just cant root GS3 bought in china - Galaxy S III Q&A, Help & Troubleshooting

Hi there
Was in china last week and bought a GS3, not sure if its real or not so this may have an effect on my problems, but ive done some speed tests and its as fast as my friends GS3
ive also got a galaxy s advance but have never rooted a phone at all but im pretty good at following instructions,
ive followed all the tutorials I can find an basicly cant get my phone into download mode.
when i turn the phone off, hold down vol - home button and powers button the phone goes to a screen with an android on its back with a exclamation mark in a red triangle if i then press the home button i get the android system recovery list (3e) and can move up and down the list but the home button doesn't seem to select anything.
the phone works works fine but have a few annoying Chinese app on it i cant install hence the reason I want to put 4.1 on it
any help would be much much appreciated
the info ive found out is
kernal version - 3.0.13 ([email protected]) (gcc version 4.4.3
VBOOT ver - 2010.06
android ver - 4.0.4
sw ver - ALPS.ICS.MP.V.6
thanks
jon

First of all, check if you have a genuine Galaxy S III using this app:
https://play.google.com/store/apps/details?id=com.alxdroiddev.gs3identity
(it is also available here: http://forum.xda-developers.com/showthread.php?t=1976814)
If you get a "No match" message, you have a fake Galaxy S III.

seka1980 said:
Hi there
Was in china last week and bought a GS3, not sure if its real or not so this may have an effect on my problems, but ive done some speed tests and its as fast as my friends GS3
ive also got a galaxy s advance but have never rooted a phone at all but im pretty good at following instructions,
ive followed all the tutorials I can find an basicly cant get my phone into download mode.
when i turn the phone off, hold down vol - home button and powers button the phone goes to a screen with an android on its back with a exclamation mark in a red triangle if i then press the home button i get the android system recovery list (3e) and can move up and down the list but the home button doesn't seem to select anything.
the phone works works fine but have a few annoying Chinese app on it i cant install hence the reason I want to put 4.1 on it
any help would be much much appreciated
the info ive found out is
kernal version - 3.0.13 ([email protected]) (gcc version 4.4.3
VBOOT ver - 2010.06
android ver - 4.0.4
sw ver - ALPS.ICS.MP.V.6
thanks
jon
Click to expand...
Click to collapse
Smells like a fake phone from the info... Do like simonetti wrote test with the app and see for yourself

its fake proof below .
kernal version - 3.0.13 ([email protected]) (gcc version 4.4.3
VBOOT ver - 2010.06
android ver - 4.0.4
sw ver - ALPS.ICS.MP.V.6
jje

testadeferro said:
Smells like a fake phone from the info... Do like simonetti wrote test with the app and see for yourself
Click to expand...
Click to collapse
thanks guys just installing app now
if it is a fake is it still rootable?

seka1980 said:
thanks guys just installing app now
if it is a fake is it still rootable?
Click to expand...
Click to collapse
yes try this work for me
http://forum.xda-developers.com/showthread.php?t=1921178
but i have problem where i can find custom rom or i can u for original i9300 s3
u have to chick if u have 6575 cpu or 6577 first befor rooting

ok just installed it and yes its a copy

seka1980 said:
ok just installed it and yes its a copy
Click to expand...
Click to collapse
use the link up i provide to you this method for china model check which cpu u have first
ask me for any help

Related

Some help would be lovely! Plenty of details inside.

Hi There,
First off, I hate to be the person who has a 0 post count and is already asking questions, however, I am more than willing to offer a financial gift for anyone who is able to help me.
I live in China and recently purchased a "replica" iPhone 5 - the built quality is incredible at the phone is (was) very fast and responsive. Unfortunatley I have managed to clear the mmc and have lost certain start up screens and menus.
I do not know if I am using a zoophone/goophone/whatever and therefore I am not sure of the correct ROM to download or how to install it. I have managed to get the phone into factory mode by holding down the volume and power button.
The phones details are as follows:
BB Chip: MT6575
MS Board: mobitek75_ics2
Kernel Ver: 3.0.13 [email protected])
Android Ver. 4.1.5
SW Ver: ALPS.ICS2.MP.V1.20
Custom Build Verno: 1354360992
Any help would be greatly apreciated.
Kind Regards,
Tony
Odp: Some help would be lovely! Plenty of details inside.
There's no Android version called for 4.1.5. Android 4.1 was updated to 4.1.2, not 4.1.5.
Sent from my Nexus 7 using Tapatalk HD
VaderSKN said:
There's no Android version called for 4.1.5. Android 4.1 was updated to 4.1.2, not 4.1.5.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
Most knock off devices do not use an official version of android as is the case here.
For the OP. You will not find much help here as we don't support knock off devices.
Wayne Tech S-III

Cannot get in to download mode,tu update to jelly bean

I have a problem,I want to update my i9300 to jelly bean 4.1.2,I have downloaded everything I need for the update,but I can't go into download mode.Usb debbuging is selected.I turn off my phone and hold home+volume down+power button but it enters factory mode instead of download mode.What should I do?
Thanks in advance!
factory mode? that's download mode for ya
Glebun said:
factory mode? that's download mode for ya
Click to expand...
Click to collapse
You have right.
#edzaskadka
When you press theses buttons ( hold home + volume down + power button) => you are on the download mode already
thank you
but when i enter that factory mode(download mode)
i get a menu where is
Full Test
Item Test
Test Report
Clear eMMC
Version
Reboot
So what should i enter if i want to update trough Odin.Or i should just stay in that Menu?
It's probably just a fake chinese clone then
Go to settings/about phone and post details please
Details from settings about phone should tell if its another fake .
jje
Status
Legal Information
Model Number
GT-19300
Android version 4.1.1
Baseband version
MAUI.11AMD.W11.50.SP.V12,2012/09/20
18:56
Kernel version
3.0.13
[email protected] #1
Sat Dec 8 12:31:35 CST 2012
Build number
ALPS.ICS.MP.V2.6
Custom build version
010511208
edzaskadka said:
Status
Legal Information
Model Number
GT-19300
Android version 4.1.1
Baseband version
MAUI.11AMD.W11.50.SP.V12,2012/09/20
18:56
Kernel version
3.0.13
[email protected] #1
Sat Dec 8 12:31:35 CST 2012
Build number
ALPS.ICS.MP.V2.6
Custom build version
010511208
Click to expand...
Click to collapse
If the phone is a true galaxy s3 the model number should be GT- I9300 not a number 1 as above. A quick google search for a GT-19300 bring up the words 'fake' and 'clone' ... that sucks.
definitely a clone, samsung uses a completely different version naming principle
Baseband version
MAUI.11AMD.W11.50.SP.V12,2012/09/20
Kernel version
3.0.13
[email protected] #1
Build number
ALPS.ICS.MP.V2.6
Custom build version
010511208
All say
Its a fake / clone use Google to find a fake Chinese clone forum .
Sorry nothing for you on this forum .
jje
Check here too, looks like there's a few about.
http://forum.xda-developers.com/showthread.php?t=1937068
squ89r97 said:
If the phone is a true galaxy s3 the model number should be GT- I9300 not a number 1 as above. A quick google search for a GT-19300 bring up the words 'fake' and 'clone' ... that sucks.
Click to expand...
Click to collapse
That was my bad, i was writing really fast
it does say GT-I9300
I really don't think that it is a fake, because the camera is incredible, like it should be on a samsung galaxy s3
It looks exactly like a real thing not those clones, plus the performance, it feels like a quad core processor, because it never lags.Then there is the software it self, which is exactly like it should be.And the voice search is spot on either. And i checked the IMEA as well and it showed that it is genuine.
so does it have Smart Stay, Swipe to capture, Direct call, Smart alert and other samsung features? No? It's a fake.
edzaskadka said:
I really don't think that it is a fake,
Your choice but its not an I9300 so do not flash any firmware from here .
Via Google plenty more will say the same plenty identical posts on this forum as well .
the trouble is all the chinese clones are also I9300's... The difference is that most have a completely different CPU (mtk6575/77), are a heap slower and you can be assured that trying to install any S3 rom on them is doomed to failure...
. To check use antutu from the play store, you can check the specs and post back here
XDA may even have a forum for China SG3 .
jje
Click to expand...
Click to collapse
try to use Samsung codes like *#1234# or *#0*#
it is a fake after all because I only got 3803 benchmark score,and I think it should be smth like 15000 points
of course it is.

discovery V5,android 4.0.4 Z3Z6Z7 mtk6517

My phone model is discovery V5,android 4.0.4 Z3Z6Z7 mtk6517. with UnlockRoot When I press the root button on the interface it recognizes my phone as TSC Z3Z6Z7 4.0.4, when I choose it ; it says Attention! Failed to chmod file: /data/local/tmp. What should I do?
help me please
rooting
karamiilias said:
My phone model is discovery V5,android 4.0.4 Z3Z6Z7 mtk6517. with UnlockRoot When I press the root button on the interface it recognizes my phone as TSC Z3Z6Z7 4.0.4, when I choose it ; it says Attention! Failed to chmod file: /data/local/tmp. What should I do?
help me please
Click to expand...
Click to collapse
Hi, did you have any luck?
I'm running out of ideas.
AbuGWM5 said:
Hi, did you have any luck?
I'm running out of ideas.
Click to expand...
Click to collapse
no i still trying thancks for intresting :good::fingers-crossed::fingers-crossed:
Discovery V5
Hi, I've recently bee looking into getting this phone but am not sure if its worth getting due to the lack of ram. I am looking for a rugged phone on a budget for when I do 'out-doorsy' stuff. would anybody that owns the phone give me a quick review and a list of what it can and can't do and overall if it is worth getting (I know somewhere that I can get it for £67). thank you and if it is possible to root it this will be a big bonus.
Unrooteable???
karamiilias said:
My phone model is discovery V5,android 4.0.4 Z3Z6Z7 mtk6517. with UnlockRoot When I press the root button on the interface it recognizes my phone as TSC Z3Z6Z7 4.0.4, when I choose it ; it says Attention! Failed to chmod file: /data/local/tmp. What should I do?
help me please
Click to expand...
Click to collapse
I've the same phone... is it unrooteable? I need help too!!!
Yorsh said:
I've the same phone... is it unrooteable? I need help too!!!
Click to expand...
Click to collapse
If anyone know any mode for rooting this phone,please help!
Hardware : MT6575 (MT6517 is Fake!)
Model : Z3Z6Z7
Build number : Z3Z6Z7 20130106-121916
Build date UTC : 20130106-041916
Android v : 4.0.4
Baseband v: MAUI.11AMD.W11.50.SP.V19.F1.P, 2012/12/17 21:22
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Sun Jan 6 12:17:09 CST 2013
I don't know anymore what kind of cpu is in there.Before it was with sc8810,maybe they did an upgrade to some mtk cpu.Antutu benchmark is around 5200.
It's not ics,probably 2.3!
This works!
Hardware : MT6575 (MT6517 is Fake!)
Model : Z3Z6Z7
Build number : Z3Z6Z7 20130106-121916
Build date UTC : 20130106-041916
Android v : 4.0.4
Baseband v: MAUI.11AMD.W11.50.SP.V19.F1.P, 2012/12/17 21:22
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Sun Jan 6 12:17:09 CST 2013
Use this, it worked for me on this same model phone. Just run this program, then connect phone to PC with USB debugging enabled. You will then need to click the blue button in bottom right corner.
It will install a chinese language Superuser but simply install SuperSU or Superuser from Play Store and make sure you press the right hand button when the chinese superuser request pops up when you go to update the su binary in the english SuperSu or Superuser.
**After you have updated su binary in the english version of Superuser/SuperSU, then you can delete the chinese version and still keep root. After the su binary is updated root access control gets handed off to the english version.**
Hope this helps!
***EDIT*** You have google to find Vroot, cant post a link to it on XDA.
I found the solution
karamiilias said:
My phone model is discovery V5,android 4.0.4 Z3Z6Z7 mtk6517. with UnlockRoot When I press the root button on the interface it recognizes my phone as TSC Z3Z6Z7 4.0.4, when I choose it ; it says Attention! Failed to chmod file: /data/local/tmp. What should I do?
help me please
Click to expand...
Click to collapse
Hello,
I bought the same phone and I have the same problem, but I solved with this method root.
There I leave the solution is in Spanish but you can translate easily.. I can not let the link be new, but Google's blog search Sitesirvedealgo.com
Need your help
Klown80 said:
Hardware : MT6575 (MT6517 is Fake!)
Model : Z3Z6Z7
Build number : Z3Z6Z7 20130106-121916
Build date UTC : 20130106-041916
Android v : 4.0.4
Baseband v: MAUI.11AMD.W11.50.SP.V19.F1.P, 2012/12/17 21:22
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Sun Jan 6 12:17:09 CST 2013
Click to expand...
Click to collapse
Bro, can u help me with HCL ME tab?
Look my thread here ::- http://forum.xda-developers.com/showthread.php?t=2365636&highlight=hcl+me+connect+2g
ajay131 said:
Bro, can u help me with HCL ME tab?
Look my thread here ::- http://forum.xda-developers.com/showthread.php?t=2365636&highlight=hcl+me+connect+2g
Click to expand...
Click to collapse
Hi,
Off top of my head, did you try the Chinese root program I posted above? If that don't work I would say to try Root by Restore next and if that don't work either, try motochopper.
Let me know if any of the 3 methods work. If it had a MT65xx processor I know another method but you would need to install antutu and it will tell you all device specific information we need.
Klown80 said:
Hi,
Off top of my head, did you try the Chinese root program I posted above? If that don't work I would say to try Root by Restore next and if that don't work either, try motochopper.
Let me know if any of the 3 methods work. If it had a MT65xx processor I know another method but you would need to install antutu and it will tell you all device specific information we need.
Click to expand...
Click to collapse
ok. I will let you know afterwards. Feeling sleepy now. Will try tomorrow morning & then tell you.
Thanx for the reply
Bluetooth
Klown80 said:
Hardware : MT6575 (MT6517 is Fake!)
Model : Z3Z6Z7
Build number : Z3Z6Z7 20130106-121916
Build date UTC : 20130106-041916
Android v : 4.0.4
Baseband v: MAUI.11AMD.W11.50.SP.V19.F1.P, 2012/12/17 21:22
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Sun Jan 6 12:17:09 CST 2013
Use this, it worked for me on this same model phone. Just run this program, then connect phone to PC with USB debugging enabled. You will then need to click the blue button in bottom right corner.
It will install a chinese language Superuser but simply install SuperSU or Superuser from Play Store and make sure you press the right hand button when the chinese superuser request pops up when you go to update the su binary in the english SuperSu or Superuser.
Hope this helps!
Click to expand...
Click to collapse
I too used this solution and installed the English Superuser along with the chinese version above and it worked like a charm. Dont forget to keep both versions to maintain root.
Ricdesan said:
I too used this solution and installed the English Superuser along with the chinese version above and it worked like a charm. Dont forget to keep both versions to maintain root.
Click to expand...
Click to collapse
Not true! You do not need to keep the chinese version, once you install English Superuser or SuperSU and use chinese "superuser" to grant access to english version so it can update its own binary you are free to remove the chinese version. That is first thing I did so I know it works, just make sure you grant access with chinese app when updating su binary in english version, after updating english binary you pretty much hand off control of root access to the english version.
Root and Bluetooth
Klown80 said:
Not true! You do not need to keep the chinese version, once you install English Superuser or SuperSU and use chinese "superuser" to grant access to english version so it can update its own binary you are free to remove the chinese version. That is first thing I did so I know it works, just make sure you grant access with chinese app when updating su binary in english version, after updating english binary you pretty much hand off control of root access to the english version.
Click to expand...
Click to collapse
Perhaps I didnt grant access right the first time I installed ROOT´óʦ as I had to reinstall it when I went to change something and was prompted that I didnt have the system rooted. I just reinstalled and left it there not knowing better. I love this phone and its perfect so far except bluetooth that I cant get to pair with my hands free system in my 2012 Subaru Forester. Have you had any issues with bluetooth?
Ricdesan said:
Perhaps I didnt grant access right the first time I installed ROOT´óʦ as I had to reinstall it when I went to change something and was prompted that I didnt have the system rooted. I just reinstalled and left it there not knowing better. I love this phone and its perfect so far except bluetooth that I cant get to pair with my hands free system in my 2012 Subaru Forester. Have you had any issues with bluetooth?
Click to expand...
Click to collapse
Sorry I dont have the phone anymore, I got it just to figure out how to root it, my brother had one and could not get root for the life of him so I stepped in to help!
Many Thanks
Klown80 said:
Sorry I dont have the phone anymore, I got it just to figure out how to root it, my brother had one and could not get root for the life of him so I stepped in to help!
Click to expand...
Click to collapse
Well Klown80, you are awesome to have helped us that own and are fans of this phone. It is the ONLY sub $150 rugged smartphone made and is worth the time to set-up if you want a rugged smart phone on the cheap.
Ricdesan said:
Well Klown80, you are awesome to have helped us that own and are fans of this phone. It is the ONLY sub $150 rugged smartphone made and is worth the time to set-up if you want a rugged smart phone on the cheap.
Click to expand...
Click to collapse
Thank you, I am glad I could help. I like to tackle these lesser known phones, I cant hold a candle to the skills of the really well known guys on here, but I try to do my part still I do still have the stock back up made with MTK droid Tools (thank Rua1 for his awesome tool, it comes in handy for these MediaTek devices), I would recommend you download the tool and back up your own phone at least 3 times, it is good to have in case you mess up phone playing with root. Since this is an almost unknown device it is quite hard to find the firmware files for it, I searched the internet looking for a site to get firmware for this phone and found nothing so in short, to be safe, I would REALLY recommend making a few back ups with MTK Droid Tools, worst case I have a prerooted version saved on my PC, if you ever need it let me know.
http://forum.xda-developers.com/showthread.php?t=2160490
thanks
Klown80 said:
Hardware : MT6575 (MT6517 is Fake!)
Model : Z3Z6Z7
Build number : Z3Z6Z7 20130106-121916
Build date UTC : 20130106-041916
Android v : 4.0.4
Baseband v: MAUI.11AMD.W11.50.SP.V19.F1.P, 2012/12/17 21:22
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Sun Jan 6 12:17:09 CST 2013
Use this, it worked for me on this same model phone. Just run this program, then connect phone to PC with USB debugging enabled. You will then need to click the blue button in bottom right corner.
It will install a chinese language Superuser but simply install SuperSU or Superuser from Play Store and make sure you press the right hand button when the chinese superuser request pops up when you go to update the su binary in the english SuperSu or Superuser.
**After you have updated su binary in the english version of Superuser/SuperSU, then you can delete the chinese version and still keep root. After the su binary is updated root access control gets handed off to the english version.**
Hope this helps!
Click to expand...
Click to collapse
ohhh God!! you saved me..after many days trying, with this information i finally rooted my s4 clone. love uuu
Ricdesan said:
Perhaps I didnt grant access right the first time I installed ROOT´óʦ as I had to reinstall it when I went to change something and was prompted that I didnt have the system rooted. I just reinstalled and left it there not knowing better. I love this phone and its perfect so far except bluetooth that I cant get to pair with my hands free system in my 2012 Subaru Forester. Have you had any issues with bluetooth?
Click to expand...
Click to collapse
yes, bluetooth on this device is a *****. i wanted to pair it with my phone and it kept returning error. i had to try about 10 times. i got it paired by pairing with my x8 and accepting on the discovery...
S4 clone MTK6575 Recorvery mode failed
Hello,
I have got a S4 samsung (fake) I9500 (one sim)
Android 4.2.2
Baseband: MAUI.11AMD.W11.50.SP.V37,2013/06/19 15:44
Kernel version: 2.6.35.7 1311 V12 Fri Jul 5 17:42 CST2013
Compilation number JDQ39.I9500ZHUAMDE
Compilation version 1373015782
I have tried to root it with your explanations here but I got a "temporary rooted" message.
Droid tools says that software does not correspond to the hardware.
And when I try to enter the recovery mode I can't select the options (I attach an image)
Could you please help?
Thank you very much in advance.

[Q] Galaxy S3 clone. Please help a newbie who's willing to learn

Hey guys,
This is my 1st post here ever.
The only time I fiddled around with rooting an android phone was more than a year ago when I had an AT&T Samsung infuse. I followed very detailed instructions on how to root it and upgrade it. It worked like a charm and I'm so grateful to all of you experts trying to help newbies.
A friend of mine went to China last month and brought me a Samsung s3 clone.
The phone is factory unlocked BUT
1. It doesn't have the original google play application. It has a similar logo which leads to a Chinese app store.
2. Google mail account application is missing
3. The phone supports only Chinese, Korean and English languages. (I'd like to use it in different ones)
So I need to re-install a good Android version that has all the Android features that I'm missing
I thought it would be easy to find instructions on how to do it it here, but unfortunately I wasn't lucky to find a direct and clear step -by step instructions for my phone model
Phone: Samsung Galaxy S3 GT-i9300
Model #: mtk6515_ics2
Android version: 4.0.4
Base band version: MAUI.11AMD.W12.22.SP.V14
Kernel Version: 3.0.13
[email protected]#1
Build Number: ALPS.ICS2.MP.V1.18
Custom Build Version: V15.12
Please help!
Is there anybody out there?
Is there anybody out there? :crying:
Hey man,
unfortunately I don't think anyone can help you rooting/changing roms as it's a replica and there isn't a real development for it.
BUT as for the play store you can DL the apk directly from here:
http://www.androidpolice.com/2013/05/14/download-latest-google-play-store-4-1-6/
As for the phone language, after installing the google play store look for:
https://play.google.com/store/apps/details?id=jp.co.c_lis.ccl.morelocale&hl=en
and choose the language of your wishing. That is in case that your phone supports it.
If you mean by google mail account the gmail app then in that case:
http://www.androidpolice.com/2013/0...ith-slide-out-navigation-and-brand-new-inbox/
BTW for future references - try to make a search for yourself I'm sure you could've find those in less than a minute
Cheers.
Thanx
Thanx a lot for your effort and concern.
I downloaded the latest google play apk, I installed it, but it wasn't working apparently because "google login service" and "google services framework" were missing too!
So I downloaded them, but they needed to be installed in system/apps.
I downloaded "root explorer" which should help me accessing the system folder.
I copied&pasted the apps in system/apps but a message says "your phone should be rooted first in order to paste" came out.
So back to square1
On the other hand, I tried to disactivate some of the annoying Chinese applications that came with the system using "root app delete", and guess what?
I get the same message that I should root this phone first.
So how can I root this bloody thing???
Yeah that is sounds pretty frustraing..Well I guess you won't find here a "how to root s3 replica" guide and personally I wouldn't try and rooting the device as it could easily brick it.
I suggest you go to the store and tell them that you've got a phone with no option to download apps, or connect to your Google account...
Hope you'll sort things up with the store soon
eytan123 said:
Yeah that is sounds pretty frustraing..Well I guess you won't find here a "how to root s3 replica" guide and personally I wouldn't try and rooting the device as it could easily brick it.
I suggest you go to the store and tell them that you've got a phone with no option to download apps, or connect to your Google account...
Hope you'll sort things up with the store soon
Click to expand...
Click to collapse
I wish I could follow your advise. The shop is 4000 miles away in China.
There is a google store app installed, but it's fake. It has a similar icon but with different proportions. The problem is that it's in Chinese and it deals with chinese applications.
Oh that is unreachable, but maybe can you contact them via Email etc..?
Anyways I found this thread I think you'll see it much more beneficial than my help as I don't have experience on rooting replicas and it's focused on your device:
http://forum.xda-developers.com/showthread.php?t=1921178
eytan123 said:
Oh that is unreachable, but maybe can you contact them via Email etc..?
Anyways I found this thread I think you'll see it much more beneficial than my help as I don't have experience on rooting replicas and it's focused on your device:
http://forum.xda-developers.com/showthread.php?t=1921178
Click to expand...
Click to collapse
thanx,
This method is for i9300 mtk6575
Will it work on my phone which is i9300 mtk6515_ics2?
What are my chances to brick the phone if I follow this procedure?
festerzio said:
thanx,
This method is for i9300 mtk6575
Will it work on my phone which is i9300 mtk6515_ics2?
What are my chances to brick the phone if I follow this procedure?
Click to expand...
Click to collapse
If you flash recovery from different device, there's a big chance you brick it
Try to use MTKDroidTools to root it, its pretty safe.
As @lolet said correct, you can possibly brick your phone...
That's why I advise you to ask in the thread I've linked onto, there are fellows there with much more experience than myself with rooting your device.
I guess in the last couple of years I've flashed hundreds of times but only on samsung, htc and motorolas.
Cheers
Good time. Please help find the firmware on clone I9300. For many drivers pumped and can not find adequately to my I9300. Lays bricks. All who have tried to upload the firmware through Flush Toole an error S_DL_GET_DRAM_SETTING_FAIL (5054) do not know where to find them. Here is a description of TA
model
I9300 1:01
network
Dual sim card
An unlocked 2G GSM 800/850/1800/1900MHz
Processor (CPU)
MTK 6575 1.0GHz
operating system
Android 4.0.4
RAM
512
ROM
* Support TF card up to 32GB
screen
4.7 inch Touch Screen Resolution: HD AMOLED, 800 * 480Pixels
camera
Front 1.3 / Rear 8MP with Flash Light, Support Video record
wireless
WiFi 802.11b / g, GPRS/EDGE/3G, Bluetooth 2.1, FM-radio
GPS
Integrated GPS-Navigation + AGPS
TV
No.
sensor
G-sensor, light sensor, proximity sensor, motion sensor
clone GT-9300-Microsim second one is the usual Sim, OS 4.04, kernel version 3.0.13, lxq @ server0-br # 1 Thu Mar 14 11:53:11 GST 2013 build number ALPS.ICS2.MP.V1.18 , Custom build version v19.01
photos of the phone attached
zver16 said:
Good time. Please help find the firmware on clone I9300. For many drivers pumped and can not find adequately to my I9300. Lays bricks. All who have tried to upload the firmware through Flush Toole an error S_DL_GET_DRAM_SETTING_FAIL (5054) do not know where to find them. Here is a description of TA
model
I9300 1:01
network
Dual sim card
An unlocked 2G GSM 800/850/1800/1900MHz
Processor (CPU)
MTK 6575 1.0GHz
operating system
Android 4.0.4
RAM
512
ROM
* Support TF card up to 32GB
screen
4.7 inch Touch Screen Resolution: HD AMOLED, 800 * 480Pixels
camera
Front 1.3 / Rear 8MP with Flash Light, Support Video record
wireless
WiFi 802.11b / g, GPRS/EDGE/3G, Bluetooth 2.1, FM-radio
GPS
Integrated GPS-Navigation + AGPS
TV
No.
sensor
G-sensor, light sensor, proximity sensor, motion sensor
clone GT-9300-Microsim second one is the usual Sim, OS 4.04, kernel version 3.0.13, lxq @ server0-br # 1 Thu Mar 14 11:53:11 GST 2013 build number ALPS.ICS2.MP.V1.18 , Custom build version v19.01
photos of the phone attached
Click to expand...
Click to collapse
please this firmware link ,,,

[Q] Goophone i6 - 6582 Quad - Aluminium- touch screen issue

Hello,
I have a problem with the goophone i6 . I decided to reinstall the rom and after flashing roms to reloads (I tried a few / several) - but there is a problem with touch screen - for each new ROM touch screen crazy (something like in this link - youtube.com/watch?v=fflpQZX55M8 - attach a link to the cpu-z ( images70.fotosik.pl/785/bdb924969c415752.jpg )
I restored my rom from a backup ( CWM ) and the problem also appeared (if you think that not everything is removed from memory and a file kernel / driver remains?)
Do you think that the problem can cause the kernel ??
now MTK droid root & tools shows me
kernel v: 3.4.5-447903 ([email protected]) (gcc version 4.6.x-google 20,120,106 (prelelase) (GCC) # 1 SMP Tue Oct 14, 2014 4:07:41 p.m. CT
Previously I had:
3.4.5 kernel (eng.wangsongsong.1414117532)
images70.fotosik.pl/785/bdb924969c415752.jpg
Is the fault of the display driver?
Have you any ideas?
UP
Might be kernel problem, can you ask seller for rom?
dev.nul01 said:
Might be kernel problem, can you ask seller for rom?
Click to expand...
Click to collapse
yes, I got a rom from the seller but I suspect that he does not know because he sent me an official rom goophone which reacts in the same way .
I have the iPhone 6 goophone mtk6582 metal back. I am getting a bootloop when charged and when i press the hol n the back between th camera the screen is on but black. I have tried everything with sp tools. i cant even get that program to run, i plug it in and nothing happens. i tried mtk tools and this is how got into the problem i have, i think i flashed the boot and the recovery img. please can someone help me out. i have skype and teamveiwer so you can see if i am doing anything wrong. i was trying to flash the kitkat 4.2.2 but really i would just like it to work again. thanks in advace

Categories

Resources