Some help would be lovely! Plenty of details inside. - Android Q&A, Help & Troubleshooting

Hi There,
First off, I hate to be the person who has a 0 post count and is already asking questions, however, I am more than willing to offer a financial gift for anyone who is able to help me.
I live in China and recently purchased a "replica" iPhone 5 - the built quality is incredible at the phone is (was) very fast and responsive. Unfortunatley I have managed to clear the mmc and have lost certain start up screens and menus.
I do not know if I am using a zoophone/goophone/whatever and therefore I am not sure of the correct ROM to download or how to install it. I have managed to get the phone into factory mode by holding down the volume and power button.
The phones details are as follows:
BB Chip: MT6575
MS Board: mobitek75_ics2
Kernel Ver: 3.0.13 [email protected])
Android Ver. 4.1.5
SW Ver: ALPS.ICS2.MP.V1.20
Custom Build Verno: 1354360992
Any help would be greatly apreciated.
Kind Regards,
Tony

Odp: Some help would be lovely! Plenty of details inside.
There's no Android version called for 4.1.5. Android 4.1 was updated to 4.1.2, not 4.1.5.
Sent from my Nexus 7 using Tapatalk HD

VaderSKN said:
There's no Android version called for 4.1.5. Android 4.1 was updated to 4.1.2, not 4.1.5.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
Most knock off devices do not use an official version of android as is the case here.
For the OP. You will not find much help here as we don't support knock off devices.
Wayne Tech S-III

Related

just cant root GS3 bought in china

Hi there
Was in china last week and bought a GS3, not sure if its real or not so this may have an effect on my problems, but ive done some speed tests and its as fast as my friends GS3
ive also got a galaxy s advance but have never rooted a phone at all but im pretty good at following instructions,
ive followed all the tutorials I can find an basicly cant get my phone into download mode.
when i turn the phone off, hold down vol - home button and powers button the phone goes to a screen with an android on its back with a exclamation mark in a red triangle if i then press the home button i get the android system recovery list (3e) and can move up and down the list but the home button doesn't seem to select anything.
the phone works works fine but have a few annoying Chinese app on it i cant install hence the reason I want to put 4.1 on it
any help would be much much appreciated
the info ive found out is
kernal version - 3.0.13 ([email protected]) (gcc version 4.4.3
VBOOT ver - 2010.06
android ver - 4.0.4
sw ver - ALPS.ICS.MP.V.6
thanks
jon
First of all, check if you have a genuine Galaxy S III using this app:
https://play.google.com/store/apps/details?id=com.alxdroiddev.gs3identity
(it is also available here: http://forum.xda-developers.com/showthread.php?t=1976814)
If you get a "No match" message, you have a fake Galaxy S III.
seka1980 said:
Hi there
Was in china last week and bought a GS3, not sure if its real or not so this may have an effect on my problems, but ive done some speed tests and its as fast as my friends GS3
ive also got a galaxy s advance but have never rooted a phone at all but im pretty good at following instructions,
ive followed all the tutorials I can find an basicly cant get my phone into download mode.
when i turn the phone off, hold down vol - home button and powers button the phone goes to a screen with an android on its back with a exclamation mark in a red triangle if i then press the home button i get the android system recovery list (3e) and can move up and down the list but the home button doesn't seem to select anything.
the phone works works fine but have a few annoying Chinese app on it i cant install hence the reason I want to put 4.1 on it
any help would be much much appreciated
the info ive found out is
kernal version - 3.0.13 ([email protected]) (gcc version 4.4.3
VBOOT ver - 2010.06
android ver - 4.0.4
sw ver - ALPS.ICS.MP.V.6
thanks
jon
Click to expand...
Click to collapse
Smells like a fake phone from the info... Do like simonetti wrote test with the app and see for yourself
its fake proof below .
kernal version - 3.0.13 ([email protected]) (gcc version 4.4.3
VBOOT ver - 2010.06
android ver - 4.0.4
sw ver - ALPS.ICS.MP.V.6
jje
testadeferro said:
Smells like a fake phone from the info... Do like simonetti wrote test with the app and see for yourself
Click to expand...
Click to collapse
thanks guys just installing app now
if it is a fake is it still rootable?
seka1980 said:
thanks guys just installing app now
if it is a fake is it still rootable?
Click to expand...
Click to collapse
yes try this work for me
http://forum.xda-developers.com/showthread.php?t=1921178
but i have problem where i can find custom rom or i can u for original i9300 s3
u have to chick if u have 6575 cpu or 6577 first befor rooting
ok just installed it and yes its a copy
seka1980 said:
ok just installed it and yes its a copy
Click to expand...
Click to collapse
use the link up i provide to you this method for china model check which cpu u have first
ask me for any help

[Q] Rooting Leader Impression i7A

I have looked around for a while and checked the last time I posted to a similar thread but to no avail. So, I am creating a separate thread for this tablet since it differs from it's predecessor - Impression i7.
I've looked for a way to root it but haven't found a specific usb driver that works right and I've tried a few things others explained and that hasn't worked either. All the times I've tried end up not rooting the device at all. Originally I wanted to do this to add Google Play's store but I am looking to use the rooting for space saving and app management. Here are my details again:
Model: i7a (NOT an i7)
Android: 4.0.4
Baseband: 1.4rc3
Kernel: 3.0.8
Build: crane_i7a-4.0.4-20120712-US
Dervius said:
I have looked around for a while and checked the last time I posted to a similar thread but to no avail. So, I am creating a separate thread for this tablet since it differs from it's predecessor - Impression i7.
I've looked for a way to root it but haven't found a specific usb driver that works right and I've tried a few things others explained and that hasn't worked either. All the times I've tried end up not rooting the device at all. Originally I wanted to do this to add Google Play's store but I am looking to use the rooting for space saving and app management. Here are my details again:
Model: i7a (NOT an i7)
Android: 4.0.4
Baseband: 1.4rc3
Kernel: 3.0.8
Build: crane_i7a-4.0.4-20120712-US
Click to expand...
Click to collapse
Mine came rooted out of the box
Use framaroot, it should help you for sure!
Sent from my Micromax A120 using XDA Premium HD app

Seeking Advice to root Allwinner A13

I'm looking for some advice about rooting my android device. I'd like su permission, so I can remove protected bloatware, use apps such as Root Explorer, etc.
The device is listed on Amazon as an Allwinner A13 (correct, I think) with Android 4.0. However, on my "tablet information" screen, the Android version is given as 4.1.1.
Here's all the info from the "about tablet" tab on the settings screen:
Model number: Q88.
Android version: 4.1.1
Baseband version: v0.4rc3
Kernel version: 3.0.8+ [email protected] #284
Build number: nuclear_evb-eng 4.1.1 JRO03C 20130531 test-keys
The device arrived with no clear documentation, and it's a bit hit-and-miss what you end up with, with these - my friend ordered the same item and ended up with a device with different apps installed, and his device was already rooted when he took it out of the box!
Is there a way to root without using a computer? (I don't have ready access to a PC right now.) I've tried Poot and a couple of other apps, but no luck so far.
Thanks in advance for any help; I'll be eternally grateful.
Sent from my Q88 using xda app-developers app
I need help too... My version is 4.2.2... Model Q88.. Firmware/v0.4rc3.. Kernel 3.0.8+ [email protected] #40. Build number- nuclear_xw711-eng 4.2.2 JDQ39 20130626 test-keys..... PLEASE!!!! Help us... We gladly appreciated....
Sent from my PC36100 using xda premium
Ah, someone in the same boat. Have you found any more info on rooting these, since your post? They obviously can be rooted - as I said, I know someone with the same model, Q88, that already had full root access, straight out of the box.
Let me know if you find anything out; I'm still looking.
With the poot/ministro method, I'm just getting an error message about a "daemon has materialised". It hasn't harmed my device, but neither am I any closer to su permission.
[rant]We really shouldn't have to jump through any hoops to get control over our own devices. Imagine if you bought a PC, and you didn't have admin access to Windows. If you ask why, you're told: "well, you might delete your system files, and we can't trust you not to!"[/rant]
Sent from my Q88 using xda app-developers app
My tablet is a allwinner a13 too. And this process worked flawlessly. But you have to use a computer.
http://forum.xda-developers.com/showthread.php?t=2166967
Sent from my Luna TAB07-100 using xda app-developers app
Cheers, I'll have to work on getting hold of a PC to use, to try that method. Thanks for the post.
Sent from my Q88 using xda app-developers app
Matthew_Shute said:
I'm looking for some advice about rooting my android device. I'd like su permission, so I can remove protected bloatware, use apps such as Root Explorer, etc.
The device is listed on Amazon as an Allwinner A13 (correct, I think) with Android 4.0. However, on my "tablet information" screen, the Android version is given as 4.1.1.
Here's all the info from the "about tablet" tab on the settings screen:
Model number: Q88.
Android version: 4.1.1
Baseband version: v0.4rc3
Kernel version: 3.0.8+ [email protected] #284
Build number: nuclear_evb-eng 4.1.1 JRO03C 20130531 test-keys
The device arrived with no clear documentation, and it's a bit hit-and-miss what you end up with, with these - my friend ordered the same item and ended up with a device with different apps installed, and his device was already rooted when he took it out of the box!
Is there a way to root without using a computer? (I don't have ready access to a PC right now.) I've tried Poot and a couple of other apps, but no luck so far.
Thanks in advance for any help; I'll be eternally grateful.
Sent from my Q88 using xda app-developers app
Click to expand...
Click to collapse
Use Uberizer v1.8 which can be found at techknow.me
Hello. Can anyone help me to root my tablet? It's Mytec MT737.
BuildInfos:
Android Version : 4.2.2
Release Codename: REL
API LEVEL : 17
CPU ABI : armeabi-v7a
Hardware: sun8i
Board : exdroid
Brand: Allwinner-Tablet
Device: polaris-p1
Display : GT736FB25Cd-TPa2-V1.0.0.0-20140327release
Please, anyone.. Help me..
FYI, already tried One Click Root, Kingo Root, E-Root, Myamar Root, Master Root....No luck..Cant root either..FYI also, i cant detect where my adb on sdcard.. and....theres no auto install phone device when i connected my tablet to PC via USB..Please9.. Help me......ANyone????Tysm for advance....

[Q] [ROM] Lenovo A850c (Chinese Clone!) ROM Request

Regards, Droiders!
I just bought a Lenovo A850 Clone from china (aliexpress). It's model is lenovoa850c
aliexpress.com/snapshot/6008093008.html
(Please, let's not discuss if it's a good phone or not. It's irrelevant and will spoil the thread)
(Note that the Original Lenovo has a 5.5" screen, and the clone has only 5")
I don't like the Default ROM, so I want to install a new one. Of course, this phone has none that I could find.
My phone is already rooted, and CWM (Clockworkmod) is already flashed in as recovery boot.
I tried installing a ROM for the original Lenovo 850, but the phone never booted (the jellybean android boy popped up infinitely)
- What do you suggest?
- Do you know any compatible ROM?
- Should I try other Lenovo 850 ROMs?
----------------------------------------
Hardware : MT6572 (MT6589 is Fake!)
Model : lenovoA850c
Build number : ALPS.JB3.MP.V1.6
Build date UTC : 20130928-154238
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V4.P1, 2013/08/23 14:18
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Sat Sep 28 23:40:38 HKT 2013
Uboot build v : -----
LCD Driver IC : 1-otm9605a_dsi_vdo_lcm_drv
--------------------------------------------------------------------
Thanks
Anyone? I have a new phone waiting to be sensually touched by me, but I need the ROM!
I've tried with Goo Manager, and it didn't return compatible roms.
I've searches a lot online, and couldn't find it either.
How can I find the most compatible one? What should I compare to find a possible match?
What hardware information is important?
Bump for me. I need a ROM
Have you tried with CyanogenMod ?
Hi. I recently aquired this phone and i hardly need a new rom. It always has full ram memory used, the touch feedback is not that nice and the sound is very low, specially when using earphones. I couldn't find any rom, not even cyanogen. Not know how hard it is to make one, but we can try team up and build some.
Thanks.
Also, any other forum opened for the A850c?
Sent from my lenovoA850c using XDA Free mobile app
vali.mvf said:
Hi. I recently aquired this phone and i hardly need a new rom. It always has full ram memory used, the touch feedback is not that nice and the sound is very low, specially when using earphones. I couldn't find any rom, not even cyanogen. Not know how hard it is to make one, but we can try team up and build some.
Thanks.
Also, any other forum opened for the A850c?
Sent from my lenovoA850c using XDA Free mobile app
Click to expand...
Click to collapse
Your issue is that clone devices do not release the kernel source for it so no custom ROMs.
Bat cave One
I see. But isn't there any way to find that kernel, or use an existing one? I find the processor on this phone pretty popular.
Sent from my lenovoA850c using XDA Free mobile app
vali.mvf said:
I see. But isn't there any way to find that kernel, or use an existing one? I find the processor on this phone pretty popular.
Sent from my lenovoA850c using XDA Free mobile app
Click to expand...
Click to collapse
No each device has specific kernel files. Without the proper source code you are out of luck.
The processor is only popular on China based devices. None of the big names use it.
Then you get into needing to build a recovery for it.
Bat cave One
zelendel said:
No each device has specific kernel files. Without the proper source code you are out of luck.
The processor is only popular on China based devices. None of the big names use it.
Then you get into needing to build a recovery for it.
Bat cave One
Click to expand...
Click to collapse
It sounds like I didn't pick such a good phone. Thus i saw a lot of mods for the A850 model. Not sure if there is the same processor, but couldn't that kernel work? I'm able to involve some time in this, but my knowledge about kernels and mobile software is not much.
I kinda find this phone pretty popular, but it seems like i'm wrong. Could you guys tell me if I should sell my new A850c and buy sth similar at the same price but more popular? I really need a clean and optimized rom on my phone to use it a it's maximum perfomance. And the touch feedback is killing me. Try play dots on this phone if you have it. It annoys you.
Another problem appeared. The GPS is not working and i really need it. After some research i found out that "they only provide location in China". Is there anything i can do? Even some fake coordinates would help me.
Thanks.
Hi. Can someone with the rooted phone send me a back-ul with all rom's included apps? I removed a lot of them and lost the back-up. Now i've reseted the phone and i really need the default apps.

Password Lockout Issue

Hi, Xda Devs
I would like to ask if anyone of you has experienced password lockout on Xtreme Play Generation 2 MST-711, though i think of flashing this device would be my last resort because as far as i know the tab doesn't come with Android Recovery Mode support hoping that would be my solution on fixing such a minor problem, it means that key combinations like volume + plus power button is not working. Is there any available stock rom for this device? or any equivalent stock rom that works fine with my device that can be downloaded? or is there any other way on how to fix this.
Specs:
Model: MST-711
Android: 4.1.1 (JellyBean)
Processor: ARM Cortex A8
Kernel Version: 3.0.8+
Build Number: JRO03C-20140313
Hope i get a help here, Thank you in advance

Categories

Resources