If the file is an exe you can run it on your PC after relocking.
6. If not place it on root of sdcard and rename it too PG86IMG in all caps
7. Boot into boot loader and let your phone pick up the update
8. Start and let the update finish
9. Unlock bootloader again
10. Flash recovery
11. Flash super user
Presto!! Now your ready to run wire trick. Good luck.
Click to expand...
Click to collapse
Okay this will take up to 1h cause my internet is slow and informate the others that I found this latest RUU Europe version because I see many folks are looking for it ) I posted in the wrong section but I think mods can move it to general...little mistake )
Okay I will get back when download is done and the whole process you described too )
gesange said:
Okay this will take up to 1h cause my internet is slow and informate the others that I found this latest RUU Europe version because I see many folks are looking for it ) I posted in the wrong section but I think mods can move it to general...little mistake )
Okay I will get back when download is done and the whole process you described too )
Click to expand...
Click to collapse
I will create a mirror on dev-host and add it to your thread when it's ready since that should be faster and not have the advertising and such that hotfile uses. I have a CDMA model myself but I know a lot of people have the European version of the GSM model.
Edit: NVM. There are already good mirrors here and here.
ramjet73
Jsparta26 thanks for all your afford I have done it after 20 failed attempts my EVO 3D is S-OFF )
So whats the next what I should do now?
EDIT: I tooked the downgrade to 1.49.0007 HBOOT and now I should unlock it again via HTC DEV correct?
gesange said:
Jsparta26 thanks for all your afford I have done it after 20 failed attempts my EVO 3D is S-OFF )
So whats the next what I should do now?
EDIT: I tooked the downgrade to 1.49.0007 HBOOT and now I should unlock it again via HTC DEV correct?
Click to expand...
Click to collapse
Nope. Its not necessary anymore. You've been set free kinda like the matrix lol. You can upgrade and downgrade your hboot with no hassles. Flash any gsm evo 3d rom you want. With the exception of cool sense you can be whatever hboot you want and on any sense or aosp ROM you want. Just remember to be on 1.49 to flash aosp roms.
Please don't forget to abuse my thank you button. I'm glad you got s-off. Happy flashing sir.
Edit: viper 3d is the only ROM I know that can be on any hboot. However I am not sure about the other ROMs. I'm CDMA so have no clue about gsm roms. I would make sure to know what hboots are compatible with whatever ROM your interested in before flashing. Sorry about yje confusion.
You should be ok to flash any rom in the gsm threads without any issues with hboot 1.49, I'm gsm with hboot 1.49, unlocked through revolutionary and s-off, I have yet to find a rom that will not boot ics 3.6,ics 4,ics 4.1, and jb
(Don't ask me for help as I couldn't care if your phone explodes, eh!
I flashed a kernel today (was an update avaible) and I did this for some time now withouth any problems. But now, a problem
I'm stuck on the HTC splash screen, I use smarthflash from 4xt recovery and that WAS working great but now it isn't anymore what can I do ?
to be clear:
I'm s-ON I'm using smartflash from 4xt and it worked always. What I did:
I downloaded the update, went to the recovery, flashed it and then I removed cache and dalvik, reboot. I waited for over 1 hour it was still on the HTC boot screen .
I remove the battery. Wiped the whole phone (all partitions) I restored a backup that I made a few weeks ago, still the same!
I tried reflashing a whole new rom. Same
Reflashing other kernels > SAME!
Fastboot the boot > SAME!
Now I'm at a lost.... what can I do other then trow it away? I'm on hboot 1.53.xxx should I s-off should that help? I check a lot of guids but all of them require you to be in the rom it self....
I found this one:
http://forum.xda-developers.com/showthread.php?p=28131331
But when I run:
controlbear.exe as administrator it doesn't find my phone but ADB does find it when doing adb devices.... (I guess this only works when you are in the rom it self)
Did you try flash boot.img via adb?
Or to run a ruu?
1.53 can cause problems, if you manage to s-off it, you should flash a 1.49 version,that should be the best one for gsm...
Have you tried running a stock ruu.exe? That would take you back to stock, which is needed for wire trick (s-off) anyways. Make sure to relock bootloader before running ruu.exe
Sent from my PG86100 using Tapatalk
Quantenhall said:
Did you try flash boot.img via adb?
Or to run a ruu?
1.53 can cause problems, if you manage to s-off it, you should flash a 1.49 version,that should be the best one for gsm...
Click to expand...
Click to collapse
HermanV0929 said:
Have you tried running a stock ruu.exe? That would take you back to stock, which is needed for wire trick (s-off) anyways. Make sure to relock bootloader before running ruu.exe
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Thanks for the help guys!
I didn't run any RUU just yet.... will try this tomorrow
Herman, thanks tomorrow I will run the RUU
I have downloaded:
Code:
RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed
I asume this is the correct one (I'm unbranded and I live in Europe)
Also I tried relocking the boot loader (fastboot eom lock) but it still says that I'm unlocked in the bootloader..... I did:
fastboot oem writecid HTC__001
Then I got an error that said that it failed with to many links (like wtf?) and running it again gave no errors, and after running the lock it said that the device is locked BUT it's still showing unlocked in the bootloader after a reboot
btw can reflashing the recovery help...?
Reflashing the recovery may help. I'd definitely give that a try first. It can't hurt.
Sent from my PG86100 using Tapatalk
HermanV0929 said:
Reflashing the recovery may help. I'd definitely give that a try first. It can't hurt.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Well that didn't work, unfortianly... now going to do this the hard way! will report
edit:
It's booted again! after doing the wire trick and with a little help of my great friend friend.evil, following his guide:
http://forum.xda-developers.com/showthread.php?t=1743466
I got it s-off, reinstalled everyting (include recovery) flashed hboot 1.49.007 and then redid everything. Now it's booted again
gkillerx said:
Well that didn't work, unfortianly... now going to do this the hard way! will report
edit:
It's booted again! after doing the wire trick and with a little help of my great friend friend.evil, following his guide:
http://forum.xda-developers.com/showthread.php?t=1743466
I got it s-off, reinstalled everyting (include recovery) flashed hboot 1.49.007 and then redid everything. Now it's booted again
Click to expand...
Click to collapse
Thats great, glad you got fixed Having s-off is so much nicer than just being unlocked
Sent from my PG86100 using Tapatalk
I bought Evo which was already upgraded to ICS (OTA I assume), and it was branded I think. I've unlocked it via HTCDev, flashed '4ext touch recovery' and then rooted. Then I flashed MIUI ICS ROM, and everything is OK for now.
I want to use BootManager to flash multiple ROMs. It requires s-off. I tried it already with s-on, because I've read that SmartFlash (from 4ext recovery) makes my phone like s-off, so ROM on SD card installed, but won't boot. I had many problems going back to my Phone ROM, I restored my backup, wiped many times, installed fresh ROM and still had a bootloop. Finally I got it working again by flashing boot.img via fastboot (glad I did nandroid backup before). I didn't try again with different ROM, because after 2 hours of trying to recover my base ROM I've had enough. So I'm pretty sure BootManager will work better if my phone will be s-off.
So my question is - what to do next? We have so many guides and different comments here, sometimes the same method works for one, and doesn't work for another one, and I'm really confused.
I assume I should follow the instructions here http://forum.xda-developers.com/showthread.php?t=1743466 but I don't understand few things:
friend.evil said:
flash an ICS ROM from recovery(Method B from 10 to 14)
open ICS ROM.zip and extract boot.img to a folder which contains adb, fastboot and AdbWinApi.dll
go to fastboot and type:
fastboot flash boot boot.img
fastboot reboot
Click to expand...
Click to collapse
Do I have to do this if I'm already have MIUI with root privileges? Do I still need that boot.img from MIUI, and put it together with fastboot.exe?
Or should I restore stock ICS? I'm pretty sure I did nandroid backup before flashing MIUI.
friend.evil said:
12_Notice when you s-off the phone the hboot is corrupted i advice after s-off to follow the methods In E_(from 1 to 4)
Click to expand...
Click to collapse
Do I need to fix hboot after s-off? What hboot version I have after doing steps 1 to 4 from section E? There's a big zip file (PG86IMG.zip), is it another ROM or what?
And most important question - if method D doesn't work, method F is recommended, but:
elias17 said:
Hboot s on will only flash roms that are based on ics 3.28xx and sense 4 roms using a special boot.img ! U can never flash GB roms until u go s off like i did its a tricky process but it works and now i can flash any rom in the gsm section
Click to expand...
Click to collapse
friend.evil said:
2_flash Leedroid GB ROM from recovery http://leedroid.ftp.rshost.eu/Shoote....zip(Don't forget to wipe data/factory reset and wipe cache + dalvik)
Click to expand...
Click to collapse
I don't get it - can I flash GB ROM or not if I have hboot 1.53.0007 s-on? Can I use method F if method D fail?
Sorry for my english, I'm from Poland.
Thanks in advance for any tip.
You're confusing yourself, What you need to do my friend is.
1. Download RUU, Run RUU
2. HTC Unlock bootloader again
3. Do the Juopunutbear Wiretrick to get s-off
4. Download the 1.04 ENG hboot (There is one of those for the GSM I think... not sure though)
5. Flash a badass Android 4.2.1 rom. They work.
There's much more detailed guides on what to do, BUT This is a summary of what you want.
Be sure to hit thanks [= I'm almost to 100
Which RUU should I search for? GB or ICS?
But isn't the 1+2 the same as restoring my ICS Stock ROM from backup?
I think hboot 1.49.0007 would be enough, I've read that BootManager works well with that version.
1. Yes you can just restore your stock ics backup BUT you will have to root it using the file provided in method B.
2. Yes the 1.49.0007 hboot is best for gsm
3. You can flash a GB rom with your hboot no problem. It just dont think it will boot. so technically you should be able to do the wire trick with a GB rom flashed(not booted into). You'll be in fastboot mode for the wiretrick. There are different files for GB and ICS when doing the wiretrick
Your best bet is to run an ICS RUU, unlock bootloader, root rom, do the wire trick, change hboot to 1.49.0007 and then flash any rom you want
Backup was made right after I made root, is it enough? I just don't want to go through the entire process from the beginning (unlocking, rooting etc).
mars28 said:
Backup was made right after I made root, is it enough? I just don't want to go through the entire process from the beginning (unlocking, rooting etc).
Click to expand...
Click to collapse
That should work But unlocking again is really easy
You should still have you unlock token in the same place,
You just plug up to the computer hop into fastboot usb and type
Fastboot flash unlocktoken Unlock_Code.bin
to unlock and then
fastboot flash recovery recovery.img
for a recovery,
Then move SU to your sd card and flash it in recovery.
Then your all ready for the wire trick, The more you do these things the more experience you get at them and the better you get with fastboot. I suggest you go through the process opposed to just restoring (First off it's much much safer) and you'll know the ropes if you (or anyone else) has this problem.
Maybe you're right. I'll try with RUU. But I see it's hard to find the correct one these days, some old links died. I have a file called "RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed" which I have downloaded right before I started unlocking my Evo, could it be the correct one?
I didn't know I can use old "unlock_code.bin", I saw that everytime I read the token from the device, it was different. So I assumed that I have to flash bin that match the token.
mars28 said:
Maybe you're right. I'll try with RUU. But I see it's hard to find the correct one these days, some old links died. I have a file called "RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed" which I have downloaded right before I started unlocking my Evo, could it be the correct one?
I didn't know I can use old "unlock_code.bin", I saw that everytime I read the token from the device, it was different. So I assumed that I have to flash bin that match the token.
Click to expand...
Click to collapse
The token and the unlock code are specific to the phone, And doesn't change until you get a new phone.
And that seems to be the right one, Do you live in Europe? lol Shooter u means GSM and ICS means it's the latest RUU.
mars28 said:
Maybe you're right. I'll try with RUU. But I see it's hard to find the correct one these days, some old links died. I have a file called "RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed" which I have downloaded right before I started unlocking my Evo, could it be the correct one?
I didn't know I can use old "unlock_code.bin", I saw that everytime I read the token from the device, it was different. So I assumed that I have to flash bin that match the token.
Click to expand...
Click to collapse
you can easily get a new token from htc dev web site
Sent from my HTC EVO 3D X515m using xda app-developers app
Can't_Live_Without_My_Evo said:
And that seems to be the right one, Do you live in Europe? lol Shooter u means GSM and ICS means it's the latest RUU.
Click to expand...
Click to collapse
I know I use shooter_u, I asked because I've found another RUU which have "Rogers_WWE" in name of the file, and the rest of the file name is identical, and I remember that I had to choose "rogers" when I was unlocking via htcdev. That's why I wasn't 100% sure if I had to choose "HTC_Europe" or "Rogers_WWE".
Another thing which confuses me:
http://forum.xda-developers.com/showthread.php?t=1495358
mpgrimm2 said:
Note 3: If you previously did the HTC Unlock, you'd have to "RELOCK" BEFORE running the RUU.
To do this from fastboot type: fastboot oem lock
Click to expand...
Click to collapse
Should I do this or start directly with RUU.exe? My phone is currently "UNLOCKED, hboot 1.53.0007, s-on".
And what about CID? I've read somewhere that I have to change to supercid or something, to be able to flash zips via fastboot. How to check my current CID?
Search for cid getter on play store to get your cid
You certainly need to relock you hboot before running RUU. For the correct ruu you should check the box that your phone came in. It should have the details (atleast i think so)
P.S. you probably don't need to change cid. Infact i'd recommend you not to do that just yet
Got the CID, it's HTC__032. I want to be prepared, who knows what might come up during the whole process.
friend.evil said:
12_Notice when you s-off the phone the hboot is corrupted i advice after s-off to follow the methods In E_(from 1 to 4)
Click to expand...
Click to collapse
What means "corrupted"? Phone won't boot or what?
Eeh, if I knew that hboot 1.53.x is so problematic, I would buy Evo with GB on-board.
mars28 said:
Got the CID, it's HTC__032. I want to be prepared, who knows what might come up during the whole process.
What means "corrupted"? Phone won't boot or what?
Eeh, if I knew that hboot 1.53.x is so problematic, I would buy Evo with GB on-board.
Click to expand...
Click to collapse
I think yours might be an european model. i had the exact same cid as yours.
when you get to that step of corrupted hboot just follow the steps on this thread and flash hboot 1.49.0007
http://forum.xda-developers.com/showthread.php?t=1906172
Cant kive without my evis comments about the wire trick are bang on. It will fix everything. Having s-off is just much easier so do the wire trick. It will work. My wife and I both have an evo. I had to do the wire trick twice on hers for it to work and four times on mine for it to work. Be patient if it fails the first few times. And if the screen gets stuck on the jounuo whatever screen you can fix that.
If you are stuck at Juopunutbear screen and if you can go to bootloader you need to connect the phone to pc, go to fastboot ( should say fastboot usb)*Go to controlbear folder (from where you ran controlbear to begin withon you pc then open command window in it (hold shift and right click, that willopen command window rigjt there and then*when you get into it you need to enter:
"ControlBear.exe -f" no quotes or "ControlBear f" notice the space after the exe !
Lots of peopke forget to put it in and say it didnt work.
I presume this will fix the problem
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
My phone is now s-off. I didn't flash RUU, just restored stock rooted ROM from backup, did the wire trick (just one time, surprisingly) and everything went nice and smooth. Then I flashed hboot 1.49.0007 with no problems at all. Thanks guys for the tips.
One more thing - my phone state is now "LOCKED" - should I bother?
So I got what I wanted - I've installed ROM in BootManager (the one which doesn't boot before, while phone was 's-on') and this time it booted from SD. Today I'll try more ROMs in BootManager.
Locked doesn't matter as long as you are s-off. It only creates problems if you ever plan on using fastboot commands. Trust me, you dont need to bother with it
But if you really want to know heres a quote from ramjet where he explains it a bit.
ramjet73 said:
Once the RUU.exe is run and the stock bootloader is installed, the phone will be bootloader S-ON regardless of the radio S-OFF status. To run fastboot commands like "flash" and "erase" the stock bootloader needs to be unlocked by the htcdev method or a custom bootloader modified to support those commands needs to be flashed, which requires radio S-OFF.
Click to expand...
Click to collapse
It seems like the questions about returning to 100% stock are coming up more often lately, possibly because more users are moving on to other devices. Whatever the reason, I thought a simple guide might be useful to avoid having to duplicate this info in other threads and PM's.
This procedure should work for any CDMA or GSM Evo 3D/V that is S-OFF. There is no way to get an S-ON device that has been HTC unlocked back to 100% stock since relocking the bootloader will result in a status of "relocked".
Here are the steps to do it:
1. Flash the "query_bootloader.zip" file attached to this post in recovery. If the status message shows your bootloader is "unlocked" or "relocked" flash the "lock_bootloader.zip" file from the same post to reset it to "locked".
2. Download an RUU.exe (Windows) or RUU.zip (bootloader) file for your model from this page and flash it using the appropriate method.
If you use the .exe version from Windows it works best if you put the phone into "fastboot USB" mode, and you may have to cancel the RUU utility and restart if it hangs after flashing the stock bootloader when you start with a custom hboot installed.
To flash the RUU.zip via the bootloader it must be renamed to PG86IMG.zip and placed in the root of your SD card, and may need to be flashed twice if a custom hboot is installed the first time it is flashed.
I recommend using the latest version for your model but any compatible RUU can be flashed while S-OFF. It's also a good idea to boot the ROM without doing any setup after flashing the RUU to make sure the ROM has been reset to the stock version.
3. Confirm that the bootloader shows "***LOCKED***" on the top line of the screen and the HBOOT version is a stock bootloader for your device.
4. Issue the "fastboot oem writesecureflag 3" command from a PC.
Note: Make 100% sure you have the stock bootloader installed before issuing this command or you will brick your phone.
Your phone will now be 100% stock.
ramjet73
Thanks for the nice toturial but i´m just wondering one thing.
If you fail with the command
Code:
fastboot oem writesecureflag 3
, will your phone get hardbricked or is it possible to flash a recovery and start over again with fastboot?
dR.BaNaNe said:
Thanks for the nice toturial but i´m just wondering one thing.
If you fail with the command
Code:
fastboot oem writesecureflag 3
, will your phone get hardbricked or is it possible to flash a recovery and start over again with fastboot?
Click to expand...
Click to collapse
If that command fails nothing will happen and your phone will stay S-OFF but the odds of that happening are very small unless your phone is not in "fastboot usb" mode when you issue it.
The risk involves issuing that command when you have a custom hboot like JBear or Revolutionary installed because those bootloaders are not signed and will cause the phone to brick. In that scenario you would not be able to get into recovery.
ramjet73
Ok thanks man.
Ok, in the RUU's I can download I have 2 problems:
1) How do I know which one to download? I see a few that have Sprint ICS. I have the Virgin Mobile phone Evo V 4g. Which one would I get?
2) I have already tried downloading a few of them, and each time it stops at a different point and windows says the zip file is not valid. Is there another place I can download the correct RUU?
I need to get this done soon as I have a replacement headed this way.
matt965 said:
Ok, in the RUU's I can download I have 2 problems:
1) How do I know which one to download? I see a few that have Sprint ICS. I have the Virgin Mobile phone Evo V 4g. Which one would I get?
Click to expand...
Click to collapse
This is the correct RUU for your phone.
2) I have already tried downloading a few of them, and each time it stops at a different point and windows says the zip file is not valid. Is there another place I can download the correct RUU?
Click to expand...
Click to collapse
If that link doesn't work for you the same RUU is available here, including an MD5 checksum you can use to verify the download.
I need to get this done soon as I have a replacement headed this way.
Click to expand...
Click to collapse
ramjet73 said:
1. Flash the "query_bootloader.zip" file attached to this post in recovery. If the status message shows your bootloader is "unlocked" or "relocked" flash the "lock_bootloader.zip" file from the same post to reset it to "locked".
Click to expand...
Click to collapse
how do i do this if i have no working recovery? iv been trying to ruu with RUU_Shooter_S_Sprint_WWE_2.08.651.3_Radio_0.97.10.0808_NV_SPCS_1.31_003_release_219445_signed.exe
iv tried many ruu's but only 2 have ever gone through. when it does i just get reboots on htc screen. recovery does not seem to work.
thanks for the help. hope i havnt bricked my phone
birddseedd said:
how do i do this if i have no working recovery? iv been trying to ruu with RUU_Shooter_S_Sprint_WWE_2.08.651.3_Radio_0.97.10.0808_NV_SPCS_1.31_003_release_219445_signed.exe
iv tried many ruu's but only 2 have ever gone through. when it does i just get reboots on htc screen. recovery does not seem to work.
thanks for the help. hope i havnt bricked my phone
Click to expand...
Click to collapse
This is the wrong thread for what you need to do and I posted a link to the correct guide in the thread you opened in the development forum that got moved to Q&A.
When you are ready to download the RUU look for the 2.89.651.2 version.
ramjet73
thank you ramjet for the link. my phone is now 99% stock. The 1% is because of the S-OFF part of the bootloader. It shows it is locked so that's good, but I think that means I can't turn S-ON, as it says in the first post. Oh well, hopefully they will accept it like that.
matt965 said:
thank you ramjet for the link. my phone is now 99% stock. The 1% is because of the S-OFF part of the bootloader. It shows it is locked so that's good, but I think that means I can't turn S-ON, as it says in the first post. Oh well, hopefully they will accept it like that.
Click to expand...
Click to collapse
if you figure out how to get jb roms to boot post back so we all can know how
birddseedd said:
if you figure out how to get jb roms to boot post back so we all can know how
Click to expand...
Click to collapse
JB roms don't boot with this phone??? Strange since mine booted just fine with them.
matt965 said:
JB roms don't boot with this phone??? Strange since mine booted just fine with them.
Click to expand...
Click to collapse
They do.
This is the wrong thread to discuss booting JB ROM's and I don't know why he posted that here.
ramjet73
Thanks for this thread, great to go back to 100% stock for warranty purposes...
But for sellers who's warranty has run out, the newest JB or ICS rom is the best
Which RUU do i use for a Sprint Evo 3?
I'd like to follow the instructions here; you pointed me to this OP in another reply when I asked how to go back to stock, but I don't know which one to use. I'm on hboot 1.50.5050 running CM 10.1 on a Sprint Evo 3D, using "Wild for the Night" and I want to go back to 100% stock, S-ON, unrooted, locked.
Is 'WWE' the US version? I know not to use RUUs for other countries but I can't tell which to use from the list.
(I used the jbear wire trick and have Ext4 installed if it makes any difference.)
occulus said:
I'd like to follow the instructions here; you pointed me to this OP in another reply when I asked how to go back to stock, but I don't know which one to use. I'm on hboot 1.50.5050 running CM 10.1 on a Sprint Evo 3D, using "Wild for the Night" and I want to go back to 100% stock, S-ON, unrooted, locked.
Click to expand...
Click to collapse
This is the RUU you want to use.
ramjet73
Does it work for EVO 3D GSM with Revolutionary?
Sorry for my english.
ramjet73 said:
This procedure should work for any CDMA or GSM Evo 3D/V that is S-OFF. There is no way to get an S-ON device that has been HTC unlocked back to 100% stock since relocking the bootloader will result in a status of "relocked".
Click to expand...
Click to collapse
t_mcpardi said:
Does it work for EVO 3D GSM with Revolutionary?
Sorry for my english.
Click to expand...
Click to collapse
Probably not, since ramjet said that in the OP.
t_mcpardi said:
Does it work for EVO 3D GSM with Revolutionary?
Sorry for my english.
Click to expand...
Click to collapse
raptoro07 said:
Probably not, since ramjet said that in the OP.
Click to expand...
Click to collapse
If he has Revolutionary and is S-OFF this guide should work as long as the RUU is available for the model of his phone. That's the only thing that is specific to the GSM or CDMA model.
ramjet73
Which ruu do I use I'm running hboot 1.50.5050 and bootloader is unlocked
rafylora1230 said:
Which ruu do I use I'm running hboot 1.50.5050 and bootloader is unlocked
Click to expand...
Click to collapse
The hboot doesn't matter, but if you are on Virgin Mobile you need this one.
ramjet73