Related
Hello, i have a question ¿how can i enter to recovery mode in wt19 and what i need to do it?, i try with power and menu, power and camara, power and vol down, power and vol up, power an vol down and vol up, power and vol down several times, even power and walkman, i could flash it with .62 and rooting it, but i want to know if there is a way to boot in recovery. THZ
I dont unlock bootloader, but a friend have a galaxy with bootloader locked and he can user recovery mode.
EDIT
Sorry i did install a custorm kernell and a custom rom, and i forget edit this post, Thank you very much and sorry for inconveniences.
Did u install cwm?what firmware u have?
Cus if u have cwm simply power ur phone and keep pressing vol down
Sent from my WT19i using XDA
lobo115 said:
Hello, i have a question ¿how can i enter to recovery mode in wt19 and what i need to do it?, i try with power and menu, power and camara, power and vol down, power and vol up, power an vol down and vol up, power and vol down several times, even power and walkman, i could flash it with .62 and rooting it, but i want to know if there is a way to boot in recovery. THZ
I dont unlock bootloader, but a friend have a galaxy with bootloader locked and he can user recovery mode.
Click to expand...
Click to collapse
wt19i does not have a built in recovery like the samsung phones.
you have to install it.
if you have root already, then proceed to this thread and follow instructions.
http://forum.xda-developers.com/showthread.php?t=1345741
browse the last few pages of that thread, i believe somebody has got it working.
lobo115 said:
Hello, i have a question ¿how can i enter to recovery mode in wt19 and what i need to do it?, i try with power and menu, power and camara, power and vol down, power and vol up, power an vol down and vol up, power and vol down several times, even power and walkman, i could flash it with .62 and rooting it, but i want to know if there is a way to boot in recovery. THZ
I dont unlock bootloader, but a friend have a galaxy with bootloader locked and he can user recovery mode.
Click to expand...
Click to collapse
Unless you're talking about CWM recovery (keep pressing repeatedly volume down when you see Sony logo, until you enter CWM), there's also a so called 'safe mode', check this thread.
Thankz
Thankz everybody,cwm works perfec to me, i Thought it have its own built recovery, thz
I'm looking for recovery lor my sony wt19i with official 4.0.4(4.1.B.0.587) android.
Phone is already rooted, I got Rom Manager, and I would like to install CM9.1
The only recovery I found was for 2.3 android only. Ao I did not try to install it.
Can you provide me a link or guide me what should I do?
Yes I am noob, but will be thankfull.
othar.pl said:
I'm looking for recovery lor my sony wt19i with official 4.0.4(4.1.B.0.587) android.
Phone is already rooted, I got Rom Manager, and I would like to install CM9.1
The only recovery I found was for 2.3 android only. Ao I did not try to install it.
Can you provide me a link or guide me what should I do?
Yes I am noob, but will be thankfull.
Click to expand...
Click to collapse
You can't install cyanogenmod before you have unlocked your bootloader. You can unlock by official sony method for developers (look in my signature for a guide) or by testpoint method. Otherwise you can't install a rom for unlocked bootloader because you aren't able to flash a kernel boot.img.
When your bootloader is unlocked, in most custom kernels cwm is integrated
Don't try to flash a rom for unlocked bootloader on a locked bootloader, otherwise your device will brick and you will have to flash the original firmware with flashtool!
Ah btw to install cwm on ics you must have rooted ics (you can't root ics like gingerbread firmware .42, you will have to do it like this) and then you can download the x-parts app from playstore which can automaticly install cwm
I rooted device and have X-Parts.
Installed Recovery 5.5.0.4 by pvyParts.
I am able to restart in recovery mode.
Do I understand it right?
Even if I have recovery installed I won't be able to install CM or other ROM with locked bootloader?
othar.pl said:
I rooted device and have X-Parts.
Installed Recovery 5.5.0.4 by pvyParts.
I am able to restart in recovery mode.
Do I understand it right?
Even if I have recovery installed I won't be able to install CM or other ROM with locked bootloader?
Click to expand...
Click to collapse
You can install roms especially made for locked bootloader, like ics based "real ics lite" or "MiniCMSandwich". There are some MIUI rom's around here, too, but stock rom is the smoothest
mihahn said:
stock rom is the smoothest
Click to expand...
Click to collapse
I just want to get rid of apps like facebook
And try something new ofcourse.
othar.pl said:
I just want to get rid of apps like facebook
And try something new ofcourse.
Click to expand...
Click to collapse
If your phone is rooted, you can uninstall crap like facebook on every rom. Just download an app like titanium backup or any other app and uninstall it
Help me fix bluetooth on sony ericsson wt19i use android 4.2.1 !......
Help me....
namebimat said:
Help me fix bluetooth on sony ericsson wt19i use android 4.2.1 !......
Help me....
Click to expand...
Click to collapse
We can't help you fixing this because we all have to wait that the fix comes from sources. Be patient or use Android 4.1.2
how to setup custom rom in lww
actually i hv done root and also installed rom into my device by using "SE_Extreme_Tweak_Installer" and bravia engine as well ....then i installed rom manager v 5.5.2.8 from google play NOW i dont know what to do ???
please guide me
thanks in advance
giri.sahu94 said:
actually i hv done root and also installed rom into my device by using "SE_Extreme_Tweak_Installer" and bravia engine as well ....then i installed rom manager v 5.5.2.8 from google play NOW i dont know what to do ???
please guide me
thanks in advance
Click to expand...
Click to collapse
go here http://forum.xda-developers.com/showthread.php?t=2148684
error while creating recovery
after installation cwm recovery as mentioned that we must take backup from pressing vol - key and selecting backup option...
as same thing i did but during backup process it shows " .android_secure " error .
and i am afraid of that because i don't have any back up file.
please help me how to fix this problem
thanks
giri.sahu94 said:
after installation cwm recovery as mentioned that we must take backup from pressing vol - key and selecting backup option...
as same thing i did but during backup process it shows " .android_secure " error .
and i am afraid of that because i don't have any back up file.
please help me how to fix this problem
thanks
Click to expand...
Click to collapse
These are the apps on your sdcard. Be sure you have ca 1,5 gb of free storage on your sdcard when you start the backup. The size depends on how many apps are installed/etc but 1,5 should be good to be on the safe side
Sent from my Nexus 4 running Android 4.2.2
sd-ext bot found
while taking backup it says "sd-ext not found and skipping backup" and jumped to another process then backup complete.
for confirmation i did restore ..then it says sd-ext .img not found.
and could anyone explain about sd-ext ?
giri.sahu94 said:
while taking backup it says "sd-ext not found and skipping backup" and jumped to another process then backup complete.
for confirmation i did restore ..then it says sd-ext .img not found.
and could anyone explain about sd-ext ?
Click to expand...
Click to collapse
It says sd-ext.img not found on every backup I take so there's no problem. For more information about sd-ext use the search
Sent from my Nexus 4 running Android 4.2.2
resting mobile got stuck on SONY logo
i tried to upgrade ICS ROM with [ROM][ICS][LWW]Walkman Xperia™ v2.5 [06.04.2013] which i found on http://forum.xda-developers.com/showthread.php?t=2196841
as their instructions
(
1.Backup you system
2.Reboot device and go to CWM or TWRP
3.Wipe data, cache, format system, data, cache, dalvik cache
4.Reboot and go to CWM or TWRP )
i did whole thing then after restarting mobile got stuck on SONY logo also i am trying to press vol down key for entering cwm recovery but nothing is happening .
please help i have only single fone
please
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Just flash the original rom with flashtool. Do it like here.
Have you been on rooted ics or rooted gingerbread? Cause I think you have to be on rooted ics to install real ics, but I don't know exactly
amphe said:
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Click to expand...
Click to collapse
Download Flashtool from HERE
DOWNLOAD official ICS firmware from HERE
Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
How to root 4.0.4 (4.1.B.0.431)
Go to settings > Security > Mark "Unknown sources"
Settings > Developer options > Mark USB debugging
Settings > Xperia > connectivity > USB connection mode > select MSC mode
1 ) Download Xperia ray kernel from HERE
2) Go to C:/ Drive > flashtool > firmwares > delete everything present and Put the kernel ( ST18i_4.1.A.0.562_kernel.ftf )
3) Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
Flashtool may show error after flashing kernel, no worries
4) After flashing restart your device, It will not start completely, remain at Sony logo or remain blank/black.
Whatever the status is, just restart your device and proceed with the rooting--->
( Make sure you close flashtool before running the rooting toolkit )
Now connect your mobile to PC and Root Your Phone
5) Download Xperia mini 4.0.4 Kernel and flash it
Your mobile is now rooted (See if any Superuser app has been installed on your phone ) and back to life
amphe said:
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Click to expand...
Click to collapse
the most easy way to flash custom rom is to unlock your bootloader first...then flash any custom kernel that have root and CWM pre-installed...then you can flash any custom rom without any problem....
THANK YOU
OMG! THANK YOU ALL for your time to read my post and reply me!
PROBLEM SOLVED! I M SO HAPPY!
THANK YOU! THANK YOU!
danutzgtx480 said:
Download Flashtool from HERE
DOWNLOAD official ICS firmware from HERE
Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
How to root 4.0.4 (4.1.B.0.431)
Go to settings > Security > Mark "Unknown sources"
Settings > Developer options > Mark USB debugging
Settings > Xperia > connectivity > USB connection mode > select MSC mode
1 ) Download Xperia ray kernel from HERE
2) Go to C:/ Drive > flashtool > firmwares > delete everything present and Put the kernel ( ST18i_4.1.A.0.562_kernel.ftf )
3) Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
Flashtool may show error after flashing kernel, no worries
4) After flashing restart your device, It will not start completely, remain at Sony logo or remain blank/black.
Whatever the status is, just restart your device and proceed with the rooting--->
( Make sure you close flashtool before running the rooting toolkit )
Now connect your mobile to PC and Root Your Phone
5) Download Xperia mini 4.0.4 Kernel and flash it
Your mobile is now rooted (See if any Superuser app has been installed on your phone ) and back to life
Click to expand...
Click to collapse
I wouldn't do it with the kernel to flash, cause if something goes wrong you have the ray kernel on mini pro and you will have to try to unlock bootloader and flash other kernel. I would just flash the ftf file for .42 and root, run local-prop and upgrade to ics and run push-root-files.
had $tucked same situation
amphe said:
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Click to expand...
Click to collapse
same was the problem when i rooted live with walkman... thanks to xda i came out of problem ..
problem was with kernel
i did unloked bootloader , flashed cwm and rom but i forgot to flash the kernel so i had $tucked at sonyerrison logo..
flashing computed connected worked for me
Michi_optimus_me said:
I wouldn't do it with the kernel to flash, cause if something goes wrong you have the ray kernel on mini pro and you will have to try to unlock bootloader and flash other kernel. I would just flash the ftf file for .42 and root, run local-prop and upgrade to ics and run push-root-files.
Click to expand...
Click to collapse
If something goes wrong you just flash the official 4.1.b.0.431 ftf with flashtool and the phone will be like new but i root my phone ( Xperia mini St15i stock 4.0.4) with this metod and work like a charm
danutzgtx480 said:
If something goes wrong you just flash the official 4.1.b.0.431 ftf with flashtool and the phone will be like new but i root my phone ( Xperia mini St15i stock 4.0.4) with this metod and work like a charm
Click to expand...
Click to collapse
Hmm okay I think both methods are working but the method with local-prop is easier and for noobs better I think
HELP NEEDED........................... Please
mihahn said:
Hmm okay I think both methods are working but the method with local-prop is easier and for noobs better I think
Click to expand...
Click to collapse
hi to all i have just flashed mu xperia mini rooted GB .62 LOCKED BOOTLOADER with ice cream pureness v3 with x parts CWM and flashed base rom patches and also supersu after reboot my phone stucked at logo when after thinking a lot i just forgot to clean wipe cache partition but when i realized this its too late for me coz when i connected my phone reflash the rom its not showing me the LED notificatio is there any solution for it please help me guys i am total noob and its the only phone i have please do help me thanking you:crying::crying:
jesudas said:
hi to all i have just flashed mu xperia mini rooted GB .62 LOCKED BOOTLOADER with ice cream pureness v3 with x parts CWM and flashed base rom patches and also supersu after reboot my phone stucked at logo when after thinking a lot i just forgot to clean wipe cache partition but when i realized this its too late for me coz when i connected my phone reflash the rom its not showing me the LED notificatio is there any solution for it please help me guys i am total noob and its the only phone i have please do help me thanking you:crying::crying:
Click to expand...
Click to collapse
er its not showing LED notification while using the ROM? or during boot to go into recovery ??
jesudas said:
hi to all i have just flashed mu xperia mini rooted GB .62 LOCKED BOOTLOADER with ice cream pureness v3 with x parts CWM and flashed base rom patches and also supersu after reboot my phone stucked at logo when after thinking a lot i just forgot to clean wipe cache partition but when i realized this its too late for me coz when i connected my phone reflash the rom its not showing me the LED notificatio is there any solution for it please help me guys i am total noob and its the only phone i have please do help me thanking you:crying::crying:
Click to expand...
Click to collapse
Okay, have you got latest flashtool installed? Please install all drivers for all phones and modes from flashtool installation folder -> drivers.
Turn phone off, take off battery, insert battery, hold volume down, connect usb, flash stock rom!
That should work, try it again.
Be sure the custom rom you flash is same as the base you used before. I mean if you flash an ics custom rom, you have to be on ics before, same on gingerbread
Thanks.............
mihahn said:
Just flash the original rom with flashtool. Do it like here.
Have you been on rooted ics or rooted gingerbread? Cause I think you have to be on rooted ics to install real ics, but I don't know exactly
Click to expand...
Click to collapse
Thank you senior..............ya its my bad that i flashed this rom on rooted GB but after reading all instructions from thread i found it and re flashed with stock GB thank you for your reply........................
---------- Post added at 02:39 PM ---------- Previous post was at 02:33 PM ----------
MoonBlade said:
er its not showing LED notification while using the ROM? or during boot to go into recovery ??
Click to expand...
Click to collapse
During Boot to recovery................ any way i found solution for this but thanks a lot for your reply thanks man...............
jesudas said:
Thank you senior..............ya its my bad that i flashed this rom on rooted GB but after reading all instructions from thread i found it and re flashed with stock GB thank you for your reply........................
---------- Post added at 02:39 PM ---------- Previous post was at 02:33 PM ----------
During Boot to recovery................ any way i found solution for this but thanks a lot for your reply thanks man...............
Click to expand...
Click to collapse
Why don't you upgrade to ICS? that way u'll be able to use Real ICS ROM.
Hello Friend
amphe said:
OMG! THANK YOU ALL for your time to read my post and reply me!
PROBLEM SOLVED! I M SO HAPPY!
THANK YOU! THANK YOU!
Click to expand...
Click to collapse
I am having the same problem will you please let me know how the problem is solved.waiting for your valuable reply.
How to flash it..i mean after downloading stock frimware where you put files in flas
plz tell me i have same problem of that ..
Please read this!!!
People with locked bootloaders please read this
u have installed a recovery mode (using x-parts or any other methods) to your system partition. When u flash a rom, it formats system partition. so u can't go back to recovery until u bootup and install it again. to get a permanent recovery, u have to unlock bootloader and flash a kernel that have a recovery mode (it's getting installed to your boot partition). so it won't get wiped by a rom flash.
Hello ravin
You gave us the reason, and a solution for unlocked bootloaders... The question is that the problem happens in locked ones.
Anyone knows how to solve this?
There are plenty of roms for Locked Bl, so it is just a questionvof method with the Cwm installation.
Thanks for your input!
Sent from my LT26i using xda app-developers app
nrdl said:
Hello ravin
You gave us the reason, and a solution for unlocked bootloaders... The question is that the problem happens in locked ones.
Anyone knows how to solve this?
There are plenty of roms for Locked Bl, so it is just a questionvof method with the Cwm installation.
Thanks for your input!
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
You could try opening the rom.zip, replace the files in the zip with the files from cwm (can be found in the forum), zip it again and flash it
Sent from my Nexus 7 running Android 4.2.2
mihahn said:
You could try opening the rom.zip, replace the files in the zip with the files from cwm (can be found in the forum), zip it again and flash it
Sent from my Nexus 7 running Android 4.2.2
Click to expand...
Click to collapse
u mean flashing cwm also with the rom?
that's a great idea!
I was using rooted Stock 4.0.3. I installed CWM recovery. I didnt unlocked bootloader. I did a full wipe but forgot to format cache, data and system. I installed Jelly Sandwich and patched it. When I reboot my phone it stucked at sony logo. When I want to open recovery it also stucks at sony logo. Also when I connect it to charger sony logo appears forever and indication led is not flashing. What can I do to solve this?
rumnheim said:
I was using rooted Stock 4.0.3. I installed CWM recovery. I didnt unlocked bootloader. I did a full wipe but forgot to format cache, data and system. I installed Jelly Sandwich and patched it. When I reboot my phone it stucked at sony logo. When I want to open recovery it also stucks at sony logo. Also when I connect it to charger sony logo appears forever and indication led is not flashing. What can I do to solve this?
Click to expand...
Click to collapse
Flash a stock ftf file
or use pccompanion to repair
then try again and follow the instructions EXACTLY
rumnheim said:
I was using rooted Stock 4.0.3. I installed CWM recovery. I didnt unlocked bootloader. I did a full wipe but forgot to format cache, data and system. I installed Jelly Sandwich and patched it. When I reboot my phone it stucked at sony logo. When I want to open recovery it also stucks at sony logo. Also when I connect it to charger sony logo appears forever and indication led is not flashing. What can I do to solve this?
Click to expand...
Click to collapse
Use flashtool/pcc/SEUS to flash stock firmware again!
After that don't forget to wipe things!!
P.s.- if u aren't able to post probs in official thread due to lack of posts! then pm me!
Sent From my Neo V ruining JellySandwich 5.0 using Tapatalk 2
Thanks everyone. I flashed stock rom using SEUS. Phone boot up without any problem. I rooted and installed CWM then flashed JellySandwich. JellySandwich is working very well.
Kuhhan said:
help..
Click to expand...
Click to collapse
Use flashtool to flash 587 fw
Sent from my »Neo V«
Kuhhan said:
help..
Click to expand...
Click to collapse
What's the issue you face! And what all steps you've done so far?
Sent from my MT11i using xda premium
the issue he faces is he doesnt have 10 posts..nd the steps hes done so far..or rather step is spammin..
hello everybody,i am using sony ericsson xperia neo v cyanogenmod 10 rooted and unlock bootloader....i have some issues and from a video in youtube i try to relock bootloader,now my neo v doesn't open,i try with flashtool to put stock firmware but my phone stuck in sony logo,any help please????
tasosace said:
hello everybody,i am using sony ericsson xperia neo v cyanogenmod 10 rooted and unlock bootloader....i have some issues and from a video in youtube i try to relock bootloader,now my neo v doesn't open,i try with flashtool to put stock firmware but my phone stuck in sony logo,any help please????
Click to expand...
Click to collapse
Did the flash complete successfully?did you relock bootloader?
I couldn't get you clearly!
Sent from my MT11i using xda premium
Good day guys! I have the same problem. It is actually my first time at this so forgive me. I was trying to install CM 10 on my Neo V. So I went to CWM, wiped data/factory, wiped dalvic-cache then went on to installing the rom. It gave the status 7 error. So I went back to the file to remove the getprop lines. Tried to flash it again, but got another error like this "set_perm: some changes failed". After rebooting, I'm stuck at the "SONY" logo. I can't go to CWM anymore and I can't go to fastboot (pressing volume up + plug usb) too. Is there any way to recover my phone? I'll appreciate any help. Thanks!
rspayumo said:
Good day guys! I have the same problem. It is actually my first time at this so forgive me. I was trying to install CM 10 on my Neo V. So I went to CWM, wiped data/factory, wiped dalvic-cache then went on to installing the rom. It gave the status 7 error. So I went back to the file to remove the getprop lines. Tried to flash it again, but got another error like this "set_perm: some changes failed". After rebooting, I'm stuck at the "SONY" logo. I can't go to CWM anymore and I can't go to fastboot (pressing volume up + plug usb) too. Is there any way to recover my phone? I'll appreciate any help. Thanks!
Click to expand...
Click to collapse
You need to install cm compatible kernel... Did you unlock boatloader? Fastboot s menu button and plug usb... Go into flashmode by back button plus usb and flash stock firmware...
Sent from my Xperia Neo V using xda app-developers app
rspayumo said:
Good day guys! I have the same problem. It is actually my first time at this so forgive me. I was trying to install CM 10 on my Neo V. So I went to CWM, wiped data/factory, wiped dalvic-cache then went on to installing the rom. It gave the status 7 error. So I went back to the file to remove the getprop lines. Tried to flash it again, but got another error like this "set_perm: some changes failed". After rebooting, I'm stuck at the "SONY" logo. I can't go to CWM anymore and I can't go to fastboot (pressing volume up + plug usb) too. Is there any way to recover my phone? I'll appreciate any help. Thanks!
Click to expand...
Click to collapse
Did you unlock bootloader before trying out CM based ROMs
Also a clean install is what i'd suggest
First flash The kernel inside the Zip
Then,
Wipe data,cache,dalvik cache
Format data,system,cache
Install your Rom
Also ,Fastboot is not accessed by vol up button but Menu button+plug usb
Attitude.SSJ said:
You need to install cm compatible kernel... Did you unlock boatloader? Fastboot s menu button and plug usb... Go into flashmode by back button plus usb and flash stock firmware...
Sent from my Xperia Neo V using xda app-developers app
Click to expand...
Click to collapse
Wow! That was fast! Thank you very much! Yes, I was able to unlock the phone's bootloader via fastboot way (if you will). I was trying to install cm-10-20130609-NIGHTLY-haida. I believe haida is the correct one for Neo V? Thanks again!
Ghostfreak NB said:
Did you unlock bootloader before trying out CM based ROMs
Also a clean install is what i'd suggest
First flash The kernel inside the Zip
Then,
Wipe data,cache,dalvik cache
Format data,system,cache
Install your Rom
Also ,Fastboot is not accessed by vol up button but Menu button+plug usb
Click to expand...
Click to collapse
Thanks a lot for the fast replies! My bad on the fastboot buttons. I was able to figure that out now and also the flashmode. Right now I'm trying to download Mt11i_4.1.B.0.431_customized cenral europe 3.ftf.7z. I believe this is the stock ftf for Neo V? Another question, the boot.img is the kernel inside the cm-10-20130609-NIGHTLY-haida.zip right? Should I install it using flashmode? or should I use the CWM to install kernel? I'm really sorry for the newbie questions, I have been trying to find the answers myself but there are a ton of info and videos that always give different ways to do them. Obviously, I followed one that did not work for me. Thank you again! I'll post updates.
rspayumo said:
Wow! That was fast! Thank you very much! Yes, I was able to unlock the phone's bootloader via fastboot way (if you will). I was trying to install cm-10-20130609-NIGHTLY-haida. I believe haida is the correct one for Neo V? Thanks again!
Thanks a lot for the fast replies! My bad on the fastboot buttons. I was able to figure that out now and also the flashmode. Right now I'm trying to download Mt11i_4.1.B.0.431_customized cenral europe 3.ftf.7z. I believe this is the stock ftf for Neo V? Another question, the boot.img is the kernel inside the cm-10-20130609-NIGHTLY-haida.zip right? Should I install it using flashmode? or should I use the CWM to install kernel? I'm really sorry for the newbie questions, I have been trying to find the answers myself but there are a ton of info and videos that always give different ways to do them. Obviously, I followed one that did not work for me. Thank you again! I'll post updates.
Click to expand...
Click to collapse
Yup boot.img is the kernel
Flash it using fastboot mode
Then flash the Rom
Sent from my Neo v using xda premium
Ghostfreak NB said:
Yup boot.img is the kernel
Flash it using fastboot mode
Then flash the Rom
Sent from my Neo v using xda premium
Click to expand...
Click to collapse
Goodnews to me! I was able to revive my Neo V, big big thanks to your help. I was able to install the stock ICS ftf.
So at this time, will I start again at the beginning like root, unlock bootload, install CWM again? I'm not giving up yet on this thing. :fingers-crossed: I tried to access CWM, but it is not loading at this moment so I'm guessing I have to install that again, right? Thanks again! I hope you won't give up on my newbie questions.
rspayumo said:
Goodnews to me! I was able to revive my Neo V, big big thanks to your help. I was able to install the stock ICS ftf.
So at this time, will I start again at the beginning like root, unlock bootload, install CWM again? I'm not giving up yet on this thing. :fingers-crossed: I tried to access CWM, but it is not loading at this moment so I'm guessing I have to install that again, right? Thanks again! I hope you won't give up on my newbie questions.
Click to expand...
Click to collapse
Just flash the cm kernel... You ll get cwm... Use it to flash the rom... Don't forget to do wipes...
Sent from my Xperia Neo V using xda app-developers app
Attitude.SSJ said:
Just flash the cm kernel... You ll get cwm... Use it to flash the rom... Don't forget to do wipes...
Sent from my Xperia Neo V using xda app-developers app
Click to expand...
Click to collapse
Will try that! Thanks sir! Big thumbs up for you! :good: I'll still post updates... :fingers-crossed:
Just to update my case, finally, I was able to install CM 10 rom successfully. I guess the one that messed my first try is the franco kernel I installed initially before installing CM 10. Thanks a lot to all who helped! I do appreciate it very much! :good:
rspayumo said:
Just to update my case, finally, I was able to install CM 10 rom successfully. I guess the one that messed my first try is the franco kernel I installed initially before installing CM 10. Thanks a lot to all who helped! I do appreciate it very much! :good:
Click to expand...
Click to collapse
franko kernel :laugh:.. that was for nexus devices :silly:... use the kernels & roms in neo forums for neo .. :good:
Flash proper kernel and stok
I have Xperia Neo V running on ICS 4.0.4
Bootloader unclocked: Yes
Rooted: Yes
CWM Recovery Installed : Yes
CWM ROM backUp : Yes
wipe data/ dalvic
flashed Pacman latest rom// success
flashed Gapps// Success
Rebooted, now cannot go past Sony logo and cannot go to recovery also. Looks like I am soft bricked.
Please advice.
You forgot to install the kernel which was present inside the zip.
svprm said:
You forgot to install the kernel which was present inside the zip.
Click to expand...
Click to collapse
Where was that file. I just have haida_PAC_jb-alpha-v15.0.0.zip
What should I do to fix my phone now. I can only go to fastboot mode.
aashishbhargav said:
Where was that file. I just have haida_PAC_jb-alpha-v15.0.0.zip
What should I do to fix my phone now. I can only go to fastboot mode.
Click to expand...
Click to collapse
It should be inside the zip as the op said in Neo V thread of PAC.
If you found it, do everything again. Here you got a how to (its for ray and arc but works for you to):
http://forum.xda-developers.com/showthread.php?p=33572615
dont forget to hit thanks for information, especially to op of named threads
best regards
Just change kernel.The Kernel inside .zip(Haida PAC JB ...).U have to install it with Fastboot method or flashtool software...please read carefully man....
the kernel is built-in with Recovery...
Thank for all those who helped.
I had to flash kernel via flashtool in fastmode.
I have been a samsung user since 2 years. Happily flashing.
Did not know that kernel had to be flashed before flashing rom
Thanks for help :good:
factory reset and wipe all will help u
same problem
aashishbhargav said:
Thank for all those who helped.
I had to flash kernel via flashtool in fastmode.
I have been a samsung user since 2 years. Happily flashing.
Did not know that kernel had to be flashed before flashing rom
Thanks for help :good:
Click to expand...
Click to collapse
ok so i did the same (did not flash kernel).................but now after flashing the .431 kernel via flashtool it is still not happening......it wont go past the sony logo..........when i try with SEUS it says i already have the latest software installed...........please help.
Flash whole stock firmware with flashtool so you are able to boot phone.
Then when you will know the right steps, put rom .zip into sd, flash the right kernel and finally install rom via cwm following dev's instructions.
To flash a custom kernel you need unlocked bootloader.
Sent from my MT15i using xda app-developers app
varun_Gimmic said:
ok so i did the same (did not flash kernel).................but now after flashing the .431 kernel via flashtool it is still not happening......it wont go past the sony logo..........when i try with SEUS it says i already have the latest software installed...........please help.
Click to expand...
Click to collapse
you flashed .431 kernel but u had to flash kernel from inside zipped ROM file (img file)
How to Flash PACman ROM (first time)
1 - MAKE BACKUP
2 - download rom zip file, store it somewhere on your SD card (I have a "FlashFiles" folder)
3 - copy boot.img from zip to pc, where you can find it
4 - flash kernel in ROM zip file in fastboot mode
5 - reboot into recovery
!! did you make a backup ??
6 - flash ROM
7 - flash gapps (or inverted gapps if you want)
8 - factory reset
9 - wipe cache
10 - wipe dalvik cache
11 - flash any other zip's you need/want to (e.g. wifi modules if you usin other kernel as in the zip)
12 - reboot
13 - enjoy
14 - click on THANKS button in szl's Original Post
aashishbhargav said:
I have Xperia Neo V running on ICS 4.0.4
Bootloader unclocked: Yes
Rooted: Yes
CWM Recovery Installed : Yes
CWM ROM backUp : Yes
wipe data/ dalvic
flashed Pacman latest rom// success
flashed Gapps// Success
Rebooted, now cannot go past Sony logo and cannot go to recovery also. Looks like I am soft bricked.
Please advice.
Click to expand...
Click to collapse
I happened to soft-brick my Neo V few days back after installing a custom ROM. Please read on to see what helped me get my Neo V up and running again.
If your phone is stuck at SONY logo, I doubt it will go into CWM recovery mode either. I had tried flashing stock kernel through Flashtool, and also tried the FOTA-Unbrick method via flashtool, but even that didn't help. Finally, I used the "repair" option in PC Companion which flashed Stock ICS ROM on my Neo V (however, all data on phone's internal memory was lost and my phone had to e rooted again). But at least my phone was recovered. Hope this will guide you.
Flashing PAC man ROM
varun_Gimmic said:
ok so i did the same (did not flash kernel).................but now after flashing the .431 kernel via flashtool it is still not happening......it wont go past the sony logo..........when i try with SEUS it says i already have the latest software installed...........please help.
Click to expand...
Click to collapse
Please read carefully :
U have to have a rooted and bootloader unlocked in phone to flash ROMs (OBVIOUS )
1)Copy the contents to your SDCARD of phone (ROM ZIP File + gapps ZIP)
2) Extract only the boot.img from the ROM zip to some location in your PC
3) Use Flashtool to flash the boot.img (FIRST THING TO DO)
3.a) Select Fastboot mode from flashtool
3.b) While the phone is connected, Click Fastboot phone using ADB.(Phone will restart and blue led will glow showing its in fast boot mode)
3.c) Now select the option, select kernel to flash in the window and chose the boot.img that is in the PC.
Now the flashtool automatically flashes the boot.img(which has the kernel included).
Unplug from PC and try to reboot.. On booting enter CWM mode and flash the ZIP already placed in the SDCARD(Ensure to follow the appropriate post to follow steps like clearing cache\Dalvik and system etc..).
HAPPY FLASHING
NEO V | PAC MAN 18
Hit Thanks if my words lightened you hair :highfive:
superb PRAVIN89 i think u r a teacher
superb Xplaination
---------- Post added at 01:34 AM ---------- Previous post was at 01:30 AM ----------
superb PRAVIN89 i think u r a teacher :victory::victory::victory::victory::victory:
superb Xplaination
@Sam: Lol. Thanks.. And Nope I'm not a teacher. ... Never had that thought too
Hit thanks if helped
Sent from mt11i
Kuhhan said:
download link..
Click to expand...
Click to collapse
Which link are you looking for? Download link is in first post of op
Sent from my Galaxy Nexus using Tapatalk 2
I think he's just spamming to get to post in Development section
Sent from my MT11i using xda premium
Hi everybody, I've just rooted, installed CWM and flash experience v2.1 and everything worked.
Than I flashed AC!D, wiped, then flashed Cybeshot 4, wiped, then flashed cybershot 5. After that I rebooted and from that moment it is in bootloop. I've already, wiped and reflashed the ROM, but it continues to reboot and a couple of times also the AROMA installer got stuck.
I really need help. What can I do to fix it? I mean, there's no reason why it shouldn't work after the flash, right?
Wipe everything (data system etc etc) then flash some ics kernel.. Then flash official ics .54ftf... This should work:thumbup:
Flash official ics firmware using flashtool
rakz992 said:
Wipe everything (data system etc etc) then flash some ics kernel.. Then flash official ics .54ftf... This should work:thumbup:
Click to expand...
Click to collapse
I've got a .10.ftf and a .54.ftf kernels. I've created a zip for each other, then selected install zip form sd card in CWM, but it says installation aborted. Why? What's wrong now?
Mokiwipeout said:
Flash official ics firmware using flashtool
Click to expand...
Click to collapse
I cannot flash via flashtool because I can only work in CWM and flashtool doesn't recognize the phone in that modality.
You mean to say flashtool doesn't recognise you're mobile?? In that case.. You are missing some flashtool drivers.. You'll find them in /flashtool/drivers/ whichever folder you've installed flashtool in... After this flashtool should recognise you're device... If it doesn't then try flashing any ics kernel through cwm.. You'll find them in dev thread.. N then flash ics Rom
rakz992 said:
You mean to say flashtool doesn't recognise you're mobile?? In that case.. You are missing some flashtool drivers.. You'll find them in /flashtool/drivers/ whichever folder you've installed flashtool in... After this flashtool should recognise you're device... If it doesn't then try flashing any ics kernel through cwm.. You'll find them in dev thread.. N then flash ics Rom
Click to expand...
Click to collapse
Remember that I can access only the CWM screen, flashtool can recognize the mobile even in CWM mode?
However, I've already tried to flash the kernel via CWM, but it says installation aborted. I've zipped .10 and .54 kernel in two different zip and renamed them kernel.10.zip and kernel.54.zip.
What's wrong?
EDIT: ok, I've been able to use flashtool. I've flashed .10 kernel, then flashed .54 kernel, then reinstalled experience ROM, wiped and restarted. It continuos to bootloop. Now I try to flash a stock ICS ROM.
acvtre said:
Remember that I can access only the CWM screen, flashtool can recognize the mobile even in CWM mode?
However, I've already tried to flash the kernel via CWM, but it says installation aborted. I've zipped .10 and .54 kernel in two different zip and renamed them kernel.10.zip and kernel.54.zip.
What's wrong?
Click to expand...
Click to collapse
Omg in order to use flash tool, just shut down ur phone, and then press the power button and the volume down button. If the led becomes green then u can succesfully use flash tool... Man, do some research first!
And also, get the ftf file by extracting the zip....
Mokiwipeout said:
Omg in order to use flash tool, just shut down ur phone, and then press the power button and the volume down button. If the led becomes green then u can succesfully use flash tool... Man, do some research first!
And also, get the ftf file by extracting the zip....
Click to expand...
Click to collapse
I've mandaged to flash the kernels .10 and .54 via flashtool. Then reinstalled experience ROM and continuos to bootloop.
acvtre said:
I've mandaged to flash the kernels .10 and .54 via flashtool. Then reinstalled experience ROM and continuos to bootloop.
Click to expand...
Click to collapse
Man!! Just flash official ie stock .54 ftf file through flashtool!! Just this nothing else!! No kernel no nothing! Just ftf!!
dont install any rom!!! just flash the ftf file god dammit
rakz992 said:
Man!! Just flash official ie stock .54 ftf file through flashtool!! Just this nothing else!! No kernel no nothing! Just ftf!!
Click to expand...
Click to collapse
Ok, now I've wiped and flashed only MT27_6.1.1.B.1.54_KERNEL.ftf file through flashtool. Restarted the phone and it continuos to bootloop. When the phone says preparing internal storage it restart the phone.
sorry for my noobage. Now I've flashed MT27i_6.1.1.B.1.54_Global.ftf (big file) and flashtool had a problem. It says "err severity=major err code="0009"" err dynamic: block verification failed".
Now the phone continuosly shows screen with "sony".
Now what can I do? Can't even enter in CWM mode.
Ok, I've solved the problem. The last firmware I flashed was for unlocked xperia sola, this is why I had problems. Now I've resolved the softbrick thanks to a guide of doctor_droid.
Now I have to reroot and reinstall CWM, right?
Also thanks to you guys for your patience.
Yes... N after you install cwm.. Please make a back up through cwm for god sake!! happy rooting!! :thumbup:
Another question: the first time that the bootloop started was when I flashed cybershot and ac!d without restarting.
Do you think that the bootloop started because I haven't resarted between the two flashes?
Nothing as such.. May be conflicts between cybershot n acid files!! It's better you restart everytime you flash.. N do wipe cache partition n dalvik
Oh gosh, another funny problem. Got a problem with rooting.
I've flashed .10.tft kernel, then run "runme.bat" (from rootwithrestore) and this time says that there's "old adb" or something like that. However, I manage to conclude the process, but when I reboot I've got black screen. After that I've flashed the .54.tft file and the phone works fine, but there's no SuperSU app. So I suppose it's not rooted.
What's wrong with the runme.bat?
Yep not rooted!! Try again!!