Related
I'm getting ready to return my Nook Tablet and I want to make sure I've left no trace of my dasterdly rooting deeds. I erased and deregistered to clear the device, then I loaded the acclaim zip via sd card, which I believe will restore everything, correct me if I'm wrong.
I did run nook and zergy again because it said it had a root check, it offered to root, I said no to everything, and after I said no the last thing, it rebooted my device and I now have windows driver issues so I can't go through nook and zergy until I remember the crap I did to make the driver stuff work the first time.
Would nook and zergy have offered to root in the first place if it detected I was already rooted? Or does the root check only happen after say you do want to root? Is there another way to check to ensure I am unrooted?
Thanks
The root check is in the very beginning next to the device check, you're unrooted.
Indirect said:
The root check is in the very beginning next to the device check, you're unrooted.
Click to expand...
Click to collapse
Thanks
I'm no fan of Barnes and Noble these days, but the devs here are beyond amazing. Good luck all.
Picked up an NT finally now that the CM9 looks like it is around the corner.
NT came OOB with 1.4.1... but I'm confused as to which way to best root it? Mind you I've never rooted a device before, JB iPhones yes... first real Android device (other than my Android running over WM on my HTC Touch Pro 2).
From the DEV section it looks like 1.4.1 can be rooted without having flash back to 1.4.0... but it appears it's not 100%. I try to avoid flashing whole updates as much as possible... I'm an old school electronics guy where EEPROMs were good for 20-30 writes before they went in the bin.
So if it's possible I would rather root a 1.4.1 and block OTA... or should I just do the 1.4.0 downgrade that also installs CWM?
IMHO I would revet back to 1.4.0 using This
And then Root using This
From your comments I believe you have already visited the the 2nd thread I linked. Do NOT use any of the files from the OP. Brianf21 posted a file yesterday that is the zero'd out image (smaller) with his latest Update.zip all in one file. It's the only file you will need. Use that file and skip any steps that say to copy update.zip to the Root of the SD card.
There is controversy as to if rooting 1.4.1 using that method leaves side-loading intact. Some say yes, some no. Avoid the controversy and REVERT to 1.4.0.
My .02
Edit: I spoke incorrectly. You will need the file linked in post 14 if you will be using the windows method as it contains the Image Flashing routine. Just use Brian's file when the instructions tell you to browse for the image.
I ended up just using Brian's image from yesterday over 1.4.1... so far so good, have the GApps, can DL from the market, etc.
If anything gets weird, I'll drop down to 1.4.0 and re-root.
quid246 said:
I ended up just using Brian's image from yesterday over 1.4.1... so far so good, have the GApps, can DL from the market, etc.
If anything gets weird, I'll drop down to 1.4.0 and re-root.
Click to expand...
Click to collapse
Can you side-load app's?
Does the unknown sources toggle remain checked?
Is NTHiddenSettings functioning properly?
Thanks!
Edit: Saw your post in the other thread. Guess the answer to the above is NO...
Yeah, I think the 1.4.1 sideloading isn't a 100% guarantee. Perhaps if the NT was at 1.4.0 and then upgraded, there might be something that allows it to be re-opened.
But for a factory fresh 1.4.1... I think it's a no-go.
Will revert to 1.4.0 tomorrow and re-root.
Do I still need to block OTA with Brianf's image or does it cover that?
quid246 said:
Do I still need to block OTA with Brianf's image or does it cover that?
Click to expand...
Click to collapse
I did .... using the Titanium Method (3 files). My version now shows 9.9.9
I too am running 1.4.1 and rooted using Brian's update.zip. The Unknown Sources doesn't stay ticked, and the hack to get it working doesn't work. But I can sideload apps using adb, no problems. I've gotten several live wallpapers I'd be collecting over the last few weeks installed.
I managed to sideload SQLite Editor and manually did the FOTA changes and also edit the "Install_Non_Market_Apps" key in the Settings.db file.
Managed to install Amazon and side-load a bunch of other stuff since. Dunno if the key setting will survive a reboot, will try later tonight.
EDIT: It appears as if doing a manual edit in Settings.db will allow sideloading even after reboot.
I'm searching and thinking. My NT has 1.4.0 I keep turning off WiFi so it can't be updated. Seems to be many options to root to block OTA's. Is the simplest, most safe way to use the SD card route with I think version 4.5? I keep reading instructions from Indirect and Albert and others, but not sure which way to go.
I would like for this tablet to be a fully functional Android unit. Just a little timid.
Thanks a Bunch
Ron
Yeah, I definitely think the most simple method is to use Albert's verison 4.5 SD card method.
I rooted my NT two days ago using Albert's SD card method (thanks!), and thought I had for sure used NT Hidden Settings to block OTA. This morning I saw that the update had been applied, and a few things on my NT are now broken.
Now I cannot access the market.
Other gapps are broken now too including Talk, Currents, and gmail.
Can I just follow the steps to make an SD card and re-apply root, or do I need to do a wipe or reset first?
What are my options?
Thanks everyone!
I had this happen to me on 1.4.0 I just started all over and MADE sure I seen the 9.9.9
So I would just re-flash my SD-card with CWM, boot into CWM, wipe, and start over again? I'm fine with starting over, I just want to make sure I don't mess anything up during the reset process!
tf144 said:
So I would just re-flash my SD-card with CWM, boot into CWM, wipe, and start over again? I'm fine with starting over, I just want to make sure I don't mess anything up during the reset process!
Click to expand...
Click to collapse
yes, that is what you have to do
~ Veronica
tf144 said:
So I would just re-flash my SD-card with CWM, boot into CWM, wipe, and start over again? I'm fine with starting over, I just want to make sure I don't mess anything up during the reset process!
Click to expand...
Click to collapse
FWIW, If you re-root with Albert's SD Card Method (4.50), blocking future ota updates is a simple one click process (it's now an option in NT Settings). Or, just sideload the latest NT Settings (released on 2/15) and you're good to go.
Bob
back up and running
Ok, so I wiped and re-rooted and now everything's just about back to normal. I've tried the built-in OTA block a few times, but my version number still says 1.4.2. Maybe it's like the unknown sources setting and I have to reboot or wait awhile...
I'll just make sure to make some backups this time. Good news is albert's method still works on 1.4.2, but he knew that already I guess.
I'll be back if anything goes wrong, but thanks everyone!
I purposefully updated mine to 1.4.2 (from 1.4.1 rooted) and was able to use brianf21's bootable root sd card successfully without having to wipe anything.
1.4.2 is completely rootable, I was able to use CWM with a flash zip to get it all on there. I'm hoping to release my work this weekend, I'm just waiting for some files that should allow it to work for 8GB devices too.
tf144 said:
Good news is albert's method still works on 1.4.2, but he knew that already I guess.
Click to expand...
Click to collapse
He method and files till work for 1.4.2? Great, I just bought my NT the other day.
I just got my new NT in the mail. Should I use the sd card method over the system it has, or should I go back to 1.4.0 and root that. My wifes NT is 9.9.9 and works well. Also, I don't have a sd card yet, is there anyway to root my new tablet without going to the store? (looks like the tablet shipped with 1.4.1)
Thanks
You could just order an n2a card and be done with it. No rooting and you'll have an Android tablet when the n2a card arrives.
Tel864 said:
You could just order an n2a card and be done with it. No rooting and you'll have an Android tablet when the n2a card arrives.
Click to expand...
Click to collapse
Or you could avoid n2a and all of their schemes. Everything they offer is available for free and they are truly assholes for selling it. I don't give a **** it you are "just selling the sdcard" They are a **** company making profit from the folks that put in all the effort.
I rooted my wife's Nook and my phone, so I should be able to complete root without buying someone's card, just wondering if I should go back to 1.4.0 or root 1.4.1.
fyrmd said:
I rooted my wife's Nook and my phone, so I should be able to complete root without buying someone's card, just wondering if I should go back to 1.4.0 or root 1.4.1.
Click to expand...
Click to collapse
root 1.4.1 and block ota updates its extremely easy
fyrmd said:
I rooted my wife's Nook and my phone, so I should be able to complete root without buying someone's card, just wondering if I should go back to 1.4.0 or root 1.4.1.
Click to expand...
Click to collapse
Rooting via the SD card methods available works on any firmware released. Rooting 1.4.2 gives you the latest bug fixes from B&N though.
fyrmd said:
I rooted my wife's Nook and my phone, so I should be able to complete root without buying someone's card, just wondering if I should go back to 1.4.0 or root 1.4.1.
Click to expand...
Click to collapse
I'd just use one of the root cards and root 1.4.2
Updated to 1.4.2 lost my market
I rooted my nt when it had 1.4.1 on it, then two day's ago the update came out, I never saw 9.9.9 on my os info, My nook is still rooted I think anyway, no market and gmail. But I can still install apk's from my sd card.
What should I do to get my market working? And also make sure I can block OTA updates? Thank You.
lessworkmoreplay said:
I rooted my nt when it had 1.4.1 on it, then two day's ago the update came out, I never saw 9.9.9 on my os info, My nook is still rooted I think anyway, no market and gmail. But I can still install apk's from my sd card.
What should I do to get my market working? And also make sure I can block OTA updates? Thank You.
Click to expand...
Click to collapse
I personally think blocking OTAs is a little silly considering how easy this device is becoming to root. However to get Market back and stuff all you have to do is take one of the sd root methods and use that, this will restore the files to /system that got removed by the OTA
Checkit
OTA block by Indirect's 9.9.9 Titanium Patch and CWM recovery flash
I believe that 9.9.9 patch prevents the file from every being downloaded and I believe the custom recovery prevents the File from ever installing. Any OTA that comes down from Barnes and Noble Requires STOCK recovery to install.
I also prove my Root SD cards will Root the 1.4.2 updated 16gb Nook Tablet!
http://www.youtube.com/watch?feature=player_embedded&v=8AUMKvxnI9M
when powering back on nook it says reset to factory
{So I have used your method before but now when I go to reboot after making a root card all it says is would you like to restore to factory settings, I have also tired using the usb to boot up when the others failed. Now I am stuck with a stock nook with 1.4.2. Am I missing something?}
So after downloading 4.6 everything worked perfect, and got the 9.9.9
Thanks for the hard work.
As I only recently purchased the Nook Tablet 16gb with version 1.4.2. There is overflow of information in these forums that has confused me and need some direction. I would like to know if the first thing I should do is to Root it and disable the OTA updates? (eventually I will want to install a stable version of CM9 ICS)
If so, which method is the best to do this? Does rooting happen internally on the NT or do I have to have something set on the SD all the time?
What other abilities will this give me?
Is there a huge benefit to rolling back to 1.4.0 (is it even possible?)?
Guidance will be much appreciated. Thanks !
If you use B&N services/apps then i would stick with stock but 1.4.0 as is the best, no limitations about sideloading which is a must have.
If not still stock is ok i like the eye candy, but if you go for complete access to google play (android market) access then i would go for MIUI, CM7 or CM9.
And better way learn from them is to try them all. My fav is MIUI i love the interface is similar to stock actually in the way of the settings, menus, buttons.
~ Veronica
Thanks for the response Veronica.
Are you saying that if I just want to stay at a rooted state with stock B&N then I should downgrade to 1.4.0 and then root?
Also, are you recommending that if not using any B&N serviced, which I'm not using any B&N services, then I should Downgrade to 1.4.0, root and then load MIUI (or other Rom)?
I would like to take some baby steps and try to really learn as I go along. For instance I've seen CMW being mentioned many times and I haven't been able to find how exactly I install it on the NT. Also ADB for 'pushing' installs onto the NT and I haven't been able find guide for it. Do I need to use both CWM and ADB or ADB first to install CWM and then use CWM to install. And how do these fit with the Rooting processes and is all this done on the microSD card or internally on the NT? I'm just so confused in EXACTLY where does one start.
I installed ICS on the HP Touchpad and that was soooooo easy compared to what I'm finding with the NT.
Thanks again.
jbl0ggs said:
Thanks for the response Veronica.
Are you saying that if I just want to stay at a rooted state with stock B&N then I should downgrade to 1.4.0 and then root?
Also, are you recommending that if not using any B&N serviced, which I'm not using any B&N services, then I should Downgrade to 1.4.0, root and then load MIUI (or other Rom)?
I would like to take some baby steps and try to really learn as I go along. For instance I've seen CMW being mentioned many times and I haven't been able to find how exactly I install it on the NT. Also ADB for 'pushing' installs onto the NT and I haven't been able find guide for it. Do I need to use both CWM and ADB or ADB first to install CWM and then use CWM to install. And how do these fit with the Rooting processes and is all this done on the microSD card or internally on the NT? I'm just so confused in EXACTLY where does one start.
I installed ICS on the HP Touchpad and that was soooooo easy compared to what I'm finding with the NT.
Thanks again.
Click to expand...
Click to collapse
Oh you really don't know where to start, i know with all what we have going right now it can be very confusing BUT for your luck @AlbertWertz have made so many videos explaining step by step of almost everything the rooting part eather internally by using adb and external by using an sdcard.
The main idea is ok i have a 16GB NT with stock 1.4.2 i like and use B&N apps i was to stick with stock but i wan't be able to use the most features as possible and not figure it out and troubleshoot so many things in the way then for those people i recommend stock 1.4.0 simple than that.
Albert and I have posted modified, rooted stock 1.4.0 ROM's so you simply get into CWM and flash them, period.
But If you are the kind of person and also want to learn how to do it from scratch and modify to your taste then use one of the so many methods posted in development section to root: there are 2 options root by using adb and root by using a bootable sdcard.
Brief history of the creation of the sdcard method: many users were having issues setting up adb and making drivers for nook tablet get recognized by windows so they were not able to root so it is why sdcard method was released. and as users were having issues setting up sdcard aswell was created the "burn this image to your sdcard with win32diskimager", method which still some users have issues and i remember have read of one user that after user that bricked his device using the last method mentioned... Oh well there is always risk!!!
PROS OF SDCARD METHOD: no use of PC
CONS OF SDCARD METHOD: you still have to setup your sdcard, format it with fat32 file system and set first partition to Active or LBA: boot (linux) and if that does work then burn the root image using to your sdcard win32diskimager.
...Wot you thought was going to be that easy? nah...
By the other hand if you are the kind of user that don't use (maybe hate) B&N service/apps then good news you have 3 options to pick from: CM7, CM9 and MIUI.
Now if you want to go straight to one of the ROM's mentioned (CM7, CM9 or MIUI) then you simply can prepare a sdcard to boot ClockworkMod (CWM) from it . For that please check here -METHOD #1 and here to know how to set it up!.
Once you re able to boot into CWM from sdcard you can now go ahead and download the ROM of your preference, copy it to your internal sdcard (MyNOOK) and flash it in CWM >> Install .zip from sdcard >> choose .zip from internal sdcard >> pick the copied .zip package and flash it, reboot device and VOILA!
---------------------------------
PS: the link to Albert's video tutorials and to my How-to's/tutorials and videotutorials please read my FAQ, is located in general section and the link has been in my signature for long time now. See below (signature).
Alberts videos are in post #2 of my FAQ. Check his channel (link there) for more videos.
There you will find my tutorial for install and use ADB, and as i say San google is your friend you can find anything refering to the nook tablet if you google like this:
"adb tool" nook tablet,xda
"root" nook tablet,xda
"sdcard root" nook tablet, xda ... etc.
~ Veronica
Veronica
I have two nt one with rooted 1.40 and the second is stock 1.42 with B&N repartion. I am concerned that I might have problems with Installing CM7 because of the B&N 1.42 partions. Shoudd I create a sd with CWM and CM7 I don't use B&N at all.
All the Best
jbl0ggs said:
As I only recently purchased the Nook Tablet 16gb with version 1.4.2. There is overflow of information in these forums that has confused me and need some direction. I would like to know if the first thing I should do is to Root it and disable the OTA updates? (eventually I will want to install a stable version of CM9 ICS)
If so, which method is the best to do this? Does rooting happen internally on the NT or do I have to have something set on the SD all the time?
What other abilities will this give me?
Is there a huge benefit to rolling back to 1.4.0 (is it even possible?)?
Guidance will be much appreciated. Thanks !
Click to expand...
Click to collapse
First thing I would do is go back to BN and have them repartition it for you. It will wipe everything from your nook when you do this but if you just started with it then there is no need for worry.
After that just root it and you will be able to sideload any app you want and have access to the market.
I haven't really read why 1.40 is "better" but mine and my buddies are on 1.42 and can do anything we need to with it after being rooted.
lavero.burgos said:
[snip]
PS: the link to Albert's video tutorials and to my How-to's/tutorials and videotutorials please read my FAQ, is located in general section and the link has been in my signature for long time now. See below (signature).
Alberts videos are in post #2 of my FAQ. Check his channel (link there) for more videos.
There you will find my tutorial for install and use ADB, and as i say San google is your friend you can find anything refering to the nook tablet if you google like this:
"adb tool" nook tablet,xda
"root" nook tablet,xda
"sdcard root" nook tablet, xda ... etc.
~ Veronica
Click to expand...
Click to collapse
Thank you so much for all your help !!!
captkrunch said:
Veronica
I have two nt one with rooted 1.40 and the second is stock 1.42 with B&N repartion. I am concerned that I might have problems with Installing CM7 because of the B&N 1.42 partions. Shoudd I create a sd with CWM and CM7 I don't use B&N at all.
All the Best
Click to expand...
Click to collapse
I know this question wasn't addressed for me, but the answer to your question is that it wouldn't matter. If you repartitioned your device at B&N it just changes the space allocated for the different partitions and won't affect the ability to install CM7. Though I believe with 1.4.2 you would need to boot your device via the charging cable to have it run from the sd card, whether it be CWM or CM7. How you install CWM and flash CM7 is up to you on that part.
cbarth3 said:
First thing I would do is go back to BN and have them repartition it for you. It will wipe everything from your nook when you do this but if you just started with it then there is no need for worry.
After that just root it and you will be able to sideload any app you want and have access to the market.
I haven't really read why 1.40 is "better" but mine and my buddies are on 1.42 and can do anything we need to with it after being rooted.
Click to expand...
Click to collapse
Hmm, if just by rooting you are able to install any Android app, then what is the need to load CM7, CM9 or MIUI?
With the stock nook root, Google Play doesn't recognize the nook as a proper android and there are lot of games or apps unavailable to you even if you try to modify the build.prop files within the system folder to mimic another device (i tried T_T)
I personally didn't like any of the barnes and noble interface thats why I went for CM7. I was kind of hoping for bluetooth as well, but from what I'm reading on the android dev part of the forums, the hardware might not support it. With CM7/CM9 it's just more customizable so if you were looking for a cheaper tablet alternative you would root it through those means. But if you like the barnes and noble content, you would root it through stock.
Also with videos, I'm not entirely sure, but I believe with the stock root, even with MX player, HW decoding is only available to mp4 formats, while on CM7 and the other roots, you have larger variety:
"HW Decoding is limited to 3GP, 3G2, MP4, M4V, MKV, WEBM, H.264 (Baseline/Main/High profile) up to 1920x1080, MPEG-4 Simple/Advanced Simple profile up to 1920x1080, & H.263" <- succulent in another post
I'm the in exact position of the OP. Someone gave me a Nook Tablet the other day and all the root/ROM info out there in overwhelming to take in.
Some people are saying there's issues booting to an SD card with 1.4.2, some people don't seem to have a problem. What's the deal here? I've followed every guide to a T and can't get mine to boot off an SD card so I can flash CWM...
(I don't intend for this to be a thread jack. I'm hoping it will also help the OP)