Hi my process of root and installation gone very bad. now my mobile does not power up by itself but only when its connected with PC via USB cable it flashes intermittently, please see the attached photo.
How it happens:
1. SG II was okay and functional so i entered into recovery mode and did wipe clean of data and then cache.
2. Entered into download mode and tried Odin and install custom Rom but there were few rejected attempt.
3. Odin was terminated and mobile battery removed to try again
4. It shown me "software update failed logo" plz see image i uploaded.
5. my phone still connectable with Odin, so i flashed it with "MyGKernelV1.1.1_CWM5.tar" as we found it in one forum to fix this error message.
6. Took battery out and this boot-loop stuck on my mobile. (See the first image uploaded, its kind of screen saver as this logo keep going on n off)
Odin 3 does not register it connected on my PC, i cannot enter into recovery or download mode.
Please, let me know if anyone got idea to fix it, will appreciate lot, as after 3-4 hours search through numerous forums and pages, i am frustrated.
Pictures uploaded to show my case are searched online to be close enough but they represent same problem.
Regards
Sunny
model:GT-I9100G
Baseband: I9100GZCLPK
Kernel:3.0.8-1067026
Build No: IMM76D.ZQLR7
That's forced download, get a stock ROM meant for your device and flash it via odin.
Now that I think about it the only thing I saw was the pic you posted so I dunno if your pc sees your device.
if it does, cool.
If it doesn't try another cable/port/pc/re install kies and on and on. Check the last page of the phistachio thread about unbricking, there's a lot of guys with that exact problem.
PS: I didn't want to edit it either so I kept typing. Crazy.
Sent from the little guy
Thanks mate, yep Odin doesnt not show it connect to PC so i got hard ball to play...i was fixing my mate's mobile and got kinda bad feeling that his mob bricked , he will be devastated if i cannot make it work...
...thanks again ...your words sounds nice to me and i will give it a go..
gastonw said:
That's forced download, get a stock ROM meant for your device and flash it via odin.
Now that I think about it the only thing I saw was the pic you posted so I dunno if your pc sees your device.
if it does, cool.
If it doesn't try another cable/port/pc/re install kies and on and on. Check the last page of the phistachio thread about unbricking, there's a lot of guys with that exact problem.
PS: I didn't want to edit it either so I kept typing. Crazy.
Sent from the little guy
Click to expand...
Click to collapse
sunnym_1999 said:
Thanks mate, yep Odin doesnt not show it connect to PC so i got hard ball to play...i was fixing my mate's mobile and got kinda bad feeling that his mob bricked , he will be devastated if i cannot make it work...
...thanks again ...your words sounds nice to me and i will give it a go..
Click to expand...
Click to collapse
Since it's showing you that forced download screen (it's the device's way to beg you to flash something because as it for now, nothing is working for it) I can tell you that is not THAT bricked just yet. You just need your pc to see it.
Try other Odin versions and make sure you get the right ROM for your device.
BTW, are you sure it's a I9100G device? did you check under the battery?
Before i started wiping and cleaning it, i made note of its model no, baseband etc ...so all that info is right.
Also, to give you better idea, this mobile current state is this one attached again..it keep flashing this screen info when connected with laptop otherwise it stays blank.
gastonw said:
Since it's showing you that forced download screen (it's the device's way to beg you to flash something because as it for now, nothing is working for it) I can tell you that is not THAT bricked just yet. You just need your pc to see it.
Try other Odin versions and make sure you get the right ROM for your device.
BTW, are you sure it's a I9100G device? did you check under the battery?
Click to expand...
Click to collapse
And it shows I9100G.
What happened with the other screen? Does it show up at all?
Sent from the little guy
No that screen was there for a while till i did Step 4 and dis appeared when i applied that patch on step five ....please see my very first post on top..
gastonw said:
And it shows I9100G.
What happened with the other screen? Does it show up at all?
Sent from the little guy
Click to expand...
Click to collapse
Oh, sorry, now I remember. It was when you flashed something from other site.
So, no DL mode? 100% sure? usb jig is your next step then.
Sent from the little guy
gastonw said:
Oh, sorry, now I remember. It was when you flashed something from other site.
So, no DL mode? 100% sure? usb jig is your next step then.
Sent from the little guy
Click to expand...
Click to collapse
That's what i figured out,
looking on
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/
:good: thanks mate...
Related
i tried flashing it and ionstalling a rom for the first time but it froze halfway through for like 3 hours so i just unplugged it and now this screen comes up...
no whenever i turn it on it gives me a screen with :
a phone .... an explanation mark in a triangle ! . .. . a computer
anything i can do?
also ive tried every button trick on trying to restore it and none of it works all of it just come with that screen. except for the download one where i press volume down home button and power
Robbey said:
i tried flashing it and ionstalling a rom for the first time but it froze halfway through for like 3 hours so i just unplugged it and now this screen comes up...
no whenever i turn it on it gives me a screen with :
a phone .... an explanation mark in a triangle ! . .. . a computer
anything i can do?
also ive tried every button trick on trying to restore it and none of it works all of it just come with that screen. except for the download one where i press volume down home button and power
Click to expand...
Click to collapse
you are really not giving a lot of details here...all you are saying you tried installing a rom and then it froze halfway..
Are you rooted firstly?
If you are have you flashed CF-root kernel?
How did you try to install the rom?
More info and then more people can help you out buddy..see if you can get into recovery and restart your phone.
well... if you've tried "every" (its not like there are a lot) button combination... then just go buy a jig from ebay and force it into download mode...
Matriak31 said:
you are really not giving a lot of details here...all you are saying you tried installing a rom and then it froze halfway..
Are you rooted firstly?
If you are have you flashed CF-root kernel?
How did you try to install the rom?
More info and then more people can help you out buddy..see if you can get into recovery and restart your phone.
Click to expand...
Click to collapse
Nothing from what you said would help..
He obviously flashed it with Odin, and he said he's getting a yellow triangle with a computer behind it..
From what I understood, he could get into download mode.
So just boot into download mode and flash stock ROM. That should do it.
Sent from my GT-I9100 using xda premium
anyone else seeing an increase in the "i bricked my phone" threads?
dont think its coincidence they are increasing after the american variants have been released. People need to check what model they have before flashing things.
OP: not saying thats what has happened to you as you dont say if you have the i9100 or not, hopefully you do.
bruflot said:
Nothing from what you said would help..
He obviously flashed it with Odin, and he said he's getting a yellow triangle with a computer behind it..
From what I understood, he could get into download mode.
So just boot into download mode and flash stock ROM. That should do it.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
well from what he said by his post did not make sense at all..hence why i asked for more details to explain so i could give him a better explanation and guide to fix his problem...but you seem to get what he said so by all means do your thing....but if he comes back with more detail then i will point him to the right direction on what he needs to do...at the end of the day the more opinions he has the better for him
Matriak31 said:
well from what he said by his post did not make sense at all..hence why i asked for more details to explain so i could give him a better explanation and guide to fix his problem...but you seem to get what he said so by all means do your thing....but if he comes back with more detail then i will point him to the right direction on what he needs to do...at the end of the day the more opinions he has the better for him
Click to expand...
Click to collapse
Yes of course
Btw, never ment to insult you in any ways
Sent from my GT-I9100 using xda premium
bruflot said:
Yes of course
Btw, never ment to insult you in any ways
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
its ok and same goes by my post as well buddy..we all been in his position one way or the other
1st - Your phone is not bricked if it show an image. Whatever image it is. The only real software way to brick your phone is to flash bad bootloader or stop a bootloader while they are being flashed. However, Bootloader are flashed first. So if your phone stoped half way, you should not have trouble too much.
Remove the battery from your phone for like a minute, then reboot your phone in download mode (vol- + home + power and when the phone light up, release power.) Then flash another rom from odin.
Also, what rom did you used ? If you flashed a rom for another phone, then you might have flashed bootloader for that phone on yours, which is bad. In this case you will surely need a JIG.
sorry im new to this whole rooting/flashing thing. i downloaded the lightning rom: http://forum.xda-developers.com/showthread.php?t=1095274
i have never rooted or doneanthing to my s2 before. all i did was follow the instructions on the page and thought it would be all good? it froze about a quarter of the way there in odin so i just took my phone out.
I usually find from this state I can get back to bootloader or download states
push and hold vol+ and home then power for bootloader
push and hold vol- and home then power for download
sometimes the phone can seem to freeze a little or even die (this happened to me loads on the galaxy s and once already on the s2) and removing battery sim etc or attaching the charger can jog it
however as other have said a JIG is your friend if for no other reason that even if you recover without it, custom roms up the rom count which some twitchy carriers might invalidate your warranty for, the jig will reset this
you can get them from ebay for less than £3 delivered, or there are instructions on this site for making them yourself if you are so inclined.
simply search 'galaxy s2 jig' on ebay mine was delivered today from portugal as I am way too lazy to make one and only wanted a counter reset anyway
Hi, everyone, I've recently HARD BRICKED my Samsung Galaxy MODEL: T959V with T-mobile. First off, I got pattern locked on my phone, yea I know I'm an idiot, LOL. Next I totally forgot my gmail password so I could not log back into my phone. So then I next decided to flash back to stock with odin 1.7 and T959UVJFD. tar file from this thread: http://forum.xda-developers.com/showthread.php?t=1047087. As a result, my phone would boot to the loading screen with the dashed circle and a battery display in the background and thus would not finish booting all the way. So I figured I would do more research and found that people would try flashing with the Eugene_2E_JK2_Froyo from this thread: http://forum.xda-developers.com/showthread.php?t=833024&page=49 and after flash back to stock. After I flashed with the Eugene rom this was when the phone completely died and would not turn on. I tried the take out the battery, holding down and up volume button and plugging into computer method but the computer would not detect it anymore. Now I don't know what to do. It won't turn on anymore and can't boot into download mode. Please help.. Thanks, and appreciate it.
I just got bricked too...Went to update my vibrant that was on eclair still...Try to update to froyo on Samsung Kies Mini...download went fine...then when finished...it wouldnt turn on....just ordered a JIG....should be here Tuesday...http://www.amazon.com/SainSmart-Don...73JQ/ref=sr_1_1?ie=UTF8&qid=1321751047&sr=8-1
and yes...my family on XDA...i tried every finger combination to try to get to download mode...Sitting outside waiting for ups as we speak...
You might need to look into a jtag, I wouldnt give up getting into download even if the screen is black. Some members have had sucess by pulling the battery, sim card and letting the vibrant settle for an hour or so. reset in odin and keep trying, your phone wont respond but odin may recognize it by the yellow com bubble.
im guessing u've tried this:
http://forum.xda-developers.com/showthread.php?t=848737
also read post #5 in this thread:
http://forum.xda-developers.com/showthread.php?t=1352334
be sure u understand what he says: he's basically just pretending the screen doesnt work and holding the buttons for the amount of time it would take to enter download mode. even tho the screen never responds, odin will suddenly recognize the phone. u can tell when this happens cuz that box in odin turns yellow. then flash JFD like normal or whatever ur gonna do.
good luck
Thanks for replying everyone.
Sugartibbs : I've been working on this all day. Yea, I definitely can't get it to work on odin. It's not being recognized at all. where can i get a jtag?
crypkilla : Yea I definately tried those two things already. I've searched all over the forum. I think it's time to take it in..... LOL. Is there a difference between the two models T959UV vs. T959V, in terms of the stock rom I was originally suppose to use?
that's a bummer.
i havent had a completely unresponsive phone before, but ive thought ive been pretty screwed a few times and the only other thing i know is that ive read people say that they've tried the same thing a hundred times and on the hundred and first time it worked and that's been my experience.
be sure and post if u do get lucky and fix it.
ascensi0n said:
Thanks for replying everyone.
Sugartibbs : I've been working on this all day. Yea, I definitely can't get it to work on odin. It's not being recognized at all. where can i get a jtag?
crypkilla : Yea I definately tried those two things already. I've searched all over the forum. I think it's time to take it in..... LOL. Is there a difference between the two models T959UV vs. T959V, in terms of the stock rom I was originally suppose to use?
Click to expand...
Click to collapse
You flashed wrong ROM and you're in wrong forum.
T-mobile Vibrant is T959
T-mobile Galaxy S 4G is T959V
T959UV is just a baseband not model number.
Sent from my T959 using XDA App
Yea I figured that I flashed the wrong rom after....so is there a way to fix it?
ascensi0n said:
Yea I figured that I flashed the wrong rom after....so is there a way to fix it?
Click to expand...
Click to collapse
First you need to get to download mode. Then try this
http://forum.xda-developers.com/showthread.php?t=1353176
Sent from my T959 using XDA App
ascensi0n said:
Yea I figured that I flashed the wrong rom after....so is there a way to fix it?
Click to expand...
Click to collapse
LOL i did the same thing ended up selling the phone :laugh:
What a start to the day....
Sg2 would not turn on. Tried loads and then left it. Suddenly a few mins later
it came on but was hung on the boot screen. Now its turning on but just hangs
a frozen boot screen.
So thought I would use ODIN to wipe it and start a fresh. Odin also just hangs
at the start at NAND WRITE START cache.img and goes no futher ever.
I tried to do a restore in CWM but again hung and eventually failed with cant find file error messages.
Seems like internal memory is screwed or something any ideas?
Can you get into download mode (power/home/volume down) ?
technotika said:
What a start to the day....
Sg2 would not turn on. Tried loads and then left it. Suddenly a few mins later
it came on but was hung on the boot screen. Now its turning on but just hangs
a frozen boot screen.
So thought I would use ODIN to wipe it and start a fresh. Odin also just hangs
at the start at NAND WRITE START cache.img and goes no futher ever.
I tried to do a restore in CWM but again hung and eventually failed with cant find file error messages.
Seems like internal memory is screwed or something any ideas?
Click to expand...
Click to collapse
Have you tried booting into download mode (as stated above), or using a jig? They cost a few dollars from Ebay, but they're a life saver in these such situations.
Have you tried to flash a different ROM? Maybe the cache.img is a dud or possibly corrupted?
can get into download mode but because a flash failed CWM is gone and just get "firmware update encountered an error".....just tried a different firmware download in odin..again hangs on NAND WRITE START....
read other threads with same error , not looking good
I think a JTAG repair will probably be cheaper for you than paying Samsung to fix it. Do a search on here/Google to find a JTAG repairer close to you. If you can't find one near you, there's at least one that I know of you can post your phone to, have them repair it & they'll post it back.
technotika said:
can get into download mode but because a flash failed CWM is gone and just get "firmware update encountered an error".....just tried a different firmware download in odin..again hangs on NAND WRITE START....
read other threads with same error , not looking good
Click to expand...
Click to collapse
Since the phone already is in "has to be sent in anyways" state, I think this quallifies for the "last resort", only do this as last step before packing it in for sending to service.
Try an Odin flash with a .PIT file and "[X] Repartition" checked.
But be very carefull with that, double check and tripplecheck everything is perfectly set up (correct stock ROM for your model, USB connection could sustain an earthquake, PC will not crash or loose power.... all that stuff) because this could totally kill it when something goes wrong.
Well, once the preflight is done, hit the mighty "Start" button and start to pray.
Well tried ext option and hangs on setting partition. I'm worried the phone is actually proper broken since its not flashing or rom issues that was the original problem. Just went off, wouldnt turn on, left it a while...suddenly on but hanging on boot everytime..then the flashing attempts to realise more broken than ever! Will service fix that?, im with vodafone UK and they will be arsy if they find custom rom flashes etc? Can I send direct to samsung...? thanks for ur help peeps!
technotika said:
Well tried ext option and hangs on setting partition. I'm worried the phone is actually proper broken since its not flashing or rom issues that was the original problem. Just went off, wouldnt turn on, left it a while...suddenly on but hanging on boot everytime..then the flashing attempts to realise more broken than ever! Will service fix that?, im with vodafone UK and they will be arsy if they find custom rom flashes etc? Can I send direct to samsung...? thanks for ur help peeps!
Click to expand...
Click to collapse
Are you using a single file when your trying to flash? I had an issue where it was stuck on the nand part, then I flashed using three files, PDA, Modem, Csc, and it was successful.
But seeing that you've tried repartition and that didn't work, you may be screwed.
Well, if it's that broken that nothing boots, nothing shows, nothing even flashes, I doubt they can see you got a custom ROM on it (Samsung could, but would very likely not bother checking).
So just tell them it failed during updating with KIES.
Since KIES is "teh craps" and everybody know that, they will likely go "oh yah, another one"
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
ultramic said:
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
Click to expand...
Click to collapse
Yeah, I tried to use a data cable that came with an HTC once. For some odd reason, it didn't work.
I've had Odin flashes go.wrong before and almost always fixed it by rebooting or restarting Odin. Maybe even try on a different PC. For me a 3 part file with pit + repartition has always done the trick.
However it does seem like your problem may be hardware related.
Sent from my GT-I9100T
ultramic said:
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
Click to expand...
Click to collapse
I dont think I ever used the original lol have been flashing like crazy for the last 6 months fine?
HellcatDroid said:
Well, if it's that broken that nothing boots, nothing shows, nothing even flashes, I doubt they can see you got a custom ROM on it (Samsung could, but would very likely not bother checking).
So just tell them it failed during updating with KIES.
Since KIES is "teh craps" and everybody know that, they will likely go "oh yah, another one"
Click to expand...
Click to collapse
This is a very good tip, thanks lol, popping into a store at diner time.......
##update## actually download mode loads with custom rom count (24) oops and very new firmware so dont think can get round that?
If they check that you might be in a bit of trouble warranty-wise. Or you might be lucky. If you can wait a few days or however long it takes to get a jig, might be worth getting one.
technotika said:
This is a very good tip, thanks lol, popping into a store at diner time.......
##update## actually download mode loads with custom rom count (24) oops and very new firmware so dont think can get round that?
Click to expand...
Click to collapse
technotika said:
I dont think I ever used the original lol have been flashing like crazy for the last 6 months fine?
Click to expand...
Click to collapse
Regardless, please try the original cable, you have nothing to lose.
For the first few months, I was flashing ROM's fine with an el cheapo usb cable from ebay then suddenly, Odin would always hang. Reverted to original cable and everything has been fine ever since. I have also noticed that the file transfers and Kies Backups are noticeably quicker on the original cable.
Given you can access download mode, I'm crossing my fingers for you that its only a soft brick. Also, try plugging in the usb cable to a port directly on the motherboard (ie not one of those front panel extensions), also try different computers.
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Depends on what version firmware you have on your phone/what you tried to flash. Do you remember either/both of those ?
technotika said:
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Click to expand...
Click to collapse
technotika said:
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Click to expand...
Click to collapse
They don't work the new bootloader, but if you got your ROMs from Intratech's thread, most of them have the bootloaders replaced with the old one.
You could also try to flash the old-bootloader-only .tar that is also in Intratech's thread if the jig doesn't work, maybe it at least manages to flash that one so you can reset the counter.
well it's officially knackered
tried original samsung cable - same problem
different computer - pit and 3 files plus single files , same problem
cant even flash any old bootloaders to reset the jig!
so gutted it ran my life for me schedules, to do, all sorts, oh well
goosed - thanks anyway
Just got the phone today. I rooted it, applied CM mod, went back to stock, then tried to install the Energy HD2 mod to check that out. Installation failed and now it will not even start / turn on. I tried putting it into upload mode, download mode, straight up hit power and turn on - and nothing works.
Any recommendations?
EDIT: Why can't I post a reply to someone here? I see no reply box and it says 'You may not post replies' and 'You may not post new threads'?
Try a good old battery pull.
spamcakes said:
Try a good old battery pull.
Click to expand...
Click to collapse
I did; no luck. Left it out a half hour or more. It's fully charged, too.
But AMZ will have a new one to me tomorrow and I'll return the original.
<3 Amazon.
kinda mess up.. last hoe, usb jig
Try to conect via usb and use odin to make it recognized if doesnt, recovery or download mode doesnt run Try vía adb.
Once and it fails.... Warranty Time
Sent from my GT-I9300 using xda premium
You might already know this already but did you do a factory reset, clear cache etc before going back to stock and the new rom?
synpax said:
Just got the phone today. I rooted it, applied CM mod, went back to stock, then tried to install the Energy HD2 mod to check that out. Installation failed and now it will not even start / turn on. I tried putting it into upload mode, download mode, straight up hit power and turn on - and nothing works.
Any recommendations?
EDIT: Why can't I post a reply to someone here? I see no reply box and it says 'You may not post replies' and 'You may not post new threads'?
Click to expand...
Click to collapse
Why are you trying to put an HD2 mod onto an S3?
colint3 said:
Why are you trying to put an HD2 mod onto an S3?
Click to expand...
Click to collapse
I think he means this:
http://forum.xda-developers.com/showthread.php?t=1735850
and not the HTC HD2 like you understood
check md5 .. it might be bad download ...
Sent from my GT-I9300 using xda premium
mrlove6 said:
I think he means this:
http://forum.xda-developers.com/showthread.php?t=1735850
and not the HTC HD2 like you understood
Click to expand...
Click to collapse
Then I need to say sorry for my mistake.
Colin
Mickyman said:
You might already know this already but did you do a factory reset, clear cache etc before going back to stock and the new rom?
Click to expand...
Click to collapse
Yes, I did. Thanks.
First of all, why the f... are u flashing so many roms at [email protected]#$$%€£…
Now the air is clean. Can u get into download mode? If yes,then go to samfirmware.com and register then download LFB rom to your PC and flash it with Odin, then root it with cf-root.
now DO NOT FLASH ANYTHING ELSE FOR 24 HOURS. let the phone settle.and instead read the OP and check screenshots of the different roms and find one. Also check out the "apps & theme" forum and look for suitable theme instead of flashing a full rom.
Ps. If u can't get into "download mode" then order a USB JIG(301 ohms exactly) from ebay.
Good luck.....but stop your flashing mania or your phone is a goner.
EDIT: Pull out your battery for 20 min,put it back then use 3 button combo to get to download mode..
Btw cm7-9-10 is for experienced users not for noobs.
zodiaxe66 said:
First of all, why the f... are u flashing so many roms at [email protected]#$$%€£…
Now the air is clean. Can u get into download mode? If yes,then go to samfirmware.com and register then download LFB rom to your PC and flash it with Odin, then root it with cf-root.
now DO NOT FLASH ANYTHING ELSE FOR 24 HOURS. let the phone settle.and instead read the OP and check screenshots of the different roms and find one. Also check out the "apps & theme" forum and look for suitable theme instead of flashing a full rom.
Ps. If u can't get into "download mode" then order a USB JIG(301 ohms exactly) from ebay.
Good luck.....but stop your flashing mania or your phone is a goner.
EDIT: Pull out your battery for 20 min,put it back then use 3 button combo to get to download mode..
Btw cm7-9-10 is for experienced users not for noobs.
Click to expand...
Click to collapse
1. I'm not a newb.I've been running CM nightlies for over a year.
2. The feature sets for the roms are different and I don't see why I can't try them. Energy seemed more mature for the S3 and I think I would prefer a stock-based rom that just cut out the bloat.
3. Tried the battery pull thing. Odin did not recognize a device being connected. It was like there was no battery in it at all. The USB JIG idea sounds interesting. NExt time I have an issue, I'll look into that.
4. Thanks for your help but the new phone is here today and the brick goes back.
go here http://mtechservice.com/contacus.html
this guy not use any soldering for S3 SGH-i747M or T999 to jtag the phone
the hole repair is done in 10 minutes
the best service ever
hi there
hello ^_^ my first post and make sure you leave your phone charging for at least 2 hours and try again because it happened to me too and i panicked
Hello everybody,
I have ran into lot of issues in my Samsung Galaxy S3 I-9300. I bought it from UK(unlocked) two years ago.
The issue started with the recharge issues. It shows as it is charging but it doesn't charge and some times the battery suddenly increases by 30-50% on phone restart. And then one day I started encountering phone restart issue. I started losing files that I had copied or created during those times on my external SD card. I once saw that I had android robot fallen with red exclamation mark in the recovery screen. And then one day my phone won't go ahead of Samsung logo so I did a factory reset. After factory reset I thought everything will be fine but still I had few issues so I installed Kies and did a firmware upgrade from the Samsung site. But the recovery robot was still down with red exclamation mark. I thought rooting will help me in fixing it so I rooted the phone but no help. I finally installed stock recovery from odin and it fixed it. Everything looked fine. But I still had files getting deleted from SD card and phone auto restart issue. And recharging issue resurfaced as well and I was not able to recharge from wall charger. I had to switch off my mobile and recharge it from USB cable. I keep it overnight for approx. 8-9 hours at a stretch ans still charging would be around 60-70%. Yesterday my phone restarted on its own and now its getting stuck at Galaxy logo screen. Its not even going to Samsung screen. I can't go to recovery mode but I can still go to download mode. I tried installing stock recovery firmware today from odin and it failed. I can install stock image from odin but I want some solution as I can't keep on doing it again and again.
P.S: I did factory reset twice and after factory reset every time I restart few old applications were getting installed automatically which I had not selected.
Please help me guys.
Update:
Tried flashing stock recovery and stock rom. Nothing worked. Have took capture of the ODIN screen to give more clear idea. Thanks.
deleted
I have added screenshot. Please take a look and help me people. I am really stuck. Thanks.
Can anybody please help me ? Atleast tell if it is possible to recover my mobile or not. Thanks and Happy New Year!!
Can somebody please give me a link to S3 Original Kernel file so that can try flashing it. Thanks
crazy access said:
Can somebody please give me a link to S# Original Kernel file so that can try flashing it. Thanks
Click to expand...
Click to collapse
Try the rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735 << there are two versions you will find the pit file in the 4.1 version download. If this fails or issues come back then it will need service repair.
Bro, it isn´t a software problem, its your battery, it needs to be changed
adaltavo said:
Bro, it isn´t a software problem, its your battery, it needs to be changed
Click to expand...
Click to collapse
I agree he may have a battery problem but that would not explain all the other issues with Odin and recovery etc. I would still recommend flashing rescue firmware first before paying out for a new battery.
Yeah, I guess he might have some problems with his rom, but is kinda wierd too. Hey Crazy Access, have you tried access to recovery from an apk?, some of them do it, like Quick Reboot, or quick boot, search for them in Google play, take a look on it
Thanks for the replies tallman43 and adaltavo.
Adaltavo, my phone is not booting at all. It's not going beyond S3 screen to Samsung logo so I can't try recovery from any apk.
I am going to try recovery method in the link provided by tallman43 and will come back with the results.
Meanwhile, if you have any other tips do tell me.
Thanks.
adaltavo said:
Yeah, I guess he might have some problems with his rom, but is kinda wierd too. Hey Crazy Access, have you tried access to recovery from an apk?, some of them do it, like Quick Reboot, or quick boot, search for them in Google play, take a look on it
Click to expand...
Click to collapse
Hi. I tried following the steps in rescue link and still was not able to fix it. I have attached screenshot of the error. Hope it gives you more clarity where I am stuck.
Any help is appreciated.
In ODIN Mode my screen reads:
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: Yes (2 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Ring a bell ??
crazy access said:
Hi. I tried following the steps in rescue link and still was not able to fix it. I have attached screenshot of the error. Hope it gives you more clarity where I am stuck.
Any help is appreciated.
Click to expand...
Click to collapse
You did not read the instructions in the rescue thread I gave you!! Are you seriously trying to brick your device? Why have you got nand erase all ticked in Odin this is a bad move where does it say to tick this!
Sorry to be harsh but you need to read instructions fully before attempting anything with your phone.Ttry again with Odin and follow the instructions exactly as posted in the screenshot in the rescue thread also maybe try Odin 1.85. But it looks like you have messed up your device even more. (Recommend Service repair) :crying:
Hi tallman. Thanks for the response. I actually downloaded the file from the link you gave, and there were four files but there was no pit file in it. So when I did search again in the forum for pit file I got another link where a user had the same problem and he did ticked the options so I tried that as well. And you were not harsh. It is irritating when you are trying to help and I didn't read the instructions carefully
I will try again and post results here.
Thanks for the help once again
tallman43 said:
You did not read the instructions in the rescue thread I gave you!! Are you seriously trying to brick your device? Why have you got nand erase all ticked in Odin this is a bad move where does it say to tick this!
Sorry to be harsh but you need to read instructions fully before attempting anything with your phone.Ttry again with Odin and follow the instructions exactly as posted in the screenshot in the rescue thread also maybe try Odin 1.85. But it looks like you have messed up your device even more. (Recommend Service repair) :crying:
Click to expand...
Click to collapse
After trying everything the ODIN still failed, so went to service station where they told that internal memory is corrupt and I need to replace motherboard. Thanks tallman and adaltavo for trying to help me out. Appreciate it. Hunting for new phone now.