hey guys,
My questions is regarding the fast/auto app install on titanium backup, some time ago after flashing a new ROM the Hypershell stopped working, i change ROM quite abit and cant remember which rom (if it was a rom that caused it) it was when the problem started, no matter what i do or which rom i put on my phone i still get the "Fast/Auto app install, NO(Hypershell needed)".
I have unistalled/reinstalled Titanium Backup app, the TB Pro key, Superuser app, Busybox, done wipes, flashed new and different roms but it is always the same, i assumed if i was missing something, a new rom with full wipe would sort it , but i'm obviously wrong, i am obviously missing something but i dont know what, if any of you guys could help it would be much appreciated.
Thanks
SGS3 I9300
Android: 4.2.1
Build: JOP40D.I9300XXUFMB3
BUMP*
gavmac said:
hey guys,
My questions is regarding the fast/auto app install on titanium backup, some time ago after flashing a new ROM the Hypershell stopped working, i change ROM quite abit and cant remember which rom (if it was a rom that caused it) it was when the problem started, no matter what i do or which rom i put on my phone i still get the "Fast/Auto app install, NO(Hypershell needed)".
I have unistalled/reinstalled Titanium Backup app, the TB Pro key, Superuser app, Busybox, done wipes, flashed new and different roms but it is always the same, i assumed if i was missing something, a new rom with full wipe would sort it , but i'm obviously wrong, i am obviously missing something but i dont know what, if any of you guys could help it would be much appreciated.
Thanks
SGS3 I9300
Android: 4.2.1
Build: JOP40D.I9300XXUFMB3
Click to expand...
Click to collapse
Come on someone must have an answer for me.
i had the same problem with another app,
you can check to another sd card ,partition the card ,install the rom ,and install the app,if it work then you must copy your filew of your basic card to the pc,format your card ,partition your card with the "MiniTool Partition Wizard Home Edition",paste your files and thats it .
i hope to work it,
it 's work to me
For anyone suffering from this issue and finding this thread, I'd figured out what to do (once ensuring I have the Pro Key installed properly) go into TB's "Menu->Preferences->App processing mode" and (re-)select "Auto, Direct". Then restart TB, and you're all set!
I think that what happened is I'd tried running TB w/o the ProKey installed and it reset that setting. Since TB saves to your SD Card, it doesn't usually get wiped on a reset, so it'd picked up the old, non-ProKey setting (my TB said "Hypershell YES" and "Fast App install NO (need Hypershell)".
kcrudup said:
For anyone suffering from this issue and finding this thread, I'd figured out what to do (once ensuring I have the Pro Key installed properly) go into TB's "Menu->Preferences->App processing mode" and (re-)select "Auto, Direct". Then restart TB, and you're all set!
I think that what happened is I'd tried running TB w/o the ProKey installed and it reset that setting. Since TB saves to your SD Card, it doesn't usually get wiped on a reset, so it'd picked up the old, non-ProKey setting (my TB said "Hypershell YES" and "Fast App install NO (need Hypershell)".
Click to expand...
Click to collapse
jesus christ thank you. ive been searching for months to get this to work...in the end this is so easy..
:good:
kcrudup said:
For anyone suffering from this issue and finding this thread, I'd figured out what to do (once ensuring I have the Pro Key installed properly) go into TB's "Menu->Preferences->App processing mode" and (re-)select "Auto, Direct". Then restart TB, and you're all set!
I think that what happened is I'd tried running TB w/o the ProKey installed and it reset that setting. Since TB saves to your SD Card, it doesn't usually get wiped on a reset, so it'd picked up the old, non-ProKey setting (my TB said "Hypershell YES" and "Fast App install NO (need Hypershell)".
Click to expand...
Click to collapse
Thank you very much man. it really helped me.
I could not get into that ">App processing mode" setting so I uninstalled the pro key and then reinstalled. TiBu force closed but when I reopened it I had Fast/Auto enabled again.
Hi. I cannot find App Processing Mode in preferences. Do I need the PRO version for Titanium Backup to work properly?
Thank you,
LoriAnn
its pro version feature.
Regionella said:
its pro version feature.
Click to expand...
Click to collapse
I had problem with pro so that's not it. From the last time I fixed it once it was a settings issue I believe....Don't quote me tho.
Related
Picked up a Vibrant a few days ago, but Im having some issue restoring my apps using Titanium backup 3.3.2.
I having an issue where Titanium Backup says its restoring, but just sits there doing nothing. Somehow Ive managed to get it to restore once, but I had to wipe and now I cant get it to restore for the life of me. Tried w/ original busybox and the one that downloads inside titanium, both w/o success. Seems that titanium has some sort of issue w/ the Galaxy S.
Has anyone found a solution that allows you to restore your apps? Thanks!
EDIT: Whats really strange is if I try to hide titanium, relaunch it, and try and backup. It gives the message "backup already in progress" but for whatever reason it moves onto the next app...so strange
EDIT2: FIXED IT thanks to Joel, the awesome dev behinf titanium. Go into options and change the install method to "AUTO, Indirect" and it should work. Hope this helps others!
AWESOME!!! Thanks!
I also think Joel has one of the best apps for android. Great support and Dev.
I need a little kind help runing this.
When I press any of the batch RUNs I just go back to the previous screen.
I have the latest version, busybox install, rooted.
I can backup individual files, but nothing from the BATCH screen works.
granduke said:
I need a little kind help runing this.
When I press any of the batch RUNs I just go back to the previous screen.
I have the latest version, busybox install, rooted.
I can backup individual files, but nothing from the BATCH screen works.
Click to expand...
Click to collapse
open TB and before doing anything click the menu key.
Now click Preferences, App Installer Mode and change that to Auto INDIRECT, by default it will use Auto, Direct.
Now try to run a batch restore
rsfaze said:
open TB ....
Click to expand...
Click to collapse
Still nothing, when I press RUN I just go back to the Backup/Restore screen.
Should I then be looking for a GO or LAUNCH button?
This same thing happens on my G1, so it must be an evident stupid mistake I'm making, but I can't figure out what.
granduke said:
Still nothing, when I press RUN I just go back to the Backup/Restore screen.
Should I then be looking for a GO or LAUNCH button?
This same thing happens on my G1, so it must be an evident stupid mistake I'm making, but I can't figure out what.
Click to expand...
Click to collapse
If your on the Vibrant now. you would once you open TB, push the soft key all the way to the left and a menu will come up.
Go into preferences from here.
Ah. had a bad install of Ti Backup.
Reinstalled and works as ordered now.
thanks.
granduke said:
Appreciate your patience and assistance here.
Yes, I've gone to Preferences and made the change your suggested. This is not my problem.
I can not run any batch commands. I can not backup/restore/verify or any of the other choices.
When I press any of the RUN options, I drop back to the Backup/Restore screen and nothing happens.
Click to expand...
Click to collapse
ah sorry I misunderstood.
Couple questions.
Does the backup/restore batch commands your running show a number to the right indicating how many apps are being restored/backed up?
TB should request Super User permissions when it first launches, but to make sure open Super User and make sure you see TB in the list of allowed applications.
Thanks for your help. Everything works fine now.
See my previous edited post.
Don't recall ever having to reinstall a faulty app before. Still it is something I should have checked earlier.
Since the OPs problem has been sorted, I hope its Ok that I post a problem.
I wanted to do a factory reset to see if it would improve some performance issues.
- DLed Ti
- menu > batch > run "backup all user apps and sys data" > select all > run (all items under backup/restore tab had check, smilie, or smilie with M)
- factory reset
- installed Ti
- menu > batch > run "restore all apps and data" > select all > run
- clicked "install" for each downloaded app (is this normal or should it be automatic?) data was reinstalled automatically
- rebooted
All downloaded apps were restored and settings were restored.
market dl history was not restored, system user data was not restored (browser bookmarks, text, call log etc)
- opened Ti
- menu > batch > run "restore missing apps and all sys data" > select all > run
- reboot
market links are now restored but still no texts, call log, browser bookmarks, wifi keys, bluetooth pairings etc.
I'm great full that Ti made restoring apps so much easier but I know it can restore all sys user data as well. What did miss or do wrong?
Ok so I have an issue where i was flashing the ROM Tranquility for my droid x and it was difficult to get it running but now it seems to be going ok. But now I'm trying to restore all my apps using Titanium and for some reason as soon as i try to restore even one, the phone quick reboots. PLEASE HELP, becuz i have a TON of apps that i just dont really wanna go reinstall every single one
ldemon360 said:
Ok so I have an issue where i was flashing the ROM Tranquility for my droid x and it was difficult to get it running but now it seems to be going ok. But now I'm trying to restore all my apps using Titanium and for some reason as soon as i try to restore even one, the phone quick reboots. PLEASE HELP, becuz i have a TON of apps that i just dont really wanna go reinstall every single one
Click to expand...
Click to collapse
So why are you posting it in the vibrant subforum? I recommend posting this as a new thread in the droid x, q and a section. Since we're on the wrong carrier with a different device.
Sent from my SGH-T959 using XDA App
I have a problem where I backed up all of my data, verified it successfully then installed the latest Continuum 5.5(updated from 5.4.1) and then tried to restore my system data(Contacts, SMS, etc.) but after the reboot, none of these show up?
If it verified without any errors then how could it just suddenly not show up?
Brilliant, I am glad this post is around because I was having the hardest time trying to figure this one out. Thanks for the info!!
zimphishmonger said:
Picked up a Vibrant a few days ago, but Im having some issue restoring my apps using Titanium backup 3.3.2.
I having an issue where Titanium Backup says its restoring, but just sits there doing nothing. Somehow Ive managed to get it to restore once, but I had to wipe and now I cant get it to restore for the life of me. Tried w/ original busybox and the one that downloads inside titanium, both w/o success. Seems that titanium has some sort of issue w/ the Galaxy S.
Has anyone found a solution that allows you to restore your apps? Thanks!
EDIT: Whats really strange is if I try to hide titanium, relaunch it, and try and backup. It gives the message "backup already in progress" but for whatever reason it moves onto the next app...so strange
EDIT2: FIXED IT thanks to Joel, the awesome dev behinf titanium. Go into options and change the install method to "AUTO, Indirect" and it should work. Hope this helps others!
Click to expand...
Click to collapse
This just helped me with restoring my HTC Sensation! Google is awesome, lol.
"AUTO, Indirect"
didn't do any good...
I'm up to try regular android restore, but will take ages...
I don't see this option "AUTO, indirect" in TitaniumBackup 4.4.0 version, but I have same problem here.
Finally found that "indirect mode". Works great now, thanks !!!!
RaptorHawk said:
I don't see this option "AUTO, indirect" in TitaniumBackup 4.4.0 version, but I have same problem here.
Click to expand...
Click to collapse
The option is in preferences>app processing mode. (the second last option)
I have a problem with some restored apps such as Gmail. If I restore app and data the app won't sync properly. It will delete the emails but they still show in unread and when I load Gmail on the PC the emails are still there.
I have found numerous apps to do this.
Has anyone encountered it and solved it? I've tried everything including indirect but all I can do is reinstall the apps and set them up again.
Sent from my GT-5660 using xda app-developers app
I have always used ROM Manager to do everything, but seeing that might not be the best way to do things..I have been having some other problems with restoring, and talked about it on another forum, but can't post the link here yet.
So, my nightlys said it is time to upgrade, so I am going to completely back everything up with TB, and fire it all up to dropbox. All of my system settings are 100% the way I want them... I also clicked the beta migration option in the preferences, hoping that would help me.
Step 1 - Backup all user apps + system Data
Step 2 - Sync to Dropbox
Step 3 - Boot into Clockwork Mod Recovery, and do everything manually, not through ROM Manager
Step 4 - Clear cache and Dalvik
Step 5 - Run zip from SD Card
This time, it seemed like everything went as planned. When I started the phone back up, all the apps were in the same spot, and wallpaper was the same. Although, the first time, when the screen timed out, I couldn't turn it back on. Pulled the battery, and all is working fine now.
Step 6- went into TB and did a batch restore of all apps and data, but only clicked the green items. From reading somewhere else, it is only wise to do the green items, not the red, so that is what I did. Then reboot for all to take effect.
This is where I am confused. None of my data is restored. For example, I use K-9 Mail, and the settings aren't restored by the batch. But, if I go to that app, and hit the restore data, then it restores it fine. So, for me to do all my apps, the batch function isn't working, I have to go through and do 15-20 apps manually.
So, what am I doing wrong here? Why isn't the batch operation working properly for me?
Edit - Something else I noticed that didn't restore properly was any of my ring tones. Not a huge deal, but I thought might be worth mentioning in this dilemma.
So I assume you are on CM7 as you refer to nightlies.
You say that you wipe cache/dalvick cache and install. Then when you reboot all your apps are in the right place?
Then why on earth would you want restore your apps on top of the existing apps with TB? Maybe that is causing the problem. AFAIK upgrading with a nightly shouldn't touch your installed apps.
Did you check the app settings before restoring with TB?
As for the ringtones, I always had that problem when using CM7, just got used to fixing them after installing each nightly.
Hope this helps.
What version of TB are you using? I was having a similar problem doing restores on v3.9.0.1 and was having problems doing batch recovery with my SGS2. The status bar would come up but wouldn't successfully finish. I then upgraded to 4.0.0.0 and everything seems to work.. might give that a try if you're using an older version.
killall said:
So I assume you are on CM7 as you refer to nightlies.
You say that you wipe cache/dalvick cache and install. Then when you reboot all your apps are in the right place?
Then why on earth would you want restore your apps on top of the existing apps with TB? Maybe that is causing the problem. AFAIK upgrading with a nightly shouldn't touch your installed apps.
Did you check the app settings before restoring with TB?
As for the ringtones, I always had that problem when using CM7, just got used to fixing them after installing each nightly.
Hope this helps.
Click to expand...
Click to collapse
Yes, sorry, I am running CM7, but using the nighties.
As far as the apps, that's why I think I am doing something wrong. Last time was the first time everything was there, every other update, it was like I was starting off with a new phone. No app, no data, nothing. A brand new fresh start.
I will try it again in a few minutes and hope for the best..
Thanks for helping out with this one..
bringit8 said:
What version of TB are you using? I was having a similar problem doing restores on v3.9.0.1 and was having problems doing batch recovery with my SGS2. The status bar would come up but wouldn't successfully finish. I then upgraded to 4.0.0.0 and everything seems to work.. might give that a try if you're using an older version.
Click to expand...
Click to collapse
I am currently using the Pro, 4.0.2. It just seems that I have to refresh all the data for each app by themselves, but all at once won't work.
Upgrading my nightly now, so keeping my fingers crossed that it will work.
Hey all, apologies in advance if this Q is answered somewhere. After searching XDA and Google and trying to avoid posting something new, I resorted to posting.
Running Shostock 2, and I have two issues with TiBu. The first one has existed for all versions of Shockstock2 I've run, and the second one is brand new.
1) TiBu is unable to restore apps, only data. I've tried the different App Processing Modes (as is often suggested), to no avail. This is a smallish problem because it enables me to sort through the apps I really want, but I'd rather just do it in TiBu than going through market installs and then TiBu for data. Any ideas of what might be amiss?
2) New in Shostock 4.1.1 - Whenever any sort of backup occurs, many many apps and processes FC over and over (including Apex). Closing and reopening, clearing RAM, etc., don't help. The only solution I've found is restarting. Is this a bad install of Shostock, TiBu, or something I should just expect?
Thanks!
Never restore system apps
Never restore ALL apps
Only use the batch restore missing apps
Sent from my Nexus 7 using Tapatalk 2
I am also running ShoStock2 and TiBu and do not have any problems. I can backup and batch restore non-system apps with no problem. As pirate already mentioned, never use TiBu for system apps.
What i usually do before installing any new ROM is to delete all my TiBu backups and do them again fresh. Have you noticed off the FCs occurs always at the same point in the restore process? It might mean a problem with a particular app.
Pirateghost said:
Never restore system apps
Never restore ALL apps
Only use the batch restore missing apps
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Yup yup. I only do user apps, never system apps.
wgoldfarb said:
I am also running ShoStock2 and TiBu and do not have any problems. I can backup and batch restore non-system apps with no problem. As pirate already mentioned, never use TiBu for system apps.
What i usually do before installing any new ROM is to delete all my TiBu backups and do them again fresh. Have you noticed off the FCs occurs always at the same point in the restore process? It might mean a problem with a particular app.
Click to expand...
Click to collapse
Not restore, but the actual backup process. The TiBu backup runs (changing App Processing Mode allowed it to run without TiBu hanging), then if I interact with the phone any time after the batch backup has begun (including after the process ends), the FCs come fast and furious.
Pirateghost said:
Never restore system apps
Never restore ALL apps
Only use the batch restore missing apps
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
May I ask why never restore system apps?
I currently switched from 2.3.6 coz to shostock and used system apps restore to pretty much replicate my everything to shostock.
Does it cause a bug somewhere or somethin?
Megiddo2000 said:
May I ask why never restore system apps?
I currently switched from 2.3.6 coz to shostock and used system apps restore to pretty much replicate my everything to shostock.
Does it cause a bug somewhere or somethin?
Click to expand...
Click to collapse
Some system apps can be restored safely, and others can not. If you are changing base, such as you did when you installed Shostock2 from UCKK6, then many of the system apps will be different. If you installed all system apps with data, your phone would probably not even boot fully, and at the least would constantly have force closes and/or freezes and other problems on almost everything. It is usually safe to restore apps like email, Gmail, memo, Google+, etc. but when I do, I always do only one app at a time.
If you ever have fc's, freezes, or other problems, then you should reinstall and restore more carefully.
A little update, since it looks like nobody has any ideas...The FC problem occurs when any app uses super use privileges. And the problem seems to be getting worse - randomly happening even when there is no apparent reason it should. Is it possible that the install of Shostock simply didn't take and I should try again? Thanks.
The FCs happen because when you restore system apps with a backup that was made on a different ROM base many of them will no longer be compatible. You never, EVER restore system apps unless you are doing so to the same ROM that you originally made the backup on. Your phone may appear to be OK, but nagging FCs will continue to happen with no apparent reason. Your only solution at this point is a reflashing of the ROM from scratch as there is no way to fix what you've done.
Miami_Son said:
The FCs happen because when you restore system apps with a backup that was made on a different ROM base many of them will no longer be compatible. You never, EVER restore system apps unless you are doing so to the same ROM that you originally made the backup on.
Click to expand...
Click to collapse
You're joking, right? Did you even read the thread or just start typing after skimming the first line? I mean, it's only 6 posts...
Your phone may appear to be OK, but nagging FCs will continue to happen with no apparent reason. Your only solution at this point is a reflashing of the ROM from scratch as there is no way to fix what you've done.
Click to expand...
Click to collapse
TiBu's most recent update mentions fixing issues with batch jobs. I wonder if that was my issue.
Anyway, given the lack of knowledge on this front, I went ahead and wiped everything, flashed Shostock2 4.1.3, had the same FC issues, wiped, wiped, flashed, wiped, wiped, flashed, rebooted several times. It's now good, but still a puzzling issue. Still, there's no good explanation yet of where these FCs came from.
vijtable said:
You're joking, right? Did you even read the thread or just start typing after skimming the first line? I mean, it's only 6 posts...
Click to expand...
Click to collapse
Well, genius, my response was to the guy asking why not to restore system apps with TiBu. Did you even read that? I guess I should have quoted him so that you would have no reason to make a snarky reply to someone trying to help others, but what do I know?
Titanium Backup USB Debugging
Idk why I keep getting this message "Your system settings may cause problems. To correct this, go to your phone's settings, then in "Applications" then in "Development" and tick the "USB debugging" checkbox. I already tick it but it still have the message. BTW I am on Pfittech rom and siyahkernel. Anyone know why?
darkmage17 said:
Idk why I keep getting this message "Your system settings may cause problems. To correct this, go to your phone's settings, then in "Applications" then in "Development" and tick the "USB debugging" checkbox. I already tick it but it still have the message. BTW I am on Pfittech rom and siyahkernel. Anyone know why?
Click to expand...
Click to collapse
An identical question was asked just a few days ago:
http://forum.xda-developers.com/showthread.php?p=30314962
EDIT: just as a friendly tip: you will usually get a lot more help in this forum if others can see you have made a genuine effort to search for answers to your problem before you post.
Upgraded to CM10. I did an SBF (2.3.4) wiped everything and installed CM10 Alpha 2 and GAPPS (jb-10121011). So far the only issue I have (other than know issues):
After getting CM10, GAPPS, Bootstrap Recovery installed, I used Titanium to restore most of my apps, but wanted to do a clean install on Flash Player. So went in found the apk using my file mgr, selected "install", went to what I call the Android Install screen with two buttons at the bottom (Cancel & Install), tried to select the Install, nothing happened. I do have "Unknown Sources" checked in Security. I have tried other apk's just to test and none seem to work. Tried to move the apk's to the SD0 card, and that had no effect either. I figure I am missing a setting somewhere, can anyone help?
Thanks in advance.
I havent had this issue and I dont know of anyone else with this issue. Thats weird. What happens when you press install? It just stays on that screen and doesnt proceed? Maybe just restart your phone and try again.
jsgraphicart said:
I havent had this issue and I dont know of anyone else with this issue. Thats weird. What happens when you press install? It just stays on that screen and doesnt proceed? Maybe just restart your phone and try again.
Click to expand...
Click to collapse
I did try a reboot and a power off, neither seem to work. I did use the new GAPPs when I did this CM10 install, so I even thought about going back and using the jb-20120726 gapps I had installed with my last CM 10 install, but figured the new ones were out for a reason and that may not be a good idea. So right now looks like the only way I can install anything is from Play Store. Even tried AppInstaller from Play Store and it did no better than the File Mgr.
Thasian483 said:
I did try a reboot and a power off, neither seem to work. I did use the new GAPPs when I did this CM10 install, so I even thought about going back and using the jb-20120726 gapps I had installed with my last CM 10 install, but figured the new ones were out for a reason and that may not be a good idea. So right now looks like the only way I can install anything is from Play Store. Even tried AppInstaller from Play Store and it did no better than the File Mgr.
Click to expand...
Click to collapse
I dont think the Gapps would have anything to do with it. Those are just google apps. The system handles the file installations. But who knows, maybe it does have something to do with it. I've just never heard of that issue before.
jsgraphicart said:
I dont think the Gapps would have anything to do with it. Those are just google apps. The system handles the file installations. But who knows, maybe it does have something to do with it. I've just never heard of that issue before.
Click to expand...
Click to collapse
Yeah after thinking about it think you are correct. This is based on the fact that I installed CM10, then the GAPPS, then installed the Bootstrap (CM7) which was an apk, so it worked then. After that I restored apps from Titanium and flashed a "softkey zip", so I am going to Nandroid back before the softkey flash and see what happens. If needed I will just start over.
Thanks for your thoughts
Thasian483 said:
Yeah after thinking about it think you are correct. This is based on the fact that I installed CM10, then the GAPPS, then installed the Bootstrap (CM7) which was an apk, so it worked then. After that I restored apps from Titanium and flashed a "softkey zip", so I am going to Nandroid back before the softkey flash and see what happens. If needed I will just start over.
Thanks for your thoughts
Click to expand...
Click to collapse
If you did install the bootstrap then something after that definitely messed with it. I wouldn't think its the soft key mod though because I also have that installed and I can still install apks.
jsgraphicart said:
If you did install the bootstrap then something after that definitely messed with it. I wouldn't think its the soft key mod though because I also have that installed and I can still install apks.
Click to expand...
Click to collapse
still not sure what happened, but somehow the SD Cards were swapped. The SD0 Card was my external card and the SD1 was the internal card. I discovered that just before I decided to to SBF and start over. I am back at CM10A2 and at this point everything looks good. Still not sure what happened, but I will not be using Titanium to restore apps this time.
again, thanks for you help
Thasian483 said:
still not sure what happened, but somehow the SD Cards were swapped. The SD0 Card was my external card and the SD1 was the internal card. I discovered that just before I decided to to SBF and start over. I am back at CM10A2 and at this point everything looks good. Still not sure what happened, but I will not be using Titanium to restore apps this time.
again, thanks for you help
Click to expand...
Click to collapse
How did you get the SD Cards swapped. Thats usually what people want. lol. And restoring apps with Titanium Backup isnt bad. I do it all the time. Im thinking you might have restored SYSTEM data. Which could explain why it set your SD Cards that way. Never restore system data. I find it not that hard to reset whatever system setting you had previously anyway.
jsgraphicart said:
How did you get the SD Cards swapped. Thats usually what people want. lol. And restoring apps with Titanium Backup isnt bad. I do it all the time. Im thinking you might have restored SYSTEM data. Which could explain why it set your SD Cards that way. Never restore system data. I find it not that hard to reset whatever system setting you had previously anyway.
Click to expand...
Click to collapse
didn't think I did a system data restore, I know that is VERY BAD when changing/upgrading ROMs, but who knows I may have hit a wrong button. Anyway it is working now and I am in the process of setting up the apps, which will probably wait until tomorrow since I have the basics all working.
thanks again for your help
All,
I am an idiot. Last weekend I rooted my Galaxy S2 and was really happy that everything worked well. Yesterday morning I removed some packages which I thought are not required using Titanium backup without making a backup of them before!
That was in fact a big mistake, what's now happening is that after system reboot a popup appears telling me:
process com.sec.android.socialhub was terminated unexpectedly and what's even worse when I start the stock email application (com.android.email) it is terminated, too.
I need that program to connect to my work, they check remotely what application is used.
So my question to you guys is:
how can I find out what I need to reinstall, where do I get it and how can I reinstall it?
Any hints are greatly appreciated, thanks a lot.
benny.2004 said:
All,
I am an idiot. Last weekend I rooted my Galaxy S2 and was really happy that everything worked well. Yesterday morning I removed some packages which I thought are not required using Titanium backup without making a backup of them before!
That was in fact a big mistake, what's now happening is that after system reboot a popup appears telling me:
process com.sec.android.socialhub was terminated unexpectedly and what's even worse when I start the stock email application (com.android.email) it is terminated, too.
I need that program to connect to my work, they check remotely what application is used.
So my question to you guys is:
how can I find out what I need to reinstall, where do I get it and how can I reinstall it?
Any hints are greatly appreciated, thanks a lot.
Click to expand...
Click to collapse
think it is worth to mention, Android version 2.3.3, base I9100BUKE1, kernel version 2.6.35.7-I9100BUKE2-CL188370 [email protected]#2, Build Gingerbread.BUKE2
If you make a factory reset you should have all back. make a backup of your existing apps first!
okty2k said:
If you make a factory reset you should have all back. make a backup of your existing apps first!
Click to expand...
Click to collapse
No, all the data is gone but the problem is still there. Obviously, not all the packages are reinstalled automatically after a factory reset. Is there a way of forcing that?
Please help, I am totally lost.
Unfortunately no as you have found out factory reset just deletes data for all applications but doesn't reinstall anything you may have deleted.
Only thing I can think of is to find a copy of the stock Rom you are on that matches your current version and flash that.
I assume you have an S2 based on the info you posted, try the link below and you should be able to find something that helps:
http://www.sammobile.com
Sent from my PACman GT-I9100 using xda premium